summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc2/core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc2/core.c')
-rw-r--r--drivers/usb/dwc2/core.c199
1 files changed, 199 insertions, 0 deletions
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
index 55d5ae2a7ec7..8b499d643461 100644
--- a/drivers/usb/dwc2/core.c
+++ b/drivers/usb/dwc2/core.c
@@ -1020,6 +1020,205 @@ int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
return -ETIMEDOUT;
}
+/*
+ * Initializes the FSLSPClkSel field of the HCFG register depending on the
+ * PHY type
+ */
+void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
+{
+ u32 hcfg, val;
+
+ if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+ hsotg->params.ulpi_fs_ls) ||
+ hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+ /* Full speed PHY */
+ val = HCFG_FSLSPCLKSEL_48_MHZ;
+ } else {
+ /* High speed PHY running at full speed or high speed */
+ val = HCFG_FSLSPCLKSEL_30_60_MHZ;
+ }
+
+ dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
+ hcfg = dwc2_readl(hsotg, HCFG);
+ hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+ hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
+ dwc2_writel(hsotg, hcfg, HCFG);
+}
+
+static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg, ggpio, i2cctl;
+ int retval = 0;
+
+ /*
+ * core_init() is now called on every switch so only call the
+ * following for the first time through
+ */
+ if (select_phy) {
+ dev_dbg(hsotg->dev, "FS PHY selected\n");
+
+ usbcfg = dwc2_readl(hsotg, GUSBCFG);
+ if (!(usbcfg & GUSBCFG_PHYSEL)) {
+ usbcfg |= GUSBCFG_PHYSEL;
+ dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+ /* Reset after a PHY select */
+ retval = dwc2_core_reset(hsotg, false);
+
+ if (retval) {
+ dev_err(hsotg->dev,
+ "%s: Reset failed, aborting", __func__);
+ return retval;
+ }
+ }
+
+ if (hsotg->params.activate_stm_fs_transceiver) {
+ ggpio = dwc2_readl(hsotg, GGPIO);
+ if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
+ dev_dbg(hsotg->dev, "Activating transceiver\n");
+ /*
+ * STM32F4x9 uses the GGPIO register as general
+ * core configuration register.
+ */
+ ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
+ dwc2_writel(hsotg, ggpio, GGPIO);
+ }
+ }
+ }
+
+ /*
+ * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
+ * do this on HNP Dev/Host mode switches (done in dev_init and
+ * host_init).
+ */
+ if (dwc2_is_host_mode(hsotg))
+ dwc2_init_fs_ls_pclk_sel(hsotg);
+
+ if (hsotg->params.i2c_enable) {
+ dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");
+
+ /* Program GUSBCFG.OtgUtmiFsSel to I2C */
+ usbcfg = dwc2_readl(hsotg, GUSBCFG);
+ usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
+ dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+ /* Program GI2CCTL.I2CEn */
+ i2cctl = dwc2_readl(hsotg, GI2CCTL);
+ i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
+ i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
+ i2cctl &= ~GI2CCTL_I2CEN;
+ dwc2_writel(hsotg, i2cctl, GI2CCTL);
+ i2cctl |= GI2CCTL_I2CEN;
+ dwc2_writel(hsotg, i2cctl, GI2CCTL);
+ }
+
+ return retval;
+}
+
+static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg, usbcfg_old;
+ int retval = 0;
+
+ if (!select_phy)
+ return 0;
+
+ usbcfg = dwc2_readl(hsotg, GUSBCFG);
+ usbcfg_old = usbcfg;
+
+ /*
+ * HS PHY parameters. These parameters are preserved during soft reset
+ * so only program the first time. Do a soft reset immediately after
+ * setting phyif.
+ */
+ switch (hsotg->params.phy_type) {
+ case DWC2_PHY_TYPE_PARAM_ULPI:
+ /* ULPI interface */
+ dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
+ usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
+ usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
+ if (hsotg->params.phy_ulpi_ddr)
+ usbcfg |= GUSBCFG_DDRSEL;
+
+ /* Set external VBUS indicator as needed. */
+ if (hsotg->params.oc_disable)
+ usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
+ GUSBCFG_INDICATORPASSTHROUGH);
+ break;
+ case DWC2_PHY_TYPE_PARAM_UTMI:
+ /* UTMI+ interface */
+ dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
+ usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
+ if (hsotg->params.phy_utmi_width == 16)
+ usbcfg |= GUSBCFG_PHYIF16;
+
+ /* Set turnaround time */
+ if (dwc2_is_device_mode(hsotg)) {
+ usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
+ if (hsotg->params.phy_utmi_width == 16)
+ usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
+ else
+ usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;
+ }
+ break;
+ default:
+ dev_err(hsotg->dev, "FS PHY selected at HS!\n");
+ break;
+ }
+
+ if (usbcfg != usbcfg_old) {
+ dwc2_writel(hsotg, usbcfg, GUSBCFG);
+
+ /* Reset after setting the PHY parameters */
+ retval = dwc2_core_reset(hsotg, false);
+ if (retval) {
+ dev_err(hsotg->dev,
+ "%s: Reset failed, aborting", __func__);
+ return retval;
+ }
+ }
+
+ return retval;
+}
+
+int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
+{
+ u32 usbcfg;
+ int retval = 0;
+
+ if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
+ hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
+ hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+ /* If FS/LS mode with FS/LS PHY */
+ retval = dwc2_fs_phy_init(hsotg, select_phy);
+ if (retval)
+ return retval;
+ } else {
+ /* High speed PHY */
+ retval = dwc2_hs_phy_init(hsotg, select_phy);
+ if (retval)
+ return retval;
+ }
+
+ if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+ hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+ hsotg->params.ulpi_fs_ls) {
+ dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
+ usbcfg = dwc2_readl(hsotg, GUSBCFG);
+ usbcfg |= GUSBCFG_ULPI_FS_LS;
+ usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
+ dwc2_writel(hsotg, usbcfg, GUSBCFG);
+ } else {
+ usbcfg = dwc2_readl(hsotg, GUSBCFG);
+ usbcfg &= ~GUSBCFG_ULPI_FS_LS;
+ usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
+ dwc2_writel(hsotg, usbcfg, GUSBCFG);
+ }
+
+ return retval;
+}
+
MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
MODULE_AUTHOR("Synopsys, Inc.");
MODULE_LICENSE("Dual BSD/GPL");