summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/zero.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/zero.c')
-rw-r--r--drivers/usb/gadget/zero.c1357
1 files changed, 1357 insertions, 0 deletions
diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c
new file mode 100644
index 000000000000..6e49432071a1
--- /dev/null
+++ b/drivers/usb/gadget/zero.c
@@ -0,0 +1,1357 @@
+/*
+ * zero.c -- Gadget Zero, for USB development
+ *
+ * Copyright (C) 2003-2004 David Brownell
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * 3. The names of the above-listed copyright holders may not be used
+ * to endorse or promote products derived from this software without
+ * specific prior written permission.
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+
+/*
+ * Gadget Zero only needs two bulk endpoints, and is an example of how you
+ * can write a hardware-agnostic gadget driver running inside a USB device.
+ *
+ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
+ * affect most of the driver.
+ *
+ * Use it with the Linux host/master side "usbtest" driver to get a basic
+ * functional test of your device-side usb stack, or with "usb-skeleton".
+ *
+ * It supports two similar configurations. One sinks whatever the usb host
+ * writes, and in return sources zeroes. The other loops whatever the host
+ * writes back, so the host can read it. Module options include:
+ *
+ * buflen=N default N=4096, buffer size used
+ * qlen=N default N=32, how many buffers in the loopback queue
+ * loopdefault default false, list loopback config first
+ *
+ * Many drivers will only have one configuration, letting them be much
+ * simpler if they also don't support high speed operation (like this
+ * driver does).
+ */
+
+#define DEBUG 1
+// #define VERBOSE
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/smp_lock.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/utsname.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+
+#include <asm/byteorder.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/system.h>
+#include <asm/unaligned.h>
+
+#include <linux/usb_ch9.h>
+#include <linux/usb_gadget.h>
+
+#include "gadget_chips.h"
+
+
+/*-------------------------------------------------------------------------*/
+
+#define DRIVER_VERSION "St Patrick's Day 2004"
+
+static const char shortname [] = "zero";
+static const char longname [] = "Gadget Zero";
+
+static const char source_sink [] = "source and sink data";
+static const char loopback [] = "loop input to output";
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * driver assumes self-powered hardware, and
+ * has no way for users to trigger remote wakeup.
+ *
+ * this version autoconfigures as much as possible,
+ * which is reasonable for most "bulk-only" drivers.
+ */
+static const char *EP_IN_NAME; /* source */
+static const char *EP_OUT_NAME; /* sink */
+
+/*-------------------------------------------------------------------------*/
+
+/* big enough to hold our biggest descriptor */
+#define USB_BUFSIZ 256
+
+struct zero_dev {
+ spinlock_t lock;
+ struct usb_gadget *gadget;
+ struct usb_request *req; /* for control responses */
+
+ /* when configured, we have one of two configs:
+ * - source data (in to host) and sink it (out from host)
+ * - or loop it back (out from host back in to host)
+ */
+ u8 config;
+ struct usb_ep *in_ep, *out_ep;
+
+ /* autoresume timer */
+ struct timer_list resume;
+};
+
+#define xprintk(d,level,fmt,args...) \
+ dev_printk(level , &(d)->gadget->dev , fmt , ## args)
+
+#ifdef DEBUG
+#define DBG(dev,fmt,args...) \
+ xprintk(dev , KERN_DEBUG , fmt , ## args)
+#else
+#define DBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* DEBUG */
+
+#ifdef VERBOSE
+#define VDBG DBG
+#else
+#define VDBG(dev,fmt,args...) \
+ do { } while (0)
+#endif /* VERBOSE */
+
+#define ERROR(dev,fmt,args...) \
+ xprintk(dev , KERN_ERR , fmt , ## args)
+#define WARN(dev,fmt,args...) \
+ xprintk(dev , KERN_WARNING , fmt , ## args)
+#define INFO(dev,fmt,args...) \
+ xprintk(dev , KERN_INFO , fmt , ## args)
+
+/*-------------------------------------------------------------------------*/
+
+static unsigned buflen = 4096;
+static unsigned qlen = 32;
+static unsigned pattern = 0;
+
+module_param (buflen, uint, S_IRUGO|S_IWUSR);
+module_param (qlen, uint, S_IRUGO|S_IWUSR);
+module_param (pattern, uint, S_IRUGO|S_IWUSR);
+
+/*
+ * if it's nonzero, autoresume says how many seconds to wait
+ * before trying to wake up the host after suspend.
+ */
+static unsigned autoresume = 0;
+module_param (autoresume, uint, 0);
+
+/*
+ * Normally the "loopback" configuration is second (index 1) so
+ * it's not the default. Here's where to change that order, to
+ * work better with hosts where config changes are problematic.
+ * Or controllers (like superh) that only support one config.
+ */
+static int loopdefault = 0;
+
+module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
+
+/*-------------------------------------------------------------------------*/
+
+/* Thanks to NetChip Technologies for donating this product ID.
+ *
+ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
+ * Instead: allocate your own, using normal USB-IF procedures.
+ */
+#ifndef CONFIG_USB_ZERO_HNPTEST
+#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */
+#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */
+#else
+#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */
+#define DRIVER_PRODUCT_NUM 0xbadd
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * DESCRIPTORS ... most are static, but strings and (full)
+ * configuration descriptors are built on demand.
+ */
+
+#define STRING_MANUFACTURER 25
+#define STRING_PRODUCT 42
+#define STRING_SERIAL 101
+#define STRING_SOURCE_SINK 250
+#define STRING_LOOPBACK 251
+
+/*
+ * This device advertises two configurations; these numbers work
+ * on a pxa250 as well as more flexible hardware.
+ */
+#define CONFIG_SOURCE_SINK 3
+#define CONFIG_LOOPBACK 2
+
+static struct usb_device_descriptor
+device_desc = {
+ .bLength = sizeof device_desc,
+ .bDescriptorType = USB_DT_DEVICE,
+
+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
+
+ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
+ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
+ .iManufacturer = STRING_MANUFACTURER,
+ .iProduct = STRING_PRODUCT,
+ .iSerialNumber = STRING_SERIAL,
+ .bNumConfigurations = 2,
+};
+
+static struct usb_config_descriptor
+source_sink_config = {
+ .bLength = sizeof source_sink_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+ /* compute wTotalLength on the fly */
+ .bNumInterfaces = 1,
+ .bConfigurationValue = CONFIG_SOURCE_SINK,
+ .iConfiguration = STRING_SOURCE_SINK,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* self-powered */
+};
+
+static struct usb_config_descriptor
+loopback_config = {
+ .bLength = sizeof loopback_config,
+ .bDescriptorType = USB_DT_CONFIG,
+
+ /* compute wTotalLength on the fly */
+ .bNumInterfaces = 1,
+ .bConfigurationValue = CONFIG_LOOPBACK,
+ .iConfiguration = STRING_LOOPBACK,
+ .bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 1, /* self-powered */
+};
+
+static struct usb_otg_descriptor
+otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+
+ .bmAttributes = USB_OTG_SRP,
+};
+
+/* one interface in each configuration */
+
+static const struct usb_interface_descriptor
+source_sink_intf = {
+ .bLength = sizeof source_sink_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .iInterface = STRING_SOURCE_SINK,
+};
+
+static const struct usb_interface_descriptor
+loopback_intf = {
+ .bLength = sizeof loopback_intf,
+ .bDescriptorType = USB_DT_INTERFACE,
+
+ .bNumEndpoints = 2,
+ .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
+ .iInterface = STRING_LOOPBACK,
+};
+
+/* two full speed bulk endpoints; their use is config-dependent */
+
+static struct usb_endpoint_descriptor
+fs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static struct usb_endpoint_descriptor
+fs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bEndpointAddress = USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+};
+
+static const struct usb_descriptor_header *fs_source_sink_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &source_sink_intf,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ NULL,
+};
+
+static const struct usb_descriptor_header *fs_loopback_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &loopback_intf,
+ (struct usb_descriptor_header *) &fs_sink_desc,
+ (struct usb_descriptor_header *) &fs_source_desc,
+ NULL,
+};
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+
+/*
+ * usb 2.0 devices need to expose both high speed and full speed
+ * descriptors, unless they only run at full speed.
+ *
+ * that means alternate endpoint descriptors (bigger packets)
+ * and a "device qualifier" ... plus more construction options
+ * for the config descriptor.
+ */
+
+static struct usb_endpoint_descriptor
+hs_source_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16 (512),
+};
+
+static struct usb_endpoint_descriptor
+hs_sink_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = __constant_cpu_to_le16 (512),
+};
+
+static struct usb_qualifier_descriptor
+dev_qualifier = {
+ .bLength = sizeof dev_qualifier,
+ .bDescriptorType = USB_DT_DEVICE_QUALIFIER,
+
+ .bcdUSB = __constant_cpu_to_le16 (0x0200),
+ .bDeviceClass = USB_CLASS_VENDOR_SPEC,
+
+ .bNumConfigurations = 2,
+};
+
+static const struct usb_descriptor_header *hs_source_sink_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &source_sink_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+};
+
+static const struct usb_descriptor_header *hs_loopback_function [] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ (struct usb_descriptor_header *) &loopback_intf,
+ (struct usb_descriptor_header *) &hs_source_desc,
+ (struct usb_descriptor_header *) &hs_sink_desc,
+ NULL,
+};
+
+/* maxpacket and other transfer characteristics vary by speed. */
+#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
+
+#else
+
+/* if there's no high speed support, maxpacket doesn't change. */
+#define ep_desc(g,hs,fs) fs
+
+#endif /* !CONFIG_USB_GADGET_DUALSPEED */
+
+static char manufacturer [50];
+static char serial [40];
+
+/* static strings, in UTF-8 */
+static struct usb_string strings [] = {
+ { STRING_MANUFACTURER, manufacturer, },
+ { STRING_PRODUCT, longname, },
+ { STRING_SERIAL, serial, },
+ { STRING_LOOPBACK, loopback, },
+ { STRING_SOURCE_SINK, source_sink, },
+ { } /* end of list */
+};
+
+static struct usb_gadget_strings stringtab = {
+ .language = 0x0409, /* en-us */
+ .strings = strings,
+};
+
+/*
+ * config descriptors are also handcrafted. these must agree with code
+ * that sets configurations, and with code managing interfaces and their
+ * altsettings. other complexity may come from:
+ *
+ * - high speed support, including "other speed config" rules
+ * - multiple configurations
+ * - interfaces with alternate settings
+ * - embedded class or vendor-specific descriptors
+ *
+ * this handles high speed, and has a second config that could as easily
+ * have been an alternate interface setting (on most hardware).
+ *
+ * NOTE: to demonstrate (and test) more USB capabilities, this driver
+ * should include an altsetting to test interrupt transfers, including
+ * high bandwidth modes at high speed. (Maybe work like Intel's test
+ * device?)
+ */
+static int
+config_buf (struct usb_gadget *gadget,
+ u8 *buf, u8 type, unsigned index)
+{
+ int is_source_sink;
+ int len;
+ const struct usb_descriptor_header **function;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ int hs = (gadget->speed == USB_SPEED_HIGH);
+#endif
+
+ /* two configurations will always be index 0 and index 1 */
+ if (index > 1)
+ return -EINVAL;
+ is_source_sink = loopdefault ? (index == 1) : (index == 0);
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ if (type == USB_DT_OTHER_SPEED_CONFIG)
+ hs = !hs;
+ if (hs)
+ function = is_source_sink
+ ? hs_source_sink_function
+ : hs_loopback_function;
+ else
+#endif
+ function = is_source_sink
+ ? fs_source_sink_function
+ : fs_loopback_function;
+
+ /* for now, don't advertise srp-only devices */
+ if (!gadget->is_otg)
+ function++;
+
+ len = usb_gadget_config_buf (is_source_sink
+ ? &source_sink_config
+ : &loopback_config,
+ buf, USB_BUFSIZ, function);
+ if (len < 0)
+ return len;
+ ((struct usb_config_descriptor *) buf)->bDescriptorType = type;
+ return len;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_request *
+alloc_ep_req (struct usb_ep *ep, unsigned length)
+{
+ struct usb_request *req;
+
+ req = usb_ep_alloc_request (ep, GFP_ATOMIC);
+ if (req) {
+ req->length = length;
+ req->buf = usb_ep_alloc_buffer (ep, length,
+ &req->dma, GFP_ATOMIC);
+ if (!req->buf) {
+ usb_ep_free_request (ep, req);
+ req = NULL;
+ }
+ }
+ return req;
+}
+
+static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->buf)
+ usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
+ usb_ep_free_request (ep, req);
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* optionally require specific source/sink data patterns */
+
+static int
+check_read_data (
+ struct zero_dev *dev,
+ struct usb_ep *ep,
+ struct usb_request *req
+)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+
+ for (i = 0; i < req->actual; i++, buf++) {
+ switch (pattern) {
+ /* all-zeroes has no synchronization issues */
+ case 0:
+ if (*buf == 0)
+ continue;
+ break;
+ /* mod63 stays in sync with short-terminated transfers,
+ * or otherwise when host and gadget agree on how large
+ * each usb transfer request should be. resync is done
+ * with set_interface or set_config.
+ */
+ case 1:
+ if (*buf == (u8)(i % 63))
+ continue;
+ break;
+ }
+ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
+ usb_ep_set_halt (ep);
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static void
+reinit_write_data (
+ struct zero_dev *dev,
+ struct usb_ep *ep,
+ struct usb_request *req
+)
+{
+ unsigned i;
+ u8 *buf = req->buf;
+
+ switch (pattern) {
+ case 0:
+ memset (req->buf, 0, req->length);
+ break;
+ case 1:
+ for (i = 0; i < req->length; i++)
+ *buf++ = (u8) (i % 63);
+ break;
+ }
+}
+
+/* if there is only one request in the queue, there'll always be an
+ * irq delay between end of one request and start of the next.
+ * that prevents using hardware dma queues.
+ */
+static void source_sink_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct zero_dev *dev = ep->driver_data;
+ int status = req->status;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == dev->out_ep)
+ check_read_data (dev, ep, req);
+ else
+ reinit_write_data (dev, ep, req);
+ break;
+
+ /* this endpoint is normally active while we're configured */
+ case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNRESET: /* request dequeued */
+ case -ESHUTDOWN: /* disconnect from host */
+ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
+ req->actual, req->length);
+ if (ep == dev->out_ep)
+ check_read_data (dev, ep, req);
+ free_ep_req (ep, req);
+ return;
+
+ case -EOVERFLOW: /* buffer overrun on read means that
+ * we didn't provide a big enough
+ * buffer.
+ */
+ default:
+#if 1
+ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
+ status, req->actual, req->length);
+#endif
+ case -EREMOTEIO: /* short read */
+ break;
+ }
+
+ status = usb_ep_queue (ep, req, GFP_ATOMIC);
+ if (status) {
+ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n",
+ ep->name, req->length, status);
+ usb_ep_set_halt (ep);
+ /* FIXME recover later ... somehow */
+ }
+}
+
+static struct usb_request *
+source_sink_start_ep (struct usb_ep *ep, int gfp_flags)
+{
+ struct usb_request *req;
+ int status;
+
+ req = alloc_ep_req (ep, buflen);
+ if (!req)
+ return NULL;
+
+ memset (req->buf, 0, req->length);
+ req->complete = source_sink_complete;
+
+ if (strcmp (ep->name, EP_IN_NAME) == 0)
+ reinit_write_data (ep->driver_data, ep, req);
+
+ status = usb_ep_queue (ep, req, gfp_flags);
+ if (status) {
+ struct zero_dev *dev = ep->driver_data;
+
+ ERROR (dev, "start %s --> %d\n", ep->name, status);
+ free_ep_req (ep, req);
+ req = NULL;
+ }
+
+ return req;
+}
+
+static int
+set_source_sink_config (struct zero_dev *dev, int gfp_flags)
+{
+ int result = 0;
+ struct usb_ep *ep;
+ struct usb_gadget *gadget = dev->gadget;
+
+ gadget_for_each_ep (ep, gadget) {
+ const struct usb_endpoint_descriptor *d;
+
+ /* one endpoint writes (sources) zeroes in (to the host) */
+ if (strcmp (ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ if (source_sink_start_ep (ep, gfp_flags) != 0) {
+ dev->in_ep = ep;
+ continue;
+ }
+ usb_ep_disable (ep);
+ result = -EIO;
+ }
+
+ /* one endpoint reads (sinks) anything out (from the host) */
+ } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ if (source_sink_start_ep (ep, gfp_flags) != 0) {
+ dev->out_ep = ep;
+ continue;
+ }
+ usb_ep_disable (ep);
+ result = -EIO;
+ }
+
+ /* ignore any other endpoints */
+ } else
+ continue;
+
+ /* stop on error */
+ ERROR (dev, "can't start %s, result %d\n", ep->name, result);
+ break;
+ }
+ if (result == 0)
+ DBG (dev, "buflen %d\n", buflen);
+
+ /* caller is responsible for cleanup on error */
+ return result;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void loopback_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ struct zero_dev *dev = ep->driver_data;
+ int status = req->status;
+
+ switch (status) {
+
+ case 0: /* normal completion? */
+ if (ep == dev->out_ep) {
+ /* loop this OUT packet back IN to the host */
+ req->zero = (req->actual < req->length);
+ req->length = req->actual;
+ status = usb_ep_queue (dev->in_ep, req, GFP_ATOMIC);
+ if (status == 0)
+ return;
+
+ /* "should never get here" */
+ ERROR (dev, "can't loop %s to %s: %d\n",
+ ep->name, dev->in_ep->name,
+ status);
+ }
+
+ /* queue the buffer for some later OUT packet */
+ req->length = buflen;
+ status = usb_ep_queue (dev->out_ep, req, GFP_ATOMIC);
+ if (status == 0)
+ return;
+
+ /* "should never get here" */
+ /* FALLTHROUGH */
+
+ default:
+ ERROR (dev, "%s loop complete --> %d, %d/%d\n", ep->name,
+ status, req->actual, req->length);
+ /* FALLTHROUGH */
+
+ /* NOTE: since this driver doesn't maintain an explicit record
+ * of requests it submitted (just maintains qlen count), we
+ * rely on the hardware driver to clean up on disconnect or
+ * endpoint disable.
+ */
+ case -ECONNABORTED: /* hardware forced ep reset */
+ case -ECONNRESET: /* request dequeued */
+ case -ESHUTDOWN: /* disconnect from host */
+ free_ep_req (ep, req);
+ return;
+ }
+}
+
+static int
+set_loopback_config (struct zero_dev *dev, int gfp_flags)
+{
+ int result = 0;
+ struct usb_ep *ep;
+ struct usb_gadget *gadget = dev->gadget;
+
+ gadget_for_each_ep (ep, gadget) {
+ const struct usb_endpoint_descriptor *d;
+
+ /* one endpoint writes data back IN to the host */
+ if (strcmp (ep->name, EP_IN_NAME) == 0) {
+ d = ep_desc (gadget, &hs_source_desc, &fs_source_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ dev->in_ep = ep;
+ continue;
+ }
+
+ /* one endpoint just reads OUT packets */
+ } else if (strcmp (ep->name, EP_OUT_NAME) == 0) {
+ d = ep_desc (gadget, &hs_sink_desc, &fs_sink_desc);
+ result = usb_ep_enable (ep, d);
+ if (result == 0) {
+ ep->driver_data = dev;
+ dev->out_ep = ep;
+ continue;
+ }
+
+ /* ignore any other endpoints */
+ } else
+ continue;
+
+ /* stop on error */
+ ERROR (dev, "can't enable %s, result %d\n", ep->name, result);
+ break;
+ }
+
+ /* allocate a bunch of read buffers and queue them all at once.
+ * we buffer at most 'qlen' transfers; fewer if any need more
+ * than 'buflen' bytes each.
+ */
+ if (result == 0) {
+ struct usb_request *req;
+ unsigned i;
+
+ ep = dev->out_ep;
+ for (i = 0; i < qlen && result == 0; i++) {
+ req = alloc_ep_req (ep, buflen);
+ if (req) {
+ req->complete = loopback_complete;
+ result = usb_ep_queue (ep, req, GFP_ATOMIC);
+ if (result)
+ DBG (dev, "%s queue req --> %d\n",
+ ep->name, result);
+ } else
+ result = -ENOMEM;
+ }
+ }
+ if (result == 0)
+ DBG (dev, "qlen %d, buflen %d\n", qlen, buflen);
+
+ /* caller is responsible for cleanup on error */
+ return result;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void zero_reset_config (struct zero_dev *dev)
+{
+ if (dev->config == 0)
+ return;
+
+ DBG (dev, "reset config\n");
+
+ /* just disable endpoints, forcing completion of pending i/o.
+ * all our completion handlers free their requests in this case.
+ */
+ if (dev->in_ep) {
+ usb_ep_disable (dev->in_ep);
+ dev->in_ep = NULL;
+ }
+ if (dev->out_ep) {
+ usb_ep_disable (dev->out_ep);
+ dev->out_ep = NULL;
+ }
+ dev->config = 0;
+ del_timer (&dev->resume);
+}
+
+/* change our operational config. this code must agree with the code
+ * that returns config descriptors, and altsetting code.
+ *
+ * it's also responsible for power management interactions. some
+ * configurations might not work with our current power sources.
+ *
+ * note that some device controller hardware will constrain what this
+ * code can do, perhaps by disallowing more than one configuration or
+ * by limiting configuration choices (like the pxa2xx).
+ */
+static int
+zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
+{
+ int result = 0;
+ struct usb_gadget *gadget = dev->gadget;
+
+ if (number == dev->config)
+ return 0;
+
+ if (gadget_is_sa1100 (gadget) && dev->config) {
+ /* tx fifo is full, but we can't clear it...*/
+ INFO (dev, "can't change configurations\n");
+ return -ESPIPE;
+ }
+ zero_reset_config (dev);
+
+ switch (number) {
+ case CONFIG_SOURCE_SINK:
+ result = set_source_sink_config (dev, gfp_flags);
+ break;
+ case CONFIG_LOOPBACK:
+ result = set_loopback_config (dev, gfp_flags);
+ break;
+ default:
+ result = -EINVAL;
+ /* FALL THROUGH */
+ case 0:
+ return result;
+ }
+
+ if (!result && (!dev->in_ep || !dev->out_ep))
+ result = -ENODEV;
+ if (result)
+ zero_reset_config (dev);
+ else {
+ char *speed;
+
+ switch (gadget->speed) {
+ case USB_SPEED_LOW: speed = "low"; break;
+ case USB_SPEED_FULL: speed = "full"; break;
+ case USB_SPEED_HIGH: speed = "high"; break;
+ default: speed = "?"; break;
+ }
+
+ dev->config = number;
+ INFO (dev, "%s speed config #%d: %s\n", speed, number,
+ (number == CONFIG_SOURCE_SINK)
+ ? source_sink : loopback);
+ }
+ return result;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
+{
+ if (req->status || req->actual != req->length)
+ DBG ((struct zero_dev *) ep->driver_data,
+ "setup complete --> %d, %d/%d\n",
+ req->status, req->actual, req->length);
+}
+
+/*
+ * The setup() callback implements all the ep0 functionality that's
+ * not handled lower down, in hardware or the hardware driver (like
+ * device and endpoint feature flags, and their status). It's all
+ * housekeeping for the gadget function we're implementing. Most of
+ * the work is in config-specific setup.
+ */
+static int
+zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+ struct usb_request *req = dev->req;
+ int value = -EOPNOTSUPP;
+ u16 w_index = ctrl->wIndex;
+ u16 w_value = ctrl->wValue;
+ u16 w_length = ctrl->wLength;
+
+ /* usually this stores reply data in the pre-allocated ep0 buffer,
+ * but config change events will reconfigure hardware.
+ */
+ req->zero = 0;
+ switch (ctrl->bRequest) {
+
+ case USB_REQ_GET_DESCRIPTOR:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ goto unknown;
+ switch (w_value >> 8) {
+
+ case USB_DT_DEVICE:
+ value = min (w_length, (u16) sizeof device_desc);
+ memcpy (req->buf, &device_desc, value);
+ break;
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ case USB_DT_DEVICE_QUALIFIER:
+ if (!gadget->is_dualspeed)
+ break;
+ value = min (w_length, (u16) sizeof dev_qualifier);
+ memcpy (req->buf, &dev_qualifier, value);
+ break;
+
+ case USB_DT_OTHER_SPEED_CONFIG:
+ if (!gadget->is_dualspeed)
+ break;
+ // FALLTHROUGH
+#endif /* CONFIG_USB_GADGET_DUALSPEED */
+ case USB_DT_CONFIG:
+ value = config_buf (gadget, req->buf,
+ w_value >> 8,
+ w_value & 0xff);
+ if (value >= 0)
+ value = min (w_length, (u16) value);
+ break;
+
+ case USB_DT_STRING:
+ /* wIndex == language code.
+ * this driver only handles one language, you can
+ * add string tables for other languages, using
+ * any UTF-8 characters
+ */
+ value = usb_gadget_get_string (&stringtab,
+ w_value & 0xff, req->buf);
+ if (value >= 0)
+ value = min (w_length, (u16) value);
+ break;
+ }
+ break;
+
+ /* currently two configs, two speeds */
+ case USB_REQ_SET_CONFIGURATION:
+ if (ctrl->bRequestType != 0)
+ goto unknown;
+ if (gadget->a_hnp_support)
+ DBG (dev, "HNP available\n");
+ else if (gadget->a_alt_hnp_support)
+ DBG (dev, "HNP needs a different root port\n");
+ else
+ VDBG (dev, "HNP inactive\n");
+ spin_lock (&dev->lock);
+ value = zero_set_config (dev, w_value, GFP_ATOMIC);
+ spin_unlock (&dev->lock);
+ break;
+ case USB_REQ_GET_CONFIGURATION:
+ if (ctrl->bRequestType != USB_DIR_IN)
+ goto unknown;
+ *(u8 *)req->buf = dev->config;
+ value = min (w_length, (u16) 1);
+ break;
+
+ /* until we add altsetting support, or other interfaces,
+ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly)
+ * and already killed pending endpoint I/O.
+ */
+ case USB_REQ_SET_INTERFACE:
+ if (ctrl->bRequestType != USB_RECIP_INTERFACE)
+ goto unknown;
+ spin_lock (&dev->lock);
+ if (dev->config && w_index == 0 && w_value == 0) {
+ u8 config = dev->config;
+
+ /* resets interface configuration, forgets about
+ * previous transaction state (queued bufs, etc)
+ * and re-inits endpoint state (toggle etc)
+ * no response queued, just zero status == success.
+ * if we had more than one interface we couldn't
+ * use this "reset the config" shortcut.
+ */
+ zero_reset_config (dev);
+ zero_set_config (dev, config, GFP_ATOMIC);
+ value = 0;
+ }
+ spin_unlock (&dev->lock);
+ break;
+ case USB_REQ_GET_INTERFACE:
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
+ goto unknown;
+ if (!dev->config)
+ break;
+ if (w_index != 0) {
+ value = -EDOM;
+ break;
+ }
+ *(u8 *)req->buf = 0;
+ value = min (w_length, (u16) 1);
+ break;
+
+ /*
+ * These are the same vendor-specific requests supported by
+ * Intel's USB 2.0 compliance test devices. We exceed that
+ * device spec by allowing multiple-packet requests.
+ */
+ case 0x5b: /* control WRITE test -- fill the buffer */
+ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
+ goto unknown;
+ if (w_value || w_index)
+ break;
+ /* just read that many bytes into the buffer */
+ if (w_length > USB_BUFSIZ)
+ break;
+ value = w_length;
+ break;
+ case 0x5c: /* control READ test -- return the buffer */
+ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
+ goto unknown;
+ if (w_value || w_index)
+ break;
+ /* expect those bytes are still in the buffer; send back */
+ if (w_length > USB_BUFSIZ
+ || w_length != req->length)
+ break;
+ value = w_length;
+ break;
+
+ default:
+unknown:
+ VDBG (dev,
+ "unknown control req%02x.%02x v%04x i%04x l%d\n",
+ ctrl->bRequestType, ctrl->bRequest,
+ w_value, w_index, w_length);
+ }
+
+ /* respond with data transfer before status phase? */
+ if (value >= 0) {
+ req->length = value;
+ req->zero = value < w_length;
+ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
+ if (value < 0) {
+ DBG (dev, "ep_queue --> %d\n", value);
+ req->status = 0;
+ zero_setup_complete (gadget->ep0, req);
+ }
+ }
+
+ /* device either stalls (value < 0) or reports success */
+ return value;
+}
+
+static void
+zero_disconnect (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+ unsigned long flags;
+
+ spin_lock_irqsave (&dev->lock, flags);
+ zero_reset_config (dev);
+
+ /* a more significant application might have some non-usb
+ * activities to quiesce here, saving resources like power
+ * or pushing the notification up a network stack.
+ */
+ spin_unlock_irqrestore (&dev->lock, flags);
+
+ /* next we may get setup() calls to enumerate new connections;
+ * or an unbind() during shutdown (including removing module).
+ */
+}
+
+static void
+zero_autoresume (unsigned long _dev)
+{
+ struct zero_dev *dev = (struct zero_dev *) _dev;
+ int status;
+
+ /* normally the host would be woken up for something
+ * more significant than just a timer firing...
+ */
+ if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
+ status = usb_gadget_wakeup (dev->gadget);
+ DBG (dev, "wakeup --> %d\n", status);
+ }
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+zero_unbind (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+
+ DBG (dev, "unbind\n");
+
+ /* we've already been disconnected ... no i/o is active */
+ if (dev->req)
+ free_ep_req (gadget->ep0, dev->req);
+ del_timer_sync (&dev->resume);
+ kfree (dev);
+ set_gadget_data (gadget, NULL);
+}
+
+static int
+zero_bind (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev;
+ struct usb_ep *ep;
+
+ /* Bulk-only drivers like this one SHOULD be able to
+ * autoconfigure on any sane usb controller driver,
+ * but there may also be important quirks to address.
+ */
+ usb_ep_autoconfig_reset (gadget);
+ ep = usb_ep_autoconfig (gadget, &fs_source_desc);
+ if (!ep) {
+autoconf_fail:
+ printk (KERN_ERR "%s: can't autoconfigure on %s\n",
+ shortname, gadget->name);
+ return -ENODEV;
+ }
+ EP_IN_NAME = ep->name;
+ ep->driver_data = ep; /* claim */
+
+ ep = usb_ep_autoconfig (gadget, &fs_sink_desc);
+ if (!ep)
+ goto autoconf_fail;
+ EP_OUT_NAME = ep->name;
+ ep->driver_data = ep; /* claim */
+
+
+ /*
+ * DRIVER POLICY CHOICE: you may want to do this differently.
+ * One thing to avoid is reusing a bcdDevice revision code
+ * with different host-visible configurations or behavior
+ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
+ */
+ if (gadget_is_net2280 (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
+ } else if (gadget_is_pxa (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0203);
+#if 0
+ } else if (gadget_is_sh(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0204);
+ /* SH has only one configuration; see "loopdefault" */
+ device_desc.bNumConfigurations = 1;
+ /* FIXME make 1 == default.bConfigurationValue */
+#endif
+ } else if (gadget_is_sa1100 (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0205);
+ } else if (gadget_is_goku (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0206);
+ } else if (gadget_is_mq11xx (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0207);
+ } else if (gadget_is_omap (gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0208);
+ } else if (gadget_is_lh7a40x(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0209);
+ } else if (gadget_is_n9604(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0210);
+ } else if (gadget_is_pxa27x(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0211);
+ } else if (gadget_is_s3c2410(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0212);
+ } else if (gadget_is_at91(gadget)) {
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x0213);
+ } else {
+ /* gadget zero is so simple (for now, no altsettings) that
+ * it SHOULD NOT have problems with bulk-capable hardware.
+ * so warn about unrcognized controllers, don't panic.
+ *
+ * things like configuration and altsetting numbering
+ * can need hardware-specific attention though.
+ */
+ printk (KERN_WARNING "%s: controller '%s' not recognized\n",
+ shortname, gadget->name);
+ device_desc.bcdDevice = __constant_cpu_to_le16 (0x9999);
+ }
+
+
+ /* ok, we made sense of the hardware ... */
+ dev = kmalloc (sizeof *dev, SLAB_KERNEL);
+ if (!dev)
+ return -ENOMEM;
+ memset (dev, 0, sizeof *dev);
+ spin_lock_init (&dev->lock);
+ dev->gadget = gadget;
+ set_gadget_data (gadget, dev);
+
+ /* preallocate control response and buffer */
+ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
+ if (!dev->req)
+ goto enomem;
+ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
+ &dev->req->dma, GFP_KERNEL);
+ if (!dev->req->buf)
+ goto enomem;
+
+ dev->req->complete = zero_setup_complete;
+
+ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ /* assume ep0 uses the same value for both speeds ... */
+ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
+
+ /* and that all endpoints are dual-speed */
+ hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
+ hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
+#endif
+
+ if (gadget->is_otg) {
+ otg_descriptor.bmAttributes |= USB_OTG_HNP,
+ source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ if (gadget->is_otg) {
+ otg_descriptor.bmAttributes |= USB_OTG_HNP,
+ source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ usb_gadget_set_selfpowered (gadget);
+
+ init_timer (&dev->resume);
+ dev->resume.function = zero_autoresume;
+ dev->resume.data = (unsigned long) dev;
+ if (autoresume) {
+ source_sink_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ loopback_config.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
+ }
+
+ gadget->ep0->driver_data = dev;
+
+ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
+ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
+ EP_OUT_NAME, EP_IN_NAME);
+
+ snprintf (manufacturer, sizeof manufacturer, "%s %s with %s",
+ system_utsname.sysname, system_utsname.release,
+ gadget->name);
+
+ return 0;
+
+enomem:
+ zero_unbind (gadget);
+ return -ENOMEM;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static void
+zero_suspend (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+
+ if (gadget->speed == USB_SPEED_UNKNOWN)
+ return;
+
+ if (autoresume) {
+ mod_timer (&dev->resume, jiffies + (HZ * autoresume));
+ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
+ } else
+ DBG (dev, "suspend\n");
+}
+
+static void
+zero_resume (struct usb_gadget *gadget)
+{
+ struct zero_dev *dev = get_gadget_data (gadget);
+
+ DBG (dev, "resume\n");
+ del_timer (&dev->resume);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+static struct usb_gadget_driver zero_driver = {
+#ifdef CONFIG_USB_GADGET_DUALSPEED
+ .speed = USB_SPEED_HIGH,
+#else
+ .speed = USB_SPEED_FULL,
+#endif
+ .function = (char *) longname,
+ .bind = zero_bind,
+ .unbind = zero_unbind,
+
+ .setup = zero_setup,
+ .disconnect = zero_disconnect,
+
+ .suspend = zero_suspend,
+ .resume = zero_resume,
+
+ .driver = {
+ .name = (char *) shortname,
+ // .shutdown = ...
+ // .suspend = ...
+ // .resume = ...
+ },
+};
+
+MODULE_AUTHOR ("David Brownell");
+MODULE_LICENSE ("Dual BSD/GPL");
+
+
+static int __init init (void)
+{
+ /* a real value would likely come through some id prom
+ * or module option. this one takes at least two packets.
+ */
+ strlcpy (serial, "0123456789.0123456789.0123456789", sizeof serial);
+
+ return usb_gadget_register_driver (&zero_driver);
+}
+module_init (init);
+
+static void __exit cleanup (void)
+{
+ usb_gadget_unregister_driver (&zero_driver);
+}
+module_exit (cleanup);
+