diff options
Diffstat (limited to 'drivers/tty/serial/amba-pl011.c')
| -rw-r--r-- | drivers/tty/serial/amba-pl011.c | 73 |
1 files changed, 5 insertions, 68 deletions
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 52518a606c06..1f1df46242f9 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -188,38 +188,6 @@ static struct vendor_data vendor_st = { .get_fifosize = get_fifosize_st, }; -static const u16 pl011_zte_offsets[REG_ARRAY_SIZE] = { - [REG_DR] = ZX_UART011_DR, - [REG_FR] = ZX_UART011_FR, - [REG_LCRH_RX] = ZX_UART011_LCRH, - [REG_LCRH_TX] = ZX_UART011_LCRH, - [REG_IBRD] = ZX_UART011_IBRD, - [REG_FBRD] = ZX_UART011_FBRD, - [REG_CR] = ZX_UART011_CR, - [REG_IFLS] = ZX_UART011_IFLS, - [REG_IMSC] = ZX_UART011_IMSC, - [REG_RIS] = ZX_UART011_RIS, - [REG_MIS] = ZX_UART011_MIS, - [REG_ICR] = ZX_UART011_ICR, - [REG_DMACR] = ZX_UART011_DMACR, -}; - -static unsigned int get_fifosize_zte(struct amba_device *dev) -{ - return 16; -} - -static struct vendor_data vendor_zte = { - .reg_offset = pl011_zte_offsets, - .access_32b = true, - .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, - .fr_busy = ZX_UART01x_FR_BUSY, - .fr_dsr = ZX_UART01x_FR_DSR, - .fr_cts = ZX_UART01x_FR_CTS, - .fr_ri = ZX_UART011_FR_RI, - .get_fifosize = get_fifosize_zte, -}; - /* Deals with DMA transactions */ struct pl011_sgbuf { @@ -262,7 +230,6 @@ struct uart_amba_port { unsigned int im; /* interrupt mask */ unsigned int old_status; unsigned int fifosize; /* vendor-specific */ - unsigned int old_cr; /* state during shutdown */ unsigned int fixed_baud; /* vendor-set fixed baud rate */ char type[12]; bool rs485_tx_started; @@ -1837,8 +1804,8 @@ static int pl011_startup(struct uart_port *port) spin_lock_irq(&uap->port.lock); - /* restore RTS and DTR */ - cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); + cr = pl011_read(uap, REG_CR); + cr &= UART011_CR_RTS | UART011_CR_DTR; cr |= UART01x_CR_UARTEN | UART011_CR_RXE; if (port->rs485.flags & SER_RS485_ENABLED) { @@ -1915,7 +1882,6 @@ static void pl011_disable_uart(struct uart_amba_port *uap) uap->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS); spin_lock_irq(&uap->port.lock); cr = pl011_read(uap, REG_CR); - uap->old_cr = cr; cr &= UART011_CR_RTS | UART011_CR_DTR; cr |= UART01x_CR_UARTEN | UART011_CR_TXE; pl011_write(cr, uap, REG_CR); @@ -2105,9 +2071,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, if (port->rs485.flags & SER_RS485_ENABLED) termios->c_cflag &= ~CRTSCTS; - /* first, disable everything */ old_cr = pl011_read(uap, REG_CR); - pl011_write(0, uap, REG_CR); if (termios->c_cflag & CRTSCTS) { if (old_cr & UART011_CR_RTS) @@ -2184,31 +2148,12 @@ static const char *pl011_type(struct uart_port *port) } /* - * Release the memory region(s) being used by 'port' - */ -static void pl011_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, SZ_4K); -} - -/* - * Request the memory region(s) being used by 'port' - */ -static int pl011_request_port(struct uart_port *port) -{ - return request_mem_region(port->mapbase, SZ_4K, "uart-pl011") - != NULL ? 0 : -EBUSY; -} - -/* * Configure/autoconfigure the port. */ static void pl011_config_port(struct uart_port *port, int flags) { - if (flags & UART_CONFIG_TYPE) { + if (flags & UART_CONFIG_TYPE) port->type = PORT_AMBA; - pl011_request_port(port); - } } /* @@ -2223,6 +2168,8 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) ret = -EINVAL; if (ser->baud_base < 9600) ret = -EINVAL; + if (port->mapbase != (unsigned long) ser->iomem_base) + ret = -EINVAL; return ret; } @@ -2275,8 +2222,6 @@ static const struct uart_ops amba_pl011_pops = { .flush_buffer = pl011_dma_flush_buffer, .set_termios = pl011_set_termios, .type = pl011_type, - .release_port = pl011_release_port, - .request_port = pl011_request_port, .config_port = pl011_config_port, .verify_port = pl011_verify_port, #ifdef CONFIG_CONSOLE_POLL @@ -2306,8 +2251,6 @@ static const struct uart_ops sbsa_uart_pops = { .shutdown = sbsa_uart_shutdown, .set_termios = sbsa_uart_set_termios, .type = pl011_type, - .release_port = pl011_release_port, - .request_port = pl011_request_port, .config_port = pl011_config_port, .verify_port = pl011_verify_port, #ifdef CONFIG_CONSOLE_POLL @@ -2754,7 +2697,6 @@ static int pl011_setup_port(struct device *dev, struct uart_amba_port *uap, index = pl011_probe_dt_alias(index, dev); - uap->old_cr = 0; uap->port.dev = dev; uap->port.mapbase = mmiobase->start; uap->port.membase = base; @@ -2975,11 +2917,6 @@ static const struct amba_id pl011_ids[] = { .mask = 0x00ffffff, .data = &vendor_st, }, - { - .id = AMBA_LINUX_ID(0x00, 0x1, 0xffe), - .mask = 0x00ffffff, - .data = &vendor_zte, - }, { 0, 0 }, }; |