summaryrefslogtreecommitdiff
path: root/drivers/usb/mtu3
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/mtu3')
-rw-r--r--drivers/usb/mtu3/mtu3.h59
-rw-r--r--drivers/usb/mtu3/mtu3_core.c72
-rw-r--r--drivers/usb/mtu3/mtu3_dr.c72
-rw-r--r--drivers/usb/mtu3/mtu3_dr.h17
-rw-r--r--drivers/usb/mtu3/mtu3_gadget.c14
-rw-r--r--drivers/usb/mtu3/mtu3_gadget_ep0.c27
-rw-r--r--drivers/usb/mtu3/mtu3_host.c89
-rw-r--r--drivers/usb/mtu3/mtu3_hw_regs.h24
-rw-r--r--drivers/usb/mtu3/mtu3_plat.c176
-rw-r--r--drivers/usb/mtu3/mtu3_qmu.c113
-rw-r--r--drivers/usb/mtu3/mtu3_qmu.h11
11 files changed, 369 insertions, 305 deletions
diff --git a/drivers/usb/mtu3/mtu3.h b/drivers/usb/mtu3/mtu3.h
index b26fffc58446..3c888d942a9f 100644
--- a/drivers/usb/mtu3/mtu3.h
+++ b/drivers/usb/mtu3/mtu3.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3.h - MediaTek USB3 DRD header
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#ifndef __MTU3_H__
@@ -46,6 +37,9 @@ struct mtu3_request;
#define MU3D_EP_RXCR1(epnum) (U3D_RX1CSR1 + (((epnum) - 1) * 0x10))
#define MU3D_EP_RXCR2(epnum) (U3D_RX1CSR2 + (((epnum) - 1) * 0x10))
+#define USB_QMU_TQHIAR(epnum) (U3D_TXQHIAR1 + (((epnum) - 1) * 0x4))
+#define USB_QMU_RQHIAR(epnum) (U3D_RXQHIAR1 + (((epnum) - 1) * 0x4))
+
#define USB_QMU_RQCSR(epnum) (U3D_RXQCSR1 + (((epnum) - 1) * 0x10))
#define USB_QMU_RQSAR(epnum) (U3D_RXQSAR1 + (((epnum) - 1) * 0x10))
#define USB_QMU_RQCPR(epnum) (U3D_RXQCPR1 + (((epnum) - 1) * 0x10))
@@ -91,6 +85,7 @@ enum mtu3_speed {
MTU3_SPEED_FULL = 1,
MTU3_SPEED_HIGH = 3,
MTU3_SPEED_SUPER = 4,
+ MTU3_SPEED_SUPER_PLUS = 5,
};
/**
@@ -112,6 +107,19 @@ enum mtu3_g_ep0_state {
};
/**
+ * MTU3_DR_FORCE_NONE: automatically switch host and periperal mode
+ * by IDPIN signal.
+ * MTU3_DR_FORCE_HOST: force to enter host mode and override OTG
+ * IDPIN signal.
+ * MTU3_DR_FORCE_DEVICE: force to enter peripheral mode.
+ */
+enum mtu3_dr_force_mode {
+ MTU3_DR_FORCE_NONE = 0,
+ MTU3_DR_FORCE_HOST,
+ MTU3_DR_FORCE_DEVICE,
+};
+
+/**
* @base: the base address of fifo
* @limit: the bitmap size in bits
* @bitmap: fifo bitmap in unit of @MTU3_EP_FIFO_UNIT
@@ -138,23 +146,33 @@ struct mtu3_fifo_info {
* Checksum value is calculated over the 16 bytes of the GPD by default;
* @data_buf_len (RX ONLY): This value indicates the length of
* the assigned data buffer
+ * @tx_ext_addr (TX ONLY): [3:0] are 4 extension bits of @buffer,
+ * [7:4] are 4 extension bits of @next_gpd
* @next_gpd: Physical address of the next GPD
* @buffer: Physical address of the data buffer
* @buf_len:
* (TX): This value indicates the length of the assigned data buffer
* (RX): The total length of data received
* @ext_len: reserved
+ * @rx_ext_addr(RX ONLY): [3:0] are 4 extension bits of @buffer,
+ * [7:4] are 4 extension bits of @next_gpd
* @ext_flag:
* bit5 (TX ONLY): Zero Length Packet (ZLP),
*/
struct qmu_gpd {
__u8 flag;
__u8 chksum;
- __le16 data_buf_len;
+ union {
+ __le16 data_buf_len;
+ __le16 tx_ext_addr;
+ };
__le32 next_gpd;
__le32 buffer;
__le16 buf_len;
- __u8 ext_len;
+ union {
+ __u8 ext_len;
+ __u8 rx_ext_addr;
+ };
__u8 ext_flag;
} __packed;
@@ -183,7 +201,6 @@ struct mtu3_gpd_ring {
* xHCI driver initialization, it's necessary for system bootup
* as device.
* @is_u3_drd: whether port0 supports usb3.0 dual-role device or not
-* @id_*: used to maually switch between host and device modes by idpin
* @manual_drd_enabled: it's true when supports dual-role device by debugfs
* to switch host/device modes depending on user input.
*/
@@ -194,10 +211,6 @@ struct otg_switch_mtk {
struct notifier_block id_nb;
struct delayed_work extcon_reg_dwork;
bool is_u3_drd;
- /* dual-role switch by debugfs */
- struct pinctrl *id_pinctrl;
- struct pinctrl_state *id_float;
- struct pinctrl_state *id_ground;
bool manual_drd_enabled;
};
@@ -206,14 +219,17 @@ struct otg_switch_mtk {
* @ippc_base: register base address of IP Power and Clock interface (IPPC)
* @vusb33: usb3.3V shared by device/host IP
* @sys_clk: system clock of mtu3, shared by device/host IP
+ * @ref_clk: reference clock
+ * @mcu_clk: mcu_bus_ck clock for AHB bus etc
+ * @dma_clk: dma_bus_ck clock for AXI bus etc
* @dr_mode: works in which mode:
* host only, device only or dual-role mode
* @u2_ports: number of usb2.0 host ports
* @u3_ports: number of usb3.0 host ports
+ * @u3p_dis_msk: mask of disabling usb3 ports, for example, bit0==1 to
+ * disable u3port0, bit1==1 to disable u3port1,... etc
* @dbgfs_root: only used when supports manual dual-role switch via debugfs
* @wakeup_en: it's true when supports remote wakeup in host mode
- * @wk_deb_p0: port0's wakeup debounce clock
- * @wk_deb_p1: it's optional, and depends on port1 is supported or not
*/
struct ssusb_mtk {
struct device *dev;
@@ -226,17 +242,18 @@ struct ssusb_mtk {
struct regulator *vusb33;
struct clk *sys_clk;
struct clk *ref_clk;
+ struct clk *mcu_clk;
+ struct clk *dma_clk;
/* otg */
struct otg_switch_mtk otg_switch;
enum usb_dr_mode dr_mode;
bool is_host;
int u2_ports;
int u3_ports;
+ int u3p_dis_msk;
struct dentry *dbgfs_root;
/* usb wakeup for host mode */
bool wakeup_en;
- struct clk *wk_deb_p0;
- struct clk *wk_deb_p1;
struct regmap *pericfg;
};
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index 99c65b0788ff..b1b99a8f6a7a 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_core.c - hardware access layer and gadget init/exit of
* MediaTek usb3 Dual-Role Controller Driver
@@ -5,18 +6,9 @@
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
+#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_address.h>
@@ -114,7 +106,9 @@ static int mtu3_device_enable(struct mtu3 *mtu)
mtu3_clrbits(ibase, SSUSB_U2_CTRL(0),
(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
SSUSB_U2_PORT_HOST_SEL));
- mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
+ if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+ mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
return ssusb_check_clocks(mtu->ssusb, check_clk);
}
@@ -129,7 +123,10 @@ static void mtu3_device_disable(struct mtu3 *mtu)
mtu3_setbits(ibase, SSUSB_U2_CTRL(0),
SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN);
- mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
+ if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+ mtu3_clrbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+
mtu3_setbits(ibase, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
}
@@ -236,7 +233,7 @@ void mtu3_ep_stall_set(struct mtu3_ep *mep, bool set)
void mtu3_dev_on_off(struct mtu3 *mtu, int is_on)
{
- if (mtu->is_u3_ip && (mtu->max_speed == USB_SPEED_SUPER))
+ if (mtu->is_u3_ip && mtu->max_speed >= USB_SPEED_SUPER)
mtu3_ss_func_set(mtu, is_on);
else
mtu3_hs_softconn_set(mtu, is_on);
@@ -546,6 +543,9 @@ static void mtu3_set_speed(struct mtu3 *mtu)
mtu3_clrbits(mbase, U3D_USB3_CONFIG, USB3_EN);
/* HS/FS detected by HW */
mtu3_setbits(mbase, U3D_POWER_MANAGEMENT, HS_ENABLE);
+ } else if (mtu->max_speed == USB_SPEED_SUPER) {
+ mtu3_clrbits(mtu->ippc_base, SSUSB_U3_CTRL(0),
+ SSUSB_U3_PORT_SSP_SPEED);
}
dev_info(mtu->dev, "max_speed: %s\n",
@@ -623,6 +623,10 @@ static irqreturn_t mtu3_link_isr(struct mtu3 *mtu)
udev_speed = USB_SPEED_SUPER;
maxpkt = 512;
break;
+ case MTU3_SPEED_SUPER_PLUS:
+ udev_speed = USB_SPEED_SUPER_PLUS;
+ maxpkt = 512;
+ break;
default:
udev_speed = USB_SPEED_UNKNOWN;
break;
@@ -759,7 +763,31 @@ static void mtu3_hw_exit(struct mtu3 *mtu)
mtu3_mem_free(mtu);
}
-/*-------------------------------------------------------------------------*/
+/**
+ * we set 32-bit DMA mask by default, here check whether the controller
+ * supports 36-bit DMA or not, if it does, set 36-bit DMA mask.
+ */
+static int mtu3_set_dma_mask(struct mtu3 *mtu)
+{
+ struct device *dev = mtu->dev;
+ bool is_36bit = false;
+ int ret = 0;
+ u32 value;
+
+ value = mtu3_readl(mtu->mac_base, U3D_MISC_CTRL);
+ if (value & DMA_ADDR_36BIT) {
+ is_36bit = true;
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(36));
+ /* If set 36-bit DMA mask fails, fall back to 32-bit DMA mask */
+ if (ret) {
+ is_36bit = false;
+ ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+ }
+ }
+ dev_info(dev, "dma mask: %s bits\n", is_36bit ? "36" : "32");
+
+ return ret;
+}
int ssusb_gadget_init(struct ssusb_mtk *ssusb)
{
@@ -774,9 +802,9 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
return -ENOMEM;
mtu->irq = platform_get_irq(pdev, 0);
- if (mtu->irq <= 0) {
+ if (mtu->irq < 0) {
dev_err(dev, "fail to get irq number\n");
- return -ENODEV;
+ return mtu->irq;
}
dev_info(dev, "irq %d\n", mtu->irq);
@@ -800,14 +828,15 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
case USB_SPEED_FULL:
case USB_SPEED_HIGH:
case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
break;
default:
dev_err(dev, "invalid max_speed: %s\n",
usb_speed_string(mtu->max_speed));
/* fall through */
case USB_SPEED_UNKNOWN:
- /* default as SS */
- mtu->max_speed = USB_SPEED_SUPER;
+ /* default as SSP */
+ mtu->max_speed = USB_SPEED_SUPER_PLUS;
break;
}
@@ -820,6 +849,12 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
return ret;
}
+ ret = mtu3_set_dma_mask(mtu);
+ if (ret) {
+ dev_err(dev, "mtu3 set dma_mask failed:%d\n", ret);
+ goto dma_mask_err;
+ }
+
ret = devm_request_irq(dev, mtu->irq, mtu3_irq, 0, dev_name(dev), mtu);
if (ret) {
dev_err(dev, "request irq %d failed!\n", mtu->irq);
@@ -845,6 +880,7 @@ int ssusb_gadget_init(struct ssusb_mtk *ssusb)
gadget_err:
device_init_wakeup(dev, false);
+dma_mask_err:
irq_err:
mtu3_hw_exit(mtu);
ssusb->u3d = NULL;
diff --git a/drivers/usb/mtu3/mtu3_dr.c b/drivers/usb/mtu3/mtu3_dr.c
index 560256115b23..db7562d99b95 100644
--- a/drivers/usb/mtu3/mtu3_dr.c
+++ b/drivers/usb/mtu3/mtu3_dr.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_dr.c - dual role switch and host glue layer
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/debugfs.h>
@@ -261,21 +252,22 @@ static void extcon_register_dwork(struct work_struct *work)
* depending on user input.
* This is useful in special cases, such as uses TYPE-A receptacle but also
* wants to support dual-role mode.
- * It generates cable state changes by pulling up/down IDPIN and
- * notifies driver to switch mode by "extcon-usb-gpio".
- * NOTE: when use MICRO receptacle, should not enable this interface.
*/
static void ssusb_mode_manual_switch(struct ssusb_mtk *ssusb, int to_host)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
- if (to_host)
- pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_ground);
- else
- pinctrl_select_state(otg_sx->id_pinctrl, otg_sx->id_float);
+ if (to_host) {
+ ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+ ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
+ ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
+ } else {
+ ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
+ ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
+ ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
+ }
}
-
static int ssusb_mode_show(struct seq_file *sf, void *unused)
{
struct ssusb_mtk *ssusb = sf->private;
@@ -388,17 +380,45 @@ static void ssusb_debugfs_exit(struct ssusb_mtk *ssusb)
debugfs_remove_recursive(ssusb->dbgfs_root);
}
+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
+ enum mtu3_dr_force_mode mode)
+{
+ u32 value;
+
+ value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
+ switch (mode) {
+ case MTU3_DR_FORCE_DEVICE:
+ value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
+ break;
+ case MTU3_DR_FORCE_HOST:
+ value |= SSUSB_U2_PORT_FORCE_IDDIG;
+ value &= ~SSUSB_U2_PORT_RG_IDDIG;
+ break;
+ case MTU3_DR_FORCE_NONE:
+ value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
+ break;
+ default:
+ return;
+ }
+ mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
+}
+
int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
- INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork, extcon_register_dwork);
-
- if (otg_sx->manual_drd_enabled)
+ if (otg_sx->manual_drd_enabled) {
ssusb_debugfs_init(ssusb);
-
- /* It is enough to delay 1s for waiting for host initialization */
- schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
+ } else {
+ INIT_DELAYED_WORK(&otg_sx->extcon_reg_dwork,
+ extcon_register_dwork);
+
+ /*
+ * It is enough to delay 1s for waiting for
+ * host initialization
+ */
+ schedule_delayed_work(&otg_sx->extcon_reg_dwork, HZ);
+ }
return 0;
}
@@ -407,8 +427,8 @@ void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
{
struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
- cancel_delayed_work(&otg_sx->extcon_reg_dwork);
-
if (otg_sx->manual_drd_enabled)
ssusb_debugfs_exit(ssusb);
+ else
+ cancel_delayed_work(&otg_sx->extcon_reg_dwork);
}
diff --git a/drivers/usb/mtu3/mtu3_dr.h b/drivers/usb/mtu3/mtu3_dr.h
index 9b228b5811b0..c179192408ba 100644
--- a/drivers/usb/mtu3/mtu3_dr.h
+++ b/drivers/usb/mtu3/mtu3_dr.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_dr.h - dual role switch and host glue layer header
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#ifndef _MTU3_DR_H_
@@ -87,6 +78,8 @@ static inline void ssusb_gadget_exit(struct ssusb_mtk *ssusb)
int ssusb_otg_switch_init(struct ssusb_mtk *ssusb);
void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb);
int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on);
+void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
+ enum mtu3_dr_force_mode mode);
#else
@@ -103,6 +96,10 @@ static inline int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
return 0;
}
+static inline void
+ssusb_set_force_mode(struct ssusb_mtk *ssusb, enum mtu3_dr_force_mode mode)
+{}
+
#endif
#endif /* _MTU3_DR_H_ */
diff --git a/drivers/usb/mtu3/mtu3_gadget.c b/drivers/usb/mtu3/mtu3_gadget.c
index 434fca58143c..f05f10f5c171 100644
--- a/drivers/usb/mtu3/mtu3_gadget.c
+++ b/drivers/usb/mtu3/mtu3_gadget.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_gadget.c - MediaTek usb3 DRD peripheral support
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include "mtu3.h"
@@ -89,6 +80,7 @@ static int mtu3_ep_enable(struct mtu3_ep *mep)
switch (mtu->g.speed) {
case USB_SPEED_SUPER:
+ case USB_SPEED_SUPER_PLUS:
if (usb_endpoint_xfer_int(desc) ||
usb_endpoint_xfer_isoc(desc)) {
interval = desc->bInterval;
@@ -456,7 +448,7 @@ static int mtu3_gadget_wakeup(struct usb_gadget *gadget)
return -EOPNOTSUPP;
spin_lock_irqsave(&mtu->lock, flags);
- if (mtu->g.speed == USB_SPEED_SUPER) {
+ if (mtu->g.speed >= USB_SPEED_SUPER) {
mtu3_setbits(mtu->mac_base, U3D_LINK_POWER_CONTROL, UX_EXIT);
} else {
mtu3_setbits(mtu->mac_base, U3D_POWER_MANAGEMENT, RESUME);
diff --git a/drivers/usb/mtu3/mtu3_gadget_ep0.c b/drivers/usb/mtu3/mtu3_gadget_ep0.c
index 958d74dd2b78..ebdcf7a38c29 100644
--- a/drivers/usb/mtu3/mtu3_gadget_ep0.c
+++ b/drivers/usb/mtu3/mtu3_gadget_ep0.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_gadget_ep0.c - MediaTek USB3 DRD peripheral driver ep0 handling
*
* Copyright (c) 2016 MediaTek Inc.
*
* Author: Chunfeng.Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/usb/composite.h>
@@ -212,8 +203,8 @@ ep0_get_status(struct mtu3 *mtu, const struct usb_ctrlrequest *setup)
case USB_RECIP_DEVICE:
result[0] = mtu->is_self_powered << USB_DEVICE_SELF_POWERED;
result[0] |= mtu->may_wakeup << USB_DEVICE_REMOTE_WAKEUP;
- /* superspeed only */
- if (mtu->g.speed == USB_SPEED_SUPER) {
+
+ if (mtu->g.speed >= USB_SPEED_SUPER) {
result[0] |= mtu->u1_enable << USB_DEV_STAT_U1_ENABLED;
result[0] |= mtu->u2_enable << USB_DEV_STAT_U2_ENABLED;
}
@@ -329,8 +320,8 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
handled = handle_test_mode(mtu, setup);
break;
case USB_DEVICE_U1_ENABLE:
- if (mtu->g.speed != USB_SPEED_SUPER ||
- mtu->g.state != USB_STATE_CONFIGURED)
+ if (mtu->g.speed < USB_SPEED_SUPER ||
+ mtu->g.state != USB_STATE_CONFIGURED)
break;
lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
@@ -344,8 +335,8 @@ static int ep0_handle_feature_dev(struct mtu3 *mtu,
handled = 1;
break;
case USB_DEVICE_U2_ENABLE:
- if (mtu->g.speed != USB_SPEED_SUPER ||
- mtu->g.state != USB_STATE_CONFIGURED)
+ if (mtu->g.speed < USB_SPEED_SUPER ||
+ mtu->g.state != USB_STATE_CONFIGURED)
break;
lpc = mtu3_readl(mbase, U3D_LINK_POWER_CONTROL);
@@ -384,8 +375,8 @@ static int ep0_handle_feature(struct mtu3 *mtu,
break;
case USB_RECIP_INTERFACE:
/* superspeed only */
- if ((value == USB_INTRF_FUNC_SUSPEND)
- && (mtu->g.speed == USB_SPEED_SUPER)) {
+ if (value == USB_INTRF_FUNC_SUSPEND &&
+ mtu->g.speed >= USB_SPEED_SUPER) {
/*
* forward the request because function drivers
* should handle it
diff --git a/drivers/usb/mtu3/mtu3_host.c b/drivers/usb/mtu3/mtu3_host.c
index e42d308b8dc2..d237d7e65c44 100644
--- a/drivers/usb/mtu3/mtu3_host.c
+++ b/drivers/usb/mtu3/mtu3_host.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_dr.c - dual role switch and host glue layer
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/clk.h>
@@ -79,20 +70,6 @@ int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
if (!ssusb->wakeup_en)
return 0;
- ssusb->wk_deb_p0 = devm_clk_get(dev, "wakeup_deb_p0");
- if (IS_ERR(ssusb->wk_deb_p0)) {
- dev_err(dev, "fail to get wakeup_deb_p0\n");
- return PTR_ERR(ssusb->wk_deb_p0);
- }
-
- if (of_property_read_bool(dn, "wakeup_deb_p1")) {
- ssusb->wk_deb_p1 = devm_clk_get(dev, "wakeup_deb_p1");
- if (IS_ERR(ssusb->wk_deb_p1)) {
- dev_err(dev, "fail to get wakeup_deb_p1\n");
- return PTR_ERR(ssusb->wk_deb_p1);
- }
- }
-
ssusb->pericfg = syscon_regmap_lookup_by_phandle(dn,
"mediatek,syscon-wakeup");
if (IS_ERR(ssusb->pericfg)) {
@@ -103,36 +80,6 @@ int ssusb_wakeup_of_property_parse(struct ssusb_mtk *ssusb,
return 0;
}
-static int ssusb_wakeup_clks_enable(struct ssusb_mtk *ssusb)
-{
- int ret;
-
- ret = clk_prepare_enable(ssusb->wk_deb_p0);
- if (ret) {
- dev_err(ssusb->dev, "failed to enable wk_deb_p0\n");
- goto usb_p0_err;
- }
-
- ret = clk_prepare_enable(ssusb->wk_deb_p1);
- if (ret) {
- dev_err(ssusb->dev, "failed to enable wk_deb_p1\n");
- goto usb_p1_err;
- }
-
- return 0;
-
-usb_p1_err:
- clk_disable_unprepare(ssusb->wk_deb_p0);
-usb_p0_err:
- return -EINVAL;
-}
-
-static void ssusb_wakeup_clks_disable(struct ssusb_mtk *ssusb)
-{
- clk_disable_unprepare(ssusb->wk_deb_p1);
- clk_disable_unprepare(ssusb->wk_deb_p0);
-}
-
static void host_ports_num_get(struct ssusb_mtk *ssusb)
{
u32 xhci_cap;
@@ -151,6 +98,7 @@ int ssusb_host_enable(struct ssusb_mtk *ssusb)
void __iomem *ibase = ssusb->ippc_base;
int num_u3p = ssusb->u3_ports;
int num_u2p = ssusb->u2_ports;
+ int u3_ports_disabed;
u32 check_clk;
u32 value;
int i;
@@ -158,8 +106,14 @@ int ssusb_host_enable(struct ssusb_mtk *ssusb)
/* power on host ip */
mtu3_clrbits(ibase, U3D_SSUSB_IP_PW_CTRL1, SSUSB_IP_HOST_PDN);
- /* power on and enable all u3 ports */
+ /* power on and enable u3 ports except skipped ones */
+ u3_ports_disabed = 0;
for (i = 0; i < num_u3p; i++) {
+ if ((0x1 << i) & ssusb->u3p_dis_msk) {
+ u3_ports_disabed++;
+ continue;
+ }
+
value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
value |= SSUSB_U3_PORT_HOST_SEL;
@@ -175,7 +129,7 @@ int ssusb_host_enable(struct ssusb_mtk *ssusb)
}
check_clk = SSUSB_XHCI_RST_B_STS;
- if (num_u3p)
+ if (num_u3p > u3_ports_disabed)
check_clk = SSUSB_U3_MAC_RST_B_STS;
return ssusb_check_clocks(ssusb, check_clk);
@@ -190,8 +144,11 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
int ret;
int i;
- /* power down and disable all u3 ports */
+ /* power down and disable u3 ports except skipped ones */
for (i = 0; i < num_u3p; i++) {
+ if ((0x1 << i) & ssusb->u3p_dis_msk)
+ continue;
+
value = mtu3_readl(ibase, SSUSB_U3_CTRL(i));
value |= SSUSB_U3_PORT_PDN;
value |= suspend ? 0 : SSUSB_U3_PORT_DIS;
@@ -223,6 +180,8 @@ int ssusb_host_disable(struct ssusb_mtk *ssusb, bool suspend)
static void ssusb_host_setup(struct ssusb_mtk *ssusb)
{
+ struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
+
host_ports_num_get(ssusb);
/*
@@ -231,6 +190,9 @@ static void ssusb_host_setup(struct ssusb_mtk *ssusb)
*/
ssusb_host_enable(ssusb);
+ if (otg_sx->manual_drd_enabled)
+ ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
+
/* if port0 supports dual-role, works as host mode by default */
ssusb_set_vbus(&ssusb->otg_switch, 1);
}
@@ -276,19 +238,14 @@ void ssusb_host_exit(struct ssusb_mtk *ssusb)
int ssusb_wakeup_enable(struct ssusb_mtk *ssusb)
{
- int ret = 0;
-
- if (ssusb->wakeup_en) {
- ret = ssusb_wakeup_clks_enable(ssusb);
+ if (ssusb->wakeup_en)
ssusb_wakeup_ip_sleep_en(ssusb);
- }
- return ret;
+
+ return 0;
}
void ssusb_wakeup_disable(struct ssusb_mtk *ssusb)
{
- if (ssusb->wakeup_en) {
+ if (ssusb->wakeup_en)
ssusb_wakeup_ip_sleep_dis(ssusb);
- ssusb_wakeup_clks_disable(ssusb);
- }
}
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index 06b29664470f..6ee371478d89 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_hw_regs.h - MediaTek USB3 DRD register and field definitions
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#ifndef _SSUSB_HW_REGS_H_
@@ -58,6 +49,8 @@
#define U3D_QCR1 (SSUSB_DEV_BASE + 0x0404)
#define U3D_QCR2 (SSUSB_DEV_BASE + 0x0408)
#define U3D_QCR3 (SSUSB_DEV_BASE + 0x040C)
+#define U3D_TXQHIAR1 (SSUSB_DEV_BASE + 0x0484)
+#define U3D_RXQHIAR1 (SSUSB_DEV_BASE + 0x04C4)
#define U3D_TXQCSR1 (SSUSB_DEV_BASE + 0x0510)
#define U3D_TXQSAR1 (SSUSB_DEV_BASE + 0x0514)
@@ -189,6 +182,13 @@
#define QMU_RX_COZ(x) (BIT(16) << (x))
#define QMU_RX_ZLP(x) (BIT(0) << (x))
+/* U3D_TXQHIAR1 */
+/* U3D_RXQHIAR1 */
+#define QMU_LAST_DONE_PTR_HI(x) (((x) >> 16) & 0xf)
+#define QMU_CUR_GPD_ADDR_HI(x) (((x) >> 8) & 0xf)
+#define QMU_START_ADDR_HI_MSK GENMASK(3, 0)
+#define QMU_START_ADDR_HI(x) (((x) & 0xf) << 0)
+
/* U3D_TXQCSR1 */
/* U3D_RXQCSR1 */
#define QMU_Q_ACTIVE BIT(15)
@@ -225,6 +225,7 @@
#define CAP_TX_EP_NUM(x) ((x) & 0x1f)
/* U3D_MISC_CTRL */
+#define DMA_ADDR_36BIT BIT(31)
#define VBUS_ON BIT(1)
#define VBUS_FRC_EN BIT(0)
@@ -457,11 +458,14 @@
#define SSUSB_VBUS_CHG_INT_B_EN BIT(6)
/* U3D_SSUSB_U3_CTRL_0P */
+#define SSUSB_U3_PORT_SSP_SPEED BIT(9)
#define SSUSB_U3_PORT_HOST_SEL BIT(2)
#define SSUSB_U3_PORT_PDN BIT(1)
#define SSUSB_U3_PORT_DIS BIT(0)
/* U3D_SSUSB_U2_CTRL_0P */
+#define SSUSB_U2_PORT_RG_IDDIG BIT(12)
+#define SSUSB_U2_PORT_FORCE_IDDIG BIT(11)
#define SSUSB_U2_PORT_VBUSVALID BIT(9)
#define SSUSB_U2_PORT_OTG_SEL BIT(7)
#define SSUSB_U2_PORT_HOST BIT(2)
diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 088e3e685c4f..3650fd11fc49 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -1,17 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#include <linux/clk.h>
@@ -21,7 +12,6 @@
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include "mtu3.h"
@@ -110,15 +100,9 @@ static void ssusb_phy_power_off(struct ssusb_mtk *ssusb)
phy_power_off(ssusb->phys[i]);
}
-static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
+static int ssusb_clks_enable(struct ssusb_mtk *ssusb)
{
- int ret = 0;
-
- ret = regulator_enable(ssusb->vusb33);
- if (ret) {
- dev_err(ssusb->dev, "failed to enable vusb33\n");
- goto vusb33_err;
- }
+ int ret;
ret = clk_prepare_enable(ssusb->sys_clk);
if (ret) {
@@ -132,6 +116,52 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
goto ref_clk_err;
}
+ ret = clk_prepare_enable(ssusb->mcu_clk);
+ if (ret) {
+ dev_err(ssusb->dev, "failed to enable mcu_clk\n");
+ goto mcu_clk_err;
+ }
+
+ ret = clk_prepare_enable(ssusb->dma_clk);
+ if (ret) {
+ dev_err(ssusb->dev, "failed to enable dma_clk\n");
+ goto dma_clk_err;
+ }
+
+ return 0;
+
+dma_clk_err:
+ clk_disable_unprepare(ssusb->mcu_clk);
+mcu_clk_err:
+ clk_disable_unprepare(ssusb->ref_clk);
+ref_clk_err:
+ clk_disable_unprepare(ssusb->sys_clk);
+sys_clk_err:
+ return ret;
+}
+
+static void ssusb_clks_disable(struct ssusb_mtk *ssusb)
+{
+ clk_disable_unprepare(ssusb->dma_clk);
+ clk_disable_unprepare(ssusb->mcu_clk);
+ clk_disable_unprepare(ssusb->ref_clk);
+ clk_disable_unprepare(ssusb->sys_clk);
+}
+
+static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
+{
+ int ret = 0;
+
+ ret = regulator_enable(ssusb->vusb33);
+ if (ret) {
+ dev_err(ssusb->dev, "failed to enable vusb33\n");
+ goto vusb33_err;
+ }
+
+ ret = ssusb_clks_enable(ssusb);
+ if (ret)
+ goto clks_err;
+
ret = ssusb_phy_init(ssusb);
if (ret) {
dev_err(ssusb->dev, "failed to init phy\n");
@@ -149,20 +179,16 @@ static int ssusb_rscs_init(struct ssusb_mtk *ssusb)
phy_err:
ssusb_phy_exit(ssusb);
phy_init_err:
- clk_disable_unprepare(ssusb->ref_clk);
-ref_clk_err:
- clk_disable_unprepare(ssusb->sys_clk);
-sys_clk_err:
+ ssusb_clks_disable(ssusb);
+clks_err:
regulator_disable(ssusb->vusb33);
vusb33_err:
-
return ret;
}
static void ssusb_rscs_exit(struct ssusb_mtk *ssusb)
{
- clk_disable_unprepare(ssusb->sys_clk);
- clk_disable_unprepare(ssusb->ref_clk);
+ ssusb_clks_disable(ssusb);
regulator_disable(ssusb->vusb33);
ssusb_phy_power_off(ssusb);
ssusb_phy_exit(ssusb);
@@ -176,31 +202,17 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
}
-static int get_iddig_pinctrl(struct ssusb_mtk *ssusb)
+/* ignore the error if the clock does not exist */
+static struct clk *get_optional_clk(struct device *dev, const char *id)
{
- struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
-
- otg_sx->id_pinctrl = devm_pinctrl_get(ssusb->dev);
- if (IS_ERR(otg_sx->id_pinctrl)) {
- dev_err(ssusb->dev, "Cannot find id pinctrl!\n");
- return PTR_ERR(otg_sx->id_pinctrl);
- }
-
- otg_sx->id_float =
- pinctrl_lookup_state(otg_sx->id_pinctrl, "id_float");
- if (IS_ERR(otg_sx->id_float)) {
- dev_err(ssusb->dev, "Cannot find pinctrl id_float!\n");
- return PTR_ERR(otg_sx->id_float);
- }
+ struct clk *opt_clk;
- otg_sx->id_ground =
- pinctrl_lookup_state(otg_sx->id_pinctrl, "id_ground");
- if (IS_ERR(otg_sx->id_ground)) {
- dev_err(ssusb->dev, "Cannot find pinctrl id_ground!\n");
- return PTR_ERR(otg_sx->id_ground);
- }
+ opt_clk = devm_clk_get(dev, id);
+ /* ignore error number except EPROBE_DEFER */
+ if (IS_ERR(opt_clk) && (PTR_ERR(opt_clk) != -EPROBE_DEFER))
+ opt_clk = NULL;
- return 0;
+ return opt_clk;
}
static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
@@ -225,18 +237,17 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
return PTR_ERR(ssusb->sys_clk);
}
- /*
- * reference clock is usually a "fixed-clock", make it optional
- * for backward compatibility and ignore the error if it does
- * not exist.
- */
- ssusb->ref_clk = devm_clk_get(dev, "ref_ck");
- if (IS_ERR(ssusb->ref_clk)) {
- if (PTR_ERR(ssusb->ref_clk) == -EPROBE_DEFER)
- return -EPROBE_DEFER;
+ ssusb->ref_clk = get_optional_clk(dev, "ref_ck");
+ if (IS_ERR(ssusb->ref_clk))
+ return PTR_ERR(ssusb->ref_clk);
- ssusb->ref_clk = NULL;
- }
+ ssusb->mcu_clk = get_optional_clk(dev, "mcu_ck");
+ if (IS_ERR(ssusb->mcu_clk))
+ return PTR_ERR(ssusb->mcu_clk);
+
+ ssusb->dma_clk = get_optional_clk(dev, "dma_ck");
+ if (IS_ERR(ssusb->dma_clk))
+ return PTR_ERR(ssusb->dma_clk);
ssusb->num_phys = of_count_phandle_with_args(node,
"phys", "#phy-cells");
@@ -263,10 +274,8 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
return PTR_ERR(ssusb->ippc_base);
ssusb->dr_mode = usb_get_dr_mode(dev);
- if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN) {
- dev_err(dev, "dr_mode is error\n");
- return -EINVAL;
- }
+ if (ssusb->dr_mode == USB_DR_MODE_UNKNOWN)
+ ssusb->dr_mode = USB_DR_MODE_OTG;
if (ssusb->dr_mode == USB_DR_MODE_PERIPHERAL)
return 0;
@@ -276,10 +285,10 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
if (ret)
return ret;
- if (ssusb->dr_mode != USB_DR_MODE_OTG)
- return 0;
+ /* optional property, ignore the error if it does not exist */
+ of_property_read_u32(node, "mediatek,u3p-dis-msk",
+ &ssusb->u3p_dis_msk);
- /* if dual-role mode is supported */
vbus = devm_regulator_get(&pdev->dev, "vbus");
if (IS_ERR(vbus)) {
dev_err(dev, "failed to get vbus\n");
@@ -287,6 +296,10 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
}
otg_sx->vbus = vbus;
+ if (ssusb->dr_mode == USB_DR_MODE_HOST)
+ return 0;
+
+ /* if dual-role mode is supported */
otg_sx->is_u3_drd = of_property_read_bool(node, "mediatek,usb3-drd");
otg_sx->manual_drd_enabled =
of_property_read_bool(node, "enable-manual-drd");
@@ -297,15 +310,11 @@ static int get_ssusb_rscs(struct platform_device *pdev, struct ssusb_mtk *ssusb)
dev_err(ssusb->dev, "couldn't get extcon device\n");
return -EPROBE_DEFER;
}
- if (otg_sx->manual_drd_enabled) {
- ret = get_iddig_pinctrl(ssusb);
- if (ret)
- return ret;
- }
}
- dev_info(dev, "dr_mode: %d, is_u3_dr: %d\n",
- ssusb->dr_mode, otg_sx->is_u3_drd);
+ dev_info(dev, "dr_mode: %d, is_u3_dr: %d, u3p_dis_msk: %x, drd: %s\n",
+ ssusb->dr_mode, otg_sx->is_u3_drd, ssusb->u3p_dis_msk,
+ otg_sx->manual_drd_enabled ? "manual" : "auto");
return 0;
}
@@ -447,8 +456,7 @@ static int __maybe_unused mtu3_suspend(struct device *dev)
ssusb_host_disable(ssusb, true);
ssusb_phy_power_off(ssusb);
- clk_disable_unprepare(ssusb->sys_clk);
- clk_disable_unprepare(ssusb->ref_clk);
+ ssusb_clks_disable(ssusb);
ssusb_wakeup_enable(ssusb);
return 0;
@@ -466,27 +474,21 @@ static int __maybe_unused mtu3_resume(struct device *dev)
return 0;
ssusb_wakeup_disable(ssusb);
- ret = clk_prepare_enable(ssusb->sys_clk);
- if (ret)
- goto err_sys_clk;
-
- ret = clk_prepare_enable(ssusb->ref_clk);
+ ret = ssusb_clks_enable(ssusb);
if (ret)
- goto err_ref_clk;
+ goto clks_err;
ret = ssusb_phy_power_on(ssusb);
if (ret)
- goto err_power_on;
+ goto phy_err;
ssusb_host_enable(ssusb);
return 0;
-err_power_on:
- clk_disable_unprepare(ssusb->ref_clk);
-err_ref_clk:
- clk_disable_unprepare(ssusb->sys_clk);
-err_sys_clk:
+phy_err:
+ ssusb_clks_disable(ssusb);
+clks_err:
return ret;
}
diff --git a/drivers/usb/mtu3/mtu3_qmu.c b/drivers/usb/mtu3/mtu3_qmu.c
index 7d9ba8a52368..ff62ba232177 100644
--- a/drivers/usb/mtu3/mtu3_qmu.c
+++ b/drivers/usb/mtu3/mtu3_qmu.c
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_qmu.c - Queue Management Unit driver for device controller
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
/*
@@ -40,7 +31,58 @@
#define GPD_FLAGS_IOC BIT(7)
#define GPD_EXT_FLAG_ZLP BIT(5)
+#define GPD_EXT_NGP(x) (((x) & 0xf) << 4)
+#define GPD_EXT_BUF(x) (((x) & 0xf) << 0)
+
+#define HILO_GEN64(hi, lo) (((u64)(hi) << 32) + (lo))
+#define HILO_DMA(hi, lo) \
+ ((dma_addr_t)HILO_GEN64((le32_to_cpu(hi)), (le32_to_cpu(lo))))
+
+static dma_addr_t read_txq_cur_addr(void __iomem *mbase, u8 epnum)
+{
+ u32 txcpr;
+ u32 txhiar;
+
+ txcpr = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
+ txhiar = mtu3_readl(mbase, USB_QMU_TQHIAR(epnum));
+ return HILO_DMA(QMU_CUR_GPD_ADDR_HI(txhiar), txcpr);
+}
+
+static dma_addr_t read_rxq_cur_addr(void __iomem *mbase, u8 epnum)
+{
+ u32 rxcpr;
+ u32 rxhiar;
+
+ rxcpr = mtu3_readl(mbase, USB_QMU_RQCPR(epnum));
+ rxhiar = mtu3_readl(mbase, USB_QMU_RQHIAR(epnum));
+
+ return HILO_DMA(QMU_CUR_GPD_ADDR_HI(rxhiar), rxcpr);
+}
+
+static void write_txq_start_addr(void __iomem *mbase, u8 epnum, dma_addr_t dma)
+{
+ u32 tqhiar;
+
+ mtu3_writel(mbase, USB_QMU_TQSAR(epnum),
+ cpu_to_le32(lower_32_bits(dma)));
+ tqhiar = mtu3_readl(mbase, USB_QMU_TQHIAR(epnum));
+ tqhiar &= ~QMU_START_ADDR_HI_MSK;
+ tqhiar |= QMU_START_ADDR_HI(upper_32_bits(dma));
+ mtu3_writel(mbase, USB_QMU_TQHIAR(epnum), tqhiar);
+}
+
+static void write_rxq_start_addr(void __iomem *mbase, u8 epnum, dma_addr_t dma)
+{
+ u32 rqhiar;
+
+ mtu3_writel(mbase, USB_QMU_RQSAR(epnum),
+ cpu_to_le32(lower_32_bits(dma)));
+ rqhiar = mtu3_readl(mbase, USB_QMU_RQHIAR(epnum));
+ rqhiar &= ~QMU_START_ADDR_HI_MSK;
+ rqhiar |= QMU_START_ADDR_HI(upper_32_bits(dma));
+ mtu3_writel(mbase, USB_QMU_RQHIAR(epnum), rqhiar);
+}
static struct qmu_gpd *gpd_dma_to_virt(struct mtu3_gpd_ring *ring,
dma_addr_t dma_addr)
@@ -193,21 +235,27 @@ static int mtu3_prepare_tx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
struct mtu3_gpd_ring *ring = &mep->gpd_ring;
struct qmu_gpd *gpd = ring->enqueue;
struct usb_request *req = &mreq->request;
+ dma_addr_t enq_dma;
+ u16 ext_addr;
/* set all fields to zero as default value */
memset(gpd, 0, sizeof(*gpd));
- gpd->buffer = cpu_to_le32((u32)req->dma);
+ gpd->buffer = cpu_to_le32(lower_32_bits(req->dma));
+ ext_addr = GPD_EXT_BUF(upper_32_bits(req->dma));
gpd->buf_len = cpu_to_le16(req->length);
gpd->flag |= GPD_FLAGS_IOC;
/* get the next GPD */
enq = advance_enq_gpd(ring);
- dev_dbg(mep->mtu->dev, "TX-EP%d queue gpd=%p, enq=%p\n",
- mep->epnum, gpd, enq);
+ enq_dma = gpd_virt_to_dma(ring, enq);
+ dev_dbg(mep->mtu->dev, "TX-EP%d queue gpd=%p, enq=%p, qdma=%pad\n",
+ mep->epnum, gpd, enq, &enq_dma);
enq->flag &= ~GPD_FLAGS_HWO;
- gpd->next_gpd = cpu_to_le32((u32)gpd_virt_to_dma(ring, enq));
+ gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
+ ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma));
+ gpd->tx_ext_addr = cpu_to_le16(ext_addr);
if (req->zero)
gpd->ext_flag |= GPD_EXT_FLAG_ZLP;
@@ -226,21 +274,27 @@ static int mtu3_prepare_rx_gpd(struct mtu3_ep *mep, struct mtu3_request *mreq)
struct mtu3_gpd_ring *ring = &mep->gpd_ring;
struct qmu_gpd *gpd = ring->enqueue;
struct usb_request *req = &mreq->request;
+ dma_addr_t enq_dma;
+ u16 ext_addr;
/* set all fields to zero as default value */
memset(gpd, 0, sizeof(*gpd));
- gpd->buffer = cpu_to_le32((u32)req->dma);
+ gpd->buffer = cpu_to_le32(lower_32_bits(req->dma));
+ ext_addr = GPD_EXT_BUF(upper_32_bits(req->dma));
gpd->data_buf_len = cpu_to_le16(req->length);
gpd->flag |= GPD_FLAGS_IOC;
/* get the next GPD */
enq = advance_enq_gpd(ring);
- dev_dbg(mep->mtu->dev, "RX-EP%d queue gpd=%p, enq=%p\n",
- mep->epnum, gpd, enq);
+ enq_dma = gpd_virt_to_dma(ring, enq);
+ dev_dbg(mep->mtu->dev, "RX-EP%d queue gpd=%p, enq=%p, qdma=%pad\n",
+ mep->epnum, gpd, enq, &enq_dma);
enq->flag &= ~GPD_FLAGS_HWO;
- gpd->next_gpd = cpu_to_le32((u32)gpd_virt_to_dma(ring, enq));
+ gpd->next_gpd = cpu_to_le32(lower_32_bits(enq_dma));
+ ext_addr |= GPD_EXT_NGP(upper_32_bits(enq_dma));
+ gpd->rx_ext_addr = cpu_to_le16(ext_addr);
gpd->chksum = qmu_calc_checksum((u8 *)gpd);
gpd->flag |= GPD_FLAGS_HWO;
@@ -267,8 +321,8 @@ int mtu3_qmu_start(struct mtu3_ep *mep)
if (mep->is_in) {
/* set QMU start address */
- mtu3_writel(mbase, USB_QMU_TQSAR(mep->epnum), ring->dma);
- mtu3_setbits(mbase, MU3D_EP_TXCR0(mep->epnum), TX_DMAREQEN);
+ write_txq_start_addr(mbase, epnum, ring->dma);
+ mtu3_setbits(mbase, MU3D_EP_TXCR0(epnum), TX_DMAREQEN);
mtu3_setbits(mbase, U3D_QCR0, QMU_TX_CS_EN(epnum));
/* send zero length packet according to ZLP flag in GPD */
mtu3_setbits(mbase, U3D_QCR1, QMU_TX_ZLP(epnum));
@@ -282,8 +336,8 @@ int mtu3_qmu_start(struct mtu3_ep *mep)
mtu3_writel(mbase, USB_QMU_TQCSR(epnum), QMU_Q_START);
} else {
- mtu3_writel(mbase, USB_QMU_RQSAR(mep->epnum), ring->dma);
- mtu3_setbits(mbase, MU3D_EP_RXCR0(mep->epnum), RX_DMAREQEN);
+ write_rxq_start_addr(mbase, epnum, ring->dma);
+ mtu3_setbits(mbase, MU3D_EP_RXCR0(epnum), RX_DMAREQEN);
mtu3_setbits(mbase, U3D_QCR0, QMU_RX_CS_EN(epnum));
/* don't expect ZLP */
mtu3_clrbits(mbase, U3D_QCR3, QMU_RX_ZLP(epnum));
@@ -353,9 +407,9 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum)
struct mtu3_gpd_ring *ring = &mep->gpd_ring;
void __iomem *mbase = mtu->mac_base;
struct qmu_gpd *gpd_current = NULL;
- dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
struct usb_request *req = NULL;
struct mtu3_request *mreq;
+ dma_addr_t cur_gpd_dma;
u32 txcsr = 0;
int ret;
@@ -365,7 +419,8 @@ static void qmu_tx_zlp_error_handler(struct mtu3 *mtu, u8 epnum)
else
return;
- gpd_current = gpd_dma_to_virt(ring, gpd_dma);
+ cur_gpd_dma = read_txq_cur_addr(mbase, epnum);
+ gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
if (le16_to_cpu(gpd_current->buf_len) != 0) {
dev_err(mtu->dev, "TX EP%d buffer length error(!=0)\n", epnum);
@@ -408,12 +463,13 @@ static void qmu_done_tx(struct mtu3 *mtu, u8 epnum)
void __iomem *mbase = mtu->mac_base;
struct qmu_gpd *gpd = ring->dequeue;
struct qmu_gpd *gpd_current = NULL;
- dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_TQCPR(epnum));
struct usb_request *request = NULL;
struct mtu3_request *mreq;
+ dma_addr_t cur_gpd_dma;
/*transfer phy address got from QMU register to virtual address */
- gpd_current = gpd_dma_to_virt(ring, gpd_dma);
+ cur_gpd_dma = read_txq_cur_addr(mbase, epnum);
+ gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
__func__, epnum, gpd, gpd_current, ring->enqueue);
@@ -446,11 +502,12 @@ static void qmu_done_rx(struct mtu3 *mtu, u8 epnum)
void __iomem *mbase = mtu->mac_base;
struct qmu_gpd *gpd = ring->dequeue;
struct qmu_gpd *gpd_current = NULL;
- dma_addr_t gpd_dma = mtu3_readl(mbase, USB_QMU_RQCPR(epnum));
struct usb_request *req = NULL;
struct mtu3_request *mreq;
+ dma_addr_t cur_gpd_dma;
- gpd_current = gpd_dma_to_virt(ring, gpd_dma);
+ cur_gpd_dma = read_rxq_cur_addr(mbase, epnum);
+ gpd_current = gpd_dma_to_virt(ring, cur_gpd_dma);
dev_dbg(mtu->dev, "%s EP%d, last=%p, current=%p, enq=%p\n",
__func__, epnum, gpd, gpd_current, ring->enqueue);
diff --git a/drivers/usb/mtu3/mtu3_qmu.h b/drivers/usb/mtu3/mtu3_qmu.h
index 4dafa16bf120..81f5151a55ed 100644
--- a/drivers/usb/mtu3/mtu3_qmu.h
+++ b/drivers/usb/mtu3/mtu3_qmu.h
@@ -1,19 +1,10 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* mtu3_qmu.h - Queue Management Unit driver header
*
* Copyright (C) 2016 MediaTek Inc.
*
* Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
#ifndef __MTK_QMU_H__
generated by cgit (git 2.34.1) at 2024-06-12 15:37:38 +0000