diff options
Diffstat (limited to 'drivers/usb/typec')
| -rw-r--r-- | drivers/usb/typec/class.c | 6 | ||||
| -rw-r--r-- | drivers/usb/typec/tcpm/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/usb/typec/tcpm/tcpci.c | 20 | ||||
| -rw-r--r-- | drivers/usb/typec/ucsi/ucsi.h | 18 |
4 files changed, 29 insertions, 16 deletions
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 7ece6ca6e690..91d62276b56f 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -1612,14 +1612,16 @@ struct typec_port *typec_register_port(struct device *parent, port->sw = typec_switch_get(&port->dev); if (IS_ERR(port->sw)) { + ret = PTR_ERR(port->sw); put_device(&port->dev); - return ERR_CAST(port->sw); + return ERR_PTR(ret); } port->mux = typec_mux_get(&port->dev, NULL); if (IS_ERR(port->mux)) { + ret = PTR_ERR(port->mux); put_device(&port->dev); - return ERR_CAST(port->mux); + return ERR_PTR(ret); } ret = device_add(&port->dev); diff --git a/drivers/usb/typec/tcpm/Kconfig b/drivers/usb/typec/tcpm/Kconfig index 72481bbb2af3..5b986d6c801d 100644 --- a/drivers/usb/typec/tcpm/Kconfig +++ b/drivers/usb/typec/tcpm/Kconfig @@ -32,6 +32,7 @@ endif # TYPEC_TCPCI config TYPEC_FUSB302 tristate "Fairchild FUSB302 Type-C chip driver" depends on I2C + depends on EXTCON || !EXTCON help The Fairchild FUSB302 Type-C chip driver that works with Type-C Port Controller Manager to provide USB PD and USB diff --git a/drivers/usb/typec/tcpm/tcpci.c b/drivers/usb/typec/tcpm/tcpci.c index c1f7073a56de..8b4ff9fff340 100644 --- a/drivers/usb/typec/tcpm/tcpci.c +++ b/drivers/usb/typec/tcpm/tcpci.c @@ -432,20 +432,30 @@ irqreturn_t tcpci_irq(struct tcpci *tcpci) if (status & TCPC_ALERT_RX_STATUS) { struct pd_message msg; - unsigned int cnt; + unsigned int cnt, payload_cnt; u16 header; regmap_read(tcpci->regmap, TCPC_RX_BYTE_CNT, &cnt); + /* + * 'cnt' corresponds to READABLE_BYTE_COUNT in section 4.4.14 + * of the TCPCI spec [Rev 2.0 Ver 1.0 October 2017] and is + * defined in table 4-36 as one greater than the number of + * bytes received. And that number includes the header. So: + */ + if (cnt > 3) + payload_cnt = cnt - (1 + sizeof(msg.header)); + else + payload_cnt = 0; tcpci_read16(tcpci, TCPC_RX_HDR, &header); msg.header = cpu_to_le16(header); - if (WARN_ON(cnt > sizeof(msg.payload))) - cnt = sizeof(msg.payload); + if (WARN_ON(payload_cnt > sizeof(msg.payload))) + payload_cnt = sizeof(msg.payload); - if (cnt > 0) + if (payload_cnt > 0) regmap_raw_read(tcpci->regmap, TCPC_RX_DATA, - &msg.payload, cnt); + &msg.payload, payload_cnt); /* Read complete, clear RX status alert bit */ tcpci_write16(tcpci, TCPC_ALERT, TCPC_ALERT_RX_STATUS); diff --git a/drivers/usb/typec/ucsi/ucsi.h b/drivers/usb/typec/ucsi/ucsi.h index 8569bbd3762f..831c9470bdc1 100644 --- a/drivers/usb/typec/ucsi/ucsi.h +++ b/drivers/usb/typec/ucsi/ucsi.h @@ -94,15 +94,15 @@ void ucsi_connector_change(struct ucsi *ucsi, u8 num); #define UCSI_ENABLE_NTFY_CMD_COMPLETE BIT(16) #define UCSI_ENABLE_NTFY_EXT_PWR_SRC_CHANGE BIT(17) #define UCSI_ENABLE_NTFY_PWR_OPMODE_CHANGE BIT(18) -#define UCSI_ENABLE_NTFY_CAP_CHANGE BIT(19) -#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE BIT(20) -#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE BIT(21) -#define UCSI_ENABLE_NTFY_CAM_CHANGE BIT(22) -#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE BIT(23) -#define UCSI_ENABLE_NTFY_PARTNER_CHANGE BIT(24) -#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE BIT(25) -#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE BIT(26) -#define UCSI_ENABLE_NTFY_ERROR BIT(27) +#define UCSI_ENABLE_NTFY_CAP_CHANGE BIT(21) +#define UCSI_ENABLE_NTFY_PWR_LEVEL_CHANGE BIT(22) +#define UCSI_ENABLE_NTFY_PD_RESET_COMPLETE BIT(23) +#define UCSI_ENABLE_NTFY_CAM_CHANGE BIT(24) +#define UCSI_ENABLE_NTFY_BAT_STATUS_CHANGE BIT(25) +#define UCSI_ENABLE_NTFY_PARTNER_CHANGE BIT(27) +#define UCSI_ENABLE_NTFY_PWR_DIR_CHANGE BIT(28) +#define UCSI_ENABLE_NTFY_CONNECTOR_CHANGE BIT(30) +#define UCSI_ENABLE_NTFY_ERROR BIT(31) #define UCSI_ENABLE_NTFY_ALL 0xdbe70000 /* SET_UOR command bits */ |