diff options
Diffstat (limited to 'drivers/tty')
| -rw-r--r-- | drivers/tty/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/tty/n_gsm.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_early.c | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 40 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pcilib.c | 13 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pcilib.h | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_port.c | 29 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/Kconfig | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/amba-pl010.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/amba-pl011.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/cpm_uart.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/earlycon.c | 23 | ||||
| -rw-r--r-- | drivers/tty/serial/imx.c | 15 | ||||
| -rw-r--r-- | drivers/tty/serial/qcom_geni_serial.c | 103 | ||||
| -rw-r--r-- | drivers/tty/serial/serial_core.c | 2 | ||||
| -rw-r--r-- | drivers/tty/serial/ucc_uart.c | 2 | ||||
| -rw-r--r-- | drivers/tty/sysrq.c | 18 | ||||
| -rw-r--r-- | drivers/tty/vt/vt.c | 2 |
19 files changed, 189 insertions, 82 deletions
diff --git a/drivers/tty/Kconfig b/drivers/tty/Kconfig index a45d423ad10f..63a494d36a1f 100644 --- a/drivers/tty/Kconfig +++ b/drivers/tty/Kconfig @@ -220,7 +220,7 @@ config MOXA_INTELLIO config MOXA_SMARTIO tristate "Moxa SmartIO support v. 2.0" - depends on SERIAL_NONSTANDARD && PCI + depends on SERIAL_NONSTANDARD && PCI && HAS_IOPORT help Say Y here if you have a Moxa SmartIO multiport serial card and/or want to help develop a new version of this driver. @@ -302,7 +302,7 @@ config GOLDFISH_TTY_EARLY_CONSOLE config IPWIRELESS tristate "IPWireless 3G UMTS PCMCIA card support" - depends on PCMCIA && NETDEVICES + depends on PCMCIA && NETDEVICES && HAS_IOPORT select PPP help This is a driver for 3G UMTS PCMCIA card from IPWireless company. In diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 5d37a0984916..252849910588 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -3157,6 +3157,8 @@ static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc) mutex_unlock(&gsm->mutex); /* Now wipe the queues */ tty_ldisc_flush(gsm->tty); + + guard(spinlock_irqsave)(&gsm->tx_lock); list_for_each_entry_safe(txq, ntxq, &gsm->tx_ctrl_list, list) kfree(txq); INIT_LIST_HEAD(&gsm->tx_ctrl_list); diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 6176083d0341..842422921765 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -46,8 +46,10 @@ static unsigned int serial8250_early_in(struct uart_port *port, int offset) return readl(port->membase + offset); case UPIO_MEM32BE: return ioread32be(port->membase + offset); +#ifdef CONFIG_HAS_IOPORT case UPIO_PORT: return inb(port->iobase + offset); +#endif default: return 0; } @@ -70,9 +72,11 @@ static void serial8250_early_out(struct uart_port *port, int offset, int value) case UPIO_MEM32BE: iowrite32be(value, port->membase + offset); break; +#ifdef CONFIG_HAS_IOPORT case UPIO_PORT: outb(value, port->iobase + offset); break; +#endif } } diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 6709b6a5f301..7d7a6d62c09c 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -964,6 +964,9 @@ static int pci_ite887x_init(struct pci_dev *dev) struct resource *iobase = NULL; u32 miscr, uartbar, ioport; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); + /* search for the base-ioport */ for (i = 0; i < ARRAY_SIZE(inta_addr); i++) { iobase = request_region(inta_addr[i], ITE_887x_IOSIZE, @@ -1514,6 +1517,9 @@ static int pci_quatech_init(struct pci_dev *dev) const struct pci_device_id *match; bool amcc = false; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); + match = pci_match_id(quatech_cards, dev); if (match) amcc = match->driver_data; @@ -1538,6 +1544,9 @@ static int pci_quatech_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + /* Needed by pci_quatech calls below */ port->port.iobase = pci_resource_start(priv->dev, FL_GET_BASE(board->flags)); /* Set up the clocking */ @@ -1655,6 +1664,9 @@ static int pci_fintek_setup(struct serial_private *priv, u8 config_base; u16 iobase; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(pdev); + config_base = 0x40 + 0x08 * idx; /* Get the io address from configuration space */ @@ -1686,6 +1698,9 @@ static int pci_fintek_init(struct pci_dev *dev) u8 config_base; struct serial_private *priv = pci_get_drvdata(dev); + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); + if (!(pci_resource_flags(dev, 5) & IORESOURCE_IO) || !(pci_resource_flags(dev, 4) & IORESOURCE_IO) || !(pci_resource_flags(dev, 3) & IORESOURCE_IO)) @@ -1864,6 +1879,9 @@ static int kt_serial_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + port->port.flags |= UPF_BUG_THRE; port->port.serial_in = kt_serial_in; port->port.handle_break = kt_handle_break; @@ -1884,6 +1902,9 @@ pci_wch_ch353_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + port->port.flags |= UPF_FIXED_TYPE; port->port.type = PORT_16550A; return pci_default_setup(priv, board, port, idx); @@ -1894,6 +1915,9 @@ pci_wch_ch355_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + port->port.flags |= UPF_FIXED_TYPE; port->port.type = PORT_16550A; return pci_default_setup(priv, board, port, idx); @@ -1904,6 +1928,9 @@ pci_wch_ch38x_setup(struct serial_private *priv, const struct pciserial_board *board, struct uart_8250_port *port, int idx) { + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + port->port.flags |= UPF_FIXED_TYPE; port->port.type = PORT_16850; return pci_default_setup(priv, board, port, idx); @@ -1918,6 +1945,8 @@ static int pci_wch_ch38x_init(struct pci_dev *dev) int max_port; unsigned long iobase; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); switch (dev->device) { case 0x3853: /* 8 ports */ @@ -1937,6 +1966,11 @@ static void pci_wch_ch38x_exit(struct pci_dev *dev) { unsigned long iobase; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) { + serial_8250_warn_need_ioport(dev); + return; + } + iobase = pci_resource_start(dev, 0); outb(0x0, iobase + CH384_XINT_ENABLE_REG); } @@ -2052,6 +2086,9 @@ static int pci_moxa_init(struct pci_dev *dev) unsigned int i, num_ports = moxa_get_nports(device); u8 val, init_mode = MOXA_RS232; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(dev); + if (!(pci_moxa_supported_rs(dev) & MOXA_SUPP_RS232)) { init_mode = MOXA_RS422; } @@ -2084,6 +2121,9 @@ pci_moxa_setup(struct serial_private *priv, unsigned int bar = FL_GET_BASE(board->flags); int offset; + if (!IS_ENABLED(CONFIG_HAS_IOPORT)) + return serial_8250_warn_need_ioport(priv->dev); + if (board->num_ports == 4 && idx == 3) offset = 7 * board->uart_offset; else diff --git a/drivers/tty/serial/8250/8250_pcilib.c b/drivers/tty/serial/8250/8250_pcilib.c index ea906d721b2c..3bdccf76f71d 100644 --- a/drivers/tty/serial/8250/8250_pcilib.c +++ b/drivers/tty/serial/8250/8250_pcilib.c @@ -12,6 +12,15 @@ #include "8250.h" #include "8250_pcilib.h" +int serial_8250_warn_need_ioport(struct pci_dev *dev) +{ + dev_warn(&dev->dev, + "Serial port not supported because of missing I/O resource\n"); + + return -ENXIO; +} +EXPORT_SYMBOL_NS_GPL(serial_8250_warn_need_ioport, SERIAL_8250_PCI); + int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar, unsigned int offset, int regshift) { @@ -27,12 +36,14 @@ int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, port->port.mapbase = pci_resource_start(dev, bar) + offset; port->port.membase = pcim_iomap_table(dev)[bar] + offset; port->port.regshift = regshift; - } else { + } else if (IS_ENABLED(CONFIG_HAS_IOPORT)) { port->port.iotype = UPIO_PORT; port->port.iobase = pci_resource_start(dev, bar) + offset; port->port.mapbase = 0; port->port.membase = NULL; port->port.regshift = 0; + } else { + return serial_8250_warn_need_ioport(dev); } return 0; } diff --git a/drivers/tty/serial/8250/8250_pcilib.h b/drivers/tty/serial/8250/8250_pcilib.h index 1aaf1b50ce9c..16a274574cde 100644 --- a/drivers/tty/serial/8250/8250_pcilib.h +++ b/drivers/tty/serial/8250/8250_pcilib.h @@ -13,3 +13,5 @@ struct uart_8250_port; int serial8250_pci_setup_port(struct pci_dev *dev, struct uart_8250_port *port, u8 bar, unsigned int offset, int regshift); + +int serial_8250_warn_need_ioport(struct pci_dev *dev); diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c index 3509af7dc52b..4d63d80e78a9 100644 --- a/drivers/tty/serial/8250/8250_port.c +++ b/drivers/tty/serial/8250/8250_port.c @@ -338,6 +338,7 @@ static void default_serial_dl_write(struct uart_8250_port *up, u32 value) serial_out(up, UART_DLM, value >> 8 & 0xff); } +#ifdef CONFIG_HAS_IOPORT static unsigned int hub6_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -351,6 +352,7 @@ static void hub6_serial_out(struct uart_port *p, int offset, int value) outb(p->hub6 - 1 + offset, p->iobase); outb(value, p->iobase + 1); } +#endif /* CONFIG_HAS_IOPORT */ static unsigned int mem_serial_in(struct uart_port *p, int offset) { @@ -400,6 +402,7 @@ static unsigned int mem32be_serial_in(struct uart_port *p, int offset) return ioread32be(p->membase + offset); } +#ifdef CONFIG_HAS_IOPORT static unsigned int io_serial_in(struct uart_port *p, int offset) { offset = offset << p->regshift; @@ -411,6 +414,15 @@ static void io_serial_out(struct uart_port *p, int offset, int value) offset = offset << p->regshift; outb(value, p->iobase + offset); } +#endif +static unsigned int no_serial_in(struct uart_port *p, int offset) +{ + return (unsigned int)-1; +} + +static void no_serial_out(struct uart_port *p, int offset, int value) +{ +} static int serial8250_default_handle_irq(struct uart_port *port); @@ -422,10 +434,12 @@ static void set_io_from_upio(struct uart_port *p) up->dl_write = default_serial_dl_write; switch (p->iotype) { +#ifdef CONFIG_HAS_IOPORT case UPIO_HUB6: p->serial_in = hub6_serial_in; p->serial_out = hub6_serial_out; break; +#endif case UPIO_MEM: p->serial_in = mem_serial_in; @@ -446,11 +460,16 @@ static void set_io_from_upio(struct uart_port *p) p->serial_in = mem32be_serial_in; p->serial_out = mem32be_serial_out; break; - - default: +#ifdef CONFIG_HAS_IOPORT + case UPIO_PORT: p->serial_in = io_serial_in; p->serial_out = io_serial_out; break; +#endif + default: + WARN(1, "Unsupported UART type %x\n", p->iotype); + p->serial_in = no_serial_in; + p->serial_out = no_serial_out; } /* Remember loaded iotype */ up->cur_iotype = p->iotype; @@ -1174,7 +1193,7 @@ static void autoconfig(struct uart_8250_port *up) */ scratch = serial_in(up, UART_IER); serial_out(up, UART_IER, 0); -#ifdef __i386__ +#if defined(__i386__) && defined(CONFIG_HAS_IOPORT) outb(0xff, 0x080); #endif /* @@ -1183,7 +1202,7 @@ static void autoconfig(struct uart_8250_port *up) */ scratch2 = serial_in(up, UART_IER) & UART_IER_ALL_INTR; serial_out(up, UART_IER, UART_IER_ALL_INTR); -#ifdef __i386__ +#if defined(__i386__) && defined(CONFIG_HAS_IOPORT) outb(0, 0x080); #endif scratch3 = serial_in(up, UART_IER) & UART_IER_ALL_INTR; @@ -3176,7 +3195,7 @@ static void serial8250_config_port(struct uart_port *port, int flags) static int serial8250_verify_port(struct uart_port *port, struct serial_struct *ser) { - if (ser->irq >= nr_irqs || ser->irq < 0 || + if (ser->irq >= irq_get_nr_irqs() || ser->irq < 0 || ser->baud_base < 9600 || ser->type < PORT_UNKNOWN || ser->type >= ARRAY_SIZE(uart_config) || ser->type == PORT_CIRRUS || ser->type == PORT_STARTECH) diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 47ff50763c04..1eb20350fcf4 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -72,7 +72,7 @@ config SERIAL_8250_16550A_VARIANTS config SERIAL_8250_FINTEK bool "Support for Fintek variants" - depends on SERIAL_8250 + depends on SERIAL_8250 && HAS_IOPORT help Selecting this option will add support for the RS232 and RS485 capabilities of the Fintek F81216A LPC to 4 UART as well similar @@ -163,7 +163,7 @@ config SERIAL_8250_HP300 config SERIAL_8250_CS tristate "8250/16550 PCMCIA device support" - depends on PCMCIA && SERIAL_8250 + depends on PCMCIA && SERIAL_8250 && HAS_IOPORT help Say Y here to enable support for 16-bit PCMCIA serial devices, including serial port cards, modems, and the modem functions of diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 28e4beeabf8f..45f0f779fbf9 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -877,7 +877,7 @@ config SERIAL_TXX9_STDSERIAL config SERIAL_JSM tristate "Digi International NEO and Classic PCI Support" - depends on PCI + depends on PCI && HAS_IOPORT select SERIAL_CORE help This is a driver for Digi International's Neo and Classic series diff --git a/drivers/tty/serial/amba-pl010.c b/drivers/tty/serial/amba-pl010.c index eabbf8afc9b5..c3a7fad02ac9 100644 --- a/drivers/tty/serial/amba-pl010.c +++ b/drivers/tty/serial/amba-pl010.c @@ -499,7 +499,7 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser) int ret = 0; if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) + if (ser->irq < 0 || ser->irq >= irq_get_nr_irqs()) ret = -EINVAL; if (ser->baud_base < 9600) ret = -EINVAL; diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 7d0134ecd82f..1c60850030b1 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -2202,7 +2202,7 @@ static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser) if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA) ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) + if (ser->irq < 0 || ser->irq >= irq_get_nr_irqs()) ret = -EINVAL; if (ser->baud_base < 9600) ret = -EINVAL; diff --git a/drivers/tty/serial/cpm_uart.c b/drivers/tty/serial/cpm_uart.c index a927478f581d..6eb8625de435 100644 --- a/drivers/tty/serial/cpm_uart.c +++ b/drivers/tty/serial/cpm_uart.c @@ -631,7 +631,7 @@ static int cpm_uart_verify_port(struct uart_port *port, if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) ret = -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) + if (ser->irq < 0 || ser->irq >= irq_get_nr_irqs()) ret = -EINVAL; if (ser->baud_base < 9600) ret = -EINVAL; diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c index a5fbb6ed38ae..ab9af37f6cda 100644 --- a/drivers/tty/serial/earlycon.c +++ b/drivers/tty/serial/earlycon.c @@ -248,6 +248,29 @@ static int __init param_setup_earlycon(char *buf) } early_param("earlycon", param_setup_earlycon); +/* + * The `console` parameter is overloaded. It's handled here as an early param + * and in `printk.c` as a late param. It's possible to specify an early + * `bootconsole` using `earlycon=uartXXXX` (handled above), or via + * the `console=uartXXX` alias. See the comment in `8250_early.c`. + */ +static int __init param_setup_earlycon_console_alias(char *buf) +{ + /* + * A plain `console` parameter must not enable the SPCR `bootconsole` + * like a plain `earlycon` does. + * + * A `console=` parameter that specifies an empty value is used to + * disable the `console`, not the `earlycon` `bootconsole`. The + * disabling of the `console` is handled by `printk.c`. + */ + if (!buf || !buf[0]) + return 0; + + return param_setup_earlycon(buf); +} +early_param("console", param_setup_earlycon_console_alias); + #ifdef CONFIG_OF_EARLY_FLATTREE int __init of_setup_earlycon(const struct earlycon_id *match, diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 67d4a72eda77..90974d338f3c 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -762,6 +762,21 @@ static irqreturn_t __imx_uart_rtsint(int irq, void *dev_id) imx_uart_writel(sport, USR1_RTSD, USR1); usr1 = imx_uart_readl(sport, USR1) & USR1_RTSS; + /* + * Update sport->old_status here, so any follow-up calls to + * imx_uart_mctrl_check() will be able to recognize that RTS + * state changed since last imx_uart_mctrl_check() call. + * + * In case RTS has been detected as asserted here and later on + * deasserted by the time imx_uart_mctrl_check() was called, + * imx_uart_mctrl_check() can detect the RTS state change and + * trigger uart_handle_cts_change() to unblock the port for + * further TX transfers. + */ + if (usr1 & USR1_RTSS) + sport->old_status |= TIOCM_CTS; + else + sport->old_status &= ~TIOCM_CTS; uart_handle_cts_change(&sport->port, usr1); wake_up_interruptible(&sport->port.state->port.delta_msr_wait); diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index 6f0db310cf69..5dfe4e599ad6 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -147,6 +147,7 @@ static struct uart_driver qcom_geni_uart_driver; static void __qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport); static void qcom_geni_serial_cancel_tx_cmd(struct uart_port *uport); +static int qcom_geni_serial_port_setup(struct uart_port *uport); static inline struct qcom_geni_serial_port *to_dev_port(struct uart_port *uport) { @@ -395,6 +396,23 @@ static void qcom_geni_serial_poll_put_char(struct uart_port *uport, writel(c, uport->membase + SE_GENI_TX_FIFOn); qcom_geni_serial_poll_tx_done(uport); } + +static int qcom_geni_serial_poll_init(struct uart_port *uport) +{ + struct qcom_geni_serial_port *port = to_dev_port(uport); + int ret; + + if (!port->setup) { + ret = qcom_geni_serial_port_setup(uport); + if (ret) + return ret; + } + + if (!qcom_geni_serial_secondary_active(uport)) + geni_se_setup_s_cmd(&port->se, UART_START_READ, 0); + + return 0; +} #endif #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE @@ -562,7 +580,7 @@ static void handle_rx_console(struct uart_port *uport, u32 bytes, bool drop) } #endif /* CONFIG_SERIAL_QCOM_GENI_CONSOLE */ -static void handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) +static void handle_rx_uart(struct uart_port *uport, u32 bytes) { struct qcom_geni_serial_port *port = to_dev_port(uport); struct tty_port *tport = &uport->state->port; @@ -570,9 +588,8 @@ static void handle_rx_uart(struct uart_port *uport, u32 bytes, bool drop) ret = tty_insert_flip_string(tport, port->rx_buf, bytes); if (ret != bytes) { - dev_err(uport->dev, "%s:Unable to push data ret %d_bytes %d\n", - __func__, ret, bytes); - WARN_ON_ONCE(1); + dev_err_ratelimited(uport->dev, "failed to push data (%d < %u)\n", + ret, bytes); } uport->icount.rx += ret; tty_flip_buffer_push(tport); @@ -787,17 +804,27 @@ static void qcom_geni_serial_start_rx_fifo(struct uart_port *uport) static void qcom_geni_serial_stop_rx_dma(struct uart_port *uport) { struct qcom_geni_serial_port *port = to_dev_port(uport); + bool done; if (!qcom_geni_serial_secondary_active(uport)) return; geni_se_cancel_s_cmd(&port->se); - qcom_geni_serial_poll_bit(uport, SE_GENI_S_IRQ_STATUS, - S_CMD_CANCEL_EN, true); - - if (qcom_geni_serial_secondary_active(uport)) + done = qcom_geni_serial_poll_bit(uport, SE_DMA_RX_IRQ_STAT, + RX_EOT, true); + if (done) { + writel(RX_EOT | RX_DMA_DONE, + uport->membase + SE_DMA_RX_IRQ_CLR); + } else { qcom_geni_serial_abort_rx(uport); + writel(1, uport->membase + SE_DMA_RX_FSM_RST); + qcom_geni_serial_poll_bit(uport, SE_DMA_RX_IRQ_STAT, + RX_RESET_DONE, true); + writel(RX_RESET_DONE | RX_DMA_DONE, + uport->membase + SE_DMA_RX_IRQ_CLR); + } + if (port->rx_dma_addr) { geni_se_rx_dma_unprep(&port->se, port->rx_dma_addr, DMA_RX_BUF_SIZE); @@ -846,7 +873,7 @@ static void qcom_geni_serial_handle_rx_dma(struct uart_port *uport, bool drop) } if (!drop) - handle_rx_uart(uport, rx_in, drop); + handle_rx_uart(uport, rx_in); ret = geni_se_rx_dma_prep(&port->se, port->rx_buf, DMA_RX_BUF_SIZE, @@ -1096,10 +1123,12 @@ static void qcom_geni_serial_shutdown(struct uart_port *uport) { disable_irq(uport->irq); + uart_port_lock_irq(uport); qcom_geni_serial_stop_tx(uport); qcom_geni_serial_stop_rx(uport); qcom_geni_serial_cancel_tx_cmd(uport); + uart_port_unlock_irq(uport); } static void qcom_geni_serial_flush_buffer(struct uart_port *uport) @@ -1152,7 +1181,6 @@ static int qcom_geni_serial_port_setup(struct uart_port *uport) false, true, true); geni_se_init(&port->se, UART_RX_WM, port->rx_fifo_depth - 2); geni_se_select_mode(&port->se, port->dev_data->mode); - qcom_geni_serial_start_rx(uport); port->setup = true; return 0; @@ -1168,6 +1196,11 @@ static int qcom_geni_serial_startup(struct uart_port *uport) if (ret) return ret; } + + uart_port_lock_irq(uport); + qcom_geni_serial_start_rx(uport); + uart_port_unlock_irq(uport); + enable_irq(uport->irq); return 0; @@ -1253,7 +1286,6 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, unsigned int avg_bw_core; unsigned long timeout; - qcom_geni_serial_stop_rx(uport); /* baud rate */ baud = uart_get_baud_rate(uport, termios, old, 300, 4000000); @@ -1269,7 +1301,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, dev_err(port->se.dev, "Couldn't find suitable clock rate for %u\n", baud * sampling_rate); - goto out_restart_rx; + return; } dev_dbg(port->se.dev, "desired_rate = %u, clk_rate = %lu, clk_div = %u\n", @@ -1360,8 +1392,6 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, writel(stop_bit_len, uport->membase + SE_UART_TX_STOP_BIT_LEN); writel(ser_clk_cfg, uport->membase + GENI_SER_M_CLK_CFG); writel(ser_clk_cfg, uport->membase + GENI_SER_S_CLK_CFG); -out_restart_rx: - qcom_geni_serial_start_rx(uport); } #ifdef CONFIG_SERIAL_QCOM_GENI_CONSOLE @@ -1582,7 +1612,7 @@ static const struct uart_ops qcom_geni_console_pops = { #ifdef CONFIG_CONSOLE_POLL .poll_get_char = qcom_geni_serial_get_char, .poll_put_char = qcom_geni_serial_poll_put_char, - .poll_init = qcom_geni_serial_port_setup, + .poll_init = qcom_geni_serial_poll_init, #endif .pm = qcom_geni_serial_pm, }; @@ -1749,7 +1779,7 @@ static void qcom_geni_serial_remove(struct platform_device *pdev) uart_remove_one_port(drv, &port->uport); } -static int qcom_geni_serial_sys_suspend(struct device *dev) +static int qcom_geni_serial_suspend(struct device *dev) { struct qcom_geni_serial_port *port = dev_get_drvdata(dev); struct uart_port *uport = &port->uport; @@ -1766,7 +1796,7 @@ static int qcom_geni_serial_sys_suspend(struct device *dev) return uart_suspend_port(private_data->drv, uport); } -static int qcom_geni_serial_sys_resume(struct device *dev) +static int qcom_geni_serial_resume(struct device *dev) { int ret; struct qcom_geni_serial_port *port = dev_get_drvdata(dev); @@ -1781,38 +1811,6 @@ static int qcom_geni_serial_sys_resume(struct device *dev) return ret; } -static int qcom_geni_serial_sys_hib_resume(struct device *dev) -{ - int ret = 0; - struct uart_port *uport; - struct qcom_geni_private_data *private_data; - struct qcom_geni_serial_port *port = dev_get_drvdata(dev); - - uport = &port->uport; - private_data = uport->private_data; - - if (uart_console(uport)) { - geni_icc_set_tag(&port->se, QCOM_ICC_TAG_ALWAYS); - geni_icc_set_bw(&port->se); - ret = uart_resume_port(private_data->drv, uport); - /* - * For hibernation usecase clients for - * console UART won't call port setup during restore, - * hence call port setup for console uart. - */ - qcom_geni_serial_port_setup(uport); - } else { - /* - * Peripheral register settings are lost during hibernation. - * Update setup flag such that port setup happens again - * during next session. Clients of HS-UART will close and - * open the port during hibernation. - */ - port->setup = false; - } - return ret; -} - static const struct qcom_geni_device_data qcom_geni_console_data = { .console = true, .mode = GENI_SE_FIFO, @@ -1824,12 +1822,7 @@ static const struct qcom_geni_device_data qcom_geni_uart_data = { }; static const struct dev_pm_ops qcom_geni_serial_pm_ops = { - .suspend = pm_sleep_ptr(qcom_geni_serial_sys_suspend), - .resume = pm_sleep_ptr(qcom_geni_serial_sys_resume), - .freeze = pm_sleep_ptr(qcom_geni_serial_sys_suspend), - .poweroff = pm_sleep_ptr(qcom_geni_serial_sys_suspend), - .restore = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume), - .thaw = pm_sleep_ptr(qcom_geni_serial_sys_hib_resume), + SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_suspend, qcom_geni_serial_resume) }; static const struct of_device_id qcom_geni_serial_match_table[] = { diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index d94d73e45fb6..74fa02b23772 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -919,7 +919,7 @@ static int uart_set_info(struct tty_struct *tty, struct tty_port *port, if (uport->ops->verify_port) retval = uport->ops->verify_port(uport, new_info); - if ((new_info->irq >= nr_irqs) || (new_info->irq < 0) || + if ((new_info->irq >= irq_get_nr_irqs()) || (new_info->irq < 0) || (new_info->baud_base < 9600)) retval = -EINVAL; diff --git a/drivers/tty/serial/ucc_uart.c b/drivers/tty/serial/ucc_uart.c index 53bb8c5ef499..4eed909468ff 100644 --- a/drivers/tty/serial/ucc_uart.c +++ b/drivers/tty/serial/ucc_uart.c @@ -1045,7 +1045,7 @@ static int qe_uart_verify_port(struct uart_port *port, if (ser->type != PORT_UNKNOWN && ser->type != PORT_CPM) return -EINVAL; - if (ser->irq < 0 || ser->irq >= nr_irqs) + if (ser->irq < 0 || ser->irq >= irq_get_nr_irqs()) return -EINVAL; if (ser->baud_base < 9600) diff --git a/drivers/tty/sysrq.c b/drivers/tty/sysrq.c index 930b04e3d148..f85ce02e4725 100644 --- a/drivers/tty/sysrq.c +++ b/drivers/tty/sysrq.c @@ -583,7 +583,6 @@ static void __sysrq_put_key_op(u8 key, const struct sysrq_key_op *op_p) void __handle_sysrq(u8 key, bool check_mask) { const struct sysrq_key_op *op_p; - int orig_log_level; int orig_suppress_printk; int i; @@ -593,13 +592,12 @@ void __handle_sysrq(u8 key, bool check_mask) rcu_sysrq_start(); rcu_read_lock(); /* - * Raise the apparent loglevel to maximum so that the sysrq header - * is shown to provide the user with positive feedback. We do not - * simply emit this at KERN_EMERG as that would change message - * routing in the consumers of /proc/kmsg. + * Enter in the force_console context so that sysrq header is shown to + * provide the user with positive feedback. We do not simply emit this + * at KERN_EMERG as that would change message routing in the consumers + * of /proc/kmsg. */ - orig_log_level = console_loglevel; - console_loglevel = CONSOLE_LOGLEVEL_DEFAULT; + printk_force_console_enter(); op_p = __sysrq_get_key_op(key); if (op_p) { @@ -609,11 +607,11 @@ void __handle_sysrq(u8 key, bool check_mask) */ if (!check_mask || sysrq_on_mask(op_p->enable_mask)) { pr_info("%s\n", op_p->action_msg); - console_loglevel = orig_log_level; + printk_force_console_exit(); op_p->handler(key); } else { pr_info("This sysrq operation is disabled.\n"); - console_loglevel = orig_log_level; + printk_force_console_exit(); } } else { pr_info("HELP : "); @@ -631,7 +629,7 @@ void __handle_sysrq(u8 key, bool check_mask) } } pr_cont("\n"); - console_loglevel = orig_log_level; + printk_force_console_exit(); } rcu_read_unlock(); rcu_sysrq_end(); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index cd87e3d1291e..96842ce817af 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -4726,7 +4726,7 @@ static int con_font_get(struct vc_data *vc, struct console_font_op *op) return -EINVAL; if (op->data) { - font.data = kvmalloc(max_font_size, GFP_KERNEL); + font.data = kvzalloc(max_font_size, GFP_KERNEL); if (!font.data) return -ENOMEM; } else |