diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 9 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/tty/serial/amba-pl011.c | 25 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 8 | ||||
| -rw-r--r-- | drivers/tty/serial/mxs-auart.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/st-asc.c | 11 |
6 files changed, 50 insertions, 13 deletions
diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 6ee55a2d47bb..e65808c482f1 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -257,7 +257,7 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, { unsigned int baud = tty_termios_baud_rate(termios); struct dw8250_data *d = p->private_data; - unsigned int rate; + long rate; int ret; if (IS_ERR(d->clk) || !old) @@ -265,7 +265,12 @@ static void dw8250_set_termios(struct uart_port *p, struct ktermios *termios, clk_disable_unprepare(d->clk); rate = clk_round_rate(d->clk, baud * 16); - ret = clk_set_rate(d->clk, rate); + if (rate < 0) + ret = rate; + else if (rate == 0) + ret = -ENOENT; + else + ret = clk_set_rate(d->clk, rate); clk_prepare_enable(d->clk); if (!ret) diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index a65fb8197aec..0e3f529d50e9 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -128,9 +128,13 @@ config SERIAL_8250_PCI by the parport_serial driver, enabled with CONFIG_PARPORT_SERIAL. config SERIAL_8250_EXAR - tristate "8250/16550 PCI device support" - depends on SERIAL_8250_PCI + tristate "8250/16550 Exar/Commtech PCI/PCIe device support" + depends on SERIAL_8250_PCI default SERIAL_8250 + help + This builds support for XR17C1xx, XR17V3xx and some Commtech + 422x PCIe serial cards that are not covered by the more generic + SERIAL_8250_PCI option. config SERIAL_8250_HP300 tristate diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8789ea423ccf..b0a377725d63 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2373,7 +2373,7 @@ static int __init pl011_console_match(struct console *co, char *name, int idx, if (strcmp(name, "qdf2400_e44") == 0) { pr_info_once("UART: Working around QDF2400 SoC erratum 44"); qdf2400_e44_present = true; - } else if (strcmp(name, "pl011") != 0 || strcmp(name, "ttyAMA") != 0) { + } else if (strcmp(name, "pl011") != 0) { return -ENODEV; } @@ -2452,18 +2452,37 @@ static void pl011_early_write(struct console *con, const char *s, unsigned n) uart_console_write(&dev->port, s, n, pl011_putc); } +/* + * On non-ACPI systems, earlycon is enabled by specifying + * "earlycon=pl011,<address>" on the kernel command line. + * + * On ACPI ARM64 systems, an "early" console is enabled via the SPCR table, + * by specifying only "earlycon" on the command line. Because it requires + * SPCR, the console starts after ACPI is parsed, which is later than a + * traditional early console. + * + * To get the traditional early console that starts before ACPI is parsed, + * specify the full "earlycon=pl011,<address>" option. + */ static int __init pl011_early_console_setup(struct earlycon_device *device, const char *opt) { if (!device->port.membase) return -ENODEV; - device->con->write = qdf2400_e44_present ? - qdf2400_e44_early_write : pl011_early_write; + /* On QDF2400 SOCs affected by Erratum 44, the "qdf2400_e44" must + * also be specified, e.g. "earlycon=pl011,<address>,qdf2400_e44". + */ + if (!strcmp(device->options, "qdf2400_e44")) + device->con->write = qdf2400_e44_early_write; + else + device->con->write = pl011_early_write; + return 0; } OF_EARLYCON_DECLARE(pl011, "arm,pl011", pl011_early_console_setup); OF_EARLYCON_DECLARE(pl011, "arm,sbsa-uart", pl011_early_console_setup); +EARLYCON_DECLARE(qdf2400_e44, pl011_early_console_setup); #else #define AMBA_CONSOLE NULL diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index dcebb28ffbc4..1f50a83ef958 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1951,6 +1951,11 @@ static void atmel_flush_buffer(struct uart_port *port) atmel_uart_writel(port, ATMEL_PDC_TCR, 0); atmel_port->pdc_tx.ofs = 0; } + /* + * in uart_flush_buffer(), the xmit circular buffer has just + * been cleared, so we have to reset tx_len accordingly. + */ + atmel_port->tx_len = 0; } /* @@ -2483,6 +2488,9 @@ static void atmel_console_write(struct console *co, const char *s, u_int count) pdc_tx = atmel_uart_readl(port, ATMEL_PDC_PTSR) & ATMEL_PDC_TXTEN; atmel_uart_writel(port, ATMEL_PDC_PTCR, ATMEL_PDC_TXTDIS); + /* Make sure that tx path is actually able to send characters */ + atmel_uart_writel(port, ATMEL_US_CR, ATMEL_US_TXEN); + uart_console_write(port, s, count, atmel_console_putchar); /* diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 6989b227d134..be94246b6fcc 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -1088,7 +1088,7 @@ static void mxs_auart_settermios(struct uart_port *u, AUART_LINECTRL_BAUD_DIV_MAX); baud_max = u->uartclk * 32 / AUART_LINECTRL_BAUD_DIV_MIN; baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max); - div = u->uartclk * 32 / baud; + div = DIV_ROUND_CLOSEST(u->uartclk * 32, baud); } ctrl |= AUART_LINECTRL_BAUD_DIVFRAC(div & 0x3F); diff --git a/drivers/tty/serial/st-asc.c b/drivers/tty/serial/st-asc.c index bcf1d33e6ffe..c334bcc59c64 100644 --- a/drivers/tty/serial/st-asc.c +++ b/drivers/tty/serial/st-asc.c @@ -575,12 +575,13 @@ static void asc_set_termios(struct uart_port *port, struct ktermios *termios, pinctrl_select_state(ascport->pinctrl, ascport->states[NO_HW_FLOWCTRL]); - gpiod = devm_get_gpiod_from_child(port->dev, "rts", - &np->fwnode); - if (!IS_ERR(gpiod)) { - gpiod_direction_output(gpiod, 0); + gpiod = devm_fwnode_get_gpiod_from_child(port->dev, + "rts", + &np->fwnode, + GPIOD_OUT_LOW, + np->name); + if (!IS_ERR(gpiod)) ascport->rts = gpiod; - } } } |