diff options
Diffstat (limited to 'drivers/usb/dwc3')
| -rw-r--r-- | drivers/usb/dwc3/dwc3-pci.c | 21 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-xilinx.c | 25 | ||||
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 15 |
3 files changed, 52 insertions, 9 deletions
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c index 7ff8fc8f79a9..06d0e88ec8af 100644 --- a/drivers/usb/dwc3/dwc3-pci.c +++ b/drivers/usb/dwc3/dwc3-pci.c @@ -43,6 +43,7 @@ #define PCI_DEVICE_ID_INTEL_ADLP 0x51ee #define PCI_DEVICE_ID_INTEL_ADLM 0x54ee #define PCI_DEVICE_ID_INTEL_ADLS 0x7ae1 +#define PCI_DEVICE_ID_INTEL_RPLS 0x7a61 #define PCI_DEVICE_ID_INTEL_TGL 0x9a15 #define PCI_DEVICE_ID_AMD_MR 0x163a @@ -85,8 +86,8 @@ static const struct acpi_gpio_mapping acpi_dwc3_byt_gpios[] = { static struct gpiod_lookup_table platform_bytcr_gpios = { .dev_id = "0000:00:16.0", .table = { - GPIO_LOOKUP("INT33FC:00", 54, "reset", GPIO_ACTIVE_HIGH), - GPIO_LOOKUP("INT33FC:02", 14, "cs", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:00", 54, "cs", GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("INT33FC:02", 14, "reset", GPIO_ACTIVE_HIGH), {} }, }; @@ -119,6 +120,13 @@ static const struct property_entry dwc3_pci_intel_properties[] = { {} }; +static const struct property_entry dwc3_pci_intel_byt_properties[] = { + PROPERTY_ENTRY_STRING("dr_mode", "peripheral"), + PROPERTY_ENTRY_BOOL("snps,dis_u2_susphy_quirk"), + PROPERTY_ENTRY_BOOL("linux,sysdev_is_parent"), + {} +}; + static const struct property_entry dwc3_pci_mrfld_properties[] = { PROPERTY_ENTRY_STRING("dr_mode", "otg"), PROPERTY_ENTRY_STRING("linux,extcon-name", "mrfld_bcove_pwrsrc"), @@ -161,6 +169,10 @@ static const struct software_node dwc3_pci_intel_swnode = { .properties = dwc3_pci_intel_properties, }; +static const struct software_node dwc3_pci_intel_byt_swnode = { + .properties = dwc3_pci_intel_byt_properties, +}; + static const struct software_node dwc3_pci_intel_mrfld_swnode = { .properties = dwc3_pci_mrfld_properties, }; @@ -344,7 +356,7 @@ static const struct pci_device_id dwc3_pci_id_table[] = { (kernel_ulong_t) &dwc3_pci_intel_swnode, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_BYT), - (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + (kernel_ulong_t) &dwc3_pci_intel_byt_swnode, }, { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_MRFLD), (kernel_ulong_t) &dwc3_pci_intel_mrfld_swnode, }, @@ -409,6 +421,9 @@ static const struct pci_device_id dwc3_pci_id_table[] = { { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ADLS), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_RPLS), + (kernel_ulong_t) &dwc3_pci_intel_swnode, }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TGL), (kernel_ulong_t) &dwc3_pci_intel_swnode, }, diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c index 9cc3ad701a29..a6f3a9b38789 100644 --- a/drivers/usb/dwc3/dwc3-xilinx.c +++ b/drivers/usb/dwc3/dwc3-xilinx.c @@ -99,17 +99,29 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) struct device *dev = priv_data->dev; struct reset_control *crst, *hibrst, *apbrst; struct phy *usb3_phy; - int ret; + int ret = 0; u32 reg; - usb3_phy = devm_phy_get(dev, "usb3-phy"); - if (PTR_ERR(usb3_phy) == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; + usb3_phy = devm_phy_optional_get(dev, "usb3-phy"); + if (IS_ERR(usb3_phy)) { + ret = PTR_ERR(usb3_phy); + dev_err_probe(dev, ret, + "failed to get USB3 PHY\n"); goto err; - } else if (IS_ERR(usb3_phy)) { - usb3_phy = NULL; } + /* + * The following core resets are not required unless a USB3 PHY + * is used, and the subsequent register settings are not required + * unless a core reset is performed (they should be set properly + * by the first-stage boot loader, but may be reverted by a core + * reset). They may also break the configuration if USB3 is actually + * in use but the usb3-phy entry is missing from the device tree. + * Therefore, skip these operations in this case. + */ + if (!usb3_phy) + goto skip_usb3_phy; + crst = devm_reset_control_get_exclusive(dev, "usb_crst"); if (IS_ERR(crst)) { ret = PTR_ERR(crst); @@ -188,6 +200,7 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data) goto err; } +skip_usb3_phy: /* * This routes the USB DMA traffic to go through FPD path instead * of reaching DDR directly. This traffic routing is needed to diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 520031ba38aa..a0c883f19a41 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1291,6 +1291,19 @@ static void __dwc3_prepare_one_trb(struct dwc3_ep *dep, struct dwc3_trb *trb, if (usb_endpoint_xfer_bulk(dep->endpoint.desc) && dep->stream_capable) trb->ctrl |= DWC3_TRB_CTRL_SID_SOFN(stream_id); + /* + * As per data book 4.2.3.2TRB Control Bit Rules section + * + * The controller autonomously checks the HWO field of a TRB to determine if the + * entire TRB is valid. Therefore, software must ensure that the rest of the TRB + * is valid before setting the HWO field to '1'. In most systems, this means that + * software must update the fourth DWORD of a TRB last. + * + * However there is a possibility of CPU re-ordering here which can cause + * controller to observe the HWO bit set prematurely. + * Add a write memory barrier to prevent CPU re-ordering. + */ + wmb(); trb->ctrl |= DWC3_TRB_CTRL_HWO; dwc3_ep_inc_enq(dep); @@ -4147,9 +4160,11 @@ static irqreturn_t dwc3_thread_interrupt(int irq, void *_evt) unsigned long flags; irqreturn_t ret = IRQ_NONE; + local_bh_disable(); spin_lock_irqsave(&dwc->lock, flags); ret = dwc3_process_event_buf(evt); spin_unlock_irqrestore(&dwc->lock, flags); + local_bh_enable(); return ret; } |