diff options
Diffstat (limited to 'drivers/usb/host')
30 files changed, 456 insertions, 380 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 16758b12a5e9..d809671c5fea 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0 # # USB Host Controller Drivers # @@ -69,13 +70,13 @@ config USB_XHCI_MTK If unsure, say N. config USB_XHCI_MVEBU - tristate "xHCI support for Marvell Armada 375/38x" + tristate "xHCI support for Marvell Armada 375/38x/37xx" select USB_XHCI_PLATFORM depends on HAS_IOMEM depends on ARCH_MVEBU || COMPILE_TEST ---help--- Say 'Y' to enable the support for the xHCI host controller - found in Marvell Armada 375/38x ARM SOCs. + found in Marvell Armada 375/38x/37xx ARM SOCs. config USB_XHCI_RCAR tristate "xHCI support for Renesas R-Car SoCs" @@ -179,8 +180,7 @@ config XPS_USB_HCD_XILINX devices only. config USB_EHCI_FSL - tristate "Support for Freescale PPC on-chip EHCI USB controller" - depends on FSL_SOC + tristate "Support for Freescale on-chip EHCI USB controller" select USB_EHCI_ROOT_HUB_TT ---help--- Variation of ARC USB block used in some Freescale chips. diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 0a9fd2022acf..e3d0c1c25160 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -23,6 +23,7 @@ #include <linux/platform_device.h> #include <linux/fsl_devices.h> #include <linux/of_platform.h> +#include <linux/io.h> #include "ehci.h" #include "ehci-fsl.h" @@ -50,6 +51,7 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) struct resource *res; int irq; int retval; + u32 tmp; pr_debug("initializing FSL-SOC USB Controller\n"); @@ -114,17 +116,22 @@ static int fsl_ehci_drv_probe(struct platform_device *pdev) } /* Enable USB controller, 83xx or 8536 */ - if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) - clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL, - CONTROL_REGISTER_W1C_MASK, 0x4); - + if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6) { + tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= 0x4; + iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL); + } /* * Enable UTMI phy and program PTS field in UTMI mode before asserting * controller reset for USB Controller version 2.5 */ if (pdata->has_fsl_erratum_a007792) { - clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL, - CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN); + tmp = ioread32be(hcd->regs + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= CTRL_UTMI_PHY_EN; + iowrite32be(tmp, hcd->regs + FSL_SOC_USB_CTRL); + writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1); } @@ -174,7 +181,7 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, enum fsl_usb2_phy_modes phy_mode, unsigned int port_offset) { - u32 portsc; + u32 portsc, tmp; struct ehci_hcd *ehci = hcd_to_ehci(hcd); void __iomem *non_ehci = hcd->regs; struct device *dev = hcd->self.controller; @@ -192,11 +199,16 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_ULPI: if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ - clrbits32(non_ehci + FSL_SOC_USB_CTRL, - CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN); - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, - CONTROL_REGISTER_W1C_MASK, - ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN); + /* turn off UTMI PHY first */ + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~(CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN); + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + + /* then turn on ULPI and enable USB controller */ + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN; + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); } portsc |= PORT_PTS_ULPI; break; @@ -210,16 +222,21 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, case FSL_USB2_PHY_UTMI_DUAL: if (pdata->have_sysif_regs && pdata->controller_ver) { /* controller version 1.6 or above */ - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, - CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN); + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= UTMI_PHY_EN; + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to become stable - 10ms*/ } /* enable UTMI PHY */ - if (pdata->have_sysif_regs) - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, - CONTROL_REGISTER_W1C_MASK, - CTRL_UTMI_PHY_EN); + if (pdata->have_sysif_regs) { + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= CTRL_UTMI_PHY_EN; + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + } portsc |= PORT_PTS_UTMI; break; case FSL_USB2_PHY_NONE: @@ -241,9 +258,12 @@ static int ehci_fsl_setup_phy(struct usb_hcd *hcd, ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]); - if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) - clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL, - CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN); + if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs) { + tmp = ioread32be(non_ehci + FSL_SOC_USB_CTRL); + tmp &= ~CONTROL_REGISTER_W1C_MASK; + tmp |= USB_CTRL_USB_EN; + iowrite32be(tmp, non_ehci + FSL_SOC_USB_CTRL); + } return 0; } @@ -284,14 +304,9 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci) return -EINVAL; if (pdata->operating_mode == FSL_USB2_MPH_HOST) { - unsigned int chip, rev, svr; - - svr = mfspr(SPRN_SVR); - chip = svr >> 16; - rev = (svr >> 4) & 0xf; /* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */ - if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055)) + if (pdata->has_fsl_erratum_14 == 1) ehci->has_fsl_port_bug = 1; if (pdata->port_enables & FSL_USB2_PORT0_ENABLED) diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index f26109eafdbf..66ec1fdf9fe7 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -302,3 +302,4 @@ MODULE_AUTHOR("Chao Xie <chao.xie@marvell.com>"); MODULE_AUTHOR("Neil Zhang <zhangwm@marvell.com>"); MODULE_ALIAS("mv-ehci"); MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(of, ehci_mv_dt_ids); diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 7e4c13346a1e..7d20296cbe9f 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -159,11 +159,12 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) /* get the PHY device */ phy = devm_usb_get_phy_by_phandle(dev, "phys", i); if (IS_ERR(phy)) { - /* Don't bail out if PHY is not absolutely necessary */ - if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) + ret = PTR_ERR(phy); + if (ret == -ENODEV) { /* no PHY */ + phy = NULL; continue; + } - ret = PTR_ERR(phy); if (ret != -EPROBE_DEFER) dev_err(dev, "Can't get PHY for port %d: %d\n", i, ret); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 1ad72647a069..790acf3633e8 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -182,6 +182,23 @@ static int ehci_orion_drv_reset(struct usb_hcd *hcd) return ret; } +static int __maybe_unused ehci_orion_drv_suspend(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + return ehci_suspend(hcd, device_may_wakeup(dev)); +} + +static int __maybe_unused ehci_orion_drv_resume(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + + return ehci_resume(hcd, false); +} + +static SIMPLE_DEV_PM_OPS(ehci_orion_pm_ops, ehci_orion_drv_suspend, + ehci_orion_drv_resume); + static const struct ehci_driver_overrides orion_overrides __initconst = { .extra_priv_size = sizeof(struct orion_ehci_hcd), .reset = ehci_orion_drv_reset, @@ -257,15 +274,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) if (IS_ERR(priv->phy)) { err = PTR_ERR(priv->phy); if (err != -ENOSYS) - goto err_phy_get; - } else { - err = phy_init(priv->phy); - if (err) - goto err_phy_init; - - err = phy_power_on(priv->phy); - if (err) - goto err_phy_power_on; + goto err_dis_clk; } /* @@ -297,19 +306,12 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_add_hcd; + goto err_dis_clk; device_wakeup_enable(hcd->self.controller); return 0; -err_add_hcd: - if (!IS_ERR(priv->phy)) - phy_power_off(priv->phy); -err_phy_power_on: - if (!IS_ERR(priv->phy)) - phy_exit(priv->phy); -err_phy_init: -err_phy_get: +err_dis_clk: if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk); usb_put_hcd(hcd); @@ -327,11 +329,6 @@ static int ehci_orion_drv_remove(struct platform_device *pdev) usb_remove_hcd(hcd); - if (!IS_ERR(priv->phy)) { - phy_power_off(priv->phy); - phy_exit(priv->phy); - } - if (!IS_ERR(priv->clk)) clk_disable_unprepare(priv->clk); @@ -354,6 +351,7 @@ static struct platform_driver ehci_orion_driver = { .driver = { .name = "orion-ehci", .of_match_table = ehci_orion_dt_ids, + .pm = &ehci_orion_pm_ops, }, }; diff --git a/drivers/usb/host/fsl-mph-dr-of.c b/drivers/usb/host/fsl-mph-dr-of.c index 677f9d592109..4f8b8a08c914 100644 --- a/drivers/usb/host/fsl-mph-dr-of.c +++ b/drivers/usb/host/fsl-mph-dr-of.c @@ -225,6 +225,12 @@ static int fsl_usb2_mph_dr_of_probe(struct platform_device *ofdev) pdata->has_fsl_erratum_a005697 = of_property_read_bool(np, "fsl,usb_erratum-a005697"); + if (of_get_property(np, "fsl,usb_erratum_14", NULL)) + pdata->has_fsl_erratum_14 = 1; + else + pdata->has_fsl_erratum_14 = 0; + + /* * Determine whether phy_clk_valid needs to be checked * by reading property in device tree diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index b21c386e6a46..28bf8bfb091e 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2159,25 +2159,15 @@ static int isp1362_show(struct seq_file *s, void *unused) return 0; } - -static int isp1362_open(struct inode *inode, struct file *file) -{ - return single_open(file, isp1362_show, inode); -} - -static const struct file_operations debug_ops = { - .open = isp1362_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; +DEFINE_SHOW_ATTRIBUTE(isp1362); /* expect just one isp1362_hcd per system */ static void create_debug_file(struct isp1362_hcd *isp1362_hcd) { isp1362_hcd->debug_file = debugfs_create_file("isp1362", S_IRUGO, usb_debug_root, - isp1362_hcd, &debug_ops); + isp1362_hcd, + &isp1362_fops); } static void remove_debug_file(struct isp1362_hcd *isp1362_hcd) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index ec6739ef3129..fc35a7993b7b 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -141,8 +141,11 @@ static struct regmap *at91_dt_syscon_sfr(void) struct regmap *regmap; regmap = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr"); - if (IS_ERR(regmap)) - regmap = NULL; + if (IS_ERR(regmap)) { + regmap = syscon_regmap_lookup_by_compatible("microchip,sam9x60-sfr"); + if (IS_ERR(regmap)) + regmap = NULL; + } return regmap; } diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index a55cbba40a5a..ca8a94f15ac0 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -9,6 +9,7 @@ */ #include <linux/clk.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/interrupt.h> #include <linux/jiffies.h> @@ -40,6 +41,8 @@ struct da8xx_ohci_hcd { struct regulator *vbus_reg; struct notifier_block nb; unsigned int reg_enabled; + struct gpio_desc *vbus_gpio; + struct gpio_desc *oc_gpio; }; #define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv) @@ -86,12 +89,13 @@ static void ohci_da8xx_disable(struct usb_hcd *hcd) static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) { struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); - struct device *dev = hcd->self.controller; - struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); + struct device *dev = hcd->self.controller; int ret; - if (hub && hub->set_power) - return hub->set_power(1, on); + if (da8xx_ohci->vbus_gpio) { + gpiod_set_value_cansleep(da8xx_ohci->vbus_gpio, on); + return 0; + } if (!da8xx_ohci->vbus_reg) return 0; @@ -119,11 +123,9 @@ static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on) static int ohci_da8xx_get_power(struct usb_hcd *hcd) { struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); - struct device *dev = hcd->self.controller; - struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); - if (hub && hub->get_power) - return hub->get_power(1); + if (da8xx_ohci->vbus_gpio) + return gpiod_get_value_cansleep(da8xx_ohci->vbus_gpio); if (da8xx_ohci->vbus_reg) return regulator_is_enabled(da8xx_ohci->vbus_reg); @@ -134,13 +136,11 @@ static int ohci_da8xx_get_power(struct usb_hcd *hcd) static int ohci_da8xx_get_oci(struct usb_hcd *hcd) { struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); - struct device *dev = hcd->self.controller; - struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); unsigned int flags; int ret; - if (hub && hub->get_oci) - return hub->get_oci(1); + if (da8xx_ohci->oc_gpio) + return gpiod_get_value_cansleep(da8xx_ohci->oc_gpio); if (!da8xx_ohci->vbus_reg) return 0; @@ -158,10 +158,8 @@ static int ohci_da8xx_get_oci(struct usb_hcd *hcd) static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) { struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); - struct device *dev = hcd->self.controller; - struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); - if (hub && hub->set_power) + if (da8xx_ohci->vbus_gpio) return 1; if (da8xx_ohci->vbus_reg) @@ -173,10 +171,8 @@ static int ohci_da8xx_has_set_power(struct usb_hcd *hcd) static int ohci_da8xx_has_oci(struct usb_hcd *hcd) { struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); - struct device *dev = hcd->self.controller; - struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); - if (hub && hub->get_oci) + if (da8xx_ohci->oc_gpio) return 1; if (da8xx_ohci->vbus_reg) @@ -196,19 +192,6 @@ static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd) return 0; } -/* - * Handle the port over-current indicator change. - */ -static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub, - unsigned port) -{ - ocic_mask |= 1 << port; - - /* Once over-current is detected, the port needs to be powered down */ - if (hub->get_oci(port) > 0) - hub->set_power(port, 0); -} - static int ohci_da8xx_regulator_event(struct notifier_block *nb, unsigned long event, void *data) { @@ -223,16 +206,23 @@ static int ohci_da8xx_regulator_event(struct notifier_block *nb, return 0; } +static irqreturn_t ohci_da8xx_oc_handler(int irq, void *data) +{ + struct da8xx_ohci_hcd *da8xx_ohci = data; + + if (gpiod_get_value(da8xx_ohci->oc_gpio)) + gpiod_set_value(da8xx_ohci->vbus_gpio, 0); + + return IRQ_HANDLED; +} + static int ohci_da8xx_register_notify(struct usb_hcd *hcd) { struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd); struct device *dev = hcd->self.controller; - struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); int ret = 0; - if (hub && hub->ocic_notify) { - ret = hub->ocic_notify(ohci_da8xx_ocic_handler); - } else if (da8xx_ohci->vbus_reg) { + if (!da8xx_ohci->oc_gpio && da8xx_ohci->vbus_reg) { da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event; ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg, &da8xx_ohci->nb); @@ -244,15 +234,6 @@ static int ohci_da8xx_register_notify(struct usb_hcd *hcd) return ret; } -static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd) -{ - struct device *dev = hcd->self.controller; - struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev); - - if (hub && hub->ocic_notify) - hub->ocic_notify(NULL); -} - static int ohci_da8xx_reset(struct usb_hcd *hcd) { struct device *dev = hcd->self.controller; @@ -402,34 +383,35 @@ MODULE_DEVICE_TABLE(of, da8xx_ohci_ids); static int ohci_da8xx_probe(struct platform_device *pdev) { struct da8xx_ohci_hcd *da8xx_ohci; + struct device *dev = &pdev->dev; + int error, hcd_irq, oc_irq; struct usb_hcd *hcd; struct resource *mem; - int error, irq; - hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev, - dev_name(&pdev->dev)); + + hcd = usb_create_hcd(&ohci_da8xx_hc_driver, dev, dev_name(dev)); if (!hcd) return -ENOMEM; da8xx_ohci = to_da8xx_ohci(hcd); da8xx_ohci->hcd = hcd; - da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, NULL); + da8xx_ohci->usb11_clk = devm_clk_get(dev, NULL); if (IS_ERR(da8xx_ohci->usb11_clk)) { error = PTR_ERR(da8xx_ohci->usb11_clk); if (error != -EPROBE_DEFER) - dev_err(&pdev->dev, "Failed to get clock.\n"); + dev_err(dev, "Failed to get clock.\n"); goto err; } - da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy"); + da8xx_ohci->usb11_phy = devm_phy_get(dev, "usb-phy"); if (IS_ERR(da8xx_ohci->usb11_phy)) { error = PTR_ERR(da8xx_ohci->usb11_phy); if (error != -EPROBE_DEFER) - dev_err(&pdev->dev, "Failed to get phy.\n"); + dev_err(dev, "Failed to get phy.\n"); goto err; } - da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus"); + da8xx_ohci->vbus_reg = devm_regulator_get_optional(dev, "vbus"); if (IS_ERR(da8xx_ohci->vbus_reg)) { error = PTR_ERR(da8xx_ohci->vbus_reg); if (error == -ENODEV) { @@ -437,13 +419,34 @@ static int ohci_da8xx_probe(struct platform_device *pdev) } else if (error == -EPROBE_DEFER) { goto err; } else { - dev_err(&pdev->dev, "Failed to get regulator\n"); + dev_err(dev, "Failed to get regulator\n"); goto err; } } + da8xx_ohci->vbus_gpio = devm_gpiod_get_optional(dev, "vbus", + GPIOD_OUT_HIGH); + if (IS_ERR(da8xx_ohci->vbus_gpio)) + goto err; + + da8xx_ohci->oc_gpio = devm_gpiod_get_optional(dev, "oc", GPIOD_IN); + if (IS_ERR(da8xx_ohci->oc_gpio)) + goto err; + + if (da8xx_ohci->oc_gpio) { + oc_irq = gpiod_to_irq(da8xx_ohci->oc_gpio); + if (oc_irq < 0) + goto err; + + error = devm_request_irq(dev, oc_irq, ohci_da8xx_oc_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + "OHCI over-current indicator", da8xx_ohci); + if (error) + goto err; + } + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->regs = devm_ioremap_resource(&pdev->dev, mem); + hcd->regs = devm_ioremap_resource(dev, mem); if (IS_ERR(hcd->regs)) { error = PTR_ERR(hcd->regs); goto err; @@ -451,13 +454,13 @@ static int ohci_da8xx_probe(struct platform_device *pdev) hcd->rsrc_start = mem->start; hcd->rsrc_len = resource_size(mem); - irq = platform_get_irq(pdev, 0); - if (irq < 0) { + hcd_irq = platform_get_irq(pdev, 0); + if (hcd_irq < 0) { error = -ENODEV; goto err; } - error = usb_add_hcd(hcd, irq, 0); + error = usb_add_hcd(hcd, hcd_irq, 0); if (error) goto err; @@ -480,7 +483,6 @@ static int ohci_da8xx_remove(struct platform_device *pdev) { struct usb_hcd *hcd = platform_get_drvdata(pdev); - ohci_da8xx_unregister_notify(hcd); usb_remove_hcd(hcd); usb_put_hcd(hcd); diff --git a/drivers/usb/host/ohci-mem.c b/drivers/usb/host/ohci-mem.c index b3da3f12e5b1..3965ac0341eb 100644 --- a/drivers/usb/host/ohci-mem.c +++ b/drivers/usb/host/ohci-mem.c @@ -57,14 +57,10 @@ static int ohci_mem_init (struct ohci_hcd *ohci) static void ohci_mem_cleanup (struct ohci_hcd *ohci) { - if (ohci->td_cache) { - dma_pool_destroy (ohci->td_cache); - ohci->td_cache = NULL; - } - if (ohci->ed_cache) { - dma_pool_destroy (ohci->ed_cache); - ohci->ed_cache = NULL; - } + dma_pool_destroy(ohci->td_cache); + ohci->td_cache = NULL; + dma_pool_destroy(ohci->ed_cache); + ohci->ed_cache = NULL; } /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ohci-sm501.c b/drivers/usb/host/ohci-sm501.c index c9233cddf9a2..c26228c25f99 100644 --- a/drivers/usb/host/ohci-sm501.c +++ b/drivers/usb/host/ohci-sm501.c @@ -126,8 +126,7 @@ static int ohci_hcd_sm501_drv_probe(struct platform_device *pdev) retval = dma_declare_coherent_memory(dev, mem->start, mem->start - mem->parent->start, - resource_size(mem), - DMA_MEMORY_EXCLUSIVE); + resource_size(mem)); if (retval) { dev_err(dev, "cannot declare coherent memory\n"); goto err1; diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c index a631dbb369d7..f88a0370659f 100644 --- a/drivers/usb/host/ohci-tmio.c +++ b/drivers/usb/host/ohci-tmio.c @@ -225,7 +225,7 @@ static int ohci_hcd_tmio_drv_probe(struct platform_device *dev) } ret = dma_declare_coherent_memory(&dev->dev, sram->start, sram->start, - resource_size(sram), DMA_MEMORY_EXCLUSIVE); + resource_size(sram)); if (ret) goto err_dma_declare; diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index c5e6e8d0b5ef..47c5515a9ce4 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -1323,7 +1323,7 @@ static struct list_head *qh_urb_transaction(struct oxu_hcd *oxu, } /* by default, enable interrupt on urb completion */ - qtd->hw_token |= cpu_to_le32(QTD_IOC); + qtd->hw_token |= cpu_to_le32(QTD_IOC); return head; cleanup: @@ -2253,16 +2253,12 @@ static void scan_periodic(struct oxu_hcd *oxu) for (;;) { union ehci_shadow q, *q_p; __le32 type, *hw_p; - unsigned uframes; /* don't scan past the live uframe */ frame = now_uframe >> 3; - if (frame == (clock >> 3)) - uframes = now_uframe & 0x07; - else { + if (frame != (clock >> 3)) { /* safe to scan the whole frame at once */ now_uframe |= 0x07; - uframes = 8; } restart: @@ -2832,7 +2828,6 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, { struct oxu_hcd *oxu = hcd_to_oxu(hcd); int num, rem; - int transfer_buffer_length; void *transfer_buffer; struct urb *murb; int i, ret; @@ -2843,7 +2838,6 @@ static int oxu_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, /* Otherwise we should verify the USB transfer buffer size! */ transfer_buffer = urb->transfer_buffer; - transfer_buffer_length = urb->transfer_buffer_length; num = urb->transfer_buffer_length / 4096; rem = urb->transfer_buffer_length % 4096; diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 984892dd72f5..42668aeca57c 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1979,6 +1979,8 @@ static int r8a66597_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, static void r8a66597_endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) +__acquires(r8a66597->lock) +__releases(r8a66597->lock) { struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); struct r8a66597_pipe *pipe = (struct r8a66597_pipe *)hep->hcpriv; @@ -1991,13 +1993,14 @@ static void r8a66597_endpoint_disable(struct usb_hcd *hcd, return; pipenum = pipe->info.pipenum; + spin_lock_irqsave(&r8a66597->lock, flags); if (pipenum == 0) { kfree(hep->hcpriv); hep->hcpriv = NULL; + spin_unlock_irqrestore(&r8a66597->lock, flags); return; } - spin_lock_irqsave(&r8a66597->lock, flags); pipe_stop(r8a66597, pipe); pipe_irq_disable(r8a66597, pipenum); disable_irq_empty(r8a66597, pipenum); diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c index 5b8a3d9530c4..6343fbacd244 100644 --- a/drivers/usb/host/u132-hcd.c +++ b/drivers/usb/host/u132-hcd.c @@ -2477,7 +2477,8 @@ static int u132_endp_urb_dequeue(struct u132 *u132, struct u132_endp *endp, spin_unlock_irqrestore(&endp->queue_lock.slock, irqs); kfree(urbq); - } urb->error_count = 0; + } + urb->error_count = 0; usb_hcd_giveback_urb(hcd, urb, status); return 0; } else if (list_empty(&endp->urb_more)) { @@ -2982,7 +2983,8 @@ static int u132_remove(struct platform_device *pdev) while (rings-- > 0) { struct u132_ring *ring = &u132->ring[rings]; u132_ring_cancel_work(u132, ring); - } while (endps-- > 0) { + } + while (endps-- > 0) { struct u132_endp *endp = u132->endp[endps]; if (endp) u132_endp_cancel_work(u132, endp); @@ -3202,6 +3204,9 @@ static int __init u132_hcd_init(void) printk(KERN_INFO "driver %s\n", hcd_name); workqueue = create_singlethread_workqueue("u132"); retval = platform_driver_register(&u132_platform_driver); + if (retval) + destroy_workqueue(workqueue); + return retval; } diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 6218bfe54f52..98deb5f64268 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -596,9 +596,9 @@ static int uhci_start(struct usb_hcd *hcd) &uhci_debug_operations); #endif - uhci->frame = dma_zalloc_coherent(uhci_dev(uhci), - UHCI_NUMFRAMES * sizeof(*uhci->frame), - &uhci->frame_dma_handle, GFP_KERNEL); + uhci->frame = dma_alloc_coherent(uhci_dev(uhci), + UHCI_NUMFRAMES * sizeof(*uhci->frame), + &uhci->frame_dma_handle, GFP_KERNEL); if (!uhci->frame) { dev_err(uhci_dev(uhci), "unable to allocate consistent memory for frame list\n"); diff --git a/drivers/usb/host/whci/Kbuild b/drivers/usb/host/whci/Makefile index 26df0138079e..859d20079df6 100644 --- a/drivers/usb/host/whci/Kbuild +++ b/drivers/usb/host/whci/Makefile @@ -1,3 +1,5 @@ +# SPDX-License-Identifier: GPL-2.0 + obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o whci-hcd-y := \ diff --git a/drivers/usb/host/xhci-dbgcap.c b/drivers/usb/host/xhci-dbgcap.c index 86cff5c28eff..d932cc31711e 100644 --- a/drivers/usb/host/xhci-dbgcap.c +++ b/drivers/usb/host/xhci-dbgcap.c @@ -181,7 +181,7 @@ static void xhci_dbc_flush_endpoint_requests(struct dbc_ep *dep) xhci_dbc_flush_single_request(req); } -static void xhci_dbc_flush_reqests(struct xhci_dbc *dbc) +static void xhci_dbc_flush_requests(struct xhci_dbc *dbc) { xhci_dbc_flush_endpoint_requests(&dbc->eps[BULK_OUT]); xhci_dbc_flush_endpoint_requests(&dbc->eps[BULK_IN]); @@ -516,7 +516,6 @@ static int xhci_do_dbc_stop(struct xhci_hcd *xhci) return -1; writel(0, &dbc->regs->control); - xhci_dbc_mem_cleanup(xhci); dbc->state = DS_DISABLED; return 0; @@ -562,8 +561,10 @@ static void xhci_dbc_stop(struct xhci_hcd *xhci) ret = xhci_do_dbc_stop(xhci); spin_unlock_irqrestore(&dbc->lock, flags); - if (!ret) + if (!ret) { + xhci_dbc_mem_cleanup(xhci); pm_runtime_put_sync(xhci_to_hcd(xhci)->self.controller); + } } static void @@ -687,7 +688,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc) !(portsc & DBC_PORTSC_CONN_STATUS)) { xhci_info(xhci, "DbC cable unplugged\n"); dbc->state = DS_ENABLED; - xhci_dbc_flush_reqests(dbc); + xhci_dbc_flush_requests(dbc); return EVT_DISC; } @@ -697,7 +698,7 @@ static enum evtreturn xhci_dbc_do_handle_events(struct xhci_dbc *dbc) xhci_info(xhci, "DbC port reset\n"); writel(portsc, &dbc->regs->portsc); dbc->state = DS_ENABLED; - xhci_dbc_flush_reqests(dbc); + xhci_dbc_flush_requests(dbc); return EVT_DISC; } diff --git a/drivers/usb/host/xhci-debugfs.h b/drivers/usb/host/xhci-debugfs.h index ac5bc40f5c3a..f7a4e2492b00 100644 --- a/drivers/usb/host/xhci-debugfs.h +++ b/drivers/usb/host/xhci-debugfs.h @@ -80,7 +80,6 @@ struct xhci_regset { char name[DEBUGFS_NAMELEN]; struct debugfs_regset32 regset; size_t nregs; - struct dentry *parent; struct list_head list; }; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 01b5818a4be5..96a740543183 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -714,13 +714,6 @@ void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, } } -/* Updates Link Status for USB 2.1 port */ -static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg) -{ - if ((status_reg & PORT_PLS_MASK) == XDEV_U2) - *status |= USB_PORT_STAT_L1; -} - /* Updates Link Status for super Speed port */ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, u32 *status, u32 status_reg) @@ -802,6 +795,100 @@ static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, } } +static int xhci_handle_usb2_port_link_resume(struct xhci_port *port, + u32 *status, u32 portsc, + unsigned long flags) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + int slot_id; + u32 wIndex; + + hcd = port->rhub->hcd; + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(hcd); + wIndex = port->hcd_portnum; + + if ((portsc & PORT_RESET) || !(portsc & PORT_PE)) { + *status = 0xffffffff; + return -EINVAL; + } + /* did port event handler already start resume timing? */ + if (!bus_state->resume_done[wIndex]) { + /* If not, maybe we are in a host initated resume? */ + if (test_bit(wIndex, &bus_state->resuming_ports)) { + /* Host initated resume doesn't time the resume + * signalling using resume_done[]. + * It manually sets RESUME state, sleeps 20ms + * and sets U0 state. This should probably be + * changed, but not right now. + */ + } else { + /* port resume was discovered now and here, + * start resume timing + */ + unsigned long timeout = jiffies + + msecs_to_jiffies(USB_RESUME_TIMEOUT); + + set_bit(wIndex, &bus_state->resuming_ports); + bus_state->resume_done[wIndex] = timeout; + mod_timer(&hcd->rh_timer, timeout); + usb_hcd_start_port_resume(&hcd->self, wIndex); + } + /* Has resume been signalled for USB_RESUME_TIME yet? */ + } else if (time_after_eq(jiffies, bus_state->resume_done[wIndex])) { + int time_left; + + xhci_dbg(xhci, "Resume USB2 port %d\n", wIndex + 1); + bus_state->resume_done[wIndex] = 0; + clear_bit(wIndex, &bus_state->resuming_ports); + + set_bit(wIndex, &bus_state->rexit_ports); + + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); + + spin_unlock_irqrestore(&xhci->lock, flags); + time_left = wait_for_completion_timeout( + &bus_state->rexit_done[wIndex], + msecs_to_jiffies(XHCI_MAX_REXIT_TIMEOUT_MS)); + spin_lock_irqsave(&xhci->lock, flags); + + if (time_left) { + slot_id = xhci_find_slot_id_by_port(hcd, xhci, + wIndex + 1); + if (!slot_id) { + xhci_dbg(xhci, "slot_id is zero\n"); + *status = 0xffffffff; + return -ENODEV; + } + xhci_ring_device(xhci, slot_id); + } else { + int port_status = readl(port->addr); + + xhci_warn(xhci, "Port resume %i msec timed out, portsc = 0x%x\n", + XHCI_MAX_REXIT_TIMEOUT_MS, + port_status); + *status |= USB_PORT_STAT_SUSPEND; + clear_bit(wIndex, &bus_state->rexit_ports); + } + + usb_hcd_end_port_resume(&hcd->self, wIndex); + bus_state->port_c_suspend |= 1 << wIndex; + bus_state->suspended_ports &= ~(1 << wIndex); + } else { + /* + * The resume has been signaling for less than + * USB_RESUME_TIME. Report the port status as SUSPEND, + * let the usbcore check port status again and clear + * resume signaling later. + */ + *status |= USB_PORT_STAT_SUSPEND; + } + return 0; +} + static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) { u32 ext_stat = 0; @@ -818,6 +905,85 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) return ext_stat; } +static void xhci_get_usb3_port_status(struct xhci_port *port, u32 *status, + u32 portsc) +{ + struct xhci_bus_state *bus_state; + struct xhci_hcd *xhci; + u32 link_state; + u32 portnum; + + bus_state = &port->rhub->bus_state; + xhci = hcd_to_xhci(port->rhub->hcd); + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB3 specific wPortChange bits + * + * Port link change with port in resume state should not be + * reported to usbcore, as this is an internal state to be + * handled by xhci driver. Reporting PLC to usbcore may + * cause usbcore clearing PLC first and port change event + * irq won't be generated. + */ + + if (portsc & PORT_PLC && (link_state != XDEV_RESUME)) + *status |= USB_PORT_STAT_C_LINK_STATE << 16; + if (portsc & PORT_WRC) + *status |= USB_PORT_STAT_C_BH_RESET << 16; + if (portsc & PORT_CEC) + *status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; + + /* USB3 specific wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_SS_PORT_STAT_POWER; + /* link state handling */ + if (link_state == XDEV_U0) + bus_state->suspended_ports &= ~(1 << portnum); + } + + xhci_hub_report_usb3_link_state(xhci, status, portsc); + xhci_del_comp_mod_timer(xhci, portsc, portnum); +} + +static void xhci_get_usb2_port_status(struct xhci_port *port, u32 *status, + u32 portsc, unsigned long flags) +{ + struct xhci_bus_state *bus_state; + u32 link_state; + u32 portnum; + int ret; + + bus_state = &port->rhub->bus_state; + link_state = portsc & PORT_PLS_MASK; + portnum = port->hcd_portnum; + + /* USB2 wPortStatus bits */ + if (portsc & PORT_POWER) { + *status |= USB_PORT_STAT_POWER; + + /* link state is only valid if port is powered */ + if (link_state == XDEV_U3) + *status |= USB_PORT_STAT_SUSPEND; + if (link_state == XDEV_U2) + *status |= USB_PORT_STAT_L1; + if (link_state == XDEV_U0) { + bus_state->resume_done[portnum] = 0; + clear_bit(portnum, &bus_state->resuming_ports); + if (bus_state->suspended_ports & (1 << portnum)) { + bus_state->suspended_ports &= ~(1 << portnum); + bus_state->port_c_suspend |= 1 << portnum; + } + } + if (link_state == XDEV_RESUME) { + ret = xhci_handle_usb2_port_link_resume(port, status, + portsc, flags); + if (ret) + return; + } + } +} + /* * Converts a raw xHCI port status into the format that external USB 2.0 or USB * 3.0 hubs use. @@ -835,16 +1001,14 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, __releases(&xhci->lock) __acquires(&xhci->lock) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; - int slot_id; struct xhci_hub *rhub; struct xhci_port *port; rhub = xhci_get_rhub(hcd); port = rhub->ports[wIndex]; - /* wPortChange bits */ + /* common wPortChange bits */ if (raw_port_status & PORT_CSC) status |= USB_PORT_STAT_C_CONNECTION << 16; if (raw_port_status & PORT_PEC) @@ -853,107 +1017,25 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, status |= USB_PORT_STAT_C_OVERCURRENT << 16; if ((raw_port_status & PORT_RC)) status |= USB_PORT_STAT_C_RESET << 16; - /* USB3.0 only */ - if (hcd->speed >= HCD_USB3) { - /* Port link change with port in resume state should not be - * reported to usbcore, as this is an internal state to be - * handled by xhci driver. Reporting PLC to usbcore may - * cause usbcore clearing PLC first and port change event - * irq won't be generated. - */ - if ((raw_port_status & PORT_PLC) && - (raw_port_status & PORT_PLS_MASK) != XDEV_RESUME) - status |= USB_PORT_STAT_C_LINK_STATE << 16; - if ((raw_port_status & PORT_WRC)) - status |= USB_PORT_STAT_C_BH_RESET << 16; - if ((raw_port_status & PORT_CEC)) - status |= USB_PORT_STAT_C_CONFIG_ERROR << 16; - } - if (hcd->speed < HCD_USB3) { - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U3 - && (raw_port_status & PORT_POWER)) - status |= USB_PORT_STAT_SUSPEND; + /* common wPortStatus bits */ + if (raw_port_status & PORT_CONNECT) { + status |= USB_PORT_STAT_CONNECTION; + status |= xhci_port_speed(raw_port_status); } - if ((raw_port_status & PORT_PLS_MASK) == XDEV_RESUME && - !DEV_SUPERSPEED_ANY(raw_port_status) && hcd->speed < HCD_USB3) { - if ((raw_port_status & PORT_RESET) || - !(raw_port_status & PORT_PE)) - return 0xffffffff; - /* did port event handler already start resume timing? */ - if (!bus_state->resume_done[wIndex]) { - /* If not, maybe we are in a host initated resume? */ - if (test_bit(wIndex, &bus_state->resuming_ports)) { - /* Host initated resume doesn't time the resume - * signalling using resume_done[]. - * It manually sets RESUME state, sleeps 20ms - * and sets U0 state. This should probably be - * changed, but not right now. - */ - } else { - /* port resume was discovered now and here, - * start resume timing - */ - unsigned long timeout = jiffies + - msecs_to_jiffies(USB_RESUME_TIMEOUT); - - set_bit(wIndex, &bus_state->resuming_ports); - bus_state->resume_done[wIndex] = timeout; - mod_timer(&hcd->rh_timer, timeout); - usb_hcd_start_port_resume(&hcd->self, wIndex); - } - /* Has resume been signalled for USB_RESUME_TIME yet? */ - } else if (time_after_eq(jiffies, - bus_state->resume_done[wIndex])) { - int time_left; - - xhci_dbg(xhci, "Resume USB2 port %d\n", - wIndex + 1); - bus_state->resume_done[wIndex] = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - - set_bit(wIndex, &bus_state->rexit_ports); - - xhci_test_and_clear_bit(xhci, port, PORT_PLC); - xhci_set_link_state(xhci, port, XDEV_U0); - - spin_unlock_irqrestore(&xhci->lock, flags); - time_left = wait_for_completion_timeout( - &bus_state->rexit_done[wIndex], - msecs_to_jiffies( - XHCI_MAX_REXIT_TIMEOUT_MS)); - spin_lock_irqsave(&xhci->lock, flags); - - if (time_left) { - slot_id = xhci_find_slot_id_by_port(hcd, - xhci, wIndex + 1); - if (!slot_id) { - xhci_dbg(xhci, "slot_id is zero\n"); - return 0xffffffff; - } - xhci_ring_device(xhci, slot_id); - } else { - int port_status = readl(port->addr); - xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", - XHCI_MAX_REXIT_TIMEOUT_MS, - port_status); - status |= USB_PORT_STAT_SUSPEND; - clear_bit(wIndex, &bus_state->rexit_ports); - } + if (raw_port_status & PORT_PE) + status |= USB_PORT_STAT_ENABLE; + if (raw_port_status & PORT_OC) + status |= USB_PORT_STAT_OVERCURRENT; + if (raw_port_status & PORT_RESET) + status |= USB_PORT_STAT_RESET; - usb_hcd_end_port_resume(&hcd->self, wIndex); - bus_state->port_c_suspend |= 1 << wIndex; - bus_state->suspended_ports &= ~(1 << wIndex); - } else { - /* - * The resume has been signaling for less than - * USB_RESUME_TIME. Report the port status as SUSPEND, - * let the usbcore check port status again and clear - * resume signaling later. - */ - status |= USB_PORT_STAT_SUSPEND; - } - } + /* USB2 and USB3 specific bits, including Port Link State */ + if (hcd->speed >= HCD_USB3) + xhci_get_usb3_port_status(port, &status, raw_port_status); + else + xhci_get_usb2_port_status(port, &status, raw_port_status, + flags); /* * Clear stale usb2 resume signalling variables in case port changed * state during resume signalling. For example on error @@ -967,44 +1049,6 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, usb_hcd_end_port_resume(&hcd->self, wIndex); } - - if ((raw_port_status & PORT_PLS_MASK) == XDEV_U0 && - (raw_port_status & PORT_POWER)) { - if (bus_state->suspended_ports & (1 << wIndex)) { - bus_state->suspended_ports &= ~(1 << wIndex); - if (hcd->speed < HCD_USB3) - bus_state->port_c_suspend |= 1 << wIndex; - } - bus_state->resume_done[wIndex] = 0; - clear_bit(wIndex, &bus_state->resuming_ports); - } - if (raw_port_status & PORT_CONNECT) { - status |= USB_PORT_STAT_CONNECTION; - status |= xhci_port_speed(raw_port_status); - } - if (raw_port_status & PORT_PE) - status |= USB_PORT_STAT_ENABLE; - if (raw_port_status & PORT_OC) - status |= USB_PORT_STAT_OVERCURRENT; - if (raw_port_status & PORT_RESET) - status |= USB_PORT_STAT_RESET; - if (raw_port_status & PORT_POWER) { - if (hcd->speed >= HCD_USB3) - status |= USB_SS_PORT_STAT_POWER; - else - status |= USB_PORT_STAT_POWER; - } - /* Update Port Link State */ - if (hcd->speed >= HCD_USB3) { - xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status); - /* - * Verify if all USB3 Ports Have entered U0 already. - * Delete Compliance Mode Timer if so. - */ - xhci_del_comp_mod_timer(xhci, raw_port_status, wIndex); - } else { - xhci_hub_report_usb2_link_state(&status, raw_port_status); - } if (bus_state->port_c_suspend & (1 << wIndex)) status |= USB_PORT_STAT_C_SUSPEND << 16; @@ -1031,7 +1075,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; spin_lock_irqsave(&xhci->lock, flags); switch (typeReq) { @@ -1421,7 +1465,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; /* Initial status is no changes */ retval = (max_ports + 8) / 8; @@ -1480,7 +1524,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; wake_enabled = hcd->self.root_hub->do_remote_wakeup; spin_lock_irqsave(&xhci->lock, flags); @@ -1501,20 +1545,25 @@ int xhci_bus_suspend(struct usb_hcd *hcd) port_index = max_ports; while (port_index--) { u32 t1, t2; - + int retries = 10; +retry: t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); portsc_buf[port_index] = 0; - /* Bail out if a USB3 port has a new device in link training */ - if ((hcd->speed >= HCD_USB3) && + /* + * Give a USB3 port in link training time to finish, but don't + * prevent suspend as port might be stuck + */ + if ((hcd->speed >= HCD_USB3) && retries-- && (t1 & PORT_PLS_MASK) == XDEV_POLLING) { - bus_state->bus_suspended = 0; spin_unlock_irqrestore(&xhci->lock, flags); - xhci_dbg(xhci, "Bus suspend bailout, port in polling\n"); - return -EBUSY; + msleep(XHCI_PORT_POLLING_LFPS_TIME); + spin_lock_irqsave(&xhci->lock, flags); + xhci_dbg(xhci, "port %d polling in bus suspend, waiting\n", + port_index); + goto retry; } - /* suspend ports in U0, or bail out for new connect changes */ if ((t1 & PORT_PE) && (t1 & PORT_PLS_MASK) == XDEV_U0) { if ((t1 & PORT_CSC) && wake_enabled) { @@ -1623,7 +1672,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) rhub = xhci_get_rhub(hcd); ports = rhub->ports; max_ports = rhub->num_ports; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &rhub->bus_state; if (time_before(jiffies, bus_state->next_statechange)) msleep(5); @@ -1724,13 +1773,10 @@ int xhci_bus_resume(struct usb_hcd *hcd) unsigned long xhci_get_resuming_ports(struct usb_hcd *hcd) { - struct xhci_hcd *xhci = hcd_to_xhci(hcd); - struct xhci_bus_state *bus_state; - - bus_state = &xhci->bus_state[hcd_index(hcd)]; + struct xhci_hub *rhub = xhci_get_rhub(hcd); /* USB3 port wakeups are reported via usb_wakeup_notification() */ - return bus_state->resuming_ports; /* USB2 ports only */ + return rhub->bus_state.resuming_ports; /* USB2 ports only */ } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index b1f27aa38b10..cf5e17962179 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -933,7 +933,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id) * that tt_info, then free the child first. Recursive. * We can't rely on udev at this point to find child-parent relationships. */ -void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id) +static void xhci_free_virt_devices_depth_first(struct xhci_hcd *xhci, int slot_id) { struct xhci_virt_device *vdev; struct list_head *tt_list_head; @@ -1672,8 +1672,8 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags) xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma); for (i = 0; i < num_sp; i++) { dma_addr_t dma; - void *buf = dma_zalloc_coherent(dev, xhci->page_size, &dma, - flags); + void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma, + flags); if (!buf) goto fail_sp4; @@ -1799,8 +1799,8 @@ int xhci_alloc_erst(struct xhci_hcd *xhci, struct xhci_erst_entry *entry; size = sizeof(struct xhci_erst_entry) * evt_ring->num_segs; - erst->entries = dma_zalloc_coherent(xhci_to_hcd(xhci)->self.sysdev, - size, &erst->erst_dma_addr, flags); + erst->entries = dma_alloc_coherent(xhci_to_hcd(xhci)->self.sysdev, + size, &erst->erst_dma_addr, flags); if (!erst->entries) return -ENOMEM; @@ -1922,8 +1922,8 @@ no_bw: xhci->page_size = 0; xhci->page_shift = 0; - xhci->bus_state[0].bus_suspended = 0; - xhci->bus_state[1].bus_suspended = 0; + xhci->usb2_rhub.bus_state.bus_suspended = 0; + xhci->usb3_rhub.bus_state.bus_suspended = 0; } static int xhci_test_trb_in_td(struct xhci_hcd *xhci, @@ -2181,23 +2181,11 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports, if (major_revision < 0x03 && xhci->num_ext_caps < max_caps) xhci->ext_caps[xhci->num_ext_caps++] = temp; - /* Check the host's USB2 LPM capability */ - if ((xhci->hci_version == 0x96) && (major_revision != 0x03) && - (temp & XHCI_L1C)) { + if ((xhci->hci_version >= 0x100) && (major_revision != 0x03) && + (temp & XHCI_HLC)) { xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 0.96: support USB2 software lpm"); - xhci->sw_lpm_support = 1; - } - - if ((xhci->hci_version >= 0x100) && (major_revision != 0x03)) { - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 1.0: support USB2 software lpm"); - xhci->sw_lpm_support = 1; - if (temp & XHCI_HLC) { - xhci_dbg_trace(xhci, trace_xhci_dbg_init, - "xHCI 1.0: support USB2 hardware lpm"); - xhci->hw_lpm_support = 1; - } + "xHCI 1.0: support USB2 hardware lpm"); + xhci->hw_lpm_support = 1; } port_offset--; @@ -2536,10 +2524,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) for (i = 0; i < MAX_HC_SLOTS; i++) xhci->devs[i] = NULL; for (i = 0; i < USB_MAXCHILDREN; i++) { - xhci->bus_state[0].resume_done[i] = 0; - xhci->bus_state[1].resume_done[i] = 0; + xhci->usb2_rhub.bus_state.resume_done[i] = 0; + xhci->usb3_rhub.bus_state.resume_done[i] = 0; /* Only the USB 2.0 completions will ever be used. */ - init_completion(&xhci->bus_state[1].rexit_done[i]); + init_completion(&xhci->usb2_rhub.bus_state.rexit_done[i]); } if (scratchpad_alloc(xhci, flags)) diff --git a/drivers/usb/host/xhci-mvebu.c b/drivers/usb/host/xhci-mvebu.c index 32e158568788..60651a50770f 100644 --- a/drivers/usb/host/xhci-mvebu.c +++ b/drivers/usb/host/xhci-mvebu.c @@ -13,6 +13,7 @@ #include <linux/usb/hcd.h> #include "xhci-mvebu.h" +#include "xhci.h" #define USB3_MAX_WINDOWS 4 #define USB3_WIN_CTRL(w) (0x0 + ((w) * 8)) @@ -72,3 +73,13 @@ int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) return 0; } + +int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + /* Without reset on resume, the HC won't work at all */ + xhci->quirks |= XHCI_RESET_ON_RESUME; + + return 0; +} diff --git a/drivers/usb/host/xhci-mvebu.h b/drivers/usb/host/xhci-mvebu.h index 09791df2cec0..ca0a3a5721dd 100644 --- a/drivers/usb/host/xhci-mvebu.h +++ b/drivers/usb/host/xhci-mvebu.h @@ -12,10 +12,16 @@ struct usb_hcd; #if IS_ENABLED(CONFIG_USB_XHCI_MVEBU) int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd); +int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd); #else static inline int xhci_mvebu_mbus_init_quirk(struct usb_hcd *hcd) { return 0; } + +static inline int xhci_mvebu_a3700_init_quirk(struct usb_hcd *hcd) +{ + return 0; +} #endif #endif /* __LINUX_XHCI_MVEBU_H */ diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index a9ec7051f286..c2fe218e051f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -194,6 +194,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_SSIC_PORT_UNUSED; if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI || + pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) xhci->quirks |= XHCI_INTEL_USB_ROLE_SW; if (pdev->vendor == PCI_VENDOR_ID_INTEL && diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index ef09cb06212f..0ac4ec975547 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -98,6 +98,10 @@ static const struct xhci_plat_priv xhci_plat_marvell_armada = { .init_quirk = xhci_mvebu_mbus_init_quirk, }; +static const struct xhci_plat_priv xhci_plat_marvell_armada3700 = { + .init_quirk = xhci_mvebu_a3700_init_quirk, +}; + static const struct xhci_plat_priv xhci_plat_renesas_rcar_gen2 = { .firmware_name = XHCI_RCAR_FIRMWARE_NAME_V1, .init_quirk = xhci_rcar_init_quirk, @@ -124,6 +128,9 @@ static const struct of_device_id usb_xhci_of_match[] = { .compatible = "marvell,armada-380-xhci", .data = &xhci_plat_marvell_armada, }, { + .compatible = "marvell,armada3700-xhci", + .data = &xhci_plat_marvell_armada3700, + }, { .compatible = "renesas,xhci-r8a7790", .data = &xhci_plat_renesas_rcar_gen2, }, { diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index a6e463715779..671bce18782c 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -246,6 +246,7 @@ int xhci_rcar_init_quirk(struct usb_hcd *hcd) if (!xhci_rcar_wait_for_pll_active(hcd)) return -ETIMEDOUT; + xhci->quirks |= XHCI_TRUST_TX_LENGTH; return xhci_rcar_download_firmware(hcd); } diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 65750582133f..9215a28dad40 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1593,7 +1593,7 @@ static void handle_port_status(struct xhci_hcd *xhci, } hcd = port->rhub->hcd; - bus_state = &xhci->bus_state[hcd_index(hcd)]; + bus_state = &port->rhub->bus_state; hcd_portnum = port->hcd_portnum; portsc = readl(port->addr); @@ -1647,10 +1647,13 @@ static void handle_port_status(struct xhci_hcd *xhci, } } - if ((portsc & PORT_PLC) && (portsc & PORT_PLS_MASK) == XDEV_U0 && - DEV_SUPERSPEED_ANY(portsc)) { + if ((portsc & PORT_PLC) && + DEV_SUPERSPEED_ANY(portsc) && + ((portsc & PORT_PLS_MASK) == XDEV_U0 || + (portsc & PORT_PLS_MASK) == XDEV_U1 || + (portsc & PORT_PLS_MASK) == XDEV_U2)) { xhci_dbg(xhci, "resume SS port %d finished\n", port_id); - /* We've just brought the device into U0 through either the + /* We've just brought the device into U0/1/2 through either the * Resume state after a device remote wakeup, or through the * U3Exit state after a host-initiated resume. If it's a device * initiated remote wake, don't pass up the link state change, diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c index 938ff06c0349..efb0cad8710e 100644 --- a/drivers/usb/host/xhci-tegra.c +++ b/drivers/usb/host/xhci-tegra.c @@ -941,9 +941,9 @@ static void tegra_xusb_powerdomain_remove(struct device *dev, device_link_del(tegra->genpd_dl_ss); if (tegra->genpd_dl_host) device_link_del(tegra->genpd_dl_host); - if (tegra->genpd_dev_ss) + if (!IS_ERR_OR_NULL(tegra->genpd_dev_ss)) dev_pm_domain_detach(tegra->genpd_dev_ss, true); - if (tegra->genpd_dev_host) + if (!IS_ERR_OR_NULL(tegra->genpd_dev_host)) dev_pm_domain_detach(tegra->genpd_dev_host, true); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index dae3be1b9c8f..7fa58c99f126 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -169,7 +169,7 @@ int xhci_reset(struct xhci_hcd *xhci) { u32 command; u32 state; - int ret, i; + int ret; state = readl(&xhci->op_regs->status); @@ -215,11 +215,12 @@ int xhci_reset(struct xhci_hcd *xhci) ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, 10 * 1000 * 1000); - for (i = 0; i < 2; i++) { - xhci->bus_state[i].port_c_suspend = 0; - xhci->bus_state[i].suspended_ports = 0; - xhci->bus_state[i].resuming_ports = 0; - } + xhci->usb2_rhub.bus_state.port_c_suspend = 0; + xhci->usb2_rhub.bus_state.suspended_ports = 0; + xhci->usb2_rhub.bus_state.resuming_ports = 0; + xhci->usb3_rhub.bus_state.port_c_suspend = 0; + xhci->usb3_rhub.bus_state.suspended_ports = 0; + xhci->usb3_rhub.bus_state.resuming_ports = 0; return ret; } @@ -244,7 +245,7 @@ static void xhci_zero_64b_regs(struct xhci_hcd *xhci) * an iommu. Doing anything when there is no iommu is definitely * unsafe... */ - if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !dev->iommu_group) + if (!(xhci->quirks & XHCI_ZERO_64B_REGS) || !device_iommu_mapped(dev)) return; xhci_info(xhci, "Zeroing 64bit base registers, expecting fault\n"); @@ -1087,9 +1088,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Wait a bit if either of the roothubs need to settle from the * transition into bus suspend. */ - if (time_before(jiffies, xhci->bus_state[0].next_statechange) || - time_before(jiffies, - xhci->bus_state[1].next_statechange)) + + if (time_before(jiffies, xhci->usb2_rhub.bus_state.next_statechange) || + time_before(jiffies, xhci->usb3_rhub.bus_state.next_statechange)) msleep(100); set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); @@ -1454,8 +1455,7 @@ static int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flag else num_tds = 1; - urb_priv = kzalloc(sizeof(struct urb_priv) + - num_tds * sizeof(struct xhci_td), mem_flags); + urb_priv = kzalloc(struct_size(urb_priv, td, num_tds), mem_flags); if (!urb_priv) return -ENOMEM; @@ -4388,8 +4388,7 @@ static int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_hcd *xhci = hcd_to_xhci(hcd); int portnum = udev->portnum - 1; - if (hcd->speed >= HCD_USB3 || !xhci->sw_lpm_support || - !udev->lpm_capable) + if (hcd->speed >= HCD_USB3 || !udev->lpm_capable) return 0; /* we only support lpm for non-hub device connected to root hub yet */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 011dd45f8718..9334cdee382a 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -452,6 +452,14 @@ struct xhci_op_regs { */ #define XHCI_DEFAULT_BESL 4 +/* + * USB3 specification define a 360ms tPollingLFPSTiemout for USB3 ports + * to complete link training. usually link trainig completes much faster + * so check status 10 times with 36ms sleep in places we need to wait for + * polling to complete. + */ +#define XHCI_PORT_POLLING_LFPS_TIME 36 + /** * struct xhci_intr_reg - Interrupt Register Set * @irq_pending: IMAN - Interrupt Management Register. Used to enable @@ -1682,13 +1690,6 @@ struct xhci_bus_state { */ #define XHCI_MAX_REXIT_TIMEOUT_MS 20 -static inline unsigned int hcd_index(struct usb_hcd *hcd) -{ - if (hcd->speed >= HCD_USB3) - return 0; - else - return 1; -} struct xhci_port { __le32 __iomem *addr; int hw_portnum; @@ -1700,6 +1701,8 @@ struct xhci_hub { struct xhci_port **ports; unsigned int num_ports; struct usb_hcd *hcd; + /* keep track of bus suspend info */ + struct xhci_bus_state bus_state; /* supported prococol extended capabiliy values */ u8 maj_rev; u8 min_rev; @@ -1854,13 +1857,9 @@ struct xhci_hcd { unsigned int num_active_eps; unsigned int limit_active_eps; - /* There are two roothubs to keep track of bus suspend info for */ - struct xhci_bus_state bus_state[2]; struct xhci_port *hw_ports; struct xhci_hub usb2_rhub; struct xhci_hub usb3_rhub; - /* support xHCI 0.96 spec USB2 software LPM */ - unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; /* Broken Suspend flag for SNPS Suspend resume issue */ |