diff options
Diffstat (limited to 'drivers/tty/serial/ar933x_uart.c')
| -rw-r--r-- | drivers/tty/serial/ar933x_uart.c | 38 |
1 files changed, 15 insertions, 23 deletions
diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c index 8d09ace062e5..8bb33556b312 100644 --- a/drivers/tty/serial/ar933x_uart.c +++ b/drivers/tty/serial/ar933x_uart.c @@ -378,7 +378,7 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) up->port.icount.rx++; ch = rdata & AR933X_UART_DATA_TX_RX_MASK; - if (uart_handle_sysrq_char(&up->port, ch)) + if (uart_prepare_sysrq_char(&up->port, ch)) continue; if ((up->port.ignore_status_mask & AR933X_DUMMY_STATUS_RD) == 0) @@ -390,7 +390,7 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up) static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) { - struct circ_buf *xmit = &up->port.state->xmit; + struct tty_port *tport = &up->port.state->port; struct serial_rs485 *rs485conf = &up->port.rs485; int count; bool half_duplex_send = false; @@ -399,7 +399,7 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) return; if ((rs485conf->flags & SER_RS485_ENABLED) && - (up->port.x_char || !uart_circ_empty(xmit))) { + (up->port.x_char || !kfifo_is_empty(&tport->xmit_fifo))) { ar933x_uart_stop_rx_interrupt(up); gpiod_set_value(up->rts_gpiod, !!(rs485conf->flags & SER_RS485_RTS_ON_SEND)); half_duplex_send = true; @@ -408,6 +408,7 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) count = up->port.fifosize; do { unsigned int rdata; + unsigned char c; rdata = ar933x_uart_read(up, AR933X_UART_DATA_REG); if ((rdata & AR933X_UART_DATA_TX_CSR) == 0) @@ -420,18 +421,16 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up) continue; } - if (uart_circ_empty(xmit)) + if (!uart_fifo_get(&up->port, &c)) break; - ar933x_uart_putc(up, xmit->buf[xmit->tail]); - - uart_xmit_advance(&up->port, 1); + ar933x_uart_putc(up, c); } while (--count > 0); - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS) uart_write_wakeup(&up->port); - if (!uart_circ_empty(xmit)) { + if (!kfifo_is_empty(&tport->xmit_fifo)) { ar933x_uart_start_tx_interrupt(up); } else if (half_duplex_send) { ar933x_uart_wait_tx_complete(up); @@ -468,7 +467,7 @@ static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id) ar933x_uart_tx_chars(up); } - uart_port_unlock(&up->port); + uart_unlock_and_check_sysrq(&up->port); return IRQ_HANDLED; } @@ -627,14 +626,10 @@ static void ar933x_uart_console_write(struct console *co, const char *s, unsigned int int_en; int locked = 1; - local_irq_save(flags); - - if (up->port.sysrq) - locked = 0; - else if (oops_in_progress) - locked = uart_port_trylock(&up->port); + if (oops_in_progress) + locked = uart_port_trylock_irqsave(&up->port, &flags); else - uart_port_lock(&up->port); + uart_port_lock_irqsave(&up->port, &flags); /* * First save the IER then disable the interrupts @@ -654,9 +649,7 @@ static void ar933x_uart_console_write(struct console *co, const char *s, ar933x_uart_write(up, AR933X_UART_INT_REG, AR933X_UART_INT_ALLINTS); if (locked) - uart_port_unlock(&up->port); - - local_irq_restore(flags); + uart_port_unlock_irqrestore(&up->port, flags); } static int ar933x_uart_console_setup(struct console *co, char *options) @@ -699,7 +692,6 @@ static struct uart_driver ar933x_uart_driver = { .cons = NULL, /* filled in runtime */ }; -static const struct serial_rs485 ar933x_no_rs485 = {}; static const struct serial_rs485 ar933x_rs485_supported = { .flags = SER_RS485_ENABLED | SER_RS485_RTS_ON_SEND | SER_RS485_RTS_AFTER_SEND, }; @@ -795,7 +787,7 @@ static int ar933x_uart_probe(struct platform_device *pdev) up->rts_gpiod = mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS); if (!up->rts_gpiod) { - port->rs485_supported = ar933x_no_rs485; + port->rs485_supported.flags &= ~SER_RS485_ENABLED; if (port->rs485.flags & SER_RS485_ENABLED) { dev_err(&pdev->dev, "lacking rts-gpio, disabling RS485\n"); port->rs485.flags &= ~SER_RS485_ENABLED; @@ -840,7 +832,7 @@ MODULE_DEVICE_TABLE(of, ar933x_uart_of_ids); static struct platform_driver ar933x_uart_platform_driver = { .probe = ar933x_uart_probe, - .remove_new = ar933x_uart_remove, + .remove = ar933x_uart_remove, .driver = { .name = DRIVER_NAME, .of_match_table = of_match_ptr(ar933x_uart_of_ids), |