summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250_core.c23
-rw-r--r--drivers/tty/serial/8250/8250_exar.c4
-rw-r--r--drivers/tty/serial/amba-pl011.c37
-rw-r--r--drivers/tty/serial/fsl_lpuart.c24
-rw-r--r--drivers/tty/serial/imx.c27
-rw-r--r--drivers/tty/serial/sh-sci.c12
-rw-r--r--drivers/tty/serial/st-asc.c1
7 files changed, 71 insertions, 57 deletions
diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c
index b5def356af63..1aab3010fbfa 100644
--- a/drivers/tty/serial/8250/8250_core.c
+++ b/drivers/tty/serial/8250/8250_core.c
@@ -1043,13 +1043,24 @@ int serial8250_register_8250_port(struct uart_8250_port *up)
if (up->dl_write)
uart->dl_write = up->dl_write;
- if (serial8250_isa_config != NULL)
- serial8250_isa_config(0, &uart->port,
- &uart->capabilities);
+ if (uart->port.type != PORT_8250_CIR) {
+ if (serial8250_isa_config != NULL)
+ serial8250_isa_config(0, &uart->port,
+ &uart->capabilities);
+
+ ret = uart_add_one_port(&serial8250_reg,
+ &uart->port);
+ if (ret == 0)
+ ret = uart->port.line;
+ } else {
+ dev_info(uart->port.dev,
+ "skipping CIR port at 0x%lx / 0x%llx, IRQ %d\n",
+ uart->port.iobase,
+ (unsigned long long)uart->port.mapbase,
+ uart->port.irq);
- ret = uart_add_one_port(&serial8250_reg, &uart->port);
- if (ret == 0)
- ret = uart->port.line;
+ ret = 0;
+ }
}
mutex_unlock(&serial_mutex);
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index b5c98e5bf524..c6360fbdf808 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -261,7 +261,7 @@ __xr17v35x_register_gpio(struct pci_dev *pcidev,
}
static const struct property_entry exar_gpio_properties[] = {
- PROPERTY_ENTRY_U32("linux,first-pin", 0),
+ PROPERTY_ENTRY_U32("exar,first-pin", 0),
PROPERTY_ENTRY_U32("ngpios", 16),
{ }
};
@@ -326,7 +326,7 @@ static int iot2040_rs485_config(struct uart_port *port,
}
static const struct property_entry iot2040_gpio_properties[] = {
- PROPERTY_ENTRY_U32("linux,first-pin", 10),
+ PROPERTY_ENTRY_U32("exar,first-pin", 10),
PROPERTY_ENTRY_U32("ngpios", 1),
{ }
};
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 8a857bb34fbb..1888d168a41c 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -142,15 +142,7 @@ static struct vendor_data vendor_sbsa = {
.fixed_options = true,
};
-/*
- * Erratum 44 for QDF2432v1 and QDF2400v1 SoCs describes the BUSY bit as
- * occasionally getting stuck as 1. To avoid the potential for a hang, check
- * TXFE == 0 instead of BUSY == 1. This may not be suitable for all UART
- * implementations, so only do so if an affected platform is detected in
- * parse_spcr().
- */
-static bool qdf2400_e44_present = false;
-
+#ifdef CONFIG_ACPI_SPCR_TABLE
static struct vendor_data vendor_qdt_qdf2400_e44 = {
.reg_offset = pl011_std_offsets,
.fr_busy = UART011_FR_TXFE,
@@ -165,6 +157,7 @@ static struct vendor_data vendor_qdt_qdf2400_e44 = {
.always_enabled = true,
.fixed_options = true,
};
+#endif
static u16 pl011_st_offsets[REG_ARRAY_SIZE] = {
[REG_DR] = UART01x_DR,
@@ -2375,12 +2368,14 @@ static int __init pl011_console_match(struct console *co, char *name, int idx,
resource_size_t addr;
int i;
- if (strcmp(name, "qdf2400_e44") == 0) {
- pr_info_once("UART: Working around QDF2400 SoC erratum 44");
- qdf2400_e44_present = true;
- } else if (strcmp(name, "pl011") != 0) {
+ /*
+ * Systems affected by the Qualcomm Technologies QDF2400 E44 erratum
+ * have a distinct console name, so make sure we check for that.
+ * The actual implementation of the erratum occurs in the probe
+ * function.
+ */
+ if ((strcmp(name, "qdf2400_e44") != 0) && (strcmp(name, "pl011") != 0))
return -ENODEV;
- }
if (uart_parse_earlycon(options, &iotype, &addr, &options))
return -ENODEV;
@@ -2734,11 +2729,17 @@ static int sbsa_uart_probe(struct platform_device *pdev)
}
uap->port.irq = ret;
- uap->reg_offset = vendor_sbsa.reg_offset;
- uap->vendor = qdf2400_e44_present ?
- &vendor_qdt_qdf2400_e44 : &vendor_sbsa;
+#ifdef CONFIG_ACPI_SPCR_TABLE
+ if (qdf2400_e44_present) {
+ dev_info(&pdev->dev, "working around QDF2400 SoC erratum 44\n");
+ uap->vendor = &vendor_qdt_qdf2400_e44;
+ } else
+#endif
+ uap->vendor = &vendor_sbsa;
+
+ uap->reg_offset = uap->vendor->reg_offset;
uap->fifosize = 32;
- uap->port.iotype = vendor_sbsa.access_32b ? UPIO_MEM32 : UPIO_MEM;
+ uap->port.iotype = uap->vendor->access_32b ? UPIO_MEM32 : UPIO_MEM;
uap->port.ops = &sbsa_uart_pops;
uap->fixed_baud = baudrate;
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 343de8c384b0..898dcb091a27 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -619,6 +619,12 @@ static unsigned int lpuart32_tx_empty(struct uart_port *port)
TIOCSER_TEMT : 0;
}
+static bool lpuart_is_32(struct lpuart_port *sport)
+{
+ return sport->port.iotype == UPIO_MEM32 ||
+ sport->port.iotype == UPIO_MEM32BE;
+}
+
static irqreturn_t lpuart_txint(int irq, void *dev_id)
{
struct lpuart_port *sport = dev_id;
@@ -627,7 +633,7 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
spin_lock_irqsave(&sport->port.lock, flags);
if (sport->port.x_char) {
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_write(&sport->port, sport->port.x_char, UARTDATA);
else
writeb(sport->port.x_char, sport->port.membase + UARTDR);
@@ -635,14 +641,14 @@ static irqreturn_t lpuart_txint(int irq, void *dev_id)
}
if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_stop_tx(&sport->port);
else
lpuart_stop_tx(&sport->port);
goto out;
}
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_transmit_buffer(sport);
else
lpuart_transmit_buffer(sport);
@@ -1978,12 +1984,12 @@ static int __init lpuart_console_setup(struct console *co, char *options)
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_console_get_options(sport, &baud, &parity, &bits);
else
lpuart_console_get_options(sport, &baud, &parity, &bits);
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart32_setup_watermark(sport);
else
lpuart_setup_watermark(sport);
@@ -2118,7 +2124,7 @@ static int lpuart_probe(struct platform_device *pdev)
}
sport->port.irq = ret;
sport->port.iotype = sdata->iotype;
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
sport->port.ops = &lpuart32_pops;
else
sport->port.ops = &lpuart_pops;
@@ -2145,7 +2151,7 @@ static int lpuart_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, &sport->port);
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE))
+ if (lpuart_is_32(sport))
lpuart_reg.cons = LPUART32_CONSOLE;
else
lpuart_reg.cons = LPUART_CONSOLE;
@@ -2198,7 +2204,7 @@ static int lpuart_suspend(struct device *dev)
struct lpuart_port *sport = dev_get_drvdata(dev);
unsigned long temp;
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
+ if (lpuart_is_32(sport)) {
/* disable Rx/Tx and interrupts */
temp = lpuart32_read(&sport->port, UARTCTRL);
temp &= ~(UARTCTRL_TE | UARTCTRL_TIE | UARTCTRL_TCIE);
@@ -2249,7 +2255,7 @@ static int lpuart_resume(struct device *dev)
if (sport->port.suspended && !sport->port.irq_wake)
clk_prepare_enable(sport->clk);
- if (sport->port.iotype & (UPIO_MEM32 | UPIO_MEM32BE)) {
+ if (lpuart_is_32(sport)) {
lpuart32_setup_watermark(sport);
temp = lpuart32_read(&sport->port, UARTCTRL);
temp |= (UARTCTRL_RIE | UARTCTRL_TIE | UARTCTRL_RE |
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index 9e3162bf3bd1..80934e7bd67f 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -186,11 +186,6 @@
#define UART_NR 8
-/* RX DMA buffer periods */
-#define RX_DMA_PERIODS 4
-#define RX_BUF_SIZE (PAGE_SIZE)
-
-
/* i.MX21 type uart runs on all i.mx except i.MX1 and i.MX6q */
enum imx_uart_type {
IMX1_UART,
@@ -226,7 +221,6 @@ struct imx_port {
struct dma_chan *dma_chan_rx, *dma_chan_tx;
struct scatterlist rx_sgl, tx_sgl[2];
void *rx_buf;
- unsigned int rx_buf_size;
struct circ_buf rx_ring;
unsigned int rx_periods;
dma_cookie_t rx_cookie;
@@ -464,7 +458,7 @@ static inline void imx_transmit_buffer(struct imx_port *sport)
}
}
- while (!uart_circ_empty(xmit) &&
+ while (!uart_circ_empty(xmit) && !sport->dma_is_txing &&
!(readl(sport->port.membase + uts_reg(sport)) & UTS_TXFULL)) {
/* send xmit->buf[xmit->tail]
* out the port here */
@@ -967,6 +961,8 @@ static void imx_timeout(unsigned long data)
}
}
+#define RX_BUF_SIZE (PAGE_SIZE)
+
/*
* There are two kinds of RX DMA interrupts(such as in the MX6Q):
* [1] the RX DMA buffer is full.
@@ -1049,6 +1045,9 @@ static void dma_rx_callback(void *data)
}
}
+/* RX DMA buffer periods */
+#define RX_DMA_PERIODS 4
+
static int start_rx_dma(struct imx_port *sport)
{
struct scatterlist *sgl = &sport->rx_sgl;
@@ -1059,8 +1058,9 @@ static int start_rx_dma(struct imx_port *sport)
sport->rx_ring.head = 0;
sport->rx_ring.tail = 0;
+ sport->rx_periods = RX_DMA_PERIODS;
- sg_init_one(sgl, sport->rx_buf, sport->rx_buf_size);
+ sg_init_one(sgl, sport->rx_buf, RX_BUF_SIZE);
ret = dma_map_sg(dev, sgl, 1, DMA_FROM_DEVICE);
if (ret == 0) {
dev_err(dev, "DMA mapping error for RX.\n");
@@ -1171,7 +1171,7 @@ static int imx_uart_dma_init(struct imx_port *sport)
goto err;
}
- sport->rx_buf = kzalloc(sport->rx_buf_size, GFP_KERNEL);
+ sport->rx_buf = kzalloc(PAGE_SIZE, GFP_KERNEL);
if (!sport->rx_buf) {
ret = -ENOMEM;
goto err;
@@ -2036,7 +2036,6 @@ static int serial_imx_probe_dt(struct imx_port *sport,
{
struct device_node *np = pdev->dev.of_node;
int ret;
- u32 dma_buf_size[2];
sport->devdata = of_device_get_match_data(&pdev->dev);
if (!sport->devdata)
@@ -2060,14 +2059,6 @@ static int serial_imx_probe_dt(struct imx_port *sport,
if (of_get_property(np, "rts-gpios", NULL))
sport->have_rtsgpio = 1;
- if (!of_property_read_u32_array(np, "fsl,dma-size", dma_buf_size, 2)) {
- sport->rx_buf_size = dma_buf_size[0] * dma_buf_size[1];
- sport->rx_periods = dma_buf_size[1];
- } else {
- sport->rx_buf_size = RX_BUF_SIZE;
- sport->rx_periods = RX_DMA_PERIODS;
- }
-
return 0;
}
#else
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index da5ddfc14778..e08b16b070c0 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -1085,10 +1085,12 @@ static ssize_t rx_trigger_store(struct device *dev,
{
struct uart_port *port = dev_get_drvdata(dev);
struct sci_port *sci = to_sci_port(port);
+ int ret;
long r;
- if (kstrtol(buf, 0, &r) == -EINVAL)
- return -EINVAL;
+ ret = kstrtol(buf, 0, &r);
+ if (ret)
+ return ret;
sci->rx_trigger = scif_set_rtrg(port, r);
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
@@ -1116,10 +1118,12 @@ static ssize_t rx_fifo_timeout_store(struct device *dev,
{
struct uart_port *port = dev_get_drvdata(dev);
struct sci_port *sci = to_sci_port(port);
+ int ret;
long r;
- if (kstrtol(buf, 0, &r) == -EINVAL)
- return -EINVAL;
+ ret = kstrtol(buf, 0, &r);
+ if (ret)
+ return ret;
sci->rx_fifo_timeout = r;
scif_set_rtrg(port, 1);
if (r > 0)
diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c
index f5335be344f6..6b0ca65027d0 100644
--- a/drivers/tty/serial/st-asc.c
+++ b/drivers/tty/serial/st-asc.c
@@ -758,6 +758,7 @@ static int asc_init_port(struct asc_port *ascport,
if (IS_ERR(ascport->pinctrl)) {
ret = PTR_ERR(ascport->pinctrl);
dev_err(&pdev->dev, "Failed to get Pinctrl: %d\n", ret);
+ return ret;
}
ascport->states[DEFAULT] =
generated by cgit (git 2.34.1) at 2024-06-27 16:31:16 +0000