diff options
Diffstat (limited to 'drivers/usb')
28 files changed, 245 insertions, 94 deletions
diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 96f11715cd26..355dffcc23b0 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -494,7 +494,7 @@ static ssize_t usb_device_dump(char __user **buffer, size_t *nbytes, return 0; /* allocate 2^1 pages = 8K (on i386); * should be more than enough for one device */ - pages_start = (char *)__get_free_pages(GFP_KERNEL, 1); + pages_start = (char *)__get_free_pages(GFP_NOIO, 1); if (!pages_start) return -ENOMEM; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6e8bcdfd23b4..a678186f218f 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1312,9 +1312,9 @@ static int processcompl(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; - if (as->userbuffer) + if (as->userbuffer && urb->actual_length) if (copy_to_user(as->userbuffer, urb->transfer_buffer, - urb->transfer_buffer_length)) + urb->actual_length)) goto err_out; if (put_user(as->status, &userurb->status)) goto err_out; @@ -1334,14 +1334,11 @@ static int processcompl(struct async *as, void __user * __user *arg) } } - free_async(as); - if (put_user(addr, (void __user * __user *)arg)) return -EFAULT; return 0; err_out: - free_async(as); return -EFAULT; } @@ -1371,8 +1368,11 @@ static struct async *reap_as(struct dev_state *ps) static int proc_reapurb(struct dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); - if (as) - return processcompl(as, (void __user * __user *)arg); + if (as) { + int retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + return retval; + } if (signal_pending(current)) return -EINTR; return -EIO; @@ -1380,11 +1380,16 @@ static int proc_reapurb(struct dev_state *ps, void __user *arg) static int proc_reapurbnonblock(struct dev_state *ps, void __user *arg) { + int retval; struct async *as; - if (!(as = async_getcompleted(ps))) - return -EAGAIN; - return processcompl(as, (void __user * __user *)arg); + as = async_getcompleted(ps); + retval = -EAGAIN; + if (as) { + retval = processcompl(as, (void __user * __user *)arg); + free_async(as); + } + return retval; } #ifdef CONFIG_COMPAT @@ -1475,9 +1480,9 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) void __user *addr = as->userurb; unsigned int i; - if (as->userbuffer) + if (as->userbuffer && urb->actual_length) if (copy_to_user(as->userbuffer, urb->transfer_buffer, - urb->transfer_buffer_length)) + urb->actual_length)) return -EFAULT; if (put_user(as->status, &userurb->status)) return -EFAULT; @@ -1497,7 +1502,6 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) } } - free_async(as); if (put_user(ptr_to_compat(addr), (u32 __user *)arg)) return -EFAULT; return 0; @@ -1506,8 +1510,11 @@ static int processcompl_compat(struct async *as, void __user * __user *arg) static int proc_reapurb_compat(struct dev_state *ps, void __user *arg) { struct async *as = reap_as(ps); - if (as) - return processcompl_compat(as, (void __user * __user *)arg); + if (as) { + int retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + return retval; + } if (signal_pending(current)) return -EINTR; return -EIO; @@ -1515,11 +1522,16 @@ static int proc_reapurb_compat(struct dev_state *ps, void __user *arg) static int proc_reapurbnonblock_compat(struct dev_state *ps, void __user *arg) { + int retval; struct async *as; - if (!(as = async_getcompleted(ps))) - return -EAGAIN; - return processcompl_compat(as, (void __user * __user *)arg); + retval = -EAGAIN; + as = async_getcompleted(ps); + if (as) { + retval = processcompl_compat(as, (void __user * __user *)arg); + free_async(as); + } + return retval; } diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0495fa651225..80995ef0868c 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1684,6 +1684,24 @@ int usb_hcd_alloc_bandwidth(struct usb_device *udev, } } if (cur_alt && new_alt) { + struct usb_interface *iface = usb_ifnum_to_if(udev, + cur_alt->desc.bInterfaceNumber); + + if (iface->resetting_device) { + /* + * The USB core just reset the device, so the xHCI host + * and the device will think alt setting 0 is installed. + * However, the USB core will pass in the alternate + * setting installed before the reset as cur_alt. Dig + * out the alternate setting 0 structure, or the first + * alternate setting if a broken device doesn't have alt + * setting 0. + */ + cur_alt = usb_altnum_to_altsetting(iface, 0); + if (!cur_alt) + cur_alt = &iface->altsetting[0]; + } + /* Drop all the endpoints in the current alt setting */ for (i = 0; i < cur_alt->desc.bNumEndpoints; i++) { ret = hcd->driver->drop_endpoint(hcd, udev, diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 0cec6caf6e9b..35cc8b9ba1f5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3347,6 +3347,9 @@ static void hub_events(void) USB_PORT_FEAT_C_SUSPEND); udev = hdev->children[i-1]; if (udev) { + /* TRSMRCY = 10 msec */ + msleep(10); + usb_lock_device(udev); ret = remote_wakeup(hdev-> children[i-1]); @@ -3692,19 +3695,14 @@ static int usb_reset_and_verify_device(struct usb_device *udev) usb_enable_interface(udev, intf, true); ret = 0; } else { - /* We've just reset the device, so it will think alt - * setting 0 is installed. For usb_set_interface() to - * work properly, we need to set the current alternate - * interface setting to 0 (or the first alt setting, if - * the device doesn't have alt setting 0). + /* Let the bandwidth allocation function know that this + * device has been reset, and it will have to use + * alternate setting 0 as the current alternate setting. */ - intf->cur_altsetting = - usb_find_alt_setting(config, i, 0); - if (!intf->cur_altsetting) - intf->cur_altsetting = - &config->intf_cache[i]->altsetting[0]; + intf->resetting_device = 1; ret = usb_set_interface(udev, desc->bInterfaceNumber, desc->bAlternateSetting); + intf->resetting_device = 0; } if (ret < 0) { dev_err(&udev->dev, "failed to restore interface %d " diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 1b994846e8e0..9bc95fec793f 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -906,11 +906,11 @@ char *usb_cache_string(struct usb_device *udev, int index) if (index <= 0) return NULL; - buf = kmalloc(MAX_USB_STRING_SIZE, GFP_KERNEL); + buf = kmalloc(MAX_USB_STRING_SIZE, GFP_NOIO); if (buf) { len = usb_string(udev, index, buf, MAX_USB_STRING_SIZE); if (len > 0) { - smallbuf = kmalloc(++len, GFP_KERNEL); + smallbuf = kmalloc(++len, GFP_NOIO); if (!smallbuf) return buf; memcpy(smallbuf, buf, len); @@ -1731,7 +1731,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) if (cp) { nintf = cp->desc.bNumInterfaces; new_interfaces = kmalloc(nintf * sizeof(*new_interfaces), - GFP_KERNEL); + GFP_NOIO); if (!new_interfaces) { dev_err(&dev->dev, "Out of memory\n"); return -ENOMEM; @@ -1740,7 +1740,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration) for (; n < nintf; ++n) { new_interfaces[n] = kzalloc( sizeof(struct usb_interface), - GFP_KERNEL); + GFP_NOIO); if (!new_interfaces[n]) { dev_err(&dev->dev, "Out of memory\n"); ret = -ENOMEM; diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 485edf937f25..5f3908f6e2dc 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -115,6 +115,12 @@ show_speed(struct device *dev, struct device_attribute *attr, char *buf) case USB_SPEED_HIGH: speed = "480"; break; + case USB_SPEED_VARIABLE: + speed = "480"; + break; + case USB_SPEED_SUPER: + speed = "5000"; + break; default: speed = "unknown"; } diff --git a/drivers/usb/gadget/f_eem.c b/drivers/usb/gadget/f_eem.c index 0a577d5694fd..d4f0db58a8ad 100644 --- a/drivers/usb/gadget/f_eem.c +++ b/drivers/usb/gadget/f_eem.c @@ -358,7 +358,7 @@ done: * b15: bmType (0 == data) */ len = skb->len; - put_unaligned_le16((len & 0x3FFF) | BIT(14), skb_push(skb, 2)); + put_unaligned_le16(len & 0x3FFF, skb_push(skb, 2)); /* add a zero-length EEM packet, if needed */ if (padlen) @@ -464,7 +464,6 @@ static int eem_unwrap(struct gether *port, } /* validate CRC */ - crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); if (header & BIT(14)) { crc = get_unaligned_le32(skb->data + len - ETH_FCS_LEN); diff --git a/drivers/usb/gadget/multi.c b/drivers/usb/gadget/multi.c index 429560100b10..76496f5d272c 100644 --- a/drivers/usb/gadget/multi.c +++ b/drivers/usb/gadget/multi.c @@ -29,7 +29,7 @@ #if defined USB_ETH_RNDIS # undef USB_ETH_RNDIS #endif -#ifdef CONFIG_USB_ETH_RNDIS +#ifdef CONFIG_USB_G_MULTI_RNDIS # define USB_ETH_RNDIS y #endif diff --git a/drivers/usb/gadget/r8a66597-udc.c b/drivers/usb/gadget/r8a66597-udc.c index e220fb8091a3..8b45145b9136 100644 --- a/drivers/usb/gadget/r8a66597-udc.c +++ b/drivers/usb/gadget/r8a66597-udc.c @@ -26,6 +26,7 @@ #include <linux/io.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/usb/ch9.h> #include <linux/usb/gadget.h> diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 4b5dbd0127f5..5fc80a104150 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -2582,6 +2582,7 @@ err: hsotg->gadget.dev.driver = NULL; return ret; } +EXPORT_SYMBOL(usb_gadget_register_driver); int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) { diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 5859522d6edd..1ec3857f22e6 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -787,9 +787,10 @@ static irqreturn_t ehci_irq (struct usb_hcd *hcd) /* start 20 msec resume signaling from this port, * and make khubd collect PORT_STAT_C_SUSPEND to - * stop that signaling. + * stop that signaling. Use 5 ms extra for safety, + * like usb_port_resume() does. */ - ehci->reset_done [i] = jiffies + msecs_to_jiffies (20); + ehci->reset_done[i] = jiffies + msecs_to_jiffies(25); ehci_dbg (ehci, "port %d remote wakeup\n", i + 1); mod_timer(&hcd->rh_timer, ehci->reset_done[i]); } diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 2c6571c05f35..19372673bf09 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -120,9 +120,26 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) del_timer_sync(&ehci->watchdog); del_timer_sync(&ehci->iaa_watchdog); - port = HCS_N_PORTS (ehci->hcs_params); spin_lock_irq (&ehci->lock); + /* Once the controller is stopped, port resumes that are already + * in progress won't complete. Hence if remote wakeup is enabled + * for the root hub and any ports are in the middle of a resume or + * remote wakeup, we must fail the suspend. + */ + if (hcd->self.root_hub->do_remote_wakeup) { + port = HCS_N_PORTS(ehci->hcs_params); + while (port--) { + if (ehci->reset_done[port] != 0) { + spin_unlock_irq(&ehci->lock); + ehci_dbg(ehci, "suspend failed because " + "port %d is resuming\n", + port + 1); + return -EBUSY; + } + } + } + /* stop schedules, clean any completed work */ if (HC_IS_RUNNING(hcd->state)) { ehci_quiesce (ehci); @@ -138,6 +155,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) */ ehci->bus_suspended = 0; ehci->owned_ports = 0; + port = HCS_N_PORTS(ehci->hcs_params); while (port--) { u32 __iomem *reg = &ehci->regs->port_status [port]; u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS; @@ -178,7 +196,9 @@ static int ehci_bus_suspend (struct usb_hcd *hcd) if (hostpc_reg) { u32 t3; + spin_unlock_irq(&ehci->lock); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irq(&ehci->lock); t3 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, t3 | HOSTPC_PHCD, hostpc_reg); t3 = ehci_readl(ehci, hostpc_reg); @@ -886,17 +906,18 @@ static int ehci_hub_control ( if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) goto error; - ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); + /* After above check the port must be connected. * Set appropriate bit thus could put phy into low power * mode if we have hostpc feature */ + temp &= ~PORT_WKCONN_E; + temp |= PORT_WKDISC_E | PORT_WKOC_E; + ehci_writel(ehci, temp | PORT_SUSPEND, status_reg); if (hostpc_reg) { - temp &= ~PORT_WKCONN_E; - temp |= (PORT_WKDISC_E | PORT_WKOC_E); - ehci_writel(ehci, temp | PORT_SUSPEND, - status_reg); + spin_unlock_irqrestore(&ehci->lock, flags); msleep(5);/* 5ms for HCD enter low pwr mode */ + spin_lock_irqsave(&ehci->lock, flags); temp1 = ehci_readl(ehci, hostpc_reg); ehci_writel(ehci, temp1 | HOSTPC_PHCD, hostpc_reg); diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index a427d3b00634..89521775c567 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -849,9 +849,10 @@ qh_make ( * But interval 1 scheduling is simpler, and * includes high bandwidth. */ - dbg ("intr period %d uframes, NYET!", - urb->interval); - goto done; + urb->interval = 1; + } else if (qh->period > ehci->periodic_size) { + qh->period = ehci->periodic_size; + urb->interval = qh->period << 3; } } else { int think_time; @@ -874,6 +875,10 @@ qh_make ( usb_calc_bus_time (urb->dev->speed, is_input, 0, max_packet (maxp))); qh->period = urb->interval; + if (qh->period > ehci->periodic_size) { + qh->period = ehci->periodic_size; + urb->interval = qh->period; + } } } diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index 0951818ef93b..78e7c3cfcb72 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -242,9 +242,10 @@ err: static void fhci_usb_free(void *lld) { struct fhci_usb *usb = lld; - struct fhci_hcd *fhci = usb->fhci; + struct fhci_hcd *fhci; if (usb) { + fhci = usb->fhci; fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); fhci_ep0_free(usb); kfree(usb->actual_frame); diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c index d224ab467a40..e1232890c78b 100644 --- a/drivers/usb/host/fhci-tds.c +++ b/drivers/usb/host/fhci-tds.c @@ -105,7 +105,7 @@ void fhci_ep0_free(struct fhci_usb *usb) if (ep->td_base) cpm_muram_free(cpm_muram_offset(ep->td_base)); - if (ep->conf_frame_Q) { + if (kfifo_initialized(&ep->conf_frame_Q)) { size = cq_howmany(&ep->conf_frame_Q); for (; size; size--) { struct packet *pkt = cq_get(&ep->conf_frame_Q); @@ -115,7 +115,7 @@ void fhci_ep0_free(struct fhci_usb *usb) cq_delete(&ep->conf_frame_Q); } - if (ep->empty_frame_Q) { + if (kfifo_initialized(&ep->empty_frame_Q)) { size = cq_howmany(&ep->empty_frame_Q); for (; size; size--) { struct packet *pkt = cq_get(&ep->empty_frame_Q); @@ -125,7 +125,7 @@ void fhci_ep0_free(struct fhci_usb *usb) cq_delete(&ep->empty_frame_Q); } - if (ep->dummy_packets_Q) { + if (kfifo_initialized(&ep->dummy_packets_Q)) { size = cq_howmany(&ep->dummy_packets_Q); for (; size; size--) { u8 *buff = cq_get(&ep->dummy_packets_Q); diff --git a/drivers/usb/host/isp1362-hcd.c b/drivers/usb/host/isp1362-hcd.c index 73352f3739b5..42971657fde2 100644 --- a/drivers/usb/host/isp1362-hcd.c +++ b/drivers/usb/host/isp1362-hcd.c @@ -2270,10 +2270,10 @@ static int isp1362_mem_config(struct usb_hcd *hcd) dev_info(hcd->self.controller, "ISP1362 Memory usage:\n"); dev_info(hcd->self.controller, " ISTL: 2 * %4d: %4d @ $%04x:$%04x\n", istl_size / 2, istl_size, 0, istl_size / 2); - dev_info(hcd->self.controller, " INTL: %4d * (%3lu+8): %4d @ $%04x\n", + dev_info(hcd->self.controller, " INTL: %4d * (%3zu+8): %4d @ $%04x\n", ISP1362_INTL_BUFFERS, intl_blksize - PTD_HEADER_SIZE, intl_size, istl_size); - dev_info(hcd->self.controller, " ATL : %4d * (%3lu+8): %4d @ $%04x\n", + dev_info(hcd->self.controller, " ATL : %4d * (%3zu+8): %4d @ $%04x\n", atl_buffers, atl_blksize - PTD_HEADER_SIZE, atl_size, istl_size + intl_size); dev_info(hcd->self.controller, " USED/FREE: %4d %4d\n", total, @@ -2697,6 +2697,8 @@ static int __init isp1362_probe(struct platform_device *pdev) void __iomem *data_reg; int irq; int retval = 0; + struct resource *irq_res; + unsigned int irq_flags = 0; /* basic sanity checks first. board-specific init logic should * have initialized this the three resources and probably board @@ -2710,11 +2712,12 @@ static int __init isp1362_probe(struct platform_device *pdev) data = platform_get_resource(pdev, IORESOURCE_MEM, 0); addr = platform_get_resource(pdev, IORESOURCE_MEM, 1); - irq = platform_get_irq(pdev, 0); - if (!addr || !data || irq < 0) { + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!addr || !data || !irq_res) { retval = -ENODEV; goto err1; } + irq = irq_res->start; #ifdef CONFIG_USB_HCD_DMA if (pdev->dev.dma_mask) { @@ -2781,12 +2784,16 @@ static int __init isp1362_probe(struct platform_device *pdev) } #endif -#ifdef CONFIG_ARM - if (isp1362_hcd->board) - set_irq_type(irq, isp1362_hcd->board->int_act_high ? IRQT_RISING : IRQT_FALLING); -#endif + if (irq_res->flags & IORESOURCE_IRQ_HIGHEDGE) + irq_flags |= IRQF_TRIGGER_RISING; + if (irq_res->flags & IORESOURCE_IRQ_LOWEDGE) + irq_flags |= IRQF_TRIGGER_FALLING; + if (irq_res->flags & IORESOURCE_IRQ_HIGHLEVEL) + irq_flags |= IRQF_TRIGGER_HIGH; + if (irq_res->flags & IORESOURCE_IRQ_LOWLEVEL) + irq_flags |= IRQF_TRIGGER_LOW; - retval = usb_add_hcd(hcd, irq, IRQF_TRIGGER_LOW | IRQF_DISABLED | IRQF_SHARED); + retval = usb_add_hcd(hcd, irq, irq_flags | IRQF_DISABLED | IRQF_SHARED); if (retval != 0) goto err6; pr_info("%s, irq %d\n", hcd->product_desc, irq); diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 9600a58299db..27b8f7cb4471 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1039,12 +1039,12 @@ static void do_atl_int(struct usb_hcd *usb_hcd) if (!nakcount && (dw3 & DW3_QTD_ACTIVE)) { u32 buffstatus; - /* XXX + /* * NAKs are handled in HW by the chip. Usually if the * device is not able to send data fast enough. - * This did not trigger for a long time now. + * This happens mostly on slower hardware. */ - printk(KERN_ERR "Reloading ptd %p/%p... qh %p readed: " + printk(KERN_NOTICE "Reloading ptd %p/%p... qh %p read: " "%d of %zu done: %08x cur: %08x\n", qtd, urb, qh, PTD_XFERRED_LENGTH(dw3), qtd->length, done_map, diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index b7a661c02bcd..bee558aed427 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -35,7 +35,9 @@ #include <linux/usb.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/mm.h> #include <linux/irq.h> +#include <asm/cacheflush.h> #include "../core/hcd.h" #include "r8a66597.h" @@ -216,8 +218,17 @@ static void disable_controller(struct r8a66597 *r8a66597) { int port; + /* disable interrupts */ r8a66597_write(r8a66597, 0, INTENB0); - r8a66597_write(r8a66597, 0, INTSTS0); + r8a66597_write(r8a66597, 0, INTENB1); + r8a66597_write(r8a66597, 0, BRDYENB); + r8a66597_write(r8a66597, 0, BEMPENB); + r8a66597_write(r8a66597, 0, NRDYENB); + + /* clear status */ + r8a66597_write(r8a66597, 0, BRDYSTS); + r8a66597_write(r8a66597, 0, NRDYSTS); + r8a66597_write(r8a66597, 0, BEMPSTS); for (port = 0; port < r8a66597->max_root_hub; port++) r8a66597_disable_port(r8a66597, port); @@ -811,6 +822,26 @@ static void enable_r8a66597_pipe(struct r8a66597 *r8a66597, struct urb *urb, enable_r8a66597_pipe_dma(r8a66597, dev, pipe, urb); } +static void r8a66597_urb_done(struct r8a66597 *r8a66597, struct urb *urb, + int status) +__releases(r8a66597->lock) +__acquires(r8a66597->lock) +{ + if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) { + void *ptr; + + for (ptr = urb->transfer_buffer; + ptr < urb->transfer_buffer + urb->transfer_buffer_length; + ptr += PAGE_SIZE) + flush_dcache_page(virt_to_page(ptr)); + } + + usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb); + spin_unlock(&r8a66597->lock); + usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, status); + spin_lock(&r8a66597->lock); +} + /* this function must be called with interrupt disabled */ static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address) { @@ -829,15 +860,9 @@ static void force_dequeue(struct r8a66597 *r8a66597, u16 pipenum, u16 address) list_del(&td->queue); kfree(td); - if (urb) { - usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), - urb); + if (urb) + r8a66597_urb_done(r8a66597, urb, -ENODEV); - spin_unlock(&r8a66597->lock); - usb_hcd_giveback_urb(r8a66597_to_hcd(r8a66597), urb, - -ENODEV); - spin_lock(&r8a66597->lock); - } break; } } @@ -997,6 +1022,8 @@ static void start_root_hub_sampling(struct r8a66597 *r8a66597, int port, /* this function must be called with interrupt disabled */ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, u16 syssts) +__releases(r8a66597->lock) +__acquires(r8a66597->lock) { if (syssts == SE0) { r8a66597_write(r8a66597, ~ATTCH, get_intsts_reg(port)); @@ -1014,7 +1041,9 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); } + spin_unlock(&r8a66597->lock); usb_hcd_poll_rh_status(r8a66597_to_hcd(r8a66597)); + spin_lock(&r8a66597->lock); } /* this function must be called with interrupt disabled */ @@ -1274,10 +1303,7 @@ __releases(r8a66597->lock) __acquires(r8a66597->lock) if (usb_pipeisoc(urb->pipe)) urb->start_frame = r8a66597_get_frame(hcd); - usb_hcd_unlink_urb_from_ep(r8a66597_to_hcd(r8a66597), urb); - spin_unlock(&r8a66597->lock); - usb_hcd_giveback_urb(hcd, urb, status); - spin_lock(&r8a66597->lock); + r8a66597_urb_done(r8a66597, urb, status); } if (restart) { @@ -2466,6 +2492,12 @@ static int __devinit r8a66597_probe(struct platform_device *pdev) r8a66597->rh_timer.data = (unsigned long)r8a66597; r8a66597->reg = (unsigned long)reg; + /* make sure no interrupts are pending */ + ret = r8a66597_clock_enable(r8a66597); + if (ret < 0) + goto clean_up3; + disable_controller(r8a66597); + for (i = 0; i < R8A66597_MAX_NUM_PIPE; i++) { INIT_LIST_HEAD(&r8a66597->pipe_queue[i]); init_timer(&r8a66597->td_timer[i]); diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 5cd0e48f67fb..99cd00fd3514 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -749,7 +749,20 @@ static int uhci_rh_suspend(struct usb_hcd *hcd) spin_lock_irq(&uhci->lock); if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) rc = -ESHUTDOWN; - else if (!uhci->dead) + else if (uhci->dead) + ; /* Dead controllers tell no tales */ + + /* Once the controller is stopped, port resumes that are already + * in progress won't complete. Hence if remote wakeup is enabled + * for the root hub and any ports are in the middle of a resume or + * remote wakeup, we must fail the suspend. + */ + else if (hcd->self.root_hub->do_remote_wakeup && + uhci->resuming_ports) { + dev_dbg(uhci_dev(uhci), "suspend failed because a port " + "is resuming\n"); + rc = -EBUSY; + } else suspend_rh(uhci, UHCI_RH_SUSPENDED); spin_unlock_irq(&uhci->lock); return rc; diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c index 885b585360b9..8270055848ca 100644 --- a/drivers/usb/host/uhci-hub.c +++ b/drivers/usb/host/uhci-hub.c @@ -167,7 +167,7 @@ static void uhci_check_ports(struct uhci_hcd *uhci) /* Port received a wakeup request */ set_bit(port, &uhci->resuming_ports); uhci->ports_timeout = jiffies + - msecs_to_jiffies(20); + msecs_to_jiffies(25); /* Make sure we see the port again * after the resuming period is over. */ diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 0025847743f3..8b37a4b9839e 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3245,6 +3245,7 @@ static struct usb_device_id sisusb_table [] = { { USB_DEVICE(0x0711, 0x0902) }, { USB_DEVICE(0x0711, 0x0903) }, { USB_DEVICE(0x0711, 0x0918) }, + { USB_DEVICE(0x0711, 0x0920) }, { USB_DEVICE(0x182d, 0x021c) }, { USB_DEVICE(0x182d, 0x0269) }, { } diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index de56b3d743d7..3d2d3e549bd1 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -44,6 +44,7 @@ config ISP1301_OMAP config USB_ULPI bool "Generic ULPI Transceiver Driver" depends on ARM + select USB_OTG_UTILS help Enable this to support ULPI connected USB OTG transceivers which are likely found on embedded boards. diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 216f187582ab..7638828e7317 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -50,7 +50,7 @@ * Version Information */ #define DRIVER_VERSION "v1.5.0" -#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>" +#define DRIVER_AUTHOR "Greg Kroah-Hartman <greg@kroah.com>, Bill Ryder <bryder@sgi.com>, Kuba Ober <kuba@mareimbrium.org>, Andreas Mohr" #define DRIVER_DESC "USB FTDI Serial Converters Driver" static int debug; @@ -145,10 +145,15 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = { +/* + * Device ID not listed? Test via module params product/vendor or + * /sys/bus/usb/ftdi_sio/new_id, then send patch/report! + */ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_AMC232_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANUSB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CANDAPTER_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NXTCAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_0_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_1_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCS_DEVICE_2_PID) }, @@ -552,9 +557,16 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_IBS_PEDO_PID) }, { USB_DEVICE(FTDI_VID, FTDI_IBS_PROD_PID) }, /* - * Due to many user requests for multiple ELV devices we enable - * them by default. + * ELV devices: */ + { USB_DEVICE(FTDI_VID, FTDI_ELV_USR_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_MSM1_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_KL100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_EC3000_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS888_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TWS550_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FEM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_CLI7000_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_PPS7330_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_TFM100_PID) }, @@ -571,11 +583,17 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_ELV_PCK100_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_RFP500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FS20SIG_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UTP8_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS300PC_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS444PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_FHZ1300PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_EM1010PC_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_WS500_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ELV_HS485_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_UMS100_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_TFD128_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_FM3RX_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_ELV_WS777_PID) }, { USB_DEVICE(FTDI_VID, LINX_SDMUSBQSS_PID) }, { USB_DEVICE(FTDI_VID, LINX_MASTERDEVEL2_PID) }, { USB_DEVICE(FTDI_VID, LINX_FUTURE_0_PID) }, @@ -697,6 +715,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, + { USB_DEVICE(PAPOUCH_VID, PAPOUCH_AD4USB_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index da92b4952ffb..c8951aeed983 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -38,6 +38,8 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +#define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ + /* OOCDlink by Joern Kaipf <joernk@web.de> * (http://www.joernonline.de/dw/doku.php?id=start&idx=projects:oocdlink) */ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ @@ -161,22 +163,37 @@ /* * ELV USB devices submitted by Christian Abt of ELV (www.elv.de). * All of these devices use FTDI's vendor ID (0x0403). + * Further IDs taken from ELV Windows .inf file. * * The previously included PID for the UO 100 module was incorrect. * In fact, that PID was for ELV's UR 100 USB-RS232 converter (0xFB58). * * Armin Laeuger originally sent the PID for the UM 100 module. */ +#define FTDI_ELV_USR_PID 0xE000 /* ELV Universal-Sound-Recorder */ +#define FTDI_ELV_MSM1_PID 0xE001 /* ELV Mini-Sound-Modul */ +#define FTDI_ELV_KL100_PID 0xE002 /* ELV Kfz-Leistungsmesser KL 100 */ +#define FTDI_ELV_WS550_PID 0xE004 /* WS 550 */ +#define FTDI_ELV_EC3000_PID 0xE006 /* ENERGY CONTROL 3000 USB */ +#define FTDI_ELV_WS888_PID 0xE008 /* WS 888 */ +#define FTDI_ELV_TWS550_PID 0xE009 /* Technoline WS 550 */ +#define FTDI_ELV_FEM_PID 0xE00A /* Funk Energie Monitor */ #define FTDI_ELV_FHZ1300PC_PID 0xE0E8 /* FHZ 1300 PC */ #define FTDI_ELV_WS500_PID 0xE0E9 /* PC-Wetterstation (WS 500) */ #define FTDI_ELV_HS485_PID 0xE0EA /* USB to RS-485 adapter */ +#define FTDI_ELV_UMS100_PID 0xE0EB /* ELV USB Master-Slave Schaltsteckdose UMS 100 */ +#define FTDI_ELV_TFD128_PID 0xE0EC /* ELV Temperatur-Feuchte-Datenlogger TFD 128 */ +#define FTDI_ELV_FM3RX_PID 0xE0ED /* ELV Messwertuebertragung FM3 RX */ +#define FTDI_ELV_WS777_PID 0xE0EE /* Conrad WS 777 */ #define FTDI_ELV_EM1010PC_PID 0xE0EF /* Engery monitor EM 1010 PC */ #define FTDI_ELV_CSI8_PID 0xE0F0 /* Computer-Schalt-Interface (CSI 8) */ #define FTDI_ELV_EM1000DL_PID 0xE0F1 /* PC-Datenlogger fuer Energiemonitor (EM 1000 DL) */ #define FTDI_ELV_PCK100_PID 0xE0F2 /* PC-Kabeltester (PCK 100) */ #define FTDI_ELV_RFP500_PID 0xE0F3 /* HF-Leistungsmesser (RFP 500) */ #define FTDI_ELV_FS20SIG_PID 0xE0F4 /* Signalgeber (FS 20 SIG) */ +#define FTDI_ELV_UTP8_PID 0xE0F5 /* ELV UTP 8 */ #define FTDI_ELV_WS300PC_PID 0xE0F6 /* PC-Wetterstation (WS 300 PC) */ +#define FTDI_ELV_WS444PC_PID 0xE0F7 /* Conrad WS 444 PC */ #define FTDI_PHI_FISCO_PID 0xE40B /* PHI Fisco USB to Serial cable */ #define FTDI_ELV_UAD8_PID 0xF068 /* USB-AD-Wandler (UAD 8) */ #define FTDI_ELV_UDA7_PID 0xF069 /* USB-DA-Wandler (UDA 7) */ @@ -968,6 +985,7 @@ #define PAPOUCH_VID 0x5050 /* Vendor ID */ #define PAPOUCH_TMU_PID 0x0400 /* TMU USB Thermometer */ #define PAPOUCH_QUIDO4x4_PID 0x0900 /* Quido 4/4 Module */ +#define PAPOUCH_AD4USB_PID 0x8003 /* AD4USB Measurement Module */ /* * Marvell SheevaPlug diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index f1ea3a33b6e6..83443d6306d6 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -386,12 +386,12 @@ int usb_serial_generic_chars_in_buffer(struct tty_struct *tty) dbg("%s - port %d", __func__, port->number); - if (serial->type->max_in_flight_urbs) { - spin_lock_irqsave(&port->lock, flags); + spin_lock_irqsave(&port->lock, flags); + if (serial->type->max_in_flight_urbs) chars = port->tx_bytes_flight; - spin_unlock_irqrestore(&port->lock, flags); - } else if (serial->num_bulk_out) + else if (serial->num_bulk_out) chars = kfifo_len(&port->write_fifo); + spin_unlock_irqrestore(&port->lock, flags); dbg("%s - returns %d", __func__, chars); return chars; @@ -489,6 +489,8 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) dbg("%s - port %d", __func__, port->number); if (port->serial->type->max_in_flight_urbs) { + kfree(urb->transfer_buffer); + spin_lock_irqsave(&port->lock, flags); --port->urbs_in_flight; port->tx_bytes_flight -= urb->transfer_buffer_length; diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ac1b6449fb6a..3eb6143bb646 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -298,6 +298,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x1199, 0x68A3), /* Sierra Wireless Direct IP modems */ .driver_info = (kernel_ulong_t)&direct_ip_interface_blacklist }, + { USB_DEVICE(0x413C, 0x08133) }, /* Dell Computer Corp. Wireless 5720 VZW Mobile Broadband (EVDO Rev-A) Minicard GPS Port */ { } }; diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 64a0a2c27e12..49575fba3756 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -941,7 +941,7 @@ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, UNUSUAL_DEV( 0x07af, 0x0004, 0x0100, 0x0133, "Microtech", "USB-SCSI-DB25", - US_SC_SCSI, US_PR_BULK, usb_stor_euscsi_init, + US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, @@ -1807,13 +1807,6 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_GO_SLOW ), -/* Reported by Rohan Hart <rohan.hart17@gmail.com> */ -UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, - "INTOVA", - "Pixtreme", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), - /* Reported by Frederic Marchal <frederic.marchal@wowcompany.com> * Mio Moov 330 */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 5a53d4f0dd11..e9f995486ec1 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -434,7 +434,8 @@ static void adjust_quirks(struct us_data *us) u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor); u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct); unsigned f = 0; - unsigned int mask = (US_FL_SANE_SENSE | US_FL_FIX_CAPACITY | + unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | + US_FL_FIX_CAPACITY | US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE | US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | |