1 files changed, 17 insertions, 54 deletions

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 92783fc8a851..7b428e7652c5 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -167,6 +167,7 @@ struct uart_amba_port {
 	bool			using_rx_dma;
 	struct pl011_dmarx_data dmarx;
 	struct pl011_dmatx_data	dmatx;
+	bool			dma_probed;
 #endif
 };
 
@@ -264,10 +265,11 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
 	}
 }
 
-static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap)
+static void pl011_dma_probe(struct uart_amba_port *uap)
 {
 	/* DMA is the sole user of the platform data right now */
 	struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev);
+	struct device *dev = uap->port.dev;
 	struct dma_slave_config tx_conf = {
 		.dst_addr = uap->port.mapbase + UART01x_DR,
 		.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -278,9 +280,15 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
 	struct dma_chan *chan;
 	dma_cap_mask_t mask;
 
-	chan = dma_request_slave_channel(dev, "tx");
+	uap->dma_probed = true;
+	chan = dma_request_slave_channel_reason(dev, "tx");
+	if (IS_ERR(chan)) {
+		if (PTR_ERR(chan) == -EPROBE_DEFER) {
+			dev_info(uap->port.dev, "DMA driver not ready\n");
+			uap->dma_probed = false;
+			return;
+		}
 
-	if (!chan) {
 		/* We need platform data */
 		if (!plat || !plat->dma_filter) {
 			dev_info(uap->port.dev, "no DMA platform data\n");
@@ -388,55 +396,8 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *
 	}
 }
 
-#ifndef MODULE
-/*
- * Stack up the UARTs and let the above initcall be done at device
- * initcall time, because the serial driver is called as an arch
- * initcall, and at this time the DMA subsystem is not yet registered.
- * At this point the driver will switch over to using DMA where desired.
- */
-struct dma_uap {
-	struct list_head node;
-	struct uart_amba_port *uap;
-	struct device *dev;
-};
-
-static LIST_HEAD(pl011_dma_uarts);
-
-static int __init pl011_dma_initcall(void)
-{
-	struct list_head *node, *tmp;
-
-	list_for_each_safe(node, tmp, &pl011_dma_uarts) {
-		struct dma_uap *dmau = list_entry(node, struct dma_uap, node);
-		pl011_dma_probe_initcall(dmau->dev, dmau->uap);
-		list_del(node);
-		kfree(dmau);
-	}
-	return 0;
-}
-
-device_initcall(pl011_dma_initcall);
-
-static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
-{
-	struct dma_uap *dmau = kzalloc(sizeof(struct dma_uap), GFP_KERNEL);
-	if (dmau) {
-		dmau->uap = uap;
-		dmau->dev = dev;
-		list_add_tail(&dmau->node, &pl011_dma_uarts);
-	}
-}
-#else
-static void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
-{
-	pl011_dma_probe_initcall(dev, uap);
-}
-#endif
-
 static void pl011_dma_remove(struct uart_amba_port *uap)
 {
-	/* TODO: remove the initcall if it has not yet executed */
 	if (uap->dmatx.chan)
 		dma_release_channel(uap->dmatx.chan);
 	if (uap->dmarx.chan)
@@ -1022,6 +983,9 @@ static void pl011_dma_startup(struct uart_amba_port *uap)
 {
 	int ret;
 
+	if (!uap->dma_probed)
+		pl011_dma_probe(uap);
+
 	if (!uap->dmatx.chan)
 		return;
 
@@ -1143,7 +1107,7 @@ static inline bool pl011_dma_rx_running(struct uart_amba_port *uap)
 
 #else
 /* Blank functions if the DMA engine is not available */
-static inline void pl011_dma_probe(struct device *dev, struct uart_amba_port *uap)
+static inline void pl011_dma_probe(struct uart_amba_port *uap)
 {
 }
 
@@ -2280,7 +2244,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->port.flags = UPF_BOOT_AUTOCONF;
 	uap->port.line = i;
 	INIT_DELAYED_WORK(&uap->tx_softirq_work, pl011_tx_softirq);
-	pl011_dma_probe(&dev->dev, uap);
 
 	/* Ensure interrupts from this UART are masked and cleared */
 	writew(0, uap->port.membase + UART011_IMSC);
@@ -2295,7 +2258,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	if (!amba_reg.state) {
 		ret = uart_register_driver(&amba_reg);
 		if (ret < 0) {
-			pr_err("Failed to register AMBA-PL011 driver\n");
+			dev_err(&dev->dev,
+				"Failed to register AMBA-PL011 driver\n");
 			return ret;
 		}
 	}
@@ -2304,7 +2268,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	if (ret) {
 		amba_ports[i] = NULL;
 		uart_unregister_driver(&amba_reg);
-		pl011_dma_remove(uap);
 	}
 
 	return ret;