summaryrefslogtreecommitdiff
path: root/drivers/usb
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb')
-rw-r--r--drivers/usb/class/cdc-wdm.c2
-rw-r--r--drivers/usb/core/hcd-pci.c2
-rw-r--r--drivers/usb/core/message.c11
-rw-r--r--drivers/usb/core/quirks.c7
-rw-r--r--drivers/usb/dwc3/gadget.c1
-rw-r--r--drivers/usb/host/u132-hcd.c2
-rw-r--r--drivers/usb/host/xhci-plat.c27
-rw-r--r--drivers/usb/host/xhci.c30
-rw-r--r--drivers/usb/misc/uss720.c4
-rw-r--r--drivers/usb/misc/yurex.c8
-rw-r--r--drivers/usb/mtu3/mtu3_core.c6
-rw-r--r--drivers/usb/mtu3/mtu3_hw_regs.h1
-rw-r--r--drivers/usb/storage/scsiglue.c9
-rw-r--r--drivers/usb/storage/uas.c21
-rw-r--r--drivers/usb/storage/unusual_devs.h7
-rw-r--r--drivers/usb/typec/bus.c7
-rw-r--r--drivers/usb/typec/class.c1
17 files changed, 121 insertions, 25 deletions
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index bec581fb7c63..656d247819c9 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -460,7 +460,7 @@ static int service_outstanding_interrupt(struct wdm_device *desc)
set_bit(WDM_RESPONDING, &desc->flags);
spin_unlock_irq(&desc->iuspin);
- rv = usb_submit_urb(desc->response, GFP_KERNEL);
+ rv = usb_submit_urb(desc->response, GFP_ATOMIC);
spin_lock_irq(&desc->iuspin);
if (rv) {
dev_err(&desc->intf->dev,
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 66fe1b78d952..03432467b05f 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -515,8 +515,6 @@ static int resume_common(struct device *dev, int event)
event == PM_EVENT_RESTORE);
if (retval) {
dev_err(dev, "PCI post-resume error %d!\n", retval);
- if (hcd->shared_hcd)
- usb_hc_died(hcd->shared_hcd);
usb_hc_died(hcd);
}
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 228672f2c4a1..bfa5eda0cc26 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1341,6 +1341,11 @@ void usb_enable_interface(struct usb_device *dev,
* is submitted that needs that bandwidth. Some other operating systems
* allocate bandwidth early, when a configuration is chosen.
*
+ * xHCI reserves bandwidth and configures the alternate setting in
+ * usb_hcd_alloc_bandwidth(). If it fails the original interface altsetting
+ * may be disabled. Drivers cannot rely on any particular alternate
+ * setting being in effect after a failure.
+ *
* This call is synchronous, and may not be used in an interrupt context.
* Also, drivers must not change altsettings while urbs are scheduled for
* endpoints in that interface; all such urbs must first be completed
@@ -1376,6 +1381,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
alternate);
return -EINVAL;
}
+ /*
+ * usb3 hosts configure the interface in usb_hcd_alloc_bandwidth,
+ * including freeing dropped endpoint ring buffers.
+ * Make sure the interface endpoints are flushed before that
+ */
+ usb_disable_interface(dev, iface, false);
/* Make sure we have enough bandwidth for this alternate interface.
* Remove the current alt setting and add the new alt setting.
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 097057d2eacf..e77dfe5ed5ec 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -178,6 +178,10 @@ static const struct usb_device_id usb_quirk_list[] = {
/* CBM - Flash disk */
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */
+ { USB_DEVICE(0x0218, 0x0201), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* WORLDE easy key (easykey.25) MIDI controller */
{ USB_DEVICE(0x0218, 0x0401), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
@@ -406,6 +410,9 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x2040, 0x7200), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* DJI CineSSD */
+ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 032ea7d709ba..2b53194081ba 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -473,7 +473,6 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3_ep *dep)
/**
* dwc3_gadget_start_config - configure ep resources
- * @dwc: pointer to our controller context structure
* @dep: endpoint that is being enabled
*
* Issue a %DWC3_DEPCMD_DEPSTARTCFG command to @dep. After the command's
diff --git a/drivers/usb/host/u132-hcd.c b/drivers/usb/host/u132-hcd.c
index 072bd5d5738e..5b8a3d9530c4 100644
--- a/drivers/usb/host/u132-hcd.c
+++ b/drivers/usb/host/u132-hcd.c
@@ -2555,7 +2555,7 @@ static int u132_get_frame(struct usb_hcd *hcd)
} else {
int frame = 0;
dev_err(&u132->platform_dev->dev, "TODO: u132_get_frame\n");
- msleep(100);
+ mdelay(100);
return frame;
}
}
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 8dc77e34a859..94e939249b2b 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -153,7 +153,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
{
const struct xhci_plat_priv *priv_match;
const struct hc_driver *driver;
- struct device *sysdev;
+ struct device *sysdev, *tmpdev;
struct xhci_hcd *xhci;
struct resource *res;
struct usb_hcd *hcd;
@@ -273,19 +273,24 @@ static int xhci_plat_probe(struct platform_device *pdev)
goto disable_clk;
}
- if (device_property_read_bool(sysdev, "usb2-lpm-disable"))
- xhci->quirks |= XHCI_HW_LPM_DISABLE;
+ /* imod_interval is the interrupt moderation value in nanoseconds. */
+ xhci->imod_interval = 40000;
- if (device_property_read_bool(sysdev, "usb3-lpm-capable"))
- xhci->quirks |= XHCI_LPM_SUPPORT;
+ /* Iterate over all parent nodes for finding quirks */
+ for (tmpdev = &pdev->dev; tmpdev; tmpdev = tmpdev->parent) {
- if (device_property_read_bool(&pdev->dev, "quirk-broken-port-ped"))
- xhci->quirks |= XHCI_BROKEN_PORT_PED;
+ if (device_property_read_bool(tmpdev, "usb2-lpm-disable"))
+ xhci->quirks |= XHCI_HW_LPM_DISABLE;
- /* imod_interval is the interrupt moderation value in nanoseconds. */
- xhci->imod_interval = 40000;
- device_property_read_u32(sysdev, "imod-interval-ns",
- &xhci->imod_interval);
+ if (device_property_read_bool(tmpdev, "usb3-lpm-capable"))
+ xhci->quirks |= XHCI_LPM_SUPPORT;
+
+ if (device_property_read_bool(tmpdev, "quirk-broken-port-ped"))
+ xhci->quirks |= XHCI_BROKEN_PORT_PED;
+
+ device_property_read_u32(tmpdev, "imod-interval-ns",
+ &xhci->imod_interval);
+ }
hcd->usb_phy = devm_usb_get_phy_by_phandle(sysdev, "usb-phy", 0);
if (IS_ERR(hcd->usb_phy)) {
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 61f48b17e57b..0420eefa647a 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -37,6 +37,21 @@ static unsigned long long quirks;
module_param(quirks, ullong, S_IRUGO);
MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default");
+static bool td_on_ring(struct xhci_td *td, struct xhci_ring *ring)
+{
+ struct xhci_segment *seg = ring->first_seg;
+
+ if (!td || !td->start_seg)
+ return false;
+ do {
+ if (seg == td->start_seg)
+ return true;
+ seg = seg->next;
+ } while (seg && seg != ring->first_seg);
+
+ return false;
+}
+
/* TODO: copied from ehci-hcd.c - can this be refactored? */
/*
* xhci_handshake - spin reading hc until handshake completes or fails
@@ -1571,6 +1586,21 @@ static int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
goto done;
}
+ /*
+ * check ring is not re-allocated since URB was enqueued. If it is, then
+ * make sure none of the ring related pointers in this URB private data
+ * are touched, such as td_list, otherwise we overwrite freed data
+ */
+ if (!td_on_ring(&urb_priv->td[0], ep_ring)) {
+ xhci_err(xhci, "Canceled URB td not found on endpoint ring");
+ for (i = urb_priv->num_tds_done; i < urb_priv->num_tds; i++) {
+ td = &urb_priv->td[i];
+ if (!list_empty(&td->cancelled_td_list))
+ list_del_init(&td->cancelled_td_list);
+ }
+ goto err_giveback;
+ }
+
if (xhci->xhc_state & XHCI_STATE_HALTED) {
xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb,
"HC halted, freeing TD manually.");
diff --git a/drivers/usb/misc/uss720.c b/drivers/usb/misc/uss720.c
index 82f220631bd7..b5d661644263 100644
--- a/drivers/usb/misc/uss720.c
+++ b/drivers/usb/misc/uss720.c
@@ -369,7 +369,7 @@ static unsigned char parport_uss720_frob_control(struct parport *pp, unsigned ch
mask &= 0x0f;
val &= 0x0f;
d = (priv->reg[1] & (~mask)) ^ val;
- if (set_1284_register(pp, 2, d, GFP_KERNEL))
+ if (set_1284_register(pp, 2, d, GFP_ATOMIC))
return 0;
priv->reg[1] = d;
return d & 0xf;
@@ -379,7 +379,7 @@ static unsigned char parport_uss720_read_status(struct parport *pp)
{
unsigned char ret;
- if (get_1284_register(pp, 1, &ret, GFP_KERNEL))
+ if (get_1284_register(pp, 1, &ret, GFP_ATOMIC))
return 0;
return ret & 0xf8;
}
diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c
index 3be40eaa1ac9..6d9fd5f64903 100644
--- a/drivers/usb/misc/yurex.c
+++ b/drivers/usb/misc/yurex.c
@@ -413,6 +413,9 @@ static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count,
spin_unlock_irqrestore(&dev->lock, flags);
mutex_unlock(&dev->io_mutex);
+ if (WARN_ON_ONCE(len >= sizeof(in_buffer)))
+ return -EIO;
+
return simple_read_from_buffer(buffer, count, ppos, in_buffer, len);
}
@@ -421,13 +424,13 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer,
{
struct usb_yurex *dev;
int i, set = 0, retval = 0;
- char buffer[16];
+ char buffer[16 + 1];
char *data = buffer;
unsigned long long c, c2 = 0;
signed long timeout = 0;
DEFINE_WAIT(wait);
- count = min(sizeof(buffer), count);
+ count = min(sizeof(buffer) - 1, count);
dev = file->private_data;
/* verify that we actually have some data to write */
@@ -446,6 +449,7 @@ static ssize_t yurex_write(struct file *file, const char __user *user_buffer,
retval = -EFAULT;
goto error;
}
+ buffer[count] = 0;
memset(dev->cntl_buffer, CMD_PADDING, YUREX_BUF_SIZE);
switch (buffer[0]) {
diff --git a/drivers/usb/mtu3/mtu3_core.c b/drivers/usb/mtu3/mtu3_core.c
index eecfd0671362..d045d8458f81 100644
--- a/drivers/usb/mtu3/mtu3_core.c
+++ b/drivers/usb/mtu3/mtu3_core.c
@@ -107,8 +107,12 @@ static int mtu3_device_enable(struct mtu3 *mtu)
(SSUSB_U2_PORT_DIS | SSUSB_U2_PORT_PDN |
SSUSB_U2_PORT_HOST_SEL));
- if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG)
+ if (mtu->ssusb->dr_mode == USB_DR_MODE_OTG) {
mtu3_setbits(ibase, SSUSB_U2_CTRL(0), SSUSB_U2_PORT_OTG_SEL);
+ if (mtu->is_u3_ip)
+ mtu3_setbits(ibase, SSUSB_U3_CTRL(0),
+ SSUSB_U3_PORT_DUAL_MODE);
+ }
return ssusb_check_clocks(mtu->ssusb, check_clk);
}
diff --git a/drivers/usb/mtu3/mtu3_hw_regs.h b/drivers/usb/mtu3/mtu3_hw_regs.h
index 6ee371478d89..a45bb253939f 100644
--- a/drivers/usb/mtu3/mtu3_hw_regs.h
+++ b/drivers/usb/mtu3/mtu3_hw_regs.h
@@ -459,6 +459,7 @@
/* U3D_SSUSB_U3_CTRL_0P */
#define SSUSB_U3_PORT_SSP_SPEED BIT(9)
+#define SSUSB_U3_PORT_DUAL_MODE BIT(7)
#define SSUSB_U3_PORT_HOST_SEL BIT(2)
#define SSUSB_U3_PORT_PDN BIT(1)
#define SSUSB_U3_PORT_DIS BIT(0)
diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c
index c267f2812a04..e227bb5b794f 100644
--- a/drivers/usb/storage/scsiglue.c
+++ b/drivers/usb/storage/scsiglue.c
@@ -376,6 +376,15 @@ static int queuecommand_lck(struct scsi_cmnd *srb,
return 0;
}
+ if ((us->fflags & US_FL_NO_ATA_1X) &&
+ (srb->cmnd[0] == ATA_12 || srb->cmnd[0] == ATA_16)) {
+ memcpy(srb->sense_buffer, usb_stor_sense_invalidCDB,
+ sizeof(usb_stor_sense_invalidCDB));
+ srb->result = SAM_STAT_CHECK_CONDITION;
+ done(srb);
+ return 0;
+ }
+
/* enqueue the command and wake up the control thread */
srb->scsi_done = done;
us->srb = srb;
diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index 9e9de5452860..1f7b401c4d04 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -842,6 +842,27 @@ static int uas_slave_configure(struct scsi_device *sdev)
sdev->skip_ms_page_8 = 1;
sdev->wce_default_on = 1;
}
+
+ /*
+ * Some disks return the total number of blocks in response
+ * to READ CAPACITY rather than the highest block number.
+ * If this device makes that mistake, tell the sd driver.
+ */
+ if (devinfo->flags & US_FL_FIX_CAPACITY)
+ sdev->fix_capacity = 1;
+
+ /*
+ * Some devices don't like MODE SENSE with page=0x3f,
+ * which is the command used for checking if a device
+ * is write-protected. Now that we tell the sd driver
+ * to do a 192-byte transfer with this command the
+ * majority of devices work fine, but a few still can't
+ * handle it. The sd driver will simply assume those
+ * devices are write-enabled.
+ */
+ if (devinfo->flags & US_FL_NO_WP_DETECT)
+ sdev->skip_ms_page_3f = 1;
+
scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
return 0;
}
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 22fcfccf453a..f7f83b21dc74 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -2288,6 +2288,13 @@ UNUSUAL_DEV( 0x2735, 0x100b, 0x0000, 0x9999,
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_GO_SLOW ),
+/* Reported-by: Tim Anderson <tsa@biglakesoftware.com> */
+UNUSUAL_DEV( 0x2ca3, 0x0031, 0x0000, 0x9999,
+ "DJI",
+ "CineSSD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/*
* Reported by Frederic Marchal <frederic.marchal@wowcompany.com>
* Mio Moov 330
diff --git a/drivers/usb/typec/bus.c b/drivers/usb/typec/bus.c
index 95a2b10127db..76299b6ff06d 100644
--- a/drivers/usb/typec/bus.c
+++ b/drivers/usb/typec/bus.c
@@ -255,12 +255,13 @@ EXPORT_SYMBOL_GPL(typec_altmode_unregister_driver);
/* API for the port drivers */
/**
- * typec_match_altmode - Match SVID to an array of alternate modes
+ * typec_match_altmode - Match SVID and mode to an array of alternate modes
* @altmodes: Array of alternate modes
- * @n: Number of elements in the array, or -1 for NULL termiated arrays
+ * @n: Number of elements in the array, or -1 for NULL terminated arrays
* @svid: Standard or Vendor ID to match with
+ * @mode: Mode to match with
*
- * Return pointer to an alternate mode with SVID mathing @svid, or NULL when no
+ * Return pointer to an alternate mode with SVID matching @svid, or NULL when no
* match is found.
*/
struct typec_altmode *typec_match_altmode(struct typec_altmode **altmodes,
diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c
index c202975f8097..e61dffb27a0c 100644
--- a/drivers/usb/typec/class.c
+++ b/drivers/usb/typec/class.c
@@ -1484,7 +1484,6 @@ EXPORT_SYMBOL_GPL(typec_set_mode);
* typec_port_register_altmode - Register USB Type-C Port Alternate Mode
* @port: USB Type-C Port that supports the alternate mode
* @desc: Description of the alternate mode
- * @drvdata: Private pointer to driver specific info
*
* This routine is used to register an alternate mode that @port is capable of
* supporting.
generated by cgit (git 2.34.1) at 2025-06-06 21:00:28 +0000