summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/core/hcd.c2
-rw-r--r--drivers/usb/core/hub.c97
-rw-r--r--drivers/usb/core/hub.h4
-rw-r--r--drivers/usb/core/port.c6
4 files changed, 72 insertions, 37 deletions
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index b81407518fdf..bec31e2efb88 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2267,9 +2267,7 @@ static void hcd_resume_work(struct work_struct *work)
struct usb_hcd *hcd = container_of(work, struct usb_hcd, wakeup_work);
struct usb_device *udev = hcd->self.root_hub;
- usb_lock_device(udev);
usb_remote_wakeup(udev);
- usb_unlock_device(udev);
}
/**
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 988f227e796f..d43054e8e257 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -2781,6 +2781,20 @@ static int port_is_power_on(struct usb_hub *hub, unsigned portstatus)
return ret;
}
+static void usb_lock_port(struct usb_port *port_dev)
+ __acquires(&port_dev->status_lock)
+{
+ mutex_lock(&port_dev->status_lock);
+ __acquire(&port_dev->status_lock);
+}
+
+static void usb_unlock_port(struct usb_port *port_dev)
+ __releases(&port_dev->status_lock)
+{
+ mutex_unlock(&port_dev->status_lock);
+ __release(&port_dev->status_lock);
+}
+
#ifdef CONFIG_PM
/* Check if a port is suspended(USB2.0 port) or in U3 state(USB3.0 port) */
@@ -3003,6 +3017,8 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
int status;
bool really_suspend = true;
+ usb_lock_port(port_dev);
+
/* enable remote wakeup when appropriate; this lets the device
* wake up the upstream hub (including maybe the root hub).
*
@@ -3096,6 +3112,8 @@ int usb_port_suspend(struct usb_device *udev, pm_message_t msg)
pm_runtime_put_sync(&port_dev->dev);
usb_mark_last_busy(hub->hdev);
+
+ usb_unlock_port(port_dev);
return status;
}
@@ -3244,13 +3262,13 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
}
}
+ usb_lock_port(port_dev);
+
/* Skip the initial Clear-Suspend step for a remote wakeup */
status = hub_port_status(hub, port1, &portstatus, &portchange);
if (status == 0 && !port_is_suspended(hub, portstatus))
goto SuspendCleared;
- set_bit(port1, hub->busy_bits);
-
/* see 7.1.7.7; affects power usage, but not budgeting */
if (hub_is_superspeed(hub->hdev))
status = hub_set_port_link_state(hub, port1, USB_SS_PORT_LS_U0);
@@ -3289,8 +3307,6 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
}
}
- clear_bit(port1, hub->busy_bits);
-
status = check_port_resume_type(udev,
hub, port1, status, portchange, portstatus);
if (status == 0)
@@ -3308,16 +3324,18 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
usb_unlocked_enable_lpm(udev);
}
+ usb_unlock_port(port_dev);
+
return status;
}
#ifdef CONFIG_PM_RUNTIME
-/* caller has locked udev */
int usb_remote_wakeup(struct usb_device *udev)
{
int status = 0;
+ usb_lock_device(udev);
if (udev->state == USB_STATE_SUSPENDED) {
dev_dbg(&udev->dev, "usb %sresume\n", "wakeup-");
status = usb_autoresume_device(udev);
@@ -3326,6 +3344,7 @@ int usb_remote_wakeup(struct usb_device *udev)
usb_autosuspend_device(udev);
}
}
+ usb_unlock_device(udev);
return status;
}
@@ -4030,9 +4049,10 @@ static int hub_enable_device(struct usb_device *udev)
* Returns device in USB_STATE_ADDRESS, except on error.
*
* If this is called for an already-existing device (as part of
- * usb_reset_and_verify_device), the caller must own the device lock. For a
- * newly detected device that is not accessible through any global
- * pointers, it's not necessary to lock the device.
+ * usb_reset_and_verify_device), the caller must own the device lock and
+ * the port lock. For a newly detected device that is not accessible
+ * through any global pointers, it's not necessary to lock the device,
+ * but it is still necessary to lock the port.
*/
static int
hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1,
@@ -4502,7 +4522,9 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus,
}
/* reset (non-USB 3.0 devices) and get descriptor */
+ usb_lock_port(port_dev);
status = hub_port_init(hub, udev, port1, i);
+ usb_unlock_port(port_dev);
if (status < 0)
goto loop;
@@ -4624,6 +4646,7 @@ done:
*/
static void hub_port_connect_change(struct usb_hub *hub, int port1,
u16 portstatus, u16 portchange)
+ __must_hold(&port_dev->status_lock)
{
struct usb_port *port_dev = hub->ports[port1 - 1];
struct usb_device *udev = port_dev->child;
@@ -4655,26 +4678,29 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1,
/* For a suspended device, treat this as a
* remote wakeup event.
*/
- usb_lock_device(udev);
+ usb_unlock_port(port_dev);
status = usb_remote_wakeup(udev);
- usb_unlock_device(udev);
+ usb_lock_port(port_dev);
#endif
} else {
/* Don't resuscitate */;
}
-
}
clear_bit(port1, hub->change_bits);
+ /* successfully revalidated the connection */
if (status == 0)
return;
+ usb_unlock_port(port_dev);
hub_port_connect(hub, port1, portstatus, portchange);
+ usb_lock_port(port_dev);
}
/* Returns 1 if there was a remote wakeup and a connect status change. */
static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
u16 portstatus, u16 portchange)
+ __must_hold(&port_dev->status_lock)
{
struct usb_port *port_dev = hub->ports[port - 1];
struct usb_device *hdev;
@@ -4699,9 +4725,9 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
/* TRSMRCY = 10 msec */
msleep(10);
- usb_lock_device(udev);
+ usb_unlock_port(port_dev);
ret = usb_remote_wakeup(udev);
- usb_unlock_device(udev);
+ usb_lock_port(port_dev);
if (ret < 0)
connect_change = 1;
} else {
@@ -4713,6 +4739,7 @@ static int hub_handle_remote_wakeup(struct usb_hub *hub, unsigned int port,
}
static void port_event(struct usb_hub *hub, int port1)
+ __must_hold(&port_dev->status_lock)
{
int connect_change, reset_device = 0;
struct usb_port *port_dev = hub->ports[port1 - 1];
@@ -4820,9 +4847,11 @@ static void port_event(struct usb_hub *hub, int port1)
if (reset_device || (udev && hub_is_superspeed(hub->hdev)
&& (portchange & USB_PORT_STAT_C_LINK_STATE)
&& (portstatus & USB_PORT_STAT_CONNECTION))) {
+ usb_unlock_port(port_dev);
usb_lock_device(udev);
usb_reset_device(udev);
usb_unlock_device(udev);
+ usb_lock_port(port_dev);
connect_change = 0;
}
@@ -4916,10 +4945,9 @@ static void hub_events(void)
for (i = 1; i <= hdev->maxchild; i++) {
struct usb_port *port_dev = hub->ports[i - 1];
- if (!test_bit(i, hub->busy_bits)
- && (test_bit(i, hub->event_bits)
- || test_bit(i, hub->change_bits)
- || test_bit(i, hub->wakeup_bits))) {
+ if (test_bit(i, hub->event_bits)
+ || test_bit(i, hub->change_bits)
+ || test_bit(i, hub->wakeup_bits)) {
/*
* The get_noresume and barrier ensure that if
* the port was in the process of resuming, we
@@ -4931,7 +4959,9 @@ static void hub_events(void)
*/
pm_runtime_get_noresume(&port_dev->dev);
pm_runtime_barrier(&port_dev->dev);
+ usb_lock_port(port_dev);
port_event(hub, i);
+ usb_unlock_port(port_dev);
pm_runtime_put_sync(&port_dev->dev);
}
}
@@ -5169,15 +5199,18 @@ static int descriptors_changed(struct usb_device *udev,
* if the reset wasn't even attempted.
*
* Note:
- * The caller must own the device lock. For example, it's safe to use
- * this from a driver probe() routine after downloading new firmware.
- * For calls that might not occur during probe(), drivers should lock
- * the device using usb_lock_device_for_reset().
+ * The caller must own the device lock and the port lock, the latter is
+ * taken by usb_reset_device(). For example, it's safe to use
+ * usb_reset_device() from a driver probe() routine after downloading
+ * new firmware. For calls that might not occur during probe(), drivers
+ * should lock the device using usb_lock_device_for_reset().
*
* Locking exception: This routine may also be called from within an
* autoresume handler. Such usage won't conflict with other tasks
* holding the device lock because these tasks should always call
- * usb_autopm_resume_device(), thereby preventing any unwanted autoresume.
+ * usb_autopm_resume_device(), thereby preventing any unwanted
+ * autoresume. The autoresume handler is expected to have already
+ * acquired the port lock before calling this routine.
*/
static int usb_reset_and_verify_device(struct usb_device *udev)
{
@@ -5196,11 +5229,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
return -EINVAL;
}
- if (!parent_hdev) {
- /* this requires hcd-specific logic; see ohci_restart() */
- dev_dbg(&udev->dev, "%s for root hub!\n", __func__);
+ if (!parent_hdev)
return -EISDIR;
- }
+
parent_hub = usb_hub_to_struct_hub(parent_hdev);
/* Disable USB2 hardware LPM.
@@ -5229,7 +5260,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
goto re_enumerate;
}
- set_bit(port1, parent_hub->busy_bits);
for (i = 0; i < SET_CONFIG_TRIES; ++i) {
/* ep0 maxpacket size may change; let the HCD know about it.
@@ -5239,7 +5269,6 @@ static int usb_reset_and_verify_device(struct usb_device *udev)
if (ret >= 0 || ret == -ENOTCONN || ret == -ENODEV)
break;
}
- clear_bit(port1, parent_hub->busy_bits);
if (ret < 0)
goto re_enumerate;
@@ -5360,7 +5389,9 @@ int usb_reset_device(struct usb_device *udev)
int ret;
int i;
unsigned int noio_flag;
+ struct usb_port *port_dev;
struct usb_host_config *config = udev->actconfig;
+ struct usb_hub *hub = usb_hub_to_struct_hub(udev->parent);
if (udev->state == USB_STATE_NOTATTACHED ||
udev->state == USB_STATE_SUSPENDED) {
@@ -5369,6 +5400,14 @@ int usb_reset_device(struct usb_device *udev)
return -EINVAL;
}
+ if (!udev->parent) {
+ /* this requires hcd-specific logic; see ohci_restart() */
+ dev_dbg(&udev->dev, "%s for root hub!\n", __func__);
+ return -EISDIR;
+ }
+
+ port_dev = hub->ports[udev->portnum - 1];
+
/*
* Don't allocate memory with GFP_KERNEL in current
* context to avoid possible deadlock if usb mass
@@ -5402,7 +5441,9 @@ int usb_reset_device(struct usb_device *udev)
}
}
+ usb_lock_port(port_dev);
ret = usb_reset_and_verify_device(udev);
+ usb_unlock_port(port_dev);
if (config) {
for (i = config->desc.bNumInterfaces - 1; i >= 0; --i) {
diff --git a/drivers/usb/core/hub.h b/drivers/usb/core/hub.h
index 906c355e0631..0a7cdc0ef0a9 100644
--- a/drivers/usb/core/hub.h
+++ b/drivers/usb/core/hub.h
@@ -45,8 +45,6 @@ struct usb_hub {
unsigned long event_bits[1]; /* status change bitmask */
unsigned long change_bits[1]; /* ports with logical connect
status change */
- unsigned long busy_bits[1]; /* ports being reset or
- resumed */
unsigned long removed_bits[1]; /* ports with a "removed"
device present */
unsigned long wakeup_bits[1]; /* ports that have signaled
@@ -88,6 +86,7 @@ struct usb_hub {
* @peer: related usb2 and usb3 ports (share the same connector)
* @connect_type: port's connect type
* @location: opaque representation of platform connector location
+ * @status_lock: synchronize port_event() vs usb_port_{suspend|resume}
* @portnum: port index num based one
* @is_superspeed cache super-speed status
*/
@@ -98,6 +97,7 @@ struct usb_port {
struct usb_port *peer;
enum usb_port_connect_type connect_type;
usb_port_location_t location;
+ struct mutex status_lock;
u8 portnum;
unsigned int is_superspeed:1;
};
diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c
index fb83c2c13920..8b1655700104 100644
--- a/drivers/usb/core/port.c
+++ b/drivers/usb/core/port.c
@@ -95,8 +95,6 @@ static int usb_port_runtime_resume(struct device *dev)
pm_runtime_get_sync(&peer->dev);
usb_autopm_get_interface(intf);
- set_bit(port1, hub->busy_bits);
-
retval = usb_hub_set_port_power(hdev, hub, port1, true);
msleep(hub_power_on_good_delay(hub));
if (port_dev->child && !retval) {
@@ -113,7 +111,6 @@ static int usb_port_runtime_resume(struct device *dev)
retval = 0;
}
- clear_bit(port1, hub->busy_bits);
usb_autopm_put_interface(intf);
return retval;
@@ -139,12 +136,10 @@ static int usb_port_runtime_suspend(struct device *dev)
return -EAGAIN;
usb_autopm_get_interface(intf);
- set_bit(port1, hub->busy_bits);
retval = usb_hub_set_port_power(hdev, hub, port1, false);
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_CONNECTION);
if (!port_dev->is_superspeed)
usb_clear_port_feature(hdev, port1, USB_PORT_FEAT_C_ENABLE);
- clear_bit(port1, hub->busy_bits);
usb_autopm_put_interface(intf);
/*
@@ -400,6 +395,7 @@ int usb_hub_create_port_device(struct usb_hub *hub, int port1)
port_dev->is_superspeed = 1;
dev_set_name(&port_dev->dev, "%s-port%d", dev_name(&hub->hdev->dev),
port1);
+ mutex_init(&port_dev->status_lock);
retval = device_register(&port_dev->dev);
if (retval)
goto error_register;
generated by cgit (git 2.34.1) at 2024-06-29 19:55:12 +0000