summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/hvc/hvc_xen.c31
-rw-r--r--drivers/tty/n_hdlc.c23
-rw-r--r--drivers/tty/serial/8250/8250_bcm7271.c13
-rw-r--r--drivers/tty/serial/8250/8250_fintek.c20
-rw-r--r--drivers/tty/serial/8250/8250_pci.c39
-rw-r--r--drivers/tty/serial/8250/8250_port.c7
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/tty/serial/amba-pl011.c1
-rw-r--r--drivers/tty/serial/fsl_lpuart.c1
-rw-r--r--drivers/tty/serial/liteuart.c20
-rw-r--r--drivers/tty/serial/msm_serial.c3
-rw-r--r--drivers/tty/serial/serial-tegra.c4
-rw-r--r--drivers/tty/serial/serial_core.c18
13 files changed, 130 insertions, 52 deletions
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c
index f0bf01ea069a..ebaf7500f48f 100644
--- a/drivers/tty/hvc/hvc_xen.c
+++ b/drivers/tty/hvc/hvc_xen.c
@@ -37,6 +37,8 @@ struct xencons_info {
struct xenbus_device *xbdev;
struct xencons_interface *intf;
unsigned int evtchn;
+ XENCONS_RING_IDX out_cons;
+ unsigned int out_cons_same;
struct hvc_struct *hvc;
int irq;
int vtermno;
@@ -138,6 +140,8 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
XENCONS_RING_IDX cons, prod;
int recv = 0;
struct xencons_info *xencons = vtermno_to_xencons(vtermno);
+ unsigned int eoiflag = 0;
+
if (xencons == NULL)
return -EINVAL;
intf = xencons->intf;
@@ -157,7 +161,27 @@ static int domU_read_console(uint32_t vtermno, char *buf, int len)
mb(); /* read ring before consuming */
intf->in_cons = cons;
- notify_daemon(xencons);
+ /*
+ * When to mark interrupt having been spurious:
+ * - there was no new data to be read, and
+ * - the backend did not consume some output bytes, and
+ * - the previous round with no read data didn't see consumed bytes
+ * (we might have a race with an interrupt being in flight while
+ * updating xencons->out_cons, so account for that by allowing one
+ * round without any visible reason)
+ */
+ if (intf->out_cons != xencons->out_cons) {
+ xencons->out_cons = intf->out_cons;
+ xencons->out_cons_same = 0;
+ }
+ if (recv) {
+ notify_daemon(xencons);
+ } else if (xencons->out_cons_same++ > 1) {
+ eoiflag = XEN_EOI_FLAG_SPURIOUS;
+ }
+
+ xen_irq_lateeoi(xencons->irq, eoiflag);
+
return recv;
}
@@ -386,7 +410,7 @@ static int xencons_connect_backend(struct xenbus_device *dev,
if (ret)
return ret;
info->evtchn = evtchn;
- irq = bind_evtchn_to_irq(evtchn);
+ irq = bind_interdomain_evtchn_to_irq_lateeoi(dev, evtchn);
if (irq < 0)
return irq;
info->irq = irq;
@@ -522,6 +546,7 @@ static struct xenbus_driver xencons_driver = {
.remove = xencons_remove,
.resume = xencons_resume,
.otherend_changed = xencons_backend_changed,
+ .not_essential = true,
};
#endif /* CONFIG_HVC_XEN_FRONTEND */
@@ -550,7 +575,7 @@ static int __init xen_hvc_init(void)
return r;
info = vtermno_to_xencons(HVC_COOKIE);
- info->irq = bind_evtchn_to_irq(info->evtchn);
+ info->irq = bind_evtchn_to_irq_lateeoi(info->evtchn);
}
if (info->irq < 0)
info->irq = 0; /* NO_IRQ */
diff --git a/drivers/tty/n_hdlc.c b/drivers/tty/n_hdlc.c
index 7e0884ecc74f..23ba1fc99df8 100644
--- a/drivers/tty/n_hdlc.c
+++ b/drivers/tty/n_hdlc.c
@@ -140,6 +140,8 @@ struct n_hdlc {
struct n_hdlc_buf_list rx_buf_list;
struct n_hdlc_buf_list tx_free_buf_list;
struct n_hdlc_buf_list rx_free_buf_list;
+ struct work_struct write_work;
+ struct tty_struct *tty_for_write_work;
};
/*
@@ -154,6 +156,7 @@ static struct n_hdlc_buf *n_hdlc_buf_get(struct n_hdlc_buf_list *list);
/* Local functions */
static struct n_hdlc *n_hdlc_alloc(void);
+static void n_hdlc_tty_write_work(struct work_struct *work);
/* max frame size for memory allocations */
static int maxframe = 4096;
@@ -210,6 +213,8 @@ static void n_hdlc_tty_close(struct tty_struct *tty)
wake_up_interruptible(&tty->read_wait);
wake_up_interruptible(&tty->write_wait);
+ cancel_work_sync(&n_hdlc->write_work);
+
n_hdlc_free_buf_list(&n_hdlc->rx_free_buf_list);
n_hdlc_free_buf_list(&n_hdlc->tx_free_buf_list);
n_hdlc_free_buf_list(&n_hdlc->rx_buf_list);
@@ -241,6 +246,8 @@ static int n_hdlc_tty_open(struct tty_struct *tty)
return -ENFILE;
}
+ INIT_WORK(&n_hdlc->write_work, n_hdlc_tty_write_work);
+ n_hdlc->tty_for_write_work = tty;
tty->disc_data = n_hdlc;
tty->receive_room = 65536;
@@ -335,6 +342,20 @@ check_again:
} /* end of n_hdlc_send_frames() */
/**
+ * n_hdlc_tty_write_work - Asynchronous callback for transmit wakeup
+ * @work: pointer to work_struct
+ *
+ * Called when low level device driver can accept more send data.
+ */
+static void n_hdlc_tty_write_work(struct work_struct *work)
+{
+ struct n_hdlc *n_hdlc = container_of(work, struct n_hdlc, write_work);
+ struct tty_struct *tty = n_hdlc->tty_for_write_work;
+
+ n_hdlc_send_frames(n_hdlc, tty);
+} /* end of n_hdlc_tty_write_work() */
+
+/**
* n_hdlc_tty_wakeup - Callback for transmit wakeup
* @tty: pointer to associated tty instance data
*
@@ -344,7 +365,7 @@ static void n_hdlc_tty_wakeup(struct tty_struct *tty)
{
struct n_hdlc *n_hdlc = tty->disc_data;
- n_hdlc_send_frames(n_hdlc, tty);
+ schedule_work(&n_hdlc->write_work);
} /* end of n_hdlc_tty_wakeup() */
/**
diff --git a/drivers/tty/serial/8250/8250_bcm7271.c b/drivers/tty/serial/8250/8250_bcm7271.c
index 7f656fac503f..5163d60756b7 100644
--- a/drivers/tty/serial/8250/8250_bcm7271.c
+++ b/drivers/tty/serial/8250/8250_bcm7271.c
@@ -237,6 +237,7 @@ struct brcmuart_priv {
u32 rx_err;
u32 rx_timeout;
u32 rx_abort;
+ u32 saved_mctrl;
};
static struct dentry *brcmuart_debugfs_root;
@@ -1133,16 +1134,27 @@ static int brcmuart_remove(struct platform_device *pdev)
static int __maybe_unused brcmuart_suspend(struct device *dev)
{
struct brcmuart_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
+ struct uart_port *port = &up->port;
serial8250_suspend_port(priv->line);
clk_disable_unprepare(priv->baud_mux_clk);
+ /*
+ * This will prevent resume from enabling RTS before the
+ * baud rate has been resored.
+ */
+ priv->saved_mctrl = port->mctrl;
+ port->mctrl = 0;
+
return 0;
}
static int __maybe_unused brcmuart_resume(struct device *dev)
{
struct brcmuart_priv *priv = dev_get_drvdata(dev);
+ struct uart_8250_port *up = serial8250_get_port(priv->line);
+ struct uart_port *port = &up->port;
int ret;
ret = clk_prepare_enable(priv->baud_mux_clk);
@@ -1165,6 +1177,7 @@ static int __maybe_unused brcmuart_resume(struct device *dev)
start_rx_dma(serial8250_get_port(priv->line));
}
serial8250_resume_port(priv->line);
+ port->mctrl = priv->saved_mctrl;
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_fintek.c b/drivers/tty/serial/8250/8250_fintek.c
index 31c9e83ea3cb..251f0018ae8c 100644
--- a/drivers/tty/serial/8250/8250_fintek.c
+++ b/drivers/tty/serial/8250/8250_fintek.c
@@ -290,25 +290,6 @@ static void fintek_8250_set_max_fifo(struct fintek_8250 *pdata)
}
}
-static void fintek_8250_goto_highspeed(struct uart_8250_port *uart,
- struct fintek_8250 *pdata)
-{
- sio_write_reg(pdata, LDN, pdata->index);
-
- switch (pdata->pid) {
- case CHIP_ID_F81966:
- case CHIP_ID_F81866: /* set uart clock for high speed serial mode */
- sio_write_mask_reg(pdata, F81866_UART_CLK,
- F81866_UART_CLK_MASK,
- F81866_UART_CLK_14_769MHZ);
-
- uart->port.uartclk = 921600 * 16;
- break;
- default: /* leave clock speed untouched */
- break;
- }
-}
-
static void fintek_8250_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
@@ -430,7 +411,6 @@ static int probe_setup_port(struct fintek_8250 *pdata,
fintek_8250_set_irq_mode(pdata, level_mode);
fintek_8250_set_max_fifo(pdata);
- fintek_8250_goto_highspeed(uart, pdata);
fintek_8250_exit_key(addr[i]);
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 5d43de143f33..60f8fffdfd77 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1324,29 +1324,33 @@ pericom_do_set_divisor(struct uart_port *port, unsigned int baud,
{
int scr;
int lcr;
- int actual_baud;
- int tolerance;
- for (scr = 5 ; scr <= 15 ; scr++) {
- actual_baud = 921600 * 16 / scr;
- tolerance = actual_baud / 50;
+ for (scr = 16; scr > 4; scr--) {
+ unsigned int maxrate = port->uartclk / scr;
+ unsigned int divisor = max(maxrate / baud, 1U);
+ int delta = maxrate / divisor - baud;
- if ((baud < actual_baud + tolerance) &&
- (baud > actual_baud - tolerance)) {
+ if (baud > maxrate + baud / 50)
+ continue;
+ if (delta > baud / 50)
+ divisor++;
+
+ if (divisor > 0xffff)
+ continue;
+
+ /* Update delta due to possible divisor change */
+ delta = maxrate / divisor - baud;
+ if (abs(delta) < baud / 50) {
lcr = serial_port_in(port, UART_LCR);
serial_port_out(port, UART_LCR, lcr | 0x80);
-
- serial_port_out(port, UART_DLL, 1);
- serial_port_out(port, UART_DLM, 0);
+ serial_port_out(port, UART_DLL, divisor & 0xff);
+ serial_port_out(port, UART_DLM, divisor >> 8 & 0xff);
serial_port_out(port, 2, 16 - scr);
serial_port_out(port, UART_LCR, lcr);
return;
- } else if (baud > actual_baud) {
- break;
}
}
- serial8250_do_set_divisor(port, baud, quot, quot_frac);
}
static int pci_pericom_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -2291,7 +2295,7 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.setup = pci_pericom_setup_four_at_eight,
},
{
- .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .vendor = PCI_VENDOR_ID_ACCESIO,
.device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
@@ -2299,6 +2303,13 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
},
{
.vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup_four_at_eight,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
.device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 5775cbff8f6e..46e2079ad1aa 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -2024,13 +2024,6 @@ void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl)
struct uart_8250_port *up = up_to_u8250p(port);
unsigned char mcr;
- if (port->rs485.flags & SER_RS485_ENABLED) {
- if (serial8250_in_MCR(up) & UART_MCR_RTS)
- mctrl |= TIOCM_RTS;
- else
- mctrl &= ~TIOCM_RTS;
- }
-
mcr = serial8250_TIOCM_to_MCR(mctrl);
mcr = (mcr & up->mcr_mask) | up->mcr_force | up->mcr;
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 6ff94cfcd9db..fc543ac97c13 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1533,7 +1533,7 @@ config SERIAL_LITEUART
tristate "LiteUART serial port support"
depends on HAS_IOMEM
depends on OF || COMPILE_TEST
- depends on LITEX
+ depends on LITEX || COMPILE_TEST
select SERIAL_CORE
help
This driver is for the FPGA-based LiteUART serial controller from LiteX
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d361cd84ff8c..52518a606c06 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2947,6 +2947,7 @@ MODULE_DEVICE_TABLE(of, sbsa_uart_of_match);
static const struct acpi_device_id __maybe_unused sbsa_uart_acpi_match[] = {
{ "ARMH0011", 0 },
+ { "ARMHB000", 0 },
{},
};
MODULE_DEVICE_TABLE(acpi, sbsa_uart_acpi_match);
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index b1e7190ae483..ac5112def40d 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -2625,6 +2625,7 @@ OF_EARLYCON_DECLARE(lpuart, "fsl,vf610-lpuart", lpuart_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1021a-lpuart", lpuart32_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,ls1028a-lpuart", ls1028a_early_console_setup);
OF_EARLYCON_DECLARE(lpuart32, "fsl,imx7ulp-lpuart", lpuart32_imx_early_console_setup);
+OF_EARLYCON_DECLARE(lpuart32, "fsl,imx8qxp-lpuart", lpuart32_imx_early_console_setup);
EARLYCON_DECLARE(lpuart, lpuart_early_console_setup);
EARLYCON_DECLARE(lpuart32, lpuart32_early_console_setup);
diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
index dbc0559a9157..2941659e5274 100644
--- a/drivers/tty/serial/liteuart.c
+++ b/drivers/tty/serial/liteuart.c
@@ -270,8 +270,10 @@ static int liteuart_probe(struct platform_device *pdev)
/* get membase */
port->membase = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
- if (IS_ERR(port->membase))
- return PTR_ERR(port->membase);
+ if (IS_ERR(port->membase)) {
+ ret = PTR_ERR(port->membase);
+ goto err_erase_id;
+ }
/* values not from device tree */
port->dev = &pdev->dev;
@@ -285,7 +287,18 @@ static int liteuart_probe(struct platform_device *pdev)
port->line = dev_id;
spin_lock_init(&port->lock);
- return uart_add_one_port(&liteuart_driver, &uart->port);
+ platform_set_drvdata(pdev, port);
+
+ ret = uart_add_one_port(&liteuart_driver, &uart->port);
+ if (ret)
+ goto err_erase_id;
+
+ return 0;
+
+err_erase_id:
+ xa_erase(&liteuart_array, uart->id);
+
+ return ret;
}
static int liteuart_remove(struct platform_device *pdev)
@@ -293,6 +306,7 @@ static int liteuart_remove(struct platform_device *pdev)
struct uart_port *port = platform_get_drvdata(pdev);
struct liteuart_port *uart = to_liteuart_port(port);
+ uart_remove_one_port(&liteuart_driver, port);
xa_erase(&liteuart_array, uart->id);
return 0;
diff --git a/drivers/tty/serial/msm_serial.c b/drivers/tty/serial/msm_serial.c
index fcef7a961430..489d19274f9a 100644
--- a/drivers/tty/serial/msm_serial.c
+++ b/drivers/tty/serial/msm_serial.c
@@ -598,6 +598,9 @@ static void msm_start_rx_dma(struct msm_port *msm_port)
u32 val;
int ret;
+ if (IS_ENABLED(CONFIG_CONSOLE_POLL))
+ return;
+
if (!dma->chan)
return;
diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c
index 45e2e4109acd..b6223fab0687 100644
--- a/drivers/tty/serial/serial-tegra.c
+++ b/drivers/tty/serial/serial-tegra.c
@@ -1506,7 +1506,7 @@ static struct tegra_uart_chip_data tegra20_uart_chip_data = {
.fifo_mode_enable_status = false,
.uart_max_port = 5,
.max_dma_burst_bytes = 4,
- .error_tolerance_low_range = 0,
+ .error_tolerance_low_range = -4,
.error_tolerance_high_range = 4,
};
@@ -1517,7 +1517,7 @@ static struct tegra_uart_chip_data tegra30_uart_chip_data = {
.fifo_mode_enable_status = false,
.uart_max_port = 5,
.max_dma_burst_bytes = 4,
- .error_tolerance_low_range = 0,
+ .error_tolerance_low_range = -4,
.error_tolerance_high_range = 4,
};
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 1e738f265eea..61e3dd0222af 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -1075,6 +1075,11 @@ uart_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
goto out;
if (!tty_io_error(tty)) {
+ if (uport->rs485.flags & SER_RS485_ENABLED) {
+ set &= ~TIOCM_RTS;
+ clear &= ~TIOCM_RTS;
+ }
+
uart_update_mctrl(uport, set, clear);
ret = 0;
}
@@ -1549,6 +1554,7 @@ static void uart_tty_port_shutdown(struct tty_port *port)
{
struct uart_state *state = container_of(port, struct uart_state, port);
struct uart_port *uport = uart_port_check(state);
+ char *buf;
/*
* At this point, we stop accepting input. To do this, we
@@ -1570,8 +1576,18 @@ static void uart_tty_port_shutdown(struct tty_port *port)
*/
tty_port_set_suspended(port, 0);
- uart_change_pm(state, UART_PM_STATE_OFF);
+ /*
+ * Free the transmit buffer.
+ */
+ spin_lock_irq(&uport->lock);
+ buf = state->xmit.buf;
+ state->xmit.buf = NULL;
+ spin_unlock_irq(&uport->lock);
+ if (buf)
+ free_page((unsigned long)buf);
+
+ uart_change_pm(state, UART_PM_STATE_OFF);
}
static void uart_wait_until_sent(struct tty_struct *tty, int timeout)
generated by cgit (git 2.34.1) at 2024-04-20 05:58:35 +0000