summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-pci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-pci.c')
-rw-r--r--drivers/usb/host/ehci-pci.c415
1 files changed, 415 insertions, 0 deletions
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
new file mode 100644
index 000000000000..145008853966
--- /dev/null
+++ b/drivers/usb/host/ehci-pci.c
@@ -0,0 +1,415 @@
+/*
+ * EHCI HCD (Host Controller Driver) PCI Bus Glue.
+ *
+ * Copyright (c) 2000-2004 by David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef CONFIG_PCI
+#error "This file is PCI bus glue. CONFIG_PCI must be defined."
+#endif
+
+/*-------------------------------------------------------------------------*/
+
+/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
+ * off the controller (maybe it can boot from highspeed USB disks).
+ */
+static int bios_handoff (struct ehci_hcd *ehci, int where, u32 cap)
+{
+ struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
+
+ /* always say Linux will own the hardware */
+ pci_write_config_byte(pdev, where + 3, 1);
+
+ /* maybe wait a while for BIOS to respond */
+ if (cap & (1 << 16)) {
+ int msec = 5000;
+
+ do {
+ msleep(10);
+ msec -= 10;
+ pci_read_config_dword(pdev, where, &cap);
+ } while ((cap & (1 << 16)) && msec);
+ if (cap & (1 << 16)) {
+ ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
+ where, cap);
+ // some BIOS versions seem buggy...
+ // return 1;
+ ehci_warn (ehci, "continuing after BIOS bug...\n");
+ /* disable all SMIs, and clear "BIOS owns" flag */
+ pci_write_config_dword(pdev, where + 4, 0);
+ pci_write_config_byte(pdev, where + 2, 0);
+ } else
+ ehci_dbg(ehci, "BIOS handoff succeeded\n");
+ }
+ return 0;
+}
+
+/* called by khubd or root hub init threads */
+static int ehci_pci_reset (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ u32 temp;
+ unsigned count = 256/4;
+
+ spin_lock_init (&ehci->lock);
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH (readl (&ehci->caps->hc_capbase));
+ dbg_hcs_params (ehci, "reset");
+ dbg_hcc_params (ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl (&ehci->caps->hcs_params);
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ switch (pdev->vendor) {
+ case PCI_VENDOR_ID_TDI:
+ if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
+ ehci->is_tdi_rh_tt = 1;
+ tdi_reset (ehci);
+ }
+ break;
+ case PCI_VENDOR_ID_AMD:
+ /* AMD8111 EHCI doesn't work, according to AMD errata */
+ if (pdev->device == 0x7463) {
+ ehci_info (ehci, "ignoring AMD8111 (errata)\n");
+ return -EIO;
+ }
+ break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NVidia reports that certain chips don't handle
+ * QH, ITD, or SITD addresses above 2GB. (But TD,
+ * data buffer, and periodic schedule are normal.)
+ */
+ switch (pdev->device) {
+ case 0x003c: /* MCP04 */
+ case 0x005b: /* CK804 */
+ case 0x00d8: /* CK8 */
+ case 0x00e8: /* CK8S */
+ if (pci_set_consistent_dma_mask(pdev,
+ DMA_31BIT_MASK) < 0)
+ ehci_warn (ehci, "can't enable NVidia "
+ "workaround for >2GB RAM\n");
+ break;
+ }
+ break;
+ }
+
+ /* optional debug port, normally in the first BAR */
+ temp = pci_find_capability (pdev, 0x0a);
+ if (temp) {
+ pci_read_config_dword(pdev, temp, &temp);
+ temp >>= 16;
+ if ((temp & (3 << 13)) == (1 << 13)) {
+ temp &= 0x1fff;
+ ehci->debug = hcd->regs + temp;
+ temp = readl (&ehci->debug->control);
+ ehci_info (ehci, "debug port %d%s\n",
+ HCS_DEBUG_PORT(ehci->hcs_params),
+ (temp & DBGP_ENABLED)
+ ? " IN USE"
+ : "");
+ if (!(temp & DBGP_ENABLED))
+ ehci->debug = NULL;
+ }
+ }
+
+ temp = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
+ } else
+ temp = 0;
+
+ /* EHCI 0.96 and later may have "extended capabilities" */
+ while (temp && count--) {
+ u32 cap;
+
+ pci_read_config_dword (to_pci_dev(hcd->self.controller),
+ temp, &cap);
+ ehci_dbg (ehci, "capability %04x at %02x\n", cap, temp);
+ switch (cap & 0xff) {
+ case 1: /* BIOS/SMM/... handoff */
+ if (bios_handoff (ehci, temp, cap) != 0)
+ return -EOPNOTSUPP;
+ break;
+ case 0: /* illegal reserved capability */
+ ehci_warn (ehci, "illegal capability!\n");
+ cap = 0;
+ /* FALLTHROUGH */
+ default: /* unknown */
+ break;
+ }
+ temp = (cap >> 8) & 0xff;
+ }
+ if (!count) {
+ ehci_err (ehci, "bogus capabilities ... PCI problems!\n");
+ return -EIO;
+ }
+ if (ehci_is_TDI(ehci))
+ ehci_reset (ehci);
+
+ ehci_port_power (ehci, 0);
+
+ /* at least the Genesys GL880S needs fixup here */
+ temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
+ temp &= 0x0f;
+ if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
+ ehci_dbg (ehci, "bogus port configuration: "
+ "cc=%d x pcc=%d < ports=%d\n",
+ HCS_N_CC(ehci->hcs_params),
+ HCS_N_PCC(ehci->hcs_params),
+ HCS_N_PORTS(ehci->hcs_params));
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev;
+
+ pdev = to_pci_dev(hcd->self.controller);
+ switch (pdev->vendor) {
+ case 0x17a0: /* GENESYS */
+ /* GL880S: should be PORTS=2 */
+ temp |= (ehci->hcs_params & ~0xf);
+ ehci->hcs_params = temp;
+ break;
+ case PCI_VENDOR_ID_NVIDIA:
+ /* NF4: should be PCC=10 */
+ break;
+ }
+ }
+ }
+
+ /* force HC to halt state */
+ return ehci_halt (ehci);
+}
+
+static int ehci_pci_start (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ int result = 0;
+
+ if (hcd->self.controller->bus == &pci_bus_type) {
+ struct pci_dev *pdev;
+ u16 port_wake;
+
+ pdev = to_pci_dev(hcd->self.controller);
+
+ /* Serial Bus Release Number is at PCI 0x60 offset */
+ pci_read_config_byte(pdev, 0x60, &ehci->sbrn);
+
+ /* port wake capability, reported by boot firmware */
+ pci_read_config_word(pdev, 0x62, &port_wake);
+ hcd->can_wakeup = (port_wake & 1) != 0;
+
+ /* help hc dma work well with cachelines */
+ result = pci_set_mwi(pdev);
+ if (result)
+ ehci_dbg(ehci, "unable to enable MWI - not fatal.\n");
+ }
+
+ return ehci_run (hcd);
+}
+
+/* always called by thread; normally rmmod */
+
+static void ehci_pci_stop (struct usb_hcd *hcd)
+{
+ ehci_stop (hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+#ifdef CONFIG_PM
+
+/* suspend/resume, section 4.3 */
+
+/* These routines rely on the bus (pci, platform, etc)
+ * to handle powerdown and wakeup, and currently also on
+ * transceivers that don't need any software attention to set up
+ * the right sort of wakeup.
+ */
+
+static int ehci_pci_suspend (struct usb_hcd *hcd, pm_message_t message)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep (100);
+
+#ifdef CONFIG_USB_SUSPEND
+ (void) usb_suspend_device (hcd->self.root_hub);
+#else
+ usb_lock_device (hcd->self.root_hub);
+ (void) ehci_bus_suspend (hcd);
+ usb_unlock_device (hcd->self.root_hub);
+#endif
+
+ // save (PCI) FLADJ in case of Vaux power loss
+ // ... we'd only use it to handle clock skew
+
+ return 0;
+}
+
+static int ehci_pci_resume (struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci (hcd);
+ unsigned port;
+ struct usb_device *root = hcd->self.root_hub;
+ int retval = -EINVAL;
+
+ // maybe restore (PCI) FLADJ
+
+ if (time_before (jiffies, ehci->next_statechange))
+ msleep (100);
+
+ /* If any port is suspended (or owned by the companion),
+ * we know we can/must resume the HC (and mustn't reset it).
+ */
+ for (port = HCS_N_PORTS (ehci->hcs_params); port > 0; ) {
+ u32 status;
+ port--;
+ status = readl (&ehci->regs->port_status [port]);
+ if (!(status & PORT_POWER))
+ continue;
+ if (status & (PORT_SUSPEND | PORT_OWNER)) {
+ down (&hcd->self.root_hub->serialize);
+ retval = ehci_bus_resume (hcd);
+ up (&hcd->self.root_hub->serialize);
+ break;
+ }
+ if (!root->children [port])
+ continue;
+ dbg_port (ehci, __FUNCTION__, port + 1, status);
+ usb_set_device_state (root->children[port],
+ USB_STATE_NOTATTACHED);
+ }
+
+ /* Else reset, to cope with power loss or flush-to-storage
+ * style "resume" having activated BIOS during reboot.
+ */
+ if (port == 0) {
+ (void) ehci_halt (ehci);
+ (void) ehci_reset (ehci);
+ (void) ehci_pci_reset (hcd);
+
+ /* emptying the schedule aborts any urbs */
+ spin_lock_irq (&ehci->lock);
+ if (ehci->reclaim)
+ ehci->reclaim_ready = 1;
+ ehci_work (ehci, NULL);
+ spin_unlock_irq (&ehci->lock);
+
+ /* restart; khubd will disconnect devices */
+ retval = ehci_run (hcd);
+
+ /* here we "know" root ports should always stay powered;
+ * but some controllers may lose all power.
+ */
+ ehci_port_power (ehci, 1);
+ }
+
+ return retval;
+}
+#endif
+
+static const struct hc_driver ehci_pci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /*
+ * basic lifecycle operations
+ */
+ .reset = ehci_pci_reset,
+ .start = ehci_pci_start,
+#ifdef CONFIG_PM
+ .suspend = ehci_pci_suspend,
+ .resume = ehci_pci_resume,
+#endif
+ .stop = ehci_pci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ehci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* PCI driver selection metadata; PCI hotplugging uses this */
+static const struct pci_device_id pci_ids [] = { {
+ /* handle any USB 2.0 EHCI controller */
+ PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
+ .driver_data = (unsigned long) &ehci_pci_hc_driver,
+ },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE (pci, pci_ids);
+
+/* pci driver glue; this is a "new style" PCI driver module */
+static struct pci_driver ehci_pci_driver = {
+ .name = (char *) hcd_name,
+ .id_table = pci_ids,
+ .owner = THIS_MODULE,
+
+ .probe = usb_hcd_pci_probe,
+ .remove = usb_hcd_pci_remove,
+
+#ifdef CONFIG_PM
+ .suspend = usb_hcd_pci_suspend,
+ .resume = usb_hcd_pci_resume,
+#endif
+};
+
+static int __init ehci_hcd_pci_init (void)
+{
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_debug ("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
+ hcd_name,
+ sizeof (struct ehci_qh), sizeof (struct ehci_qtd),
+ sizeof (struct ehci_itd), sizeof (struct ehci_sitd));
+
+ return pci_register_driver (&ehci_pci_driver);
+}
+module_init (ehci_hcd_pci_init);
+
+static void __exit ehci_hcd_pci_cleanup (void)
+{
+ pci_unregister_driver (&ehci_pci_driver);
+}
+module_exit (ehci_hcd_pci_cleanup);