summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r--drivers/usb/host/xhci.c78
1 files changed, 63 insertions, 15 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 500865975687..517ec3206f6e 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1032,7 +1032,7 @@ int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
writel(command, &xhci->op_regs->command);
xhci->broken_suspend = 0;
if (xhci_handshake(&xhci->op_regs->status,
- STS_SAVE, 0, 10 * 1000)) {
+ STS_SAVE, 0, 20 * 1000)) {
/*
* AMD SNPS xHC 3.0 occasionally does not clear the
* SSS bit of USBSTS and when driver tries to poll
@@ -1108,6 +1108,18 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
hibernated = true;
if (!hibernated) {
+ /*
+ * Some controllers might lose power during suspend, so wait
+ * for controller not ready bit to clear, just as in xHC init.
+ */
+ retval = xhci_handshake(&xhci->op_regs->status,
+ STS_CNR, 0, 10 * 1000 * 1000);
+ if (retval) {
+ xhci_warn(xhci, "Controller not ready at resume %d\n",
+ retval);
+ spin_unlock_irq(&xhci->lock);
+ return retval;
+ }
/* step 1: restore register */
xhci_restore_registers(xhci);
/* step 2: initialize command ring buffer */
@@ -3083,6 +3095,7 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
unsigned int ep_index;
unsigned long flags;
u32 ep_flag;
+ int err;
xhci = hcd_to_xhci(hcd);
if (!host_ep->hcpriv)
@@ -3142,7 +3155,17 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
xhci_free_command(xhci, cfg_cmd);
goto cleanup;
}
- xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, ep_index, 0);
+
+ err = xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id,
+ ep_index, 0);
+ if (err < 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, cfg_cmd);
+ xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
+ __func__, err);
+ goto cleanup;
+ }
+
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -3156,8 +3179,16 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
ctrl_ctx, ep_flag, ep_flag);
xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index);
- xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
+ err = xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
udev->slot_id, false);
+ if (err < 0) {
+ spin_unlock_irqrestore(&xhci->lock, flags);
+ xhci_free_command(xhci, cfg_cmd);
+ xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
+ __func__, err);
+ goto cleanup;
+ }
+
xhci_ring_cmd_db(xhci);
spin_unlock_irqrestore(&xhci->lock, flags);
@@ -4674,12 +4705,12 @@ static int xhci_update_timeout_for_endpoint(struct xhci_hcd *xhci,
alt_timeout = xhci_call_host_update_timeout_for_endpoint(xhci, udev,
desc, state, timeout);
- /* If we found we can't enable hub-initiated LPM, or
+ /* If we found we can't enable hub-initiated LPM, and
* the U1 or U2 exit latency was too high to allow
- * device-initiated LPM as well, just stop searching.
+ * device-initiated LPM as well, then we will disable LPM
+ * for this device, so stop searching any further.
*/
- if (alt_timeout == USB3_LPM_DISABLED ||
- alt_timeout == USB3_LPM_DEVICE_INITIATED) {
+ if (alt_timeout == USB3_LPM_DISABLED) {
*timeout = alt_timeout;
return -E2BIG;
}
@@ -4790,10 +4821,12 @@ static u16 xhci_calculate_lpm_timeout(struct usb_hcd *hcd,
if (intf->dev.driver) {
driver = to_usb_driver(intf->dev.driver);
if (driver && driver->disable_hub_initiated_lpm) {
- dev_dbg(&udev->dev, "Hub-initiated %s disabled "
- "at request of driver %s\n",
- state_name, driver->name);
- return xhci_get_timeout_no_hub_lpm(udev, state);
+ dev_dbg(&udev->dev, "Hub-initiated %s disabled at request of driver %s\n",
+ state_name, driver->name);
+ timeout = xhci_get_timeout_no_hub_lpm(udev,
+ state);
+ if (timeout == USB3_LPM_DISABLED)
+ return timeout;
}
}
@@ -5077,11 +5110,18 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
hcd->has_tt = 1;
} else {
/*
- * Some 3.1 hosts return sbrn 0x30, use xhci supported protocol
- * minor revision instead of sbrn. Minor revision is a two digit
- * BCD containing minor and sub-minor numbers, only show minor.
+ * Early xHCI 1.1 spec did not mention USB 3.1 capable hosts
+ * should return 0x31 for sbrn, or that the minor revision
+ * is a two digit BCD containig minor and sub-minor numbers.
+ * This was later clarified in xHCI 1.2.
+ *
+ * Some USB 3.1 capable hosts therefore have sbrn 0x30, and
+ * minor revision set to 0x1 instead of 0x10.
*/
- minor_rev = xhci->usb3_rhub.min_rev / 0x10;
+ if (xhci->usb3_rhub.min_rev == 0x1)
+ minor_rev = 1;
+ else
+ minor_rev = xhci->usb3_rhub.min_rev / 0x10;
switch (minor_rev) {
case 2:
@@ -5198,8 +5238,16 @@ static void xhci_clear_tt_buffer_complete(struct usb_hcd *hcd,
unsigned int ep_index;
unsigned long flags;
+ /*
+ * udev might be NULL if tt buffer is cleared during a failed device
+ * enumeration due to a halted control endpoint. Usb core might
+ * have allocated a new udev for the next enumeration attempt.
+ */
+
xhci = hcd_to_xhci(hcd);
udev = (struct usb_device *)ep->hcpriv;
+ if (!udev)
+ return;
slot_id = udev->slot_id;
ep_index = xhci_get_endpoint_index(&ep->desc);