diff options
Diffstat (limited to 'drivers/usb/core')
-rw-r--r-- | drivers/usb/core/Kconfig | 27 | ||||
-rw-r--r-- | drivers/usb/core/Makefile | 4 | ||||
-rw-r--r-- | drivers/usb/core/config.c | 98 | ||||
-rw-r--r-- | drivers/usb/core/devio.c | 5 | ||||
-rw-r--r-- | drivers/usb/core/driver.c | 55 | ||||
-rw-r--r-- | drivers/usb/core/endpoint.c | 13 | ||||
-rw-r--r-- | drivers/usb/core/generic.c | 12 | ||||
-rw-r--r-- | drivers/usb/core/hcd-pci.c | 18 | ||||
-rw-r--r-- | drivers/usb/core/hcd.c | 81 | ||||
-rw-r--r-- | drivers/usb/core/hub.c | 281 | ||||
-rw-r--r-- | drivers/usb/core/hub.h | 4 | ||||
-rw-r--r-- | drivers/usb/core/ledtrig-usbport.c | 3 | ||||
-rw-r--r-- | drivers/usb/core/message.c | 7 | ||||
-rw-r--r-- | drivers/usb/core/of.c | 74 | ||||
-rw-r--r-- | drivers/usb/core/phy.c | 120 | ||||
-rw-r--r-- | drivers/usb/core/phy.h | 3 | ||||
-rw-r--r-- | drivers/usb/core/port.c | 76 | ||||
-rw-r--r-- | drivers/usb/core/quirks.c | 28 | ||||
-rw-r--r-- | drivers/usb/core/sysfs.c | 122 | ||||
-rw-r--r-- | drivers/usb/core/urb.c | 2 | ||||
-rw-r--r-- | drivers/usb/core/usb-acpi.c | 100 | ||||
-rw-r--r-- | drivers/usb/core/usb.c | 17 | ||||
-rw-r--r-- | drivers/usb/core/usb.h | 10 |
23 files changed, 887 insertions, 273 deletions
diff --git a/drivers/usb/core/Kconfig b/drivers/usb/core/Kconfig index 351ede4b5de2..58e3ca7e4793 100644 --- a/drivers/usb/core/Kconfig +++ b/drivers/usb/core/Kconfig @@ -116,3 +116,30 @@ config USB_AUTOSUSPEND_DELAY The default value Linux has always had is 2 seconds. Change this value if you want a different delay and cannot modify the command line or module parameter. + +config USB_DEFAULT_AUTHORIZATION_MODE + int "Default authorization mode for USB devices" + range 0 2 + default 1 + depends on USB + help + Select the default USB device authorization mode. Can be overridden + with usbcore.authorized_default command line or module parameter. + + This option allows you to choose whether USB devices that are + connected to the system can be used by default, or if they are + locked down. + + With value 0 all connected USB devices with the exception of root + hub require user space authorization before they can be used. + + With value 1 (default) no user space authorization is required to + use connected USB devices. + + With value 2 all connected USB devices with exception of internal + USB devices require user space authorization before they can be + used. Note that in this mode the differentiation between internal + and external USB devices relies on ACPI, and on systems without + ACPI selecting value 2 is analogous to selecting value 0. + + If unsure, keep the default value. diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile index 7d338e9c0657..ac006abd13b3 100644 --- a/drivers/usb/core/Makefile +++ b/drivers/usb/core/Makefile @@ -12,8 +12,8 @@ usbcore-$(CONFIG_OF) += of.o usbcore-$(CONFIG_USB_PCI) += hcd-pci.o usbcore-$(CONFIG_ACPI) += usb-acpi.o -ifdef CONFIG_USB_ONBOARD_HUB -usbcore-y += ../misc/onboard_usb_hub_pdevs.o +ifdef CONFIG_USB_ONBOARD_DEV +usbcore-y += ../misc/onboard_usb_dev_pdevs.o endif obj-$(CONFIG_USB) += usbcore.o diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 7f8d33f92ddb..fc0cfd94cbab 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -9,6 +9,7 @@ #include <linux/usb/quirks.h> #include <linux/module.h> #include <linux/slab.h> +#include <linux/string_choices.h> #include <linux/device.h> #include <asm/byteorder.h> #include "usb.h" @@ -18,12 +19,6 @@ #define USB_MAXCONFIG 8 /* Arbitrary limit */ - -static inline const char *plural(int n) -{ - return (n == 1 ? "" : "s"); -} - static int find_next_descriptor(unsigned char *buffer, int size, int dt1, int dt2, int *num_skipped) { @@ -69,6 +64,37 @@ static void usb_parse_ssp_isoc_endpoint_companion(struct device *ddev, memcpy(&ep->ssp_isoc_ep_comp, desc, USB_DT_SSP_ISOC_EP_COMP_SIZE); } +static void usb_parse_eusb2_isoc_endpoint_companion(struct device *ddev, + int cfgno, int inum, int asnum, struct usb_host_endpoint *ep, + unsigned char *buffer, int size) +{ + struct usb_eusb2_isoc_ep_comp_descriptor *desc; + struct usb_descriptor_header *h; + + /* + * eUSB2 isochronous endpoint companion descriptor for this endpoint + * shall be declared before the next endpoint or interface descriptor + */ + while (size >= USB_DT_EUSB2_ISOC_EP_COMP_SIZE) { + h = (struct usb_descriptor_header *)buffer; + + if (h->bDescriptorType == USB_DT_EUSB2_ISOC_ENDPOINT_COMP) { + desc = (struct usb_eusb2_isoc_ep_comp_descriptor *)buffer; + ep->eusb2_isoc_ep_comp = *desc; + return; + } + if (h->bDescriptorType == USB_DT_ENDPOINT || + h->bDescriptorType == USB_DT_INTERFACE) + break; + + buffer += h->bLength; + size -= h->bLength; + } + + dev_notice(ddev, "No eUSB2 isoc ep %d companion for config %d interface %d altsetting %d\n", + ep->desc.bEndpointAddress, cfgno, inum, asnum); +} + static void usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno, int inum, int asnum, struct usb_host_endpoint *ep, unsigned char *buffer, int size) @@ -263,8 +289,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int n, i, j, retval; unsigned int maxp; const unsigned short *maxpacket_maxes; + u16 bcdUSB; d = (struct usb_endpoint_descriptor *) buffer; + bcdUSB = le16_to_cpu(udev->descriptor.bcdUSB); buffer += d->bLength; size -= d->bLength; @@ -279,11 +307,11 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, goto skip_to_next_endpoint_or_interface_descriptor; } - i = d->bEndpointAddress & ~USB_ENDPOINT_DIR_MASK; - if (i >= 16 || i == 0) { + i = usb_endpoint_num(d); + if (i == 0) { dev_notice(ddev, "config %d interface %d altsetting %d has an " - "invalid endpoint with address 0x%X, skipping\n", - cfgno, inum, asnum, d->bEndpointAddress); + "invalid descriptor for endpoint zero, skipping\n", + cfgno, inum, asnum); goto skip_to_next_endpoint_or_interface_descriptor; } @@ -291,6 +319,20 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, if (ifp->desc.bNumEndpoints >= num_ep) goto skip_to_next_endpoint_or_interface_descriptor; + /* Save a copy of the descriptor and use it instead of the original */ + endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; + memcpy(&endpoint->desc, d, n); + d = &endpoint->desc; + + /* Clear the reserved bits in bEndpointAddress */ + i = d->bEndpointAddress & + (USB_ENDPOINT_DIR_MASK | USB_ENDPOINT_NUMBER_MASK); + if (i != d->bEndpointAddress) { + dev_notice(ddev, "config %d interface %d altsetting %d has an endpoint descriptor with address 0x%X, changing to 0x%X\n", + cfgno, inum, asnum, d->bEndpointAddress, i); + endpoint->desc.bEndpointAddress = i; + } + /* Check for duplicate endpoint addresses */ if (config_endpoint_is_duplicate(config, inum, asnum, d)) { dev_notice(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n", @@ -308,10 +350,8 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, } } - endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints]; + /* Accept this endpoint */ ++ifp->desc.bNumEndpoints; - - memcpy(&endpoint->desc, d, n); INIT_LIST_HEAD(&endpoint->urb_list); /* @@ -402,15 +442,17 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, /* * Validate the wMaxPacketSize field. - * Some devices have isochronous endpoints in altsetting 0; - * the USB-2 spec requires such endpoints to have wMaxPacketSize = 0 - * (see the end of section 5.6.3), so don't warn about them. + * eUSB2 devices (see USB 2.0 Double Isochronous IN ECN 9.6.6 Endpoint) + * and devices with isochronous endpoints in altsetting 0 (see USB 2.0 + * end of section 5.6.3) have wMaxPacketSize = 0. + * So don't warn about those. */ maxp = le16_to_cpu(endpoint->desc.wMaxPacketSize); - if (maxp == 0 && !(usb_endpoint_xfer_isoc(d) && asnum == 0)) { + + if (maxp == 0 && bcdUSB != 0x0220 && + !(usb_endpoint_xfer_isoc(d) && asnum == 0)) dev_notice(ddev, "config %d interface %d altsetting %d endpoint 0x%X has invalid wMaxPacketSize 0\n", cfgno, inum, asnum, d->bEndpointAddress); - } /* Find the highest legal maxpacket size for this endpoint */ i = 0; /* additional transactions per microframe */ @@ -458,6 +500,12 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, maxp); } + /* Parse a possible eUSB2 periodic endpoint companion descriptor */ + if (bcdUSB == 0x0220 && d->wMaxPacketSize == 0 && + (usb_endpoint_xfer_isoc(d) || usb_endpoint_xfer_int(d))) + usb_parse_eusb2_isoc_endpoint_companion(ddev, cfgno, inum, asnum, + endpoint, buffer, size); + /* Parse a possible SuperSpeed endpoint companion descriptor */ if (udev->speed >= USB_SPEED_SUPER) usb_parse_ss_endpoint_companion(ddev, cfgno, @@ -472,7 +520,7 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, retval = buffer - buffer0 + i; if (n > 0) dev_dbg(ddev, "skipped %d descriptor%s after %s\n", - n, plural(n), "endpoint"); + n, str_plural(n), "endpoint"); return retval; skip_to_next_endpoint_or_interface_descriptor: @@ -551,7 +599,7 @@ static int usb_parse_interface(struct device *ddev, int cfgno, alt->extralen = i; if (n > 0) dev_dbg(ddev, "skipped %d descriptor%s after %s\n", - n, plural(n), "interface"); + n, str_plural(n), "interface"); buffer += i; size -= i; @@ -593,7 +641,7 @@ static int usb_parse_interface(struct device *ddev, int cfgno, dev_notice(ddev, "config %d interface %d altsetting %d has %d " "endpoint descriptor%s, different from the interface " "descriptor's value: %d\n", - cfgno, inum, asnum, n, plural(n), num_ep_orig); + cfgno, inum, asnum, n, str_plural(n), num_ep_orig); return buffer - buffer0; skip_to_next_interface_descriptor: @@ -652,7 +700,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, if (size2 < sizeof(struct usb_descriptor_header)) { dev_notice(ddev, "config %d descriptor has %d excess " "byte%s, ignoring\n", - cfgno, size2, plural(size2)); + cfgno, size2, str_plural(size2)); break; } @@ -742,7 +790,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, if (n != nintf) dev_notice(ddev, "config %d has %d interface%s, different from " "the descriptor's value: %d\n", - cfgno, n, plural(n), nintf_orig); + cfgno, n, str_plural(n), nintf_orig); else if (n == 0) dev_notice(ddev, "config %d has no interfaces?\n", cfgno); config->desc.bNumInterfaces = nintf = n; @@ -786,7 +834,7 @@ static int usb_parse_configuration(struct usb_device *dev, int cfgidx, config->extralen = i; if (n > 0) dev_dbg(ddev, "skipped %d descriptor%s after %s\n", - n, plural(n), "configuration"); + n, str_plural(n), "configuration"); buffer += i; size -= i; @@ -912,7 +960,7 @@ int usb_get_configuration(struct usb_device *dev) result = -EINVAL; goto err; } - length = max((int) le16_to_cpu(desc->wTotalLength), + length = max_t(int, le16_to_cpu(desc->wTotalLength), USB_DT_CONFIG_SIZE); /* Now that we know the length, get the whole thing */ diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 3beb6a862e80..f6ce6e26e0d4 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -238,6 +238,9 @@ static int usbdev_mmap(struct file *file, struct vm_area_struct *vma) dma_addr_t dma_handle = DMA_MAPPING_ERROR; int ret; + if (!(file->f_mode & FMODE_WRITE)) + return -EPERM; + ret = usbfs_increase_memory_usage(size + sizeof(struct usb_memory)); if (ret) goto error; @@ -1295,7 +1298,7 @@ static int do_proc_bulk(struct usb_dev_state *ps, return ret; len1 = bulk->len; - if (len1 < 0 || len1 >= (INT_MAX - sizeof(struct urb))) + if (len1 >= (INT_MAX - sizeof(struct urb))) return -EINVAL; if (bulk->ep & USB_DIR_IN) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e01b1913d02b..460d4dde5994 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -95,9 +95,9 @@ ssize_t usb_store_new_id(struct usb_dynids *dynids, } } - spin_lock(&dynids->lock); + mutex_lock(&usb_dynids_lock); list_add_tail(&dynid->node, &dynids->list); - spin_unlock(&dynids->lock); + mutex_unlock(&usb_dynids_lock); retval = driver_attach(driver); @@ -116,6 +116,7 @@ ssize_t usb_show_dynids(struct usb_dynids *dynids, char *buf) struct usb_dynid *dynid; size_t count = 0; + guard(mutex)(&usb_dynids_lock); list_for_each_entry(dynid, &dynids->list, node) if (dynid->id.bInterfaceClass != 0) count += scnprintf(&buf[count], PAGE_SIZE - count, "%04x %04x %02x\n", @@ -160,7 +161,7 @@ static ssize_t remove_id_store(struct device_driver *driver, const char *buf, if (fields < 2) return -EINVAL; - spin_lock(&usb_driver->dynids.lock); + guard(mutex)(&usb_dynids_lock); list_for_each_entry_safe(dynid, n, &usb_driver->dynids.list, node) { struct usb_device_id *id = &dynid->id; @@ -171,7 +172,6 @@ static ssize_t remove_id_store(struct device_driver *driver, const char *buf, break; } } - spin_unlock(&usb_driver->dynids.lock); return count; } @@ -220,27 +220,24 @@ static void usb_free_dynids(struct usb_driver *usb_drv) { struct usb_dynid *dynid, *n; - spin_lock(&usb_drv->dynids.lock); + guard(mutex)(&usb_dynids_lock); list_for_each_entry_safe(dynid, n, &usb_drv->dynids.list, node) { list_del(&dynid->node); kfree(dynid); } - spin_unlock(&usb_drv->dynids.lock); } static const struct usb_device_id *usb_match_dynamic_id(struct usb_interface *intf, - struct usb_driver *drv) + const struct usb_driver *drv) { struct usb_dynid *dynid; - spin_lock(&drv->dynids.lock); + guard(mutex)(&usb_dynids_lock); list_for_each_entry(dynid, &drv->dynids.list, node) { if (usb_match_one_id(intf, &dynid->id)) { - spin_unlock(&drv->dynids.lock); return &dynid->id; } } - spin_unlock(&drv->dynids.lock); return NULL; } @@ -517,6 +514,19 @@ static int usb_unbind_interface(struct device *dev) return 0; } +static void usb_shutdown_interface(struct device *dev) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_driver *driver; + + if (!dev->driver) + return; + + driver = to_usb_driver(dev->driver); + if (driver->shutdown) + driver->shutdown(intf); +} + /** * usb_driver_claim_interface - bind a driver to an interface * @driver: the driver to be bound @@ -840,7 +850,7 @@ const struct usb_device_id *usb_device_match_id(struct usb_device *udev, EXPORT_SYMBOL_GPL(usb_device_match_id); bool usb_driver_applicable(struct usb_device *udev, - struct usb_device_driver *udrv) + const struct usb_device_driver *udrv) { if (udrv->id_table && udrv->match) return usb_device_match_id(udev, udrv->id_table) != NULL && @@ -855,12 +865,12 @@ bool usb_driver_applicable(struct usb_device *udev, return false; } -static int usb_device_match(struct device *dev, struct device_driver *drv) +static int usb_device_match(struct device *dev, const struct device_driver *drv) { /* devices and interfaces are handled separately */ if (is_usb_device(dev)) { struct usb_device *udev; - struct usb_device_driver *udrv; + const struct usb_device_driver *udrv; /* interface drivers never match devices */ if (!is_usb_device_driver(drv)) @@ -880,7 +890,7 @@ static int usb_device_match(struct device *dev, struct device_driver *drv) } else if (is_usb_interface(dev)) { struct usb_interface *intf; - struct usb_driver *usb_drv; + const struct usb_driver *usb_drv; const struct usb_device_id *id; /* device drivers never match interfaces */ @@ -1059,10 +1069,10 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner, new_driver->driver.bus = &usb_bus_type; new_driver->driver.probe = usb_probe_interface; new_driver->driver.remove = usb_unbind_interface; + new_driver->driver.shutdown = usb_shutdown_interface; new_driver->driver.owner = owner; new_driver->driver.mod_name = mod_name; new_driver->driver.dev_groups = new_driver->dev_groups; - spin_lock_init(&new_driver->dynids.lock); INIT_LIST_HEAD(&new_driver->dynids.list); retval = driver_register(&new_driver->driver); @@ -1076,15 +1086,14 @@ int usb_register_driver(struct usb_driver *new_driver, struct module *owner, pr_info("%s: registered new interface driver %s\n", usbcore_name, new_driver->name); -out: - return retval; + return 0; out_newid: driver_unregister(&new_driver->driver); - +out: pr_err("%s: error %d registering interface driver %s\n", usbcore_name, retval, new_driver->name); - goto out; + return retval; } EXPORT_SYMBOL_GPL(usb_register_driver); @@ -1710,9 +1719,7 @@ int usb_autoresume_device(struct usb_device *udev) { int status; - status = pm_runtime_get_sync(&udev->dev); - if (status < 0) - pm_runtime_put_sync(&udev->dev); + status = pm_runtime_resume_and_get(&udev->dev); dev_vdbg(&udev->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&udev->dev.power.usage_count), status); @@ -1818,9 +1825,7 @@ int usb_autopm_get_interface(struct usb_interface *intf) { int status; - status = pm_runtime_get_sync(&intf->dev); - if (status < 0) - pm_runtime_put_sync(&intf->dev); + status = pm_runtime_resume_and_get(&intf->dev); dev_vdbg(&intf->dev, "%s: cnt %d -> %d\n", __func__, atomic_read(&intf->dev.power.usage_count), status); diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index a2530811cf7d..e48399401608 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/spinlock.h> #include <linux/slab.h> +#include <linux/sysfs.h> #include <linux/usb.h> #include "usb.h" @@ -39,7 +40,7 @@ static ssize_t field##_show(struct device *dev, \ char *buf) \ { \ struct ep_device *ep = to_ep_device(dev); \ - return sprintf(buf, format_string, ep->desc->field); \ + return sysfs_emit(buf, format_string, ep->desc->field); \ } \ static DEVICE_ATTR_RO(field) @@ -52,7 +53,7 @@ static ssize_t wMaxPacketSize_show(struct device *dev, struct device_attribute *attr, char *buf) { struct ep_device *ep = to_ep_device(dev); - return sprintf(buf, "%04x\n", usb_endpoint_maxp(ep->desc)); + return sysfs_emit(buf, "%04x\n", usb_endpoint_maxp(ep->desc)); } static DEVICE_ATTR_RO(wMaxPacketSize); @@ -76,7 +77,7 @@ static ssize_t type_show(struct device *dev, struct device_attribute *attr, type = "Interrupt"; break; } - return sprintf(buf, "%s\n", type); + return sysfs_emit(buf, "%s\n", type); } static DEVICE_ATTR_RO(type); @@ -95,7 +96,7 @@ static ssize_t interval_show(struct device *dev, struct device_attribute *attr, interval /= 1000; } - return sprintf(buf, "%d%cs\n", interval, unit); + return sysfs_emit(buf, "%d%cs\n", interval, unit); } static DEVICE_ATTR_RO(interval); @@ -111,7 +112,7 @@ static ssize_t direction_show(struct device *dev, struct device_attribute *attr, direction = "in"; else direction = "out"; - return sprintf(buf, "%s\n", direction); + return sysfs_emit(buf, "%s\n", direction); } static DEVICE_ATTR_RO(direction); @@ -141,7 +142,7 @@ static void ep_device_release(struct device *dev) kfree(ep_dev); } -struct device_type usb_ep_device_type = { +const struct device_type usb_ep_device_type = { .name = "usb_endpoint", .release = ep_device_release, }; diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index b134bff5c3fe..9c6ae5e1198b 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -21,14 +21,10 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> +#include <linux/string_choices.h> #include <uapi/linux/usb/audio.h> #include "usb.h" -static inline const char *plural(int n) -{ - return (n == 1 ? "" : "s"); -} - static int is_rndis(struct usb_interface_descriptor *desc) { return desc->bInterfaceClass == USB_CLASS_COMM @@ -194,18 +190,18 @@ int usb_choose_configuration(struct usb_device *udev) if (insufficient_power > 0) dev_info(&udev->dev, "rejected %d configuration%s " "due to insufficient available bus power\n", - insufficient_power, plural(insufficient_power)); + insufficient_power, str_plural(insufficient_power)); if (best) { i = best->desc.bConfigurationValue; dev_dbg(&udev->dev, "configuration #%d chosen from %d choice%s\n", - i, num_configs, plural(num_configs)); + i, num_configs, str_plural(num_configs)); } else { i = -1; dev_warn(&udev->dev, "no configuration chosen from %d choice%s\n", - num_configs, plural(num_configs)); + num_configs, str_plural(num_configs)); } return i; } diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index ee3156f49533..56b534f59907 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -189,7 +189,8 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct hc_driver *driver) * make sure irq setup is not touched for xhci in generic hcd code */ if ((driver->flags & HCD_MASK) < HCD_USB3) { - retval = pci_alloc_irq_vectors(dev, 1, 1, PCI_IRQ_LEGACY | PCI_IRQ_MSI); + retval = pci_alloc_irq_vectors(dev, 1, 1, + PCI_IRQ_INTX | PCI_IRQ_MSI); if (retval < 0) { dev_err(&dev->dev, "Found HC with no IRQ. Check BIOS/PCI %s setup!\n", @@ -421,7 +422,12 @@ static int suspend_common(struct device *dev, pm_message_t msg) bool do_wakeup; int retval; - do_wakeup = PMSG_IS_AUTO(msg) ? true : device_may_wakeup(dev); + if (PMSG_IS_AUTO(msg)) + do_wakeup = true; + else if (PMSG_NO_WAKEUP(msg)) + do_wakeup = false; + else + do_wakeup = device_may_wakeup(dev); /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface @@ -520,6 +526,11 @@ static int hcd_pci_suspend(struct device *dev) return suspend_common(dev, PMSG_SUSPEND); } +static int hcd_pci_freeze(struct device *dev) +{ + return suspend_common(dev, PMSG_FREEZE); +} + static int hcd_pci_suspend_noirq(struct device *dev) { struct pci_dev *pci_dev = to_pci_dev(dev); @@ -589,6 +600,7 @@ static int hcd_pci_restore(struct device *dev) #else #define hcd_pci_suspend NULL +#define hcd_pci_freeze NULL #define hcd_pci_suspend_noirq NULL #define hcd_pci_poweroff_late NULL #define hcd_pci_resume_noirq NULL @@ -623,7 +635,7 @@ const struct dev_pm_ops usb_hcd_pci_pm_ops = { .suspend_noirq = hcd_pci_suspend_noirq, .resume_noirq = hcd_pci_resume_noirq, .resume = hcd_pci_resume, - .freeze = hcd_pci_suspend, + .freeze = hcd_pci_freeze, .freeze_noirq = check_root_hub_suspended, .thaw_noirq = NULL, .thaw = hcd_pci_resume, diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 12b6dfeaf658..c22de97432a0 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -24,7 +24,7 @@ #include <linux/mutex.h> #include <asm/irq.h> #include <asm/byteorder.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include <linux/platform_device.h> #include <linux/workqueue.h> #include <linux/pm_runtime.h> @@ -357,12 +357,10 @@ static const u8 ss_rh_config_descriptor[] = { #define USB_AUTHORIZE_ALL 1 #define USB_AUTHORIZE_INTERNAL 2 -static int authorized_default = USB_AUTHORIZE_WIRED; +static int authorized_default = CONFIG_USB_DEFAULT_AUTHORIZATION_MODE; module_param(authorized_default, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(authorized_default, - "Default USB device authorization: 0 is not authorized, 1 is " - "authorized, 2 is authorized for internal devices, -1 is " - "authorized (default, same as 1)"); + "Default USB device authorization: 0 is not authorized, 1 is authorized (default), 2 is authorized for internal devices, -1 is authorized (same as 1)"); /*-------------------------------------------------------------------------*/ /** @@ -417,7 +415,7 @@ ascii2desc(char const *s, u8 *buf, unsigned len) static unsigned rh_string(int id, struct usb_hcd const *hcd, u8 *data, unsigned len) { - char buf[100]; + char buf[160]; char const *s; static char const langids[4] = {4, USB_DT_STRING, 0x09, 0x04}; @@ -777,7 +775,7 @@ EXPORT_SYMBOL_GPL(usb_hcd_poll_rh_status); /* timer callback */ static void rh_timer_func (struct timer_list *t) { - struct usb_hcd *_hcd = from_timer(_hcd, t, rh_timer); + struct usb_hcd *_hcd = timer_container_of(_hcd, t, rh_timer); usb_hcd_poll_rh_status(_hcd); } @@ -844,7 +842,7 @@ static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) } else { /* Status URB */ if (!hcd->uses_new_polling) - del_timer (&hcd->rh_timer); + timer_delete(&hcd->rh_timer); if (urb == hcd->status_urb) { hcd->status_urb = NULL; usb_hcd_unlink_urb_from_ep(hcd, urb); @@ -868,7 +866,7 @@ static int usb_rh_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) */ static void usb_bus_init (struct usb_bus *bus) { - memset (&bus->devmap, 0, sizeof(struct usb_devmap)); + memset(&bus->devmap, 0, sizeof(bus->devmap)); bus->devnum_next = 1; @@ -964,7 +962,7 @@ static int register_root_hub(struct usb_hcd *hcd) usb_dev->devnum = devnum; usb_dev->bus->devnum_next = devnum + 1; - set_bit (devnum, usb_dev->bus->devmap.devicemap); + set_bit(devnum, usb_dev->bus->devmap); usb_set_device_state(usb_dev, USB_STATE_ADDRESS); mutex_lock(&usb_bus_idr_lock); @@ -1611,7 +1609,7 @@ int usb_hcd_unlink_urb (struct urb *urb, int status) if (retval == 0) retval = -EINPROGRESS; else if (retval != -EIDRM && retval != -EBUSY) - dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n", + dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n", urb, retval); usb_put_dev(udev); } @@ -1625,6 +1623,7 @@ static void __usb_hcd_giveback_urb(struct urb *urb) struct usb_hcd *hcd = bus_to_hcd(urb->dev->bus); struct usb_anchor *anchor = urb->anchor; int status = urb->unlinked; + unsigned long flags; urb->hcpriv = NULL; if (unlikely((urb->transfer_flags & URB_SHORT_NOT_OK) && @@ -1642,13 +1641,14 @@ static void __usb_hcd_giveback_urb(struct urb *urb) /* pass ownership to the completion handler */ urb->status = status; /* - * This function can be called in task context inside another remote - * coverage collection section, but kcov doesn't support that kind of - * recursion yet. Only collect coverage in softirq context for now. + * Only collect coverage in the softirq context and disable interrupts + * to avoid scenarios with nested remote coverage collection sections + * that KCOV does not support. + * See the comment next to kcov_remote_start_usb_softirq() for details. */ - kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum); + flags = kcov_remote_start_usb_softirq((u64)urb->dev->bus->busnum); urb->complete(urb); - kcov_remote_stop_softirq(); + kcov_remote_stop_softirq(flags); usb_anchor_resume_wakeups(anchor); atomic_dec(&urb->use_count); @@ -1664,9 +1664,10 @@ static void __usb_hcd_giveback_urb(struct urb *urb) usb_put_urb(urb); } -static void usb_giveback_urb_bh(struct tasklet_struct *t) +static void usb_giveback_urb_bh(struct work_struct *work) { - struct giveback_urb_bh *bh = from_tasklet(bh, t, bh); + struct giveback_urb_bh *bh = + container_of(work, struct giveback_urb_bh, bh); struct list_head local_list; spin_lock_irq(&bh->lock); @@ -1691,9 +1692,9 @@ static void usb_giveback_urb_bh(struct tasklet_struct *t) spin_lock_irq(&bh->lock); if (!list_empty(&bh->head)) { if (bh->high_prio) - tasklet_hi_schedule(&bh->bh); + queue_work(system_bh_highpri_wq, &bh->bh); else - tasklet_schedule(&bh->bh); + queue_work(system_bh_wq, &bh->bh); } bh->running = false; spin_unlock_irq(&bh->lock); @@ -1706,7 +1707,7 @@ static void usb_giveback_urb_bh(struct tasklet_struct *t) * @status: completion status code for the URB. * * Context: atomic. The completion callback is invoked in caller's context. - * For HCDs with HCD_BH flag set, the completion callback is invoked in tasklet + * For HCDs with HCD_BH flag set, the completion callback is invoked in BH * context (except for URBs submitted to the root hub which always complete in * caller's context). * @@ -1725,7 +1726,7 @@ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) struct giveback_urb_bh *bh; bool running; - /* pass status to tasklet via unlinked */ + /* pass status to BH via unlinked */ if (likely(!urb->unlinked)) urb->unlinked = status; @@ -1747,9 +1748,9 @@ void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status) if (running) ; else if (bh->high_prio) - tasklet_hi_schedule(&bh->bh); + queue_work(system_bh_highpri_wq, &bh->bh); else - tasklet_schedule(&bh->bh); + queue_work(system_bh_wq, &bh->bh); } EXPORT_SYMBOL_GPL(usb_hcd_giveback_urb); @@ -1785,7 +1786,7 @@ rescan: /* kick hcd */ unlink1(hcd, urb, -ESHUTDOWN); dev_dbg (hcd->self.controller, - "shutdown urb %pK ep%d%s-%s\n", + "shutdown urb %p ep%d%s-%s\n", urb, usb_endpoint_num(&ep->desc), is_in ? "in" : "out", usb_ep_type_string(usb_endpoint_type(&ep->desc))); @@ -2540,7 +2541,7 @@ static void init_giveback_urb_bh(struct giveback_urb_bh *bh) spin_lock_init(&bh->lock); INIT_LIST_HEAD(&bh->head); - tasklet_setup(&bh->bh, usb_giveback_urb_bh); + INIT_WORK(&bh->bh, usb_giveback_urb_bh); } struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver, @@ -2767,14 +2768,14 @@ static void usb_stop_hcd(struct usb_hcd *hcd) { hcd->rh_pollable = 0; clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); + timer_delete_sync(&hcd->rh_timer); hcd->driver->stop(hcd); hcd->state = HC_STATE_HALT; /* In case the HCD restarted the timer, stop it again. */ clear_bit(HCD_FLAG_POLL_RH, &hcd->flags); - del_timer_sync(&hcd->rh_timer); + timer_delete_sync(&hcd->rh_timer); } /** @@ -2793,11 +2794,23 @@ int usb_add_hcd(struct usb_hcd *hcd, int retval; struct usb_device *rhdev; struct usb_hcd *shared_hcd; + int skip_phy_initialization; + + if (usb_hcd_is_primary_hcd(hcd)) + skip_phy_initialization = hcd->skip_phy_initialization; + else + skip_phy_initialization = hcd->primary_hcd->skip_phy_initialization; - if (!hcd->skip_phy_initialization && usb_hcd_is_primary_hcd(hcd)) { - hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); - if (IS_ERR(hcd->phy_roothub)) - return PTR_ERR(hcd->phy_roothub); + if (!skip_phy_initialization) { + if (usb_hcd_is_primary_hcd(hcd)) { + hcd->phy_roothub = usb_phy_roothub_alloc(hcd->self.sysdev); + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); + } else { + hcd->phy_roothub = usb_phy_roothub_alloc_usb3_phy(hcd->self.sysdev); + if (IS_ERR(hcd->phy_roothub)) + return PTR_ERR(hcd->phy_roothub); + } retval = usb_phy_roothub_init(hcd->phy_roothub); if (retval) @@ -2926,7 +2939,7 @@ int usb_add_hcd(struct usb_hcd *hcd, && device_can_wakeup(&hcd->self.root_hub->dev)) dev_dbg(hcd->self.controller, "supports USB remote wakeup\n"); - /* initialize tasklets */ + /* initialize BHs */ init_giveback_urb_bh(&hcd->high_prio_bh); hcd->high_prio_bh.high_prio = true; init_giveback_urb_bh(&hcd->low_prio_bh); @@ -3036,7 +3049,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) mutex_unlock(&usb_bus_idr_lock); /* - * tasklet_kill() isn't needed here because: + * flush_work() isn't needed here because: * - driver's disconnect() called from usb_disconnect() should * make sure its URBs are completed during the disconnect() * callback diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index ffd7c99e24a3..770d1e91183c 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -18,12 +18,13 @@ #include <linux/sched/mm.h> #include <linux/list.h> #include <linux/slab.h> +#include <linux/string_choices.h> #include <linux/kcov.h> #include <linux/ioctl.h> #include <linux/usb.h> #include <linux/usbdevice_fs.h> #include <linux/usb/hcd.h> -#include <linux/usb/onboard_hub.h> +#include <linux/usb/onboard_dev.h> #include <linux/usb/otg.h> #include <linux/usb/quirks.h> #include <linux/workqueue.h> @@ -37,6 +38,7 @@ #include <asm/byteorder.h> #include "hub.h" +#include "phy.h" #include "otg_productlist.h" #define USB_VENDOR_GENESYS_LOGIC 0x05e3 @@ -129,7 +131,6 @@ EXPORT_SYMBOL_GPL(ehci_cf_port_reset_rwsem); #define HUB_DEBOUNCE_STEP 25 #define HUB_DEBOUNCE_STABLE 100 -static void hub_release(struct kref *kref); static int usb_reset_and_verify_device(struct usb_device *udev); static int hub_port_disable(struct usb_hub *hub, int port1, int set_state); static bool hub_port_warm_reset_required(struct usb_hub *hub, int port1, @@ -634,6 +635,34 @@ static int hub_ext_port_status(struct usb_hub *hub, int port1, int type, ret = 0; } mutex_unlock(&hub->status_mutex); + + /* + * There is no need to lock status_mutex here, because status_mutex + * protects hub->status, and the phy driver only checks the port + * status without changing the status. + */ + if (!ret) { + struct usb_device *hdev = hub->hdev; + + /* + * Only roothub will be notified of connection changes, + * since the USB PHY only cares about changes at the next + * level. + */ + if (is_root_hub(hdev)) { + struct usb_hcd *hcd = bus_to_hcd(hdev->bus); + bool connect; + bool connect_change; + + connect_change = *change & USB_PORT_STAT_C_CONNECTION; + connect = *status & USB_PORT_STAT_CONNECTION; + if (connect_change && connect) + usb_phy_roothub_notify_connect(hcd->phy_roothub, port1 - 1); + else if (connect_change) + usb_phy_roothub_notify_disconnect(hcd->phy_roothub, port1 - 1); + } + } + return ret; } @@ -668,7 +697,7 @@ static void hub_resubmit_irq_urb(struct usb_hub *hub) static void hub_retry_irq_urb(struct timer_list *t) { - struct usb_hub *hub = from_timer(hub, t, irq_urb_retry); + struct usb_hub *hub = timer_container_of(hub, t, irq_urb_retry); hub_resubmit_irq_urb(hub); } @@ -691,14 +720,14 @@ static void kick_hub_wq(struct usb_hub *hub) */ intf = to_usb_interface(hub->intfdev); usb_autopm_get_interface_no_resume(intf); - kref_get(&hub->kref); + hub_get(hub); if (queue_work(hub_wq, &hub->events)) return; /* the work has already been scheduled */ usb_autopm_put_interface_async(intf); - kref_put(&hub->kref, hub_release); + hub_put(hub); } void usb_kick_hub_wq(struct usb_device *hdev) @@ -1066,7 +1095,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) goto init2; goto init3; } - kref_get(&hub->kref); + hub_get(hub); /* The superspeed hub except for root hub has to use Hub Depth * value as an offset into the route string to locate the bits @@ -1314,7 +1343,7 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) device_unlock(&hdev->dev); } - kref_put(&hub->kref, hub_release); + hub_put(hub); } /* Implement the continuations for the delays above */ @@ -1356,7 +1385,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) } /* Stop hub_wq and related activity */ - del_timer_sync(&hub->irq_urb_retry); + timer_delete_sync(&hub->irq_urb_retry); usb_kill_urb(hub->urb); if (hub->has_indicators) cancel_delayed_work_sync(&hub->leds); @@ -1468,7 +1497,7 @@ static int hub_configure(struct usb_hub *hub, maxchild = hub->descriptor->bNbrPorts; dev_info(hub_dev, "%d port%s detected\n", maxchild, - (maxchild == 1) ? "" : "s"); + str_plural(maxchild)); hub->ports = kcalloc(maxchild, sizeof(struct usb_port *), GFP_KERNEL); if (!hub->ports) { @@ -1730,6 +1759,16 @@ static void hub_release(struct kref *kref) kfree(hub); } +void hub_get(struct usb_hub *hub) +{ + kref_get(&hub->kref); +} + +void hub_put(struct usb_hub *hub) +{ + kref_put(&hub->kref, hub_release); +} + static unsigned highspeed_hubs; static void hub_disconnect(struct usb_interface *intf) @@ -1776,9 +1815,9 @@ static void hub_disconnect(struct usb_interface *intf) if (hub->quirk_disable_autosuspend) usb_autopm_put_interface(intf); - onboard_hub_destroy_pdevs(&hub->onboard_hub_devs); + onboard_dev_destroy_pdevs(&hub->onboard_devs); - kref_put(&hub->kref, hub_release); + hub_put(hub); } static bool hub_descriptor_is_sane(struct usb_host_interface *desc) @@ -1810,6 +1849,17 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) hdev = interface_to_usbdev(intf); /* + * The USB 2.0 spec prohibits hubs from having more than one + * configuration or interface, and we rely on this prohibition. + * Refuse to accept a device that violates it. + */ + if (hdev->descriptor.bNumConfigurations > 1 || + hdev->actconfig->desc.bNumInterfaces > 1) { + dev_err(&intf->dev, "Invalid hub with more than one config or interface\n"); + return -EINVAL; + } + + /* * Set default autosuspend delay as 0 to speedup bus suspend, * based on the below considerations: * @@ -1895,7 +1945,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) INIT_DELAYED_WORK(&hub->leds, led_work); INIT_DELAYED_WORK(&hub->init_work, NULL); INIT_WORK(&hub->events, hub_event); - INIT_LIST_HEAD(&hub->onboard_hub_devs); + INIT_LIST_HEAD(&hub->onboard_devs); spin_lock_init(&hub->irq_urb_lock); timer_setup(&hub->irq_urb_retry, hub_retry_irq_urb, 0); usb_get_intf(intf); @@ -1925,7 +1975,7 @@ static int hub_probe(struct usb_interface *intf, const struct usb_device_id *id) } if (hub_configure(hub, &desc->endpoint[0].desc) >= 0) { - onboard_hub_create_pdevs(hdev, &hub->onboard_hub_devs); + onboard_dev_create_pdevs(hdev, &hub->onboard_devs); return 0; } @@ -2053,9 +2103,19 @@ static void update_port_device_state(struct usb_device *udev) if (udev->parent) { hub = usb_hub_to_struct_hub(udev->parent); - port_dev = hub->ports[udev->portnum - 1]; - WRITE_ONCE(port_dev->state, udev->state); - sysfs_notify_dirent(port_dev->state_kn); + + /* + * The Link Layer Validation System Driver (lvstest) + * has a test step to unbind the hub before running the + * rest of the procedure. This triggers hub_disconnect + * which will set the hub's maxchild to 0, further + * resulting in usb_hub_to_struct_hub returning NULL. + */ + if (hub) { + port_dev = hub->ports[udev->portnum - 1]; + WRITE_ONCE(port_dev->state, udev->state); + sysfs_notify_dirent(port_dev->state_kn); + } } } @@ -2159,13 +2219,12 @@ static void choose_devnum(struct usb_device *udev) mutex_lock(&bus->devnum_next_mutex); /* Try to allocate the next devnum beginning at bus->devnum_next. */ - devnum = find_next_zero_bit(bus->devmap.devicemap, 128, - bus->devnum_next); + devnum = find_next_zero_bit(bus->devmap, 128, bus->devnum_next); if (devnum >= 128) - devnum = find_next_zero_bit(bus->devmap.devicemap, 128, 1); + devnum = find_next_zero_bit(bus->devmap, 128, 1); bus->devnum_next = (devnum >= 127 ? 1 : devnum + 1); if (devnum < 128) { - set_bit(devnum, bus->devmap.devicemap); + set_bit(devnum, bus->devmap); udev->devnum = devnum; } mutex_unlock(&bus->devnum_next_mutex); @@ -2174,7 +2233,7 @@ static void choose_devnum(struct usb_device *udev) static void release_devnum(struct usb_device *udev) { if (udev->devnum > 0) { - clear_bit(udev->devnum, udev->bus->devmap.devicemap); + clear_bit(udev->devnum, udev->bus->devmap); udev->devnum = -1; } } @@ -2388,17 +2447,25 @@ static int usb_enumerate_device_otg(struct usb_device *udev) } } else if (desc->bLength == sizeof (struct usb_otg_descriptor)) { - /* Set a_alt_hnp_support for legacy otg device */ - err = usb_control_msg(udev, - usb_sndctrlpipe(udev, 0), - USB_REQ_SET_FEATURE, 0, - USB_DEVICE_A_ALT_HNP_SUPPORT, - 0, NULL, 0, - USB_CTRL_SET_TIMEOUT); - if (err < 0) - dev_err(&udev->dev, - "set a_alt_hnp_support failed: %d\n", - err); + /* + * We are operating on a legacy OTP device + * These should be told that they are operating + * on the wrong port if we have another port that does + * support HNP + */ + if (bus->otg_port != 0) { + /* Set a_alt_hnp_support for legacy otg device */ + err = usb_control_msg(udev, + usb_sndctrlpipe(udev, 0), + USB_REQ_SET_FEATURE, 0, + USB_DEVICE_A_ALT_HNP_SUPPORT, + 0, NULL, 0, + USB_CTRL_SET_TIMEOUT); + if (err < 0) + dev_err(&udev->dev, + "set a_alt_hnp_support failed: %d\n", + err); + } } } #endif @@ -2608,13 +2675,13 @@ int usb_new_device(struct usb_device *udev) err = sysfs_create_link(&udev->dev.kobj, &port_dev->dev.kobj, "port"); if (err) - goto fail; + goto out_del_dev; err = sysfs_create_link(&port_dev->dev.kobj, &udev->dev.kobj, "device"); if (err) { sysfs_remove_link(&udev->dev.kobj, "port"); - goto fail; + goto out_del_dev; } if (!test_and_set_bit(port1, hub->child_usage_bits)) @@ -2628,6 +2695,8 @@ int usb_new_device(struct usb_device *udev) pm_runtime_put_sync_autosuspend(&udev->dev); return err; +out_del_dev: + device_del(&udev->dev); fail: usb_set_device_state(udev, USB_STATE_NOTATTACHED); pm_runtime_disable(&udev->dev); @@ -4082,16 +4151,16 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, break; default: dev_warn(&udev->dev, "%s: Can't %s non-U1 or U2 state.\n", - __func__, enable ? "enable" : "disable"); + __func__, str_enable_disable(enable)); return -EINVAL; } if (udev->state != USB_STATE_CONFIGURED) { dev_dbg(&udev->dev, "%s: Can't %s %s state " "for unconfigured device.\n", - __func__, enable ? "enable" : "disable", + __func__, str_enable_disable(enable), usb3_lpm_names[state]); - return 0; + return -EINVAL; } if (enable) { @@ -4115,8 +4184,7 @@ static int usb_set_device_initiated_lpm(struct usb_device *udev, } if (ret < 0) { dev_warn(&udev->dev, "%s of device-initiated %s failed.\n", - enable ? "Enable" : "Disable", - usb3_lpm_names[state]); + str_enable_disable(enable), usb3_lpm_names[state]); return -EBUSY; } return 0; @@ -4166,9 +4234,9 @@ static int usb_set_lpm_timeout(struct usb_device *udev, } /* - * Don't allow device intiated U1/U2 if the system exit latency + one bus - * interval is greater than the minimum service interval of any active - * periodic endpoint. See USB 3.2 section 9.4.9 + * Don't allow device intiated U1/U2 if device isn't in the configured state, + * or the system exit latency + one bus interval is greater than the minimum + * service interval of any active periodic endpoint. See USB 3.2 section 9.4.9 */ static bool usb_device_may_initiate_lpm(struct usb_device *udev, enum usb3_link_state state) @@ -4176,7 +4244,7 @@ static bool usb_device_may_initiate_lpm(struct usb_device *udev, unsigned int sel; /* us */ int i, j; - if (!udev->lpm_devinit_allow) + if (!udev->lpm_devinit_allow || !udev->actconfig) return false; if (state == USB3_LPM_U1) @@ -4224,7 +4292,7 @@ static bool usb_device_may_initiate_lpm(struct usb_device *udev, * driver know about it. If that call fails, it should be harmless, and just * take up more slightly more bus bandwidth for unnecessary U1/U2 exit latency. */ -static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, +static int usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { int timeout; @@ -4233,7 +4301,7 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, /* Skip if the device BOS descriptor couldn't be read */ if (!udev->bos) - return; + return -EINVAL; u1_mel = udev->bos->ss_cap->bU1devExitLat; u2_mel = udev->bos->ss_cap->bU2DevExitLat; @@ -4244,7 +4312,7 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, */ if ((state == USB3_LPM_U1 && u1_mel == 0) || (state == USB3_LPM_U2 && u2_mel == 0)) - return; + return -EINVAL; /* We allow the host controller to set the U1/U2 timeout internally * first, so that it can change its schedule to account for the @@ -4255,13 +4323,13 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, /* xHCI host controller doesn't want to enable this LPM state. */ if (timeout == 0) - return; + return -EINVAL; if (timeout < 0) { dev_warn(&udev->dev, "Could not enable %s link state, " "xHCI error %i.\n", usb3_lpm_names[state], timeout); - return; + return timeout; } if (usb_set_lpm_timeout(udev, state, timeout)) { @@ -4270,29 +4338,15 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, * host know that this link state won't be enabled. */ hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); - return; - } - - /* Only a configured device will accept the Set Feature - * U1/U2_ENABLE - */ - if (udev->actconfig && - usb_device_may_initiate_lpm(udev, state)) { - if (usb_set_device_initiated_lpm(udev, state, true)) { - /* - * Request to enable device initiated U1/U2 failed, - * better to turn off lpm in this case. - */ - usb_set_lpm_timeout(udev, state, 0); - hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state); - return; - } + return -EBUSY; } if (state == USB3_LPM_U1) udev->usb3_lpm_u1_enabled = 1; else if (state == USB3_LPM_U2) udev->usb3_lpm_u2_enabled = 1; + + return 0; } /* * Disable the hub-initiated U1/U2 idle timeouts, and disable device-initiated @@ -4325,8 +4379,6 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, if (usb_set_lpm_timeout(udev, state, 0)) return -EBUSY; - usb_set_device_initiated_lpm(udev, state, false); - if (hcd->driver->disable_usb3_lpm_timeout(hcd, udev, state)) dev_warn(&udev->dev, "Could not disable xHCI %s timeout, " "bus schedule bandwidth may be impacted.\n", @@ -4356,6 +4408,7 @@ static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, int usb_disable_lpm(struct usb_device *udev) { struct usb_hcd *hcd; + int err; if (!udev || !udev->parent || udev->speed < USB_SPEED_SUPER || @@ -4373,14 +4426,19 @@ int usb_disable_lpm(struct usb_device *udev) /* If LPM is enabled, attempt to disable it. */ if (usb_disable_link_state(hcd, udev, USB3_LPM_U1)) - goto enable_lpm; + goto disable_failed; if (usb_disable_link_state(hcd, udev, USB3_LPM_U2)) - goto enable_lpm; + goto disable_failed; + + err = usb_set_device_initiated_lpm(udev, USB3_LPM_U1, false); + if (!err) + usb_set_device_initiated_lpm(udev, USB3_LPM_U2, false); return 0; -enable_lpm: - usb_enable_lpm(udev); +disable_failed: + udev->lpm_disable_count--; + return -EBUSY; } EXPORT_SYMBOL_GPL(usb_disable_lpm); @@ -4441,10 +4499,24 @@ void usb_enable_lpm(struct usb_device *udev) port_dev = hub->ports[udev->portnum - 1]; if (port_dev->usb3_lpm_u1_permit) - usb_enable_link_state(hcd, udev, USB3_LPM_U1); + if (usb_enable_link_state(hcd, udev, USB3_LPM_U1)) + return; if (port_dev->usb3_lpm_u2_permit) - usb_enable_link_state(hcd, udev, USB3_LPM_U2); + if (usb_enable_link_state(hcd, udev, USB3_LPM_U2)) + return; + + /* + * Enable device initiated U1/U2 with a SetFeature(U1/U2_ENABLE) request + * if system exit latency is short enough and device is configured + */ + if (usb_device_may_initiate_lpm(udev, USB3_LPM_U1)) { + if (usb_set_device_initiated_lpm(udev, USB3_LPM_U1, true)) + return; + + if (usb_device_may_initiate_lpm(udev, USB3_LPM_U2)) + usb_set_device_initiated_lpm(udev, USB3_LPM_U2, true); + } } EXPORT_SYMBOL_GPL(usb_enable_lpm); @@ -4640,9 +4712,6 @@ void usb_ep0_reinit(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_ep0_reinit); -#define usb_sndaddr0pipe() (PIPE_CONTROL << 30) -#define usb_rcvaddr0pipe() ((PIPE_CONTROL << 30) | USB_DIR_IN) - static int hub_set_address(struct usb_device *udev, int devnum) { int retval; @@ -4666,7 +4735,7 @@ static int hub_set_address(struct usb_device *udev, int devnum) if (hcd->driver->address_device) retval = hcd->driver->address_device(hcd, udev, timeout_ms); else - retval = usb_control_msg(udev, usb_sndaddr0pipe(), + retval = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_SET_ADDRESS, 0, devnum, 0, NULL, 0, timeout_ms); if (retval == 0) { @@ -4747,7 +4816,7 @@ static int get_bMaxPacketSize0(struct usb_device *udev, for (i = 0; i < GET_MAXPACKET0_TRIES; ++i) { /* Start with invalid values in case the transfer fails */ buf->bDescriptorType = buf->bMaxPacketSize0 = 0; - rc = usb_control_msg(udev, usb_rcvaddr0pipe(), + rc = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, USB_DT_DEVICE << 8, 0, buf, size, @@ -5054,9 +5123,10 @@ hub_port_init(struct usb_hub *hub, struct usb_device *udev, int port1, } if (usb_endpoint_maxp(&udev->ep0.desc) == i) { ; /* Initial ep0 maxpacket guess is right */ - } else if ((udev->speed == USB_SPEED_FULL || + } else if (((udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH) && - (i == 8 || i == 16 || i == 32 || i == 64)) { + (i == 8 || i == 16 || i == 32 || i == 64)) || + (udev->speed >= USB_SPEED_SUPER && i > 0)) { /* Initial guess is wrong; use the descriptor's value */ if (udev->speed == USB_SPEED_FULL) dev_dbg(&udev->dev, "ep0 maxpacket = %d\n", i); @@ -5887,7 +5957,7 @@ out_hdev_lock: /* Balance the stuff in kick_hub_wq() and allow autosuspend */ usb_autopm_put_interface(intf); - kref_put(&hub->kref, hub_release); + hub_put(hub); kcov_remote_stop(); } @@ -5998,6 +6068,36 @@ void usb_hub_cleanup(void) } /* usb_hub_cleanup() */ /** + * hub_hc_release_resources - clear resources used by host controller + * @udev: pointer to device being released + * + * Context: task context, might sleep + * + * Function releases the host controller resources in correct order before + * making any operation on resuming usb device. The host controller resources + * allocated for devices in tree should be released starting from the last + * usb device in tree toward the root hub. This function is used only during + * resuming device when usb device require reinitialization – that is, when + * flag udev->reset_resume is set. + * + * This call is synchronous, and may not be used in an interrupt context. + */ +static void hub_hc_release_resources(struct usb_device *udev) +{ + struct usb_hub *hub = usb_hub_to_struct_hub(udev); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + int i; + + /* Release up resources for all children before this device */ + for (i = 0; i < udev->maxchild; i++) + if (hub->ports[i]->child) + hub_hc_release_resources(hub->ports[i]->child); + + if (hcd->driver->reset_device) + hcd->driver->reset_device(hcd, udev); +} + +/** * usb_reset_and_verify_device - perform a USB port reset to reinitialize a device * @udev: device to reset (not in SUSPENDED or NOTATTACHED state) * @@ -6037,6 +6137,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) struct usb_hub *parent_hub; struct usb_hcd *hcd = bus_to_hcd(udev->bus); struct usb_device_descriptor descriptor; + struct usb_interface *intf; struct usb_host_bos *bos; int i, j, ret = 0; int port1 = udev->portnum; @@ -6061,6 +6162,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev) bos = udev->bos; udev->bos = NULL; + if (udev->reset_resume) + hub_hc_release_resources(udev); + mutex_lock(hcd->address0_mutex); for (i = 0; i < PORT_INIT_TRIES; ++i) { @@ -6091,6 +6195,18 @@ static int usb_reset_and_verify_device(struct usb_device *udev) if (!udev->actconfig) goto done; + /* + * Some devices can't handle setting default altsetting 0 with a + * Set-Interface request. Disable host-side endpoints of those + * interfaces here. Enable and reset them back after host has set + * its internal endpoint structures during usb_hcd_alloc_bandwith() + */ + for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { + intf = udev->actconfig->interface[i]; + if (intf->cur_altsetting->desc.bAlternateSetting == 0) + usb_disable_interface(udev, intf, true); + } + mutex_lock(hcd->bandwidth_mutex); ret = usb_hcd_alloc_bandwidth(udev, udev->actconfig, NULL, NULL); if (ret < 0) { @@ -6122,12 +6238,11 @@ static int usb_reset_and_verify_device(struct usb_device *udev) */ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { struct usb_host_config *config = udev->actconfig; - struct usb_interface *intf = config->interface[i]; struct usb_interface_descriptor *desc; + intf = config->interface[i]; desc = &intf->cur_altsetting->desc; if (desc->bAlternateSetting == 0) { - usb_disable_interface(udev, intf, true); usb_enable_interface(udev, intf, true); ret = 0; } else { diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h index 43ce21c96a51..e6ae73f8a95d 100644 --- a/drivers/usb/core/hub.h +++ b/drivers/usb/core/hub.h @@ -74,7 +74,7 @@ struct usb_hub { spinlock_t irq_urb_lock; struct timer_list irq_urb_retry; struct usb_port **ports; - struct list_head onboard_hub_devs; + struct list_head onboard_devs; }; /** @@ -129,6 +129,8 @@ extern void usb_hub_remove_port_device(struct usb_hub *hub, extern int usb_hub_set_port_power(struct usb_device *hdev, struct usb_hub *hub, int port1, bool set); extern struct usb_hub *usb_hub_to_struct_hub(struct usb_device *hdev); +extern void hub_get(struct usb_hub *hub); +extern void hub_put(struct usb_hub *hub); extern int hub_port_debounce(struct usb_hub *hub, int port1, bool must_be_connected); extern int usb_clear_port_feature(struct usb_device *hdev, diff --git a/drivers/usb/core/ledtrig-usbport.c b/drivers/usb/core/ledtrig-usbport.c index 85c999f71ad7..5e3c515991f3 100644 --- a/drivers/usb/core/ledtrig-usbport.c +++ b/drivers/usb/core/ledtrig-usbport.c @@ -10,6 +10,7 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/slab.h> +#include <linux/sysfs.h> #include <linux/usb.h> #include <linux/usb/of.h> @@ -87,7 +88,7 @@ static ssize_t usbport_trig_port_show(struct device *dev, struct usbport_trig_port, attr); - return sprintf(buf, "%d\n", port->observed) + 1; + return sysfs_emit(buf, "%d\n", port->observed) + 1; } static ssize_t usbport_trig_port_store(struct device *dev, diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 077dfe48d01c..d2b2787be409 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1198,6 +1198,8 @@ EXPORT_SYMBOL_GPL(usb_get_status); * same status code used to report a true stall. * * This call is synchronous, and may not be used in an interrupt context. + * If a thread in your driver uses this call, make sure your disconnect() + * method can wait for it to complete. * * Return: Zero on success, or else the status code returned by the * underlying usb_control_msg() call. @@ -1516,7 +1518,8 @@ void usb_enable_interface(struct usb_device *dev, * This call is synchronous, and may not be used in an interrupt context. * Also, drivers must not change altsettings while urbs are scheduled for * endpoints in that interface; all such urbs must first be completed - * (perhaps forced by unlinking). + * (perhaps forced by unlinking). If a thread in your driver uses this call, + * make sure your disconnect() method can wait for it to complete. * * Return: Zero on success, or else the status code returned by the * underlying usb_control_msg() call. @@ -1849,7 +1852,7 @@ static int usb_if_uevent(const struct device *dev, struct kobj_uevent_env *env) return 0; } -struct device_type usb_if_device_type = { +const struct device_type usb_if_device_type = { .name = "usb_interface", .release = usb_release_interface, .uevent = usb_if_uevent, diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c index db4ccf9ce3d9..763e4122ed5b 100644 --- a/drivers/usb/core/of.c +++ b/drivers/usb/core/of.c @@ -8,6 +8,7 @@ */ #include <linux/of.h> +#include <linux/of_graph.h> #include <linux/usb/of.h> /** @@ -75,6 +76,79 @@ bool usb_of_has_combined_node(struct usb_device *udev) } EXPORT_SYMBOL_GPL(usb_of_has_combined_node); +static bool usb_of_has_devices_or_graph(const struct usb_device *hub) +{ + const struct device_node *np = hub->dev.of_node; + struct device_node *child; + + if (of_graph_is_present(np)) + return true; + + for_each_child_of_node(np, child) { + if (of_property_present(child, "reg")) { + of_node_put(child); + return true; + } + } + + return false; +} + +/** + * usb_of_get_connect_type() - get a USB hub's port connect_type + * @hub: hub to which port is for @port1 + * @port1: one-based index of port + * + * Get the connect_type of @port1 based on the device node for @hub. If the + * port is described in the OF graph, the connect_type is "hotplug". If the + * @hub has a child device has with a 'reg' property equal to @port1 the + * connect_type is "hard-wired". If there isn't an OF graph or child node at + * all then the connect_type is "unknown". Otherwise, the port is considered + * "unused" because it isn't described at all. + * + * Return: A connect_type for @port1 based on the device node for @hub. + */ +enum usb_port_connect_type usb_of_get_connect_type(struct usb_device *hub, int port1) +{ + struct device_node *np, *child, *ep, *remote_np; + enum usb_port_connect_type connect_type; + + /* Only set connect_type if binding has ports/hardwired devices. */ + if (!usb_of_has_devices_or_graph(hub)) + return USB_PORT_CONNECT_TYPE_UNKNOWN; + + /* Assume port is unused if there's a graph or a child node. */ + connect_type = USB_PORT_NOT_USED; + + np = hub->dev.of_node; + /* + * Hotplug ports are connected to an available remote node, e.g. + * usb-a-connector compatible node, in the OF graph. + */ + if (of_graph_is_present(np)) { + ep = of_graph_get_endpoint_by_regs(np, port1, -1); + if (ep) { + remote_np = of_graph_get_remote_port_parent(ep); + of_node_put(ep); + if (of_device_is_available(remote_np)) + connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG; + of_node_put(remote_np); + } + } + + /* + * Hard-wired ports are child nodes with a reg property corresponding + * to the port number, i.e. a usb device. + */ + child = usb_of_get_device_node(hub, port1); + if (of_device_is_available(child)) + connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED; + of_node_put(child); + + return connect_type; +} +EXPORT_SYMBOL_GPL(usb_of_get_connect_type); + /** * usb_of_get_interface_node() - get a USB interface node * @udev: USB device of interface diff --git a/drivers/usb/core/phy.c b/drivers/usb/core/phy.c index fb1588e7c282..faa20054ad5a 100644 --- a/drivers/usb/core/phy.c +++ b/drivers/usb/core/phy.c @@ -19,6 +19,30 @@ struct usb_phy_roothub { struct list_head list; }; +/* Allocate the roothub_entry by specific name of phy */ +static int usb_phy_roothub_add_phy_by_name(struct device *dev, const char *name, + struct list_head *list) +{ + struct usb_phy_roothub *roothub_entry; + struct phy *phy; + + phy = devm_of_phy_get(dev, dev->of_node, name); + if (IS_ERR(phy)) + return PTR_ERR(phy); + + roothub_entry = devm_kzalloc(dev, sizeof(*roothub_entry), GFP_KERNEL); + if (!roothub_entry) + return -ENOMEM; + + INIT_LIST_HEAD(&roothub_entry->list); + + roothub_entry->phy = phy; + + list_add_tail(&roothub_entry->list, list); + + return 0; +} + static int usb_phy_roothub_add_phy(struct device *dev, int index, struct list_head *list) { @@ -65,6 +89,9 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) INIT_LIST_HEAD(&phy_roothub->list); + if (!usb_phy_roothub_add_phy_by_name(dev, "usb2-phy", &phy_roothub->list)) + return phy_roothub; + for (i = 0; i < num_phys; i++) { err = usb_phy_roothub_add_phy(dev, i, &phy_roothub->list); if (err) @@ -75,6 +102,41 @@ struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev) } EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc); +/** + * usb_phy_roothub_alloc_usb3_phy - alloc the roothub + * @dev: the device of the host controller + * + * Allocate the usb phy roothub if the host use a generic usb3-phy. + * + * Return: On success, a pointer to the usb_phy_roothub. Otherwise, + * %NULL if no use usb3 phy or %-ENOMEM if out of memory. + */ +struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device *dev) +{ + struct usb_phy_roothub *phy_roothub; + int num_phys; + + if (!IS_ENABLED(CONFIG_GENERIC_PHY)) + return NULL; + + num_phys = of_count_phandle_with_args(dev->of_node, "phys", + "#phy-cells"); + if (num_phys <= 0) + return NULL; + + phy_roothub = devm_kzalloc(dev, sizeof(*phy_roothub), GFP_KERNEL); + if (!phy_roothub) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&phy_roothub->list); + + if (!usb_phy_roothub_add_phy_by_name(dev, "usb3-phy", &phy_roothub->list)) + return phy_roothub; + + return NULL; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_alloc_usb3_phy); + int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub) { struct usb_phy_roothub *roothub_entry; @@ -172,6 +234,64 @@ int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub) } EXPORT_SYMBOL_GPL(usb_phy_roothub_calibrate); +/** + * usb_phy_roothub_notify_connect() - connect notification + * @phy_roothub: the phy of roothub, if the host use a generic phy. + * @port: the port index for connect + * + * If the phy needs to get connection status, the callback can be used. + * Returns: %0 if successful, a negative error code otherwise + */ +int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, int port) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_notify_connect(roothub_entry->phy, port); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_connect); + +/** + * usb_phy_roothub_notify_disconnect() - disconnect notification + * @phy_roothub: the phy of roothub, if the host use a generic phy. + * @port: the port index for disconnect + * + * If the phy needs to get connection status, the callback can be used. + * Returns: %0 if successful, a negative error code otherwise + */ +int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub *phy_roothub, int port) +{ + struct usb_phy_roothub *roothub_entry; + struct list_head *head; + int err; + + if (!phy_roothub) + return 0; + + head = &phy_roothub->list; + + list_for_each_entry(roothub_entry, head, list) { + err = phy_notify_disconnect(roothub_entry->phy, port); + if (err) + return err; + } + + return 0; +} +EXPORT_SYMBOL_GPL(usb_phy_roothub_notify_disconnect); + int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub) { struct usb_phy_roothub *roothub_entry; diff --git a/drivers/usb/core/phy.h b/drivers/usb/core/phy.h index 20a267cd986b..88b49c0ea6b5 100644 --- a/drivers/usb/core/phy.h +++ b/drivers/usb/core/phy.h @@ -12,6 +12,7 @@ struct device; struct usb_phy_roothub; struct usb_phy_roothub *usb_phy_roothub_alloc(struct device *dev); +struct usb_phy_roothub *usb_phy_roothub_alloc_usb3_phy(struct device *dev); int usb_phy_roothub_init(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); @@ -19,6 +20,8 @@ int usb_phy_roothub_exit(struct usb_phy_roothub *phy_roothub); int usb_phy_roothub_set_mode(struct usb_phy_roothub *phy_roothub, enum phy_mode mode); int usb_phy_roothub_calibrate(struct usb_phy_roothub *phy_roothub); +int usb_phy_roothub_notify_connect(struct usb_phy_roothub *phy_roothub, int port); +int usb_phy_roothub_notify_disconnect(struct usb_phy_roothub *phy_roothub, int port); int usb_phy_roothub_power_on(struct usb_phy_roothub *phy_roothub); void usb_phy_roothub_power_off(struct usb_phy_roothub *phy_roothub); diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c index c628c1abc907..f54198171b6a 100644 --- a/drivers/usb/core/port.c +++ b/drivers/usb/core/port.c @@ -9,8 +9,11 @@ #include <linux/kstrtox.h> #include <linux/slab.h> +#include <linux/string_choices.h> +#include <linux/sysfs.h> #include <linux/pm_qos.h> #include <linux/component.h> +#include <linux/usb/of.h> #include "hub.h" @@ -23,7 +26,7 @@ static ssize_t early_stop_show(struct device *dev, { struct usb_port *port_dev = to_usb_port(dev); - return sysfs_emit(buf, "%s\n", port_dev->early_stop ? "yes" : "no"); + return sysfs_emit(buf, "%s\n", str_yes_no(port_dev->early_stop)); } static ssize_t early_stop_store(struct device *dev, struct device_attribute *attr, @@ -50,16 +53,29 @@ static ssize_t disable_show(struct device *dev, struct usb_port *port_dev = to_usb_port(dev); struct usb_device *hdev = to_usb_device(dev->parent->parent); struct usb_hub *hub = usb_hub_to_struct_hub(hdev); - struct usb_interface *intf = to_usb_interface(hub->intfdev); + struct usb_interface *intf = to_usb_interface(dev->parent); int port1 = port_dev->portnum; u16 portstatus, unused; bool disabled; int rc; + struct kernfs_node *kn; + if (!hub) + return -ENODEV; + hub_get(hub); rc = usb_autopm_get_interface(intf); if (rc < 0) - return rc; + goto out_hub_get; + /* + * Prevent deadlock if another process is concurrently + * trying to unregister hdev. + */ + kn = sysfs_break_active_protection(&dev->kobj, &attr->attr); + if (!kn) { + rc = -ENODEV; + goto out_autopm; + } usb_lock_device(hdev); if (hub->disconnected) { rc = -ENODEV; @@ -69,9 +85,13 @@ static ssize_t disable_show(struct device *dev, usb_hub_port_status(hub, port1, &portstatus, &unused); disabled = !usb_port_is_power_on(hub, portstatus); -out_hdev_lock: + out_hdev_lock: usb_unlock_device(hdev); + sysfs_unbreak_active_protection(kn); + out_autopm: usb_autopm_put_interface(intf); + out_hub_get: + hub_put(hub); if (rc) return rc; @@ -85,19 +105,32 @@ static ssize_t disable_store(struct device *dev, struct device_attribute *attr, struct usb_port *port_dev = to_usb_port(dev); struct usb_device *hdev = to_usb_device(dev->parent->parent); struct usb_hub *hub = usb_hub_to_struct_hub(hdev); - struct usb_interface *intf = to_usb_interface(hub->intfdev); + struct usb_interface *intf = to_usb_interface(dev->parent); int port1 = port_dev->portnum; bool disabled; int rc; + struct kernfs_node *kn; + if (!hub) + return -ENODEV; rc = kstrtobool(buf, &disabled); if (rc) return rc; + hub_get(hub); rc = usb_autopm_get_interface(intf); if (rc < 0) - return rc; + goto out_hub_get; + /* + * Prevent deadlock if another process is concurrently + * trying to unregister hdev. + */ + kn = sysfs_break_active_protection(&dev->kobj, &attr->attr); + if (!kn) { + rc = -ENODEV; + goto out_autopm; + } usb_lock_device(hdev); if (hub->disconnected) { rc = -ENODEV; @@ -118,9 +151,13 @@ static ssize_t disable_store(struct device *dev, struct device_attribute *attr, if (!rc) rc = count; -out_hdev_lock: + out_hdev_lock: usb_unlock_device(hdev); + sysfs_unbreak_active_protection(kn); + out_autopm: usb_autopm_put_interface(intf); + out_hub_get: + hub_put(hub); return rc; } @@ -131,7 +168,7 @@ static ssize_t location_show(struct device *dev, { struct usb_port *port_dev = to_usb_port(dev); - return sprintf(buf, "0x%08x\n", port_dev->location); + return sysfs_emit(buf, "0x%08x\n", port_dev->location); } static DEVICE_ATTR_RO(location); @@ -156,7 +193,7 @@ static ssize_t connect_type_show(struct device *dev, break; } - return sprintf(buf, "%s\n", result); + return sysfs_emit(buf, "%s\n", result); } static DEVICE_ATTR_RO(connect_type); @@ -175,7 +212,7 @@ static ssize_t over_current_count_show(struct device *dev, { struct usb_port *port_dev = to_usb_port(dev); - return sprintf(buf, "%u\n", port_dev->over_current_count); + return sysfs_emit(buf, "%u\n", port_dev->over_current_count); } static DEVICE_ATTR_RO(over_current_count); @@ -184,7 +221,7 @@ static ssize_t quirks_show(struct device *dev, { struct usb_port *port_dev = to_usb_port(dev); - return sprintf(buf, "%08x\n", port_dev->quirks); + return sysfs_emit(buf, "%08x\n", port_dev->quirks); } static ssize_t quirks_store(struct device *dev, struct device_attribute *attr, @@ -219,7 +256,7 @@ static ssize_t usb3_lpm_permit_show(struct device *dev, p = "0"; } - return sprintf(buf, "%s\n", p); + return sysfs_emit(buf, "%s\n", p); } static ssize_t usb3_lpm_permit_store(struct device *dev, @@ -417,9 +454,12 @@ static int usb_port_runtime_suspend(struct device *dev) static void usb_port_shutdown(struct device *dev) { struct usb_port *port_dev = to_usb_port(dev); + struct usb_device *udev = port_dev->child; - if (port_dev->child) - usb_disable_usb2_hardware_lpm(port_dev->child); + if (udev && !udev->port_is_suspended) { + usb_disable_usb2_hardware_lpm(udev); + usb_unlocked_disable_lpm(udev); + } } static const struct dev_pm_ops usb_port_pm_ops = { @@ -429,7 +469,7 @@ static const struct dev_pm_ops usb_port_pm_ops = { #endif }; -struct device_type usb_port_device_type = { +const struct device_type usb_port_device_type = { .name = "usb_port", .release = usb_port_device_release, .pm = &usb_port_pm_ops, @@ -573,7 +613,7 @@ static int match_location(struct usb_device *peer_hdev, void *p) struct usb_hub *peer_hub = usb_hub_to_struct_hub(peer_hdev); struct usb_device *hdev = to_usb_device(port_dev->dev.parent->parent); - if (!peer_hub) + if (!peer_hub || port_dev->connect_type == USB_PORT_NOT_USED) return 0; hcd = bus_to_hcd(hdev->bus); @@ -584,7 +624,8 @@ static int match_location(struct usb_device *peer_hdev, void *p) for (port1 = 1; port1 <= peer_hdev->maxchild; port1++) { peer = peer_hub->ports[port1 - 1]; - if (peer && peer->location == port_dev->location) { + if (peer && peer->connect_type != USB_PORT_NOT_USED && + peer->location == port_dev->location) { link_peers_report(port_dev, peer); return 1; /* done */ } @@ -708,6 +749,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1) return -ENOMEM; } + port_dev->connect_type = usb_of_get_connect_type(hdev, port1); hub->ports[port1 - 1] = port_dev; port_dev->portnum = port1; set_bit(port1, hub->power_bits); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index b4783574b8e6..53d68d20fb62 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -341,6 +341,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0638, 0x0a13), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* Prolific Single-LUN Mass Storage Card Reader */ + { USB_DEVICE(0x067b, 0x2731), .driver_info = USB_QUIRK_DELAY_INIT | + USB_QUIRK_NO_LPM }, + /* Saitek Cyborg Gold Joystick */ { USB_DEVICE(0x06a3, 0x0006), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, @@ -365,6 +369,12 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0781, 0x5583), .driver_info = USB_QUIRK_NO_LPM }, { USB_DEVICE(0x0781, 0x5591), .driver_info = USB_QUIRK_NO_LPM }, + /* SanDisk Corp. SanDisk 3.2Gen1 */ + { USB_DEVICE(0x0781, 0x55a3), .driver_info = USB_QUIRK_DELAY_INIT }, + + /* SanDisk Extreme 55AE */ + { USB_DEVICE(0x0781, 0x55ae), .driver_info = USB_QUIRK_NO_LPM }, + /* Realforce 87U Keyboard */ { USB_DEVICE(0x0853, 0x011b), .driver_info = USB_QUIRK_NO_LPM }, @@ -379,6 +389,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0904, 0x6103), .driver_info = USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL }, + /* Silicon Motion Flash Drive */ + { USB_DEVICE(0x090c, 0x1000), .driver_info = USB_QUIRK_DELAY_INIT }, + /* Sound Devices USBPre2 */ { USB_DEVICE(0x0926, 0x0202), .driver_info = USB_QUIRK_ENDPOINT_IGNORE }, @@ -394,6 +407,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Kingston DataTraveler 3.0 */ { USB_DEVICE(0x0951, 0x1666), .driver_info = USB_QUIRK_NO_LPM }, + /* TOSHIBA TransMemory-Mx */ + { USB_DEVICE(0x0930, 0x1408), .driver_info = USB_QUIRK_NO_LPM }, + /* NVIDIA Jetson devices in Force Recovery mode */ { USB_DEVICE(0x0955, 0x7018), .driver_info = USB_QUIRK_RESET_RESUME }, { USB_DEVICE(0x0955, 0x7019), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -432,6 +448,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0c45, 0x7056), .driver_info = USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Sony Xperia XZ1 Compact (lilac) smartphone in fastboot mode */ + { USB_DEVICE(0x0fce, 0x0dde), .driver_info = USB_QUIRK_NO_LPM }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -506,6 +525,9 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1b1c, 0x1b38), .driver_info = USB_QUIRK_DELAY_INIT | USB_QUIRK_DELAY_CTRL_MSG }, + /* START BP-850k Printer */ + { USB_DEVICE(0x1bc3, 0x0003), .driver_info = USB_QUIRK_NO_SET_INTF }, + /* MIDI keyboard WORLDE MINI */ { USB_DEVICE(0x1c75, 0x0204), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, @@ -519,10 +541,16 @@ static const struct usb_device_id usb_quirk_list[] = { /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + /* Teclast disk */ + { USB_DEVICE(0x1f75, 0x0917), .driver_info = USB_QUIRK_NO_LPM }, + /* Hauppauge HVR-950q */ { USB_DEVICE(0x2040, 0x7200), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* VLI disk */ + { USB_DEVICE(0x2109, 0x0711), .driver_info = USB_QUIRK_NO_LPM }, + /* Raydium Touchscreen */ { USB_DEVICE(0x2386, 0x3114), .driver_info = USB_QUIRK_NO_LPM }, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 5d21718afb05..23f3cb1989f4 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -273,9 +273,10 @@ static ssize_t avoid_reset_quirk_store(struct device *dev, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - int val, rc; + bool val; + int rc; - if (sscanf(buf, "%d", &val) != 1 || val < 0 || val > 1) + if (kstrtobool(buf, &val) != 0) return -EINVAL; rc = usb_lock_device_interruptible(udev); if (rc < 0) @@ -322,13 +323,14 @@ static ssize_t persist_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { struct usb_device *udev = to_usb_device(dev); - int value, rc; + bool value; + int rc; /* Hubs are always enabled for USB_PERSIST */ if (udev->descriptor.bDeviceClass == USB_CLASS_HUB) return -EPERM; - if (sscanf(buf, "%d", &value) != 1) + if (kstrtobool(buf, &value) != 0) return -EINVAL; rc = usb_lock_device_interruptible(udev); @@ -668,6 +670,7 @@ static int add_power_attributes(struct device *dev) static void remove_power_attributes(struct device *dev) { + sysfs_unmerge_group(&dev->kobj, &usb3_hardware_lpm_attr_group); sysfs_unmerge_group(&dev->kobj, &usb2_hardware_lpm_attr_group); sysfs_unmerge_group(&dev->kobj, &power_attr_group); } @@ -739,14 +742,14 @@ static ssize_t authorized_store(struct device *dev, { ssize_t result; struct usb_device *usb_dev = to_usb_device(dev); - unsigned val; - result = sscanf(buf, "%u\n", &val); - if (result != 1) + bool val; + + if (kstrtobool(buf, &val) != 0) result = -EINVAL; - else if (val == 0) - result = usb_deauthorize_device(usb_dev); - else + else if (val) result = usb_authorize_device(usb_dev); + else + result = usb_deauthorize_device(usb_dev); return result < 0 ? result : size; } static DEVICE_ATTR_IGNORE_LOCKDEP(authorized, S_IRUGO | S_IWUSR, @@ -847,17 +850,11 @@ static const struct attribute_group dev_string_attr_grp = { .is_visible = dev_string_attrs_are_visible, }; -const struct attribute_group *usb_device_groups[] = { - &dev_attr_grp, - &dev_string_attr_grp, - NULL -}; - /* Binary descriptors */ static ssize_t -read_descriptors(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, +descriptors_read(struct file *filp, struct kobject *kobj, + const struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct device *dev = kobj_to_dev(kobj); @@ -878,7 +875,7 @@ read_descriptors(struct file *filp, struct kobject *kobj, srclen = sizeof(struct usb_device_descriptor); } else { src = udev->rawdescriptors[cfgno]; - srclen = __le16_to_cpu(udev->config[cfgno].desc. + srclen = le16_to_cpu(udev->config[cfgno].desc. wTotalLength); } if (off < srclen) { @@ -893,11 +890,69 @@ read_descriptors(struct file *filp, struct kobject *kobj, } return count - nleft; } +static const BIN_ATTR_RO(descriptors, 18 + 65535); /* dev descr + max-size raw descriptor */ + +static ssize_t +bos_descriptors_read(struct file *filp, struct kobject *kobj, + const struct bin_attribute *attr, + char *buf, loff_t off, size_t count) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_device *udev = to_usb_device(dev); + struct usb_host_bos *bos = udev->bos; + struct usb_bos_descriptor *desc; + size_t desclen, n = 0; + + if (bos) { + desc = bos->desc; + desclen = le16_to_cpu(desc->wTotalLength); + if (off < desclen) { + n = min(count, desclen - (size_t) off); + memcpy(buf, (void *) desc + off, n); + } + } + return n; +} +static const BIN_ATTR_RO(bos_descriptors, 65535); /* max-size BOS */ -static struct bin_attribute dev_bin_attr_descriptors = { - .attr = {.name = "descriptors", .mode = 0444}, - .read = read_descriptors, - .size = 18 + 65535, /* dev descr + max-size raw descriptor */ +/* When modifying this list, be sure to modify dev_bin_attrs_are_visible() + * accordingly. + */ +static const struct bin_attribute *const dev_bin_attrs[] = { + &bin_attr_descriptors, + &bin_attr_bos_descriptors, + NULL +}; + +static umode_t dev_bin_attrs_are_visible(struct kobject *kobj, + const struct bin_attribute *a, int n) +{ + struct device *dev = kobj_to_dev(kobj); + struct usb_device *udev = to_usb_device(dev); + + /* + * There's no need to check if the descriptors attribute should + * be visible because all devices have a device descriptor. The + * bos_descriptors attribute should be visible if and only if + * the device has a BOS, so check if it exists here. + */ + if (a == &bin_attr_bos_descriptors) { + if (udev->bos == NULL) + return 0; + } + return a->attr.mode; +} + +static const struct attribute_group dev_bin_attr_grp = { + .bin_attrs_new = dev_bin_attrs, + .is_bin_visible = dev_bin_attrs_are_visible, +}; + +const struct attribute_group *usb_device_groups[] = { + &dev_attr_grp, + &dev_string_attr_grp, + &dev_bin_attr_grp, + NULL }; /* @@ -1015,10 +1070,6 @@ int usb_create_sysfs_dev_files(struct usb_device *udev) struct device *dev = &udev->dev; int retval; - retval = device_create_bin_file(dev, &dev_bin_attr_descriptors); - if (retval) - goto error; - retval = add_persist_attributes(dev); if (retval) goto error; @@ -1048,7 +1099,6 @@ void usb_remove_sysfs_dev_files(struct usb_device *udev) remove_power_attributes(dev); remove_persist_attributes(dev); - device_remove_bin_file(dev, &dev_bin_attr_descriptors); } /* Interface Association Descriptor fields */ @@ -1168,14 +1218,24 @@ static ssize_t interface_authorized_store(struct device *dev, { struct usb_interface *intf = to_usb_interface(dev); bool val; + struct kernfs_node *kn; if (kstrtobool(buf, &val) != 0) return -EINVAL; - if (val) + if (val) { usb_authorize_interface(intf); - else - usb_deauthorize_interface(intf); + } else { + /* + * Prevent deadlock if another process is concurrently + * trying to unregister intf. + */ + kn = sysfs_break_active_protection(&dev->kobj, &attr->attr); + if (kn) { + usb_deauthorize_interface(intf); + sysfs_unbreak_active_protection(kn); + } + } return count; } diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7576920e2d5a..5e52a35486af 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -376,7 +376,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (!urb || !urb->complete) return -EINVAL; if (urb->hcpriv) { - WARN_ONCE(1, "URB %pK submitted while active\n", urb); + WARN_ONCE(1, "URB %p submitted while active\n", urb); return -EBUSY; } diff --git a/drivers/usb/core/usb-acpi.c b/drivers/usb/core/usb-acpi.c index a34b22537d7c..ea1ce8beb0cb 100644 --- a/drivers/usb/core/usb-acpi.c +++ b/drivers/usb/core/usb-acpi.c @@ -142,12 +142,68 @@ int usb_acpi_set_power_state(struct usb_device *hdev, int index, bool enable) } EXPORT_SYMBOL_GPL(usb_acpi_set_power_state); -static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle, - struct acpi_pld_info *pld) +/** + * usb_acpi_add_usb4_devlink - add device link to USB4 Host Interface for tunneled USB3 devices + * + * @udev: Tunneled USB3 device connected to a roothub. + * + * Adds a device link between a tunneled USB3 device and the USB4 Host Interface + * device to ensure correct runtime PM suspend and resume order. This function + * should only be called for tunneled USB3 devices. + * The USB4 Host Interface this tunneled device depends on is found from the roothub + * port ACPI device specific data _DSD entry. + * + * Return: negative error code on failure, 0 otherwise + */ +static int usb_acpi_add_usb4_devlink(struct usb_device *udev) +{ + const struct device_link *link; + struct usb_port *port_dev; + struct usb_hub *hub; + + if (!udev->parent || udev->parent->parent) + return 0; + + hub = usb_hub_to_struct_hub(udev->parent); + if (!hub) + return 0; + port_dev = hub->ports[udev->portnum - 1]; + + struct fwnode_handle *nhi_fwnode __free(fwnode_handle) = + fwnode_find_reference(dev_fwnode(&port_dev->dev), "usb4-host-interface", 0); + + if (IS_ERR(nhi_fwnode) || !nhi_fwnode->dev) + return 0; + + link = device_link_add(&port_dev->child->dev, nhi_fwnode->dev, + DL_FLAG_STATELESS | + DL_FLAG_RPM_ACTIVE | + DL_FLAG_PM_RUNTIME); + if (!link) { + dev_err(&port_dev->dev, "Failed to created device link from %s to %s\n", + dev_name(&port_dev->child->dev), dev_name(nhi_fwnode->dev)); + return -EINVAL; + } + + dev_dbg(&port_dev->dev, "Created device link from %s to %s\n", + dev_name(&port_dev->child->dev), dev_name(nhi_fwnode->dev)); + + return 0; +} + +/* + * Private to usb-acpi, all the core needs to know is that + * port_dev->location is non-zero when it has been set by the firmware. + */ +#define USB_ACPI_LOCATION_VALID (1 << 31) + +static void +usb_acpi_get_connect_type(struct usb_port *port_dev, acpi_handle *handle) { enum usb_port_connect_type connect_type = USB_PORT_CONNECT_TYPE_UNKNOWN; struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; union acpi_object *upc = NULL; + struct acpi_pld_info *pld = NULL; acpi_status status; /* @@ -158,6 +214,11 @@ static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle, * a usb device is directly hard-wired to the port. If no visible and * no connectable, the port would be not used. */ + + if (acpi_get_physical_device_location(handle, &pld) && pld) + port_dev->location = USB_ACPI_LOCATION_VALID | + pld->group_token << 8 | pld->group_position; + status = acpi_evaluate_object(handle, "_UPC", NULL, &buffer); if (ACPI_FAILURE(status)) goto out; @@ -166,25 +227,22 @@ static enum usb_port_connect_type usb_acpi_get_connect_type(acpi_handle handle, if (!upc || (upc->type != ACPI_TYPE_PACKAGE) || upc->package.count != 4) goto out; + /* UPC states port is connectable */ if (upc->package.elements[0].integer.value) - if (pld->user_visible) + if (!pld) + ; /* keep connect_type as unknown */ + else if (pld->user_visible) connect_type = USB_PORT_CONNECT_TYPE_HOT_PLUG; else connect_type = USB_PORT_CONNECT_TYPE_HARD_WIRED; - else if (!pld->user_visible) + else connect_type = USB_PORT_NOT_USED; out: + port_dev->connect_type = connect_type; kfree(upc); - return connect_type; + ACPI_FREE(pld); } - -/* - * Private to usb-acpi, all the core needs to know is that - * port_dev->location is non-zero when it has been set by the firmware. - */ -#define USB_ACPI_LOCATION_VALID (1 << 31) - static struct acpi_device * usb_acpi_get_companion_for_port(struct usb_port *port_dev) { @@ -222,22 +280,12 @@ static struct acpi_device * usb_acpi_find_companion_for_port(struct usb_port *port_dev) { struct acpi_device *adev; - struct acpi_pld_info *pld; - acpi_handle *handle; - acpi_status status; adev = usb_acpi_get_companion_for_port(port_dev); if (!adev) return NULL; - handle = adev->handle; - status = acpi_get_physical_device_location(handle, &pld); - if (ACPI_SUCCESS(status) && pld) { - port_dev->location = USB_ACPI_LOCATION_VALID - | pld->group_token << 8 | pld->group_position; - port_dev->connect_type = usb_acpi_get_connect_type(handle, pld); - ACPI_FREE(pld); - } + usb_acpi_get_connect_type(port_dev, adev->handle); return adev; } @@ -262,6 +310,12 @@ usb_acpi_find_companion_for_device(struct usb_device *udev) if (!hub) return NULL; + + /* Tunneled USB3 devices depend on USB4 Host Interface, set device link to it */ + if (udev->speed >= USB_SPEED_SUPER && + udev->tunnel_mode != USB_LINK_NATIVE) + usb_acpi_add_usb4_devlink(udev); + /* * This is an embedded USB device connected to a port and such * devices share port's ACPI companion. diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index dc8d9228a5e7..118fa4c93a79 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -592,7 +592,7 @@ static char *usb_devnode(const struct device *dev, usb_dev->bus->busnum, usb_dev->devnum); } -struct device_type usb_device_type = { +const struct device_type usb_device_type = { .name = "usb_device", .release = usb_release_dev, .uevent = usb_dev_uevent, @@ -695,15 +695,16 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, device_set_of_node_from_dev(&dev->dev, bus->sysdev); dev_set_name(&dev->dev, "usb%d", bus->busnum); } else { + int n; + /* match any labeling on the hubs; it's one-based */ if (parent->devpath[0] == '0') { - snprintf(dev->devpath, sizeof dev->devpath, - "%d", port1); + n = snprintf(dev->devpath, sizeof(dev->devpath), "%d", port1); /* Root ports are not counted in route string */ dev->route = 0; } else { - snprintf(dev->devpath, sizeof dev->devpath, - "%s.%d", parent->devpath, port1); + n = snprintf(dev->devpath, sizeof(dev->devpath), "%s.%d", + parent->devpath, port1); /* Route string assumes hubs have less than 16 ports */ if (port1 < 15) dev->route = parent->route + @@ -712,6 +713,11 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, dev->route = parent->route + (15 << ((parent->level - 1)*4)); } + if (n >= sizeof(dev->devpath)) { + usb_put_hcd(bus_to_hcd(bus)); + usb_put_dev(dev); + return NULL; + } dev->dev.parent = &parent->dev; dev_set_name(&dev->dev, "%d-%s", bus->busnum, dev->devpath); @@ -1150,4 +1156,5 @@ static void __exit usb_exit(void) subsys_initcall(usb_init); module_exit(usb_exit); +MODULE_DESCRIPTION("USB core host-side support"); MODULE_LICENSE("GPL"); diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index bfecb50773b6..a9b37aeb515b 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -75,7 +75,7 @@ extern int usb_match_device(struct usb_device *dev, extern const struct usb_device_id *usb_device_match_id(struct usb_device *udev, const struct usb_device_id *id); extern bool usb_driver_applicable(struct usb_device *udev, - struct usb_device_driver *udrv); + const struct usb_device_driver *udrv); extern void usb_forced_unbind_intf(struct usb_interface *intf); extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev); @@ -144,10 +144,10 @@ static inline int usb_disable_usb2_hardware_lpm(struct usb_device *udev) extern const struct class usbmisc_class; extern const struct bus_type usb_bus_type; extern struct mutex usb_port_peer_mutex; -extern struct device_type usb_device_type; -extern struct device_type usb_if_device_type; -extern struct device_type usb_ep_device_type; -extern struct device_type usb_port_device_type; +extern const struct device_type usb_device_type; +extern const struct device_type usb_if_device_type; +extern const struct device_type usb_ep_device_type; +extern const struct device_type usb_port_device_type; extern struct usb_device_driver usb_generic_driver; static inline int is_usb_device(const struct device *dev) |