diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250_bcm2835aux.c | 12 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_fsl.c | 108 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_ingenic.c | 20 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_mtk.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 64 |
5 files changed, 166 insertions, 39 deletions
diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c index 12d03e678295..fd95860cd661 100644 --- a/drivers/tty/serial/8250/8250_bcm2835aux.c +++ b/drivers/tty/serial/8250/8250_bcm2835aux.c @@ -110,12 +110,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) /* get the clock - this also enables the HW */ data->clk = devm_clk_get(&pdev->dev, NULL); - ret = PTR_ERR_OR_ZERO(data->clk); - if (ret) { - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, "could not get clk: %d\n", ret); - return ret; - } + if (IS_ERR(data->clk)) + return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could not get clk\n"); /* get the interrupt */ ret = platform_get_irq(pdev, 0); @@ -155,9 +151,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev) /* register the port */ ret = serial8250_register_8250_port(&up); if (ret < 0) { - if (ret != -EPROBE_DEFER) - dev_err(&pdev->dev, - "unable to register 8250 port - %d\n", ret); + dev_err_probe(&pdev->dev, ret, "unable to register 8250 port\n"); goto dis_clk; } data->line = ret; diff --git a/drivers/tty/serial/8250/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c index 0d0c80905c58..c3582d8938d6 100644 --- a/drivers/tty/serial/8250/8250_fsl.c +++ b/drivers/tty/serial/8250/8250_fsl.c @@ -1,15 +1,12 @@ // SPDX-License-Identifier: GPL-2.0 -#include <linux/serial_reg.h> -#include <linux/serial_8250.h> - -#include "8250.h" - /* * Freescale 16550 UART "driver", Copyright (C) 2011 Paul Gortmaker. + * Copyright 2020 NXP + * Copyright 2020 Puresoftware Ltd. * * This isn't a full driver; it just provides an alternate IRQ - * handler to deal with an errata. Everything else is just - * using the bog standard 8250 support. + * handler to deal with an errata and provide ACPI wrapper. + * Everything else is just using the bog standard 8250 support. * * We follow code flow of serial8250_default_handle_irq() but add * a check for a break and insert a dummy read on the Rx for the @@ -20,6 +17,16 @@ * IRQ event to the next one. */ +#include <linux/acpi.h> +#include <linux/serial_reg.h> +#include <linux/serial_8250.h> + +#include "8250.h" + +struct fsl8250_data { + int line; +}; + int fsl8250_handle_irq(struct uart_port *port) { unsigned char lsr, orig_lsr; @@ -79,3 +86,90 @@ int fsl8250_handle_irq(struct uart_port *port) return 1; } EXPORT_SYMBOL_GPL(fsl8250_handle_irq); + +#ifdef CONFIG_ACPI +static int fsl8250_acpi_probe(struct platform_device *pdev) +{ + struct fsl8250_data *data; + struct uart_8250_port port8250; + struct device *dev = &pdev->dev; + struct resource *regs; + + int ret, irq; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!regs) { + dev_err(dev, "no registers defined\n"); + return -EINVAL; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + if (irq != -EPROBE_DEFER) + dev_err(dev, "cannot get irq\n"); + return irq; + } + + memset(&port8250, 0, sizeof(port8250)); + + ret = device_property_read_u32(dev, "clock-frequency", + &port8250.port.uartclk); + if (ret) + return ret; + + spin_lock_init(&port8250.port.lock); + + port8250.port.mapbase = regs->start; + port8250.port.irq = irq; + port8250.port.handle_irq = fsl8250_handle_irq; + port8250.port.type = PORT_16550A; + port8250.port.flags = UPF_SHARE_IRQ | UPF_BOOT_AUTOCONF + | UPF_FIXED_PORT | UPF_IOREMAP + | UPF_FIXED_TYPE; + port8250.port.dev = dev; + port8250.port.mapsize = resource_size(regs); + port8250.port.iotype = UPIO_MEM; + port8250.port.irqflags = IRQF_SHARED; + + port8250.port.membase = devm_ioremap(dev, port8250.port.mapbase, + port8250.port.mapsize); + if (!port8250.port.membase) + return -ENOMEM; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->line = serial8250_register_8250_port(&port8250); + if (data->line < 0) + return data->line; + + platform_set_drvdata(pdev, data); + return 0; +} + +static int fsl8250_acpi_remove(struct platform_device *pdev) +{ + struct fsl8250_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + return 0; +} + +static const struct acpi_device_id fsl_8250_acpi_id[] = { + { "NXP0018", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(acpi, fsl_8250_acpi_id); + +static struct platform_driver fsl8250_platform_driver = { + .driver = { + .name = "fsl-16550-uart", + .acpi_match_table = ACPI_PTR(fsl_8250_acpi_id), + }, + .probe = fsl8250_acpi_probe, + .remove = fsl8250_acpi_remove, +}; + +module_platform_driver(fsl8250_platform_driver); +#endif diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c index dde766fa465f..988bf6bcce42 100644 --- a/drivers/tty/serial/8250/8250_ingenic.c +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -259,22 +259,14 @@ static int ingenic_uart_probe(struct platform_device *pdev) return -ENOMEM; data->clk_module = devm_clk_get(&pdev->dev, "module"); - if (IS_ERR(data->clk_module)) { - err = PTR_ERR(data->clk_module); - if (err != -EPROBE_DEFER) - dev_err(&pdev->dev, - "unable to get module clock: %d\n", err); - return err; - } + if (IS_ERR(data->clk_module)) + return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_module), + "unable to get module clock\n"); data->clk_baud = devm_clk_get(&pdev->dev, "baud"); - if (IS_ERR(data->clk_baud)) { - err = PTR_ERR(data->clk_baud); - if (err != -EPROBE_DEFER) - dev_err(&pdev->dev, - "unable to get baud clock: %d\n", err); - return err; - } + if (IS_ERR(data->clk_baud)) + return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_baud), + "unable to get baud clock\n"); err = clk_prepare_enable(data->clk_module); if (err) { diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 7b0dec14c8b8..41f4120abdf2 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -669,6 +669,7 @@ static int __init early_mtk8250_setup(struct earlycon_device *device, return -ENODEV; device->port.iotype = UPIO_MEM32; + device->port.regshift = 2; return early_serial8250_setup(device, NULL); } diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 55bb7b897d97..d5a513efb261 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1776,6 +1776,39 @@ pci_wch_ch38x_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } + +#define CH384_XINT_ENABLE_REG 0xEB +#define CH384_XINT_ENABLE_BIT 0x02 + +static int pci_wch_ch38x_init(struct pci_dev *dev) +{ + int max_port; + unsigned long iobase; + + + switch (dev->device) { + case 0x3853: /* 8 ports */ + max_port = 8; + break; + default: + return -EINVAL; + } + + iobase = pci_resource_start(dev, 0); + outb(CH384_XINT_ENABLE_BIT, iobase + CH384_XINT_ENABLE_REG); + + return max_port; +} + +static void pci_wch_ch38x_exit(struct pci_dev *dev) +{ + unsigned long iobase; + + iobase = pci_resource_start(dev, 0); + outb(0x0, iobase + CH384_XINT_ENABLE_REG); +} + + static int pci_sunix_setup(struct serial_private *priv, const struct pciserial_board *board, @@ -1867,6 +1900,7 @@ pci_moxa_setup(struct serial_private *priv, #define PCIE_VENDOR_ID_WCH 0x1c00 #define PCIE_DEVICE_ID_WCH_CH382_2S1P 0x3250 #define PCIE_DEVICE_ID_WCH_CH384_4S 0x3470 +#define PCIE_DEVICE_ID_WCH_CH384_8S 0x3853 #define PCIE_DEVICE_ID_WCH_CH382_2S 0x3253 #define PCI_VENDOR_ID_ACCESIO 0x494f @@ -2642,6 +2676,16 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = pci_wch_ch38x_setup, }, + /* WCH CH384 8S card (16850 clone) */ + { + .vendor = PCIE_VENDOR_ID_WCH, + .device = PCIE_DEVICE_ID_WCH_CH384_8S, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .init = pci_wch_ch38x_init, + .exit = pci_wch_ch38x_exit, + .setup = pci_wch_ch38x_setup, + }, /* * ASIX devices with FIFO bug */ @@ -2751,15 +2795,6 @@ static struct pci_serial_quirk *find_quirk(struct pci_dev *dev) return quirk; } -static inline int get_pci_irq(struct pci_dev *dev, - const struct pciserial_board *board) -{ - if (board->flags & FL_NOIRQ) - return 0; - else - return dev->irq; -} - /* * This is the configuration table for all of the PCI serial boards * which we support. It is directly indexed by the pci_board_num_t enum @@ -2913,6 +2948,7 @@ enum pci_board_num_t { pbn_fintek_F81512A, pbn_wch382_2, pbn_wch384_4, + pbn_wch384_8, pbn_pericom_PI7C9X7951, pbn_pericom_PI7C9X7952, pbn_pericom_PI7C9X7954, @@ -3650,6 +3686,13 @@ static struct pciserial_board pci_boards[] = { .uart_offset = 8, .first_offset = 0xC0, }, + [pbn_wch384_8] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 115200, + .uart_offset = 8, + .first_offset = 0x00, + }, /* * Pericom PI7C9X795[1248] Uno/Dual/Quad/Octal UART */ @@ -5566,6 +5609,9 @@ static const struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_wch384_4 }, + { PCIE_VENDOR_ID_WCH, PCIE_DEVICE_ID_WCH_CH384_8S, + PCI_ANY_ID, PCI_ANY_ID, + 0, 0, pbn_wch384_8 }, /* * Realtek RealManage */ |