diff options
Diffstat (limited to 'drivers/tty/serial/8250')
| -rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 5 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 36 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.c | 3 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_dwlib.h | 33 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 25 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 13 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pxa.c | 1 |
7 files changed, 69 insertions, 47 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index ff15022369e4..b0adafc44747 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -15,7 +15,6 @@ */ #include <linux/acpi.h> -#include <linux/cleanup.h> #include <linux/module.h> #include <linux/moduleparam.h> #include <linux/ioport.h> @@ -42,8 +41,6 @@ #include <asm/irq.h> -#include "../serial_base.h" /* For serial_base_add_isa_preferred_console() */ - #include "8250.h" /* @@ -563,8 +560,6 @@ static void __init serial8250_isa_init_ports(void) port->irqflags |= irqflag; if (serial8250_isa_config != NULL) serial8250_isa_config(i, &up->port, &up->capabilities); - - serial_base_add_isa_preferred_console(serial8250_reg.dev_name, i); } } diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index ba9f4dc4e71d..fb809e32c6ae 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -55,6 +55,34 @@ #define DW_UART_QUIRK_SKIP_SET_RATE BIT(2) #define DW_UART_QUIRK_IS_DMA_FC BIT(3) #define DW_UART_QUIRK_APMC0D08 BIT(4) +#define DW_UART_QUIRK_CPR_VALUE BIT(5) + +struct dw8250_platform_data { + u8 usr_reg; + u32 cpr_value; + unsigned int quirks; +}; + +struct dw8250_data { + struct dw8250_port_data data; + const struct dw8250_platform_data *pdata; + + int msr_mask_on; + int msr_mask_off; + struct clk *clk; + struct clk *pclk; + struct notifier_block clk_notifier; + struct work_struct clk_work; + struct reset_control *rst; + + unsigned int skip_autocfg:1; + unsigned int uart_16550_compatible:1; +}; + +static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) +{ + return container_of(data, struct dw8250_data, data); +} static inline struct dw8250_data *clk_to_dw8250_data(struct notifier_block *nb) { @@ -432,6 +460,10 @@ static void dw8250_prepare_rx_dma(struct uart_8250_port *p) static void dw8250_quirks(struct uart_port *p, struct dw8250_data *data) { unsigned int quirks = data->pdata ? data->pdata->quirks : 0; + u32 cpr_value = data->pdata ? data->pdata->cpr_value : 0; + + if (quirks & DW_UART_QUIRK_CPR_VALUE) + data->data.cpr_value = cpr_value; #ifdef CONFIG_64BIT if (quirks & DW_UART_QUIRK_OCTEON) { @@ -714,8 +746,8 @@ static const struct dw8250_platform_data dw8250_armada_38x_data = { static const struct dw8250_platform_data dw8250_renesas_rzn1_data = { .usr_reg = DW_UART_USR, - .cpr_val = 0x00012f32, - .quirks = DW_UART_QUIRK_IS_DMA_FC, + .cpr_value = 0x00012f32, + .quirks = DW_UART_QUIRK_CPR_VALUE | DW_UART_QUIRK_IS_DMA_FC, }; static const struct dw8250_platform_data dw8250_starfive_jh7100_data = { diff --git a/drivers/tty/serial/8250/8250_dwlib.c b/drivers/tty/serial/8250/8250_dwlib.c index 3e33ddf7bc80..5a2520943dfd 100644 --- a/drivers/tty/serial/8250/8250_dwlib.c +++ b/drivers/tty/serial/8250/8250_dwlib.c @@ -242,7 +242,6 @@ static const struct serial_rs485 dw8250_rs485_supported = { void dw8250_setup_port(struct uart_port *p) { struct dw8250_port_data *pd = p->private_data; - struct dw8250_data *data = to_dw8250_data(pd); struct uart_8250_port *up = up_to_u8250p(p); u32 reg, old_dlf; @@ -278,7 +277,7 @@ void dw8250_setup_port(struct uart_port *p) reg = dw8250_readl_ext(p, DW_UART_CPR); if (!reg) { - reg = data->pdata->cpr_val; + reg = pd->cpr_value; dev_dbg(p->dev, "CPR is not available, using 0x%08x instead\n", reg); } if (!reg) diff --git a/drivers/tty/serial/8250/8250_dwlib.h b/drivers/tty/serial/8250/8250_dwlib.h index f13e91f2cace..7dd2a8e7b780 100644 --- a/drivers/tty/serial/8250/8250_dwlib.h +++ b/drivers/tty/serial/8250/8250_dwlib.h @@ -2,15 +2,10 @@ /* Synopsys DesignWare 8250 library header file. */ #include <linux/io.h> -#include <linux/notifier.h> #include <linux/types.h> -#include <linux/workqueue.h> #include "8250.h" -struct clk; -struct reset_control; - struct dw8250_port_data { /* Port properties */ int line; @@ -19,42 +14,16 @@ struct dw8250_port_data { struct uart_8250_dma dma; /* Hardware configuration */ + u32 cpr_value; u8 dlf_size; /* RS485 variables */ bool hw_rs485_support; }; -struct dw8250_platform_data { - u8 usr_reg; - u32 cpr_val; - unsigned int quirks; -}; - -struct dw8250_data { - struct dw8250_port_data data; - const struct dw8250_platform_data *pdata; - - int msr_mask_on; - int msr_mask_off; - struct clk *clk; - struct clk *pclk; - struct notifier_block clk_notifier; - struct work_struct clk_work; - struct reset_control *rst; - - unsigned int skip_autocfg:1; - unsigned int uart_16550_compatible:1; -}; - void dw8250_do_set_termios(struct uart_port *p, struct ktermios *termios, const struct ktermios *old); void dw8250_setup_port(struct uart_port *p); -static inline struct dw8250_data *to_dw8250_data(struct dw8250_port_data *data) -{ - return container_of(data, struct dw8250_data, data); -} - static inline u32 dw8250_readl_ext(struct uart_port *p, int offset) { if (p->iotype == UPIO_MEM32BE) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 170639d12b2a..ddac0a13cf84 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -115,6 +115,10 @@ /* RX FIFO occupancy indicator */ #define UART_OMAP_RX_LVL 0x19 +/* Timeout low and High */ +#define UART_OMAP_TO_L 0x26 +#define UART_OMAP_TO_H 0x27 + /* * Copy of the genpd flags for the console. * Only used if console suspend is disabled @@ -663,13 +667,24 @@ static irqreturn_t omap8250_irq(int irq, void *dev_id) /* * On K3 SoCs, it is observed that RX TIMEOUT is signalled after - * FIFO has been drained, in which case a dummy read of RX FIFO - * is required to clear RX TIMEOUT condition. + * FIFO has been drained or erroneously. + * So apply solution of Errata i2310 as mentioned in + * https://www.ti.com/lit/pdf/sprz536 */ if (priv->habit & UART_RX_TIMEOUT_QUIRK && - (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT && - serial_port_in(port, UART_OMAP_RX_LVL) == 0) { - serial_port_in(port, UART_RX); + (iir & UART_IIR_RX_TIMEOUT) == UART_IIR_RX_TIMEOUT) { + unsigned char efr2, timeout_h, timeout_l; + + efr2 = serial_in(up, UART_OMAP_EFR2); + timeout_h = serial_in(up, UART_OMAP_TO_H); + timeout_l = serial_in(up, UART_OMAP_TO_L); + serial_out(up, UART_OMAP_TO_H, 0xFF); + serial_out(up, UART_OMAP_TO_L, 0xFF); + serial_out(up, UART_OMAP_EFR2, UART_OMAP_EFR2_TIMEOUT_BEHAVE); + serial_in(up, UART_IIR); + serial_out(up, UART_OMAP_EFR2, efr2); + serial_out(up, UART_OMAP_TO_H, timeout_h); + serial_out(up, UART_OMAP_TO_L, timeout_l); } /* Stop processing interrupts on input overrun */ diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 40af74b55933..e1d7aa2fa347 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1985,6 +1985,17 @@ enum { MOXA_SUPP_RS485 = BIT(2), }; +static unsigned short moxa_get_nports(unsigned short device) +{ + switch (device) { + case PCI_DEVICE_ID_MOXA_CP116E_A_A: + case PCI_DEVICE_ID_MOXA_CP116E_A_B: + return 8; + } + + return FIELD_GET(0x00F0, device); +} + static bool pci_moxa_is_mini_pcie(unsigned short device) { if (device == PCI_DEVICE_ID_MOXA_CP102N || @@ -2038,7 +2049,7 @@ static int pci_moxa_init(struct pci_dev *dev) { unsigned short device = dev->device; resource_size_t iobar_addr = pci_resource_start(dev, 2); - unsigned int num_ports = (device & 0x00F0) >> 4, i; + unsigned int i, num_ports = moxa_get_nports(device); u8 val, init_mode = MOXA_RS232; if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232)) { diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c index f1a51b00b1b9..ba96fa913e7f 100644 --- a/drivers/tty/serial/8250/8250_pxa.c +++ b/drivers/tty/serial/8250/8250_pxa.c @@ -125,6 +125,7 @@ static int serial_pxa_probe(struct platform_device *pdev) uart.port.iotype = UPIO_MEM32; uart.port.regshift = 2; uart.port.fifosize = 64; + uart.tx_loadsz = 32; uart.dl_write = serial_pxa_dl_write; ret = serial8250_register_8250_port(&uart); |