diff options
Diffstat (limited to 'drivers')
27 files changed, 2337 insertions, 118 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 7fdcbd3f4da5..7d978c1bd528 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -1,3 +1,6 @@ +config CLKSRC_OF + bool + config CLKSRC_I8253 bool @@ -25,6 +28,9 @@ config ARMADA_370_XP_TIMER config SUNXI_TIMER bool +config VT8500_TIMER + bool + config CLKSRC_NOMADIK_MTU bool depends on (ARCH_NOMADIK || ARCH_U8500) diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile index f93453d01673..596c45c2f192 100644 --- a/drivers/clocksource/Makefile +++ b/drivers/clocksource/Makefile @@ -1,3 +1,4 @@ +obj-$(CONFIG_CLKSRC_OF) += clksrc-of.o obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o @@ -16,5 +17,7 @@ obj-$(CONFIG_CLKSRC_DBX500_PRCMU) += clksrc-dbx500-prcmu.o obj-$(CONFIG_ARMADA_370_XP_TIMER) += time-armada-370-xp.o obj-$(CONFIG_ARCH_BCM2835) += bcm2835_timer.o obj-$(CONFIG_SUNXI_TIMER) += sunxi_timer.o +obj-$(CONFIG_ARCH_TEGRA) += tegra20_timer.o +obj-$(CONFIG_VT8500_TIMER) += vt8500_timer.o obj-$(CONFIG_CLKSRC_ARM_GENERIC) += arm_generic.o diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c index bc19f12c20ce..50c68fef944b 100644 --- a/drivers/clocksource/bcm2835_timer.c +++ b/drivers/clocksource/bcm2835_timer.c @@ -16,7 +16,6 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/bcm2835_timer.h> #include <linux/bitops.h> #include <linux/clockchips.h> #include <linux/clocksource.h> @@ -101,7 +100,7 @@ static struct of_device_id bcm2835_time_match[] __initconst = { {} }; -static void __init bcm2835_time_init(void) +static void __init bcm2835_timer_init(void) { struct device_node *node; void __iomem *base; @@ -155,7 +154,5 @@ static void __init bcm2835_time_init(void) pr_info("bcm2835: system timer (irq = %d)\n", irq); } - -struct sys_timer bcm2835_timer = { - .init = bcm2835_time_init, -}; +CLOCKSOURCE_OF_DECLARE(bcm2835, "brcm,bcm2835-system-timer", + bcm2835_timer_init); diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c new file mode 100644 index 000000000000..bdabdaa8d00f --- /dev/null +++ b/drivers/clocksource/clksrc-of.c @@ -0,0 +1,35 @@ +/* + * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/init.h> +#include <linux/of.h> + +extern struct of_device_id __clksrc_of_table[]; + +static const struct of_device_id __clksrc_of_table_sentinel + __used __section(__clksrc_of_table_end); + +void __init clocksource_of_init(void) +{ + struct device_node *np; + const struct of_device_id *match; + void (*init_func)(void); + + for_each_matching_node_and_match(np, __clksrc_of_table, &match) { + init_func = match->data; + init_func(); + } +} diff --git a/drivers/clocksource/cs5535-clockevt.c b/drivers/clocksource/cs5535-clockevt.c index d9279385304d..ea210482dd20 100644 --- a/drivers/clocksource/cs5535-clockevt.c +++ b/drivers/clocksource/cs5535-clockevt.c @@ -100,7 +100,6 @@ static struct clock_event_device cs5535_clockevent = { .set_mode = mfgpt_set_mode, .set_next_event = mfgpt_next_event, .rating = 250, - .shift = 32 }; static irqreturn_t mfgpt_tick(int irq, void *dev_id) @@ -169,17 +168,11 @@ static int __init cs5535_mfgpt_init(void) cs5535_mfgpt_write(cs5535_event_clock, MFGPT_REG_SETUP, val); /* Set up the clock event */ - cs5535_clockevent.mult = div_sc(MFGPT_HZ, NSEC_PER_SEC, - cs5535_clockevent.shift); - cs5535_clockevent.min_delta_ns = clockevent_delta2ns(0xF, - &cs5535_clockevent); - cs5535_clockevent.max_delta_ns = clockevent_delta2ns(0xFFFE, - &cs5535_clockevent); - printk(KERN_INFO DRV_NAME ": Registering MFGPT timer as a clock event, using IRQ %d\n", timer_irq); - clockevents_register_device(&cs5535_clockevent); + clockevents_config_and_register(&cs5535_clockevent, MFGPT_HZ, + 0xF, 0xFFFE); return 0; diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index f7dba5b79b44..ab09ed3742ee 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -107,7 +107,7 @@ static const struct of_device_id osctimer_ids[] __initconst = { {}, }; -static void __init timer_init(void) +void __init dw_apb_timer_init(void) { struct device_node *event_timer, *source_timer; @@ -125,7 +125,3 @@ static void __init timer_init(void) init_sched_clock(); } - -struct sys_timer dw_apb_timer = { - .init = timer_init, -}; diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index 8914c3c1c88b..025afc6dd324 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -134,12 +134,32 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, } } +void nmdk_clksrc_reset(void) +{ + /* Disable */ + writel(0, mtu_base + MTU_CR(0)); + + /* ClockSource: configure load and background-load, and fire it up */ + writel(nmdk_cycle, mtu_base + MTU_LR(0)); + writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); + + writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, + mtu_base + MTU_CR(0)); +} + +static void nmdk_clkevt_resume(struct clock_event_device *cedev) +{ + nmdk_clkevt_reset(); + nmdk_clksrc_reset(); +} + static struct clock_event_device nmdk_clkevt = { .name = "mtu_1", .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, .rating = 200, .set_mode = nmdk_clkevt_mode, .set_next_event = nmdk_clkevt_next, + .resume = nmdk_clkevt_resume, }; /* @@ -161,19 +181,6 @@ static struct irqaction nmdk_timer_irq = { .dev_id = &nmdk_clkevt, }; -void nmdk_clksrc_reset(void) -{ - /* Disable */ - writel(0, mtu_base + MTU_CR(0)); - - /* ClockSource: configure load and background-load, and fire it up */ - writel(nmdk_cycle, mtu_base + MTU_LR(0)); - writel(nmdk_cycle, mtu_base + MTU_BGLR(0)); - - writel(clk_prescale | MTU_CRn_32BITS | MTU_CRn_ENA, - mtu_base + MTU_CR(0)); -} - void __init nmdk_timer_init(void __iomem *base, int irq) { unsigned long rate; diff --git a/drivers/clocksource/sunxi_timer.c b/drivers/clocksource/sunxi_timer.c index 93d09d0e009f..4086b9167159 100644 --- a/drivers/clocksource/sunxi_timer.c +++ b/drivers/clocksource/sunxi_timer.c @@ -74,7 +74,6 @@ static int sunxi_clkevt_next_event(unsigned long evt, static struct clock_event_device sunxi_clockevent = { .name = "sunxi_tick", - .shift = 32, .rating = 300, .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .set_mode = sunxi_clkevt_mode, @@ -104,7 +103,7 @@ static struct of_device_id sunxi_timer_dt_ids[] = { { } }; -static void __init sunxi_timer_init(void) +void __init sunxi_timer_init(void) { struct device_node *node; unsigned long rate = 0; @@ -154,18 +153,8 @@ static void __init sunxi_timer_init(void) val = readl(timer_base + TIMER_CTL_REG); writel(val | TIMER_CTL_ENABLE, timer_base + TIMER_CTL_REG); - sunxi_clockevent.mult = div_sc(rate / TIMER_SCAL, - NSEC_PER_SEC, - sunxi_clockevent.shift); - sunxi_clockevent.max_delta_ns = clockevent_delta2ns(0xff, - &sunxi_clockevent); - sunxi_clockevent.min_delta_ns = clockevent_delta2ns(0x1, - &sunxi_clockevent); sunxi_clockevent.cpumask = cpumask_of(0); - clockevents_register_device(&sunxi_clockevent); + clockevents_config_and_register(&sunxi_clockevent, rate / TIMER_SCAL, + 0x1, 0xff); } - -struct sys_timer sunxi_timer = { - .init = sunxi_timer_init, -}; diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index 32cb929b8eb6..8a6187225dd0 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -157,7 +157,6 @@ static struct tc_clkevt_device clkevt = { .name = "tc_clkevt", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, /* Should be lower than at91rm9200's system timer */ .rating = 125, .set_next_event = tc_next_event, @@ -196,13 +195,9 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) timer_clock = clk32k_divisor_idx; - clkevt.clkevt.mult = div_sc(32768, NSEC_PER_SEC, clkevt.clkevt.shift); - clkevt.clkevt.max_delta_ns - = clockevent_delta2ns(0xffff, &clkevt.clkevt); - clkevt.clkevt.min_delta_ns = clockevent_delta2ns(1, &clkevt.clkevt) + 1; clkevt.clkevt.cpumask = cpumask_of(0); - clockevents_register_device(&clkevt.clkevt); + clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff); setup_irq(irq, &tc_irqaction); } diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c new file mode 100644 index 000000000000..0bde03feb095 --- /dev/null +++ b/drivers/clocksource/tegra20_timer.c @@ -0,0 +1,281 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Colin Cross <ccross@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/init.h> +#include <linux/err.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#include <asm/mach/time.h> +#include <asm/smp_twd.h> +#include <asm/sched_clock.h> + +#define RTC_SECONDS 0x08 +#define RTC_SHADOW_SECONDS 0x0c +#define RTC_MILLISECONDS 0x10 + +#define TIMERUS_CNTR_1US 0x10 +#define TIMERUS_USEC_CFG 0x14 +#define TIMERUS_CNTR_FREEZE 0x4c + +#define TIMER1_BASE 0x0 +#define TIMER2_BASE 0x8 +#define TIMER3_BASE 0x50 +#define TIMER4_BASE 0x58 + +#define TIMER_PTV 0x0 +#define TIMER_PCR 0x4 + +static void __iomem *timer_reg_base; +static void __iomem *rtc_base; + +static struct timespec persistent_ts; +static u64 persistent_ms, last_persistent_ms; + +#define timer_writel(value, reg) \ + __raw_writel(value, timer_reg_base + (reg)) +#define timer_readl(reg) \ + __raw_readl(timer_reg_base + (reg)) + +static int tegra_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + u32 reg; + + reg = 0x80000000 | ((cycles > 1) ? (cycles-1) : 0); + timer_writel(reg, TIMER3_BASE + TIMER_PTV); + + return 0; +} + +static void tegra_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + u32 reg; + + timer_writel(0, TIMER3_BASE + TIMER_PTV); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + reg = 0xC0000000 | ((1000000/HZ)-1); + timer_writel(reg, TIMER3_BASE + TIMER_PTV); + break; + case CLOCK_EVT_MODE_ONESHOT: + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device tegra_clockevent = { + .name = "timer0", + .rating = 300, + .features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_PERIODIC, + .set_next_event = tegra_timer_set_next_event, + .set_mode = tegra_timer_set_mode, +}; + +static u32 notrace tegra_read_sched_clock(void) +{ + return timer_readl(TIMERUS_CNTR_1US); +} + +/* + * tegra_rtc_read - Reads the Tegra RTC registers + * Care must be taken that this funciton is not called while the + * tegra_rtc driver could be executing to avoid race conditions + * on the RTC shadow register + */ +static u64 tegra_rtc_read_ms(void) +{ + u32 ms = readl(rtc_base + RTC_MILLISECONDS); + u32 s = readl(rtc_base + RTC_SHADOW_SECONDS); + return (u64)s * MSEC_PER_SEC + ms; +} + +/* + * tegra_read_persistent_clock - Return time from a persistent clock. + * + * Reads the time from a source which isn't disabled during PM, the + * 32k sync timer. Convert the cycles elapsed since last read into + * nsecs and adds to a monotonically increasing timespec. + * Care must be taken that this funciton is not called while the + * tegra_rtc driver could be executing to avoid race conditions + * on the RTC shadow register + */ +static void tegra_read_persistent_clock(struct timespec *ts) +{ + u64 delta; + struct timespec *tsp = &persistent_ts; + + last_persistent_ms = persistent_ms; + persistent_ms = tegra_rtc_read_ms(); + delta = persistent_ms - last_persistent_ms; + + timespec_add_ns(tsp, delta * NSEC_PER_MSEC); + *ts = *tsp; +} + +static irqreturn_t tegra_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + timer_writel(1<<30, TIMER3_BASE + TIMER_PCR); + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction tegra_timer_irq = { + .name = "timer0", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_TRIGGER_HIGH, + .handler = tegra_timer_interrupt, + .dev_id = &tegra_clockevent, +}; + +static const struct of_device_id timer_match[] __initconst = { + { .compatible = "nvidia,tegra20-timer" }, + {} +}; + +static const struct of_device_id rtc_match[] __initconst = { + { .compatible = "nvidia,tegra20-rtc" }, + {} +}; + +static void __init tegra20_init_timer(void) +{ + struct device_node *np; + struct clk *clk; + unsigned long rate; + int ret; + + np = of_find_matching_node(NULL, timer_match); + if (!np) { + pr_err("Failed to find timer DT node\n"); + BUG(); + } + + timer_reg_base = of_iomap(np, 0); + if (!timer_reg_base) { + pr_err("Can't map timer registers\n"); + BUG(); + } + + tegra_timer_irq.irq = irq_of_parse_and_map(np, 2); + if (tegra_timer_irq.irq <= 0) { + pr_err("Failed to map timer IRQ\n"); + BUG(); + } + + clk = clk_get_sys("timer", NULL); + if (IS_ERR(clk)) { + pr_warn("Unable to get timer clock. Assuming 12Mhz input clock.\n"); + rate = 12000000; + } else { + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + } + + of_node_put(np); + + np = of_find_matching_node(NULL, rtc_match); + if (!np) { + pr_err("Failed to find RTC DT node\n"); + BUG(); + } + + rtc_base = of_iomap(np, 0); + if (!rtc_base) { + pr_err("Can't map RTC registers"); + BUG(); + } + + /* + * rtc registers are used by read_persistent_clock, keep the rtc clock + * enabled + */ + clk = clk_get_sys("rtc-tegra", NULL); + if (IS_ERR(clk)) + pr_warn("Unable to get rtc-tegra clock\n"); + else + clk_prepare_enable(clk); + + of_node_put(np); + + switch (rate) { + case 12000000: + timer_writel(0x000b, TIMERUS_USEC_CFG); + break; + case 13000000: + timer_writel(0x000c, TIMERUS_USEC_CFG); + break; + case 19200000: + timer_writel(0x045f, TIMERUS_USEC_CFG); + break; + case 26000000: + timer_writel(0x0019, TIMERUS_USEC_CFG); + break; + default: + WARN(1, "Unknown clock rate"); + } + + setup_sched_clock(tegra_read_sched_clock, 32, 1000000); + + if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US, + "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) { + pr_err("Failed to register clocksource\n"); + BUG(); + } + + ret = setup_irq(tegra_timer_irq.irq, &tegra_timer_irq); + if (ret) { + pr_err("Failed to register timer IRQ: %d\n", ret); + BUG(); + } + + tegra_clockevent.cpumask = cpu_all_mask; + tegra_clockevent.irq = tegra_timer_irq.irq; + clockevents_config_and_register(&tegra_clockevent, 1000000, + 0x1, 0x1fffffff); +#ifdef CONFIG_HAVE_ARM_TWD + twd_local_timer_of_register(); +#endif + register_persistent_clock(NULL, tegra_read_persistent_clock); +} +CLOCKSOURCE_OF_DECLARE(tegra20, "nvidia,tegra20-timer", tegra20_init_timer); + +#ifdef CONFIG_PM +static u32 usec_config; + +void tegra_timer_suspend(void) +{ + usec_config = timer_readl(TIMERUS_USEC_CFG); +} + +void tegra_timer_resume(void) +{ + timer_writel(usec_config, TIMERUS_USEC_CFG); +} +#endif diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c new file mode 100644 index 000000000000..8efc86b5b5dd --- /dev/null +++ b/drivers/clocksource/vt8500_timer.c @@ -0,0 +1,180 @@ +/* + * arch/arm/mach-vt8500/timer.c + * + * Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz> + * Copyright (C) 2010 Alexey Charkov <alchark@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +/* + * This file is copied and modified from the original timer.c provided by + * Alexey Charkov. Minor changes have been made for Device Tree Support. + */ + +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/interrupt.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/delay.h> +#include <asm/mach/time.h> + +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> + +#define VT8500_TIMER_OFFSET 0x0100 +#define VT8500_TIMER_HZ 3000000 +#define TIMER_MATCH_VAL 0x0000 +#define TIMER_COUNT_VAL 0x0010 +#define TIMER_STATUS_VAL 0x0014 +#define TIMER_IER_VAL 0x001c /* interrupt enable */ +#define TIMER_CTRL_VAL 0x0020 +#define TIMER_AS_VAL 0x0024 /* access status */ +#define TIMER_COUNT_R_ACTIVE (1 << 5) /* not ready for read */ +#define TIMER_COUNT_W_ACTIVE (1 << 4) /* not ready for write */ +#define TIMER_MATCH_W_ACTIVE (1 << 0) /* not ready for write */ + +#define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t) + +static void __iomem *regbase; + +static cycle_t vt8500_timer_read(struct clocksource *cs) +{ + int loops = msecs_to_loops(10); + writel(3, regbase + TIMER_CTRL_VAL); + while ((readl((regbase + TIMER_AS_VAL)) & TIMER_COUNT_R_ACTIVE) + && --loops) + cpu_relax(); + return readl(regbase + TIMER_COUNT_VAL); +} + +static struct clocksource clocksource = { + .name = "vt8500_timer", + .rating = 200, + .read = vt8500_timer_read, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int vt8500_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + int loops = msecs_to_loops(10); + cycle_t alarm = clocksource.read(&clocksource) + cycles; + while ((readl(regbase + TIMER_AS_VAL) & TIMER_MATCH_W_ACTIVE) + && --loops) + cpu_relax(); + writel((unsigned long)alarm, regbase + TIMER_MATCH_VAL); + + if ((signed)(alarm - clocksource.read(&clocksource)) <= 16) + return -ETIME; + + writel(1, regbase + TIMER_IER_VAL); + + return 0; +} + +static void vt8500_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_RESUME: + case CLOCK_EVT_MODE_PERIODIC: + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + writel(readl(regbase + TIMER_CTRL_VAL) | 1, + regbase + TIMER_CTRL_VAL); + writel(0, regbase + TIMER_IER_VAL); + break; + } +} + +static struct clock_event_device clockevent = { + .name = "vt8500_timer", + .features = CLOCK_EVT_FEAT_ONESHOT, + .rating = 200, + .set_next_event = vt8500_timer_set_next_event, + .set_mode = vt8500_timer_set_mode, +}; + +static irqreturn_t vt8500_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + writel(0xf, regbase + TIMER_STATUS_VAL); + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction irq = { + .name = "vt8500_timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = vt8500_timer_interrupt, + .dev_id = &clockevent, +}; + +static struct of_device_id vt8500_timer_ids[] = { + { .compatible = "via,vt8500-timer" }, + { } +}; + +static void __init vt8500_timer_init(void) +{ + struct device_node *np; + int timer_irq; + + np = of_find_matching_node(NULL, vt8500_timer_ids); + if (!np) { + pr_err("%s: Timer description missing from Device Tree\n", + __func__); + return; + } + regbase = of_iomap(np, 0); + if (!regbase) { + pr_err("%s: Missing iobase description in Device Tree\n", + __func__); + of_node_put(np); + return; + } + timer_irq = irq_of_parse_and_map(np, 0); + if (!timer_irq) { + pr_err("%s: Missing irq description in Device Tree\n", + __func__); + of_node_put(np); + return; + } + + writel(1, regbase + TIMER_CTRL_VAL); + writel(0xf, regbase + TIMER_STATUS_VAL); + writel(~0, regbase + TIMER_MATCH_VAL); + + if (clocksource_register_hz(&clocksource, VT8500_TIMER_HZ)) + pr_err("%s: vt8500_timer_init: clocksource_register failed for %s\n", + __func__, clocksource.name); + + clockevent.cpumask = cpumask_of(0); + + if (setup_irq(timer_irq, &irq)) + pr_err("%s: setup_irq failed for %s\n", __func__, + clockevent.name); + clockevents_config_and_register(&clockevent, VT8500_TIMER_HZ, + 4, 0xf0000000); +} + +CLOCKSOURCE_OF_DECLARE(vt8500, "via,vt8500-timer", vt8500_timer_init) diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c index 79a84860ea56..48a1988149d8 100644 --- a/drivers/cpufreq/db8500-cpufreq.c +++ b/drivers/cpufreq/db8500-cpufreq.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/clk.h> -#include <mach/id.h> static struct cpufreq_frequency_table *freq_table; static struct clk *armss_clk; @@ -165,9 +164,6 @@ static struct platform_driver db8500_cpufreq_plat_driver = { static int __init db8500_cpufreq_register(void) { - if (!cpu_is_u8500_family()) - return -ENODEV; - pr_info("cpufreq for DB8500 started\n"); return platform_driver_register(&db8500_cpufreq_plat_driver); } diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c index 69b676dd3358..78057a357ddb 100644 --- a/drivers/cpufreq/exynos-cpufreq.c +++ b/drivers/cpufreq/exynos-cpufreq.c @@ -18,10 +18,10 @@ #include <linux/cpufreq.h> #include <linux/suspend.h> -#include <mach/cpufreq.h> - #include <plat/cpu.h> +#include "exynos-cpufreq.h" + static struct exynos_dvfs_info *exynos_info; static struct regulator *arm_regulator; diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h new file mode 100644 index 000000000000..92b852ee5ddc --- /dev/null +++ b/drivers/cpufreq/exynos-cpufreq.h @@ -0,0 +1,48 @@ +/* + * Copyright (c) 2010 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * EXYNOS - CPUFreq support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +enum cpufreq_level_index { + L0, L1, L2, L3, L4, + L5, L6, L7, L8, L9, + L10, L11, L12, L13, L14, + L15, L16, L17, L18, L19, + L20, +}; + +#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \ + { \ + .freq = (f) * 1000, \ + .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \ + (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \ + .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \ + .mps = ((m) << 16 | (p) << 8 | (s)), \ + } + +struct apll_freq { + unsigned int freq; + u32 clk_div_cpu0; + u32 clk_div_cpu1; + u32 mps; +}; + +struct exynos_dvfs_info { + unsigned long mpll_freq_khz; + unsigned int pll_safe_idx; + struct clk *cpu_clk; + unsigned int *volt_table; + struct cpufreq_frequency_table *freq_table; + void (*set_freq)(unsigned int, unsigned int); + bool (*need_apll_change)(unsigned int, unsigned int); +}; + +extern int exynos4210_cpufreq_init(struct exynos_dvfs_info *); +extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *); +extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *); diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c index de91755e2556..add7fbec4fc9 100644 --- a/drivers/cpufreq/exynos4210-cpufreq.c +++ b/drivers/cpufreq/exynos4210-cpufreq.c @@ -18,7 +18,8 @@ #include <linux/cpufreq.h> #include <mach/regs-clock.h> -#include <mach/cpufreq.h> + +#include "exynos-cpufreq.h" static struct clk *cpu_clk; static struct clk *moutcore; diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c index 0661039e5d4a..08b7477b0aa2 100644 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ b/drivers/cpufreq/exynos4x12-cpufreq.c @@ -18,7 +18,8 @@ #include <linux/cpufreq.h> #include <mach/regs-clock.h> -#include <mach/cpufreq.h> + +#include "exynos-cpufreq.h" static struct clk *cpu_clk; static struct clk *moutcore; diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c index b9344869f822..9fae466d7746 100644 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ b/drivers/cpufreq/exynos5250-cpufreq.c @@ -19,7 +19,8 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/cpufreq.h> + +#include "exynos-cpufreq.h" static struct clk *cpu_clk; static struct clk *moutcore; diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c index b2016ed941ac..b3643ff007e4 100644 --- a/drivers/gpio/gpio-samsung.c +++ b/drivers/gpio/gpio-samsung.c @@ -38,7 +38,6 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> #include <plat/gpio-cfg-helpers.h> -#include <plat/gpio-fns.h> #include <plat/pm.h> int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig index 62ca575701d3..a350969e5efe 100644 --- a/drivers/irqchip/Kconfig +++ b/drivers/irqchip/Kconfig @@ -1,3 +1,30 @@ +config IRQCHIP + def_bool y + depends on OF_IRQ + +config ARM_GIC + bool + select IRQ_DOMAIN + select MULTI_IRQ_HANDLER + +config GIC_NON_BANKED + bool + +config ARM_VIC + bool + select IRQ_DOMAIN + select MULTI_IRQ_HANDLER + +config ARM_VIC_NR + int + default 4 if ARCH_S5PV210 + default 3 if ARCH_S5PC100 + default 2 + depends on ARM_VIC + help + The maximum number of VICs available in the system, for + power management. + config VERSATILE_FPGA_IRQ bool select IRQ_DOMAIN diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile index bf4609a5bd9d..e65fbf2cdf71 100644 --- a/drivers/irqchip/Makefile +++ b/drivers/irqchip/Makefile @@ -1,4 +1,9 @@ +obj-$(CONFIG_IRQCHIP) += irqchip.o + obj-$(CONFIG_ARCH_BCM2835) += irq-bcm2835.o +obj-$(CONFIG_ARCH_EXYNOS) += exynos-combiner.o obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o -obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o +obj-$(CONFIG_ARM_GIC) += irq-gic.o +obj-$(CONFIG_ARM_VIC) += irq-vic.o +obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o diff --git a/drivers/irqchip/exynos-combiner.c b/drivers/irqchip/exynos-combiner.c new file mode 100644 index 000000000000..04d86a9803f4 --- /dev/null +++ b/drivers/irqchip/exynos-combiner.c @@ -0,0 +1,230 @@ +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Combiner irqchip for EXYNOS + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/err.h> +#include <linux/export.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <asm/mach/irq.h> + +#include <plat/cpu.h> + +#include "irqchip.h" + +#define COMBINER_ENABLE_SET 0x0 +#define COMBINER_ENABLE_CLEAR 0x4 +#define COMBINER_INT_STATUS 0xC + +static DEFINE_SPINLOCK(irq_controller_lock); + +struct combiner_chip_data { + unsigned int irq_offset; + unsigned int irq_mask; + void __iomem *base; +}; + +static struct irq_domain *combiner_irq_domain; +static struct combiner_chip_data combiner_data[MAX_COMBINER_NR]; + +static inline void __iomem *combiner_base(struct irq_data *data) +{ + struct combiner_chip_data *combiner_data = + irq_data_get_irq_chip_data(data); + + return combiner_data->base; +} + +static void combiner_mask_irq(struct irq_data *data) +{ + u32 mask = 1 << (data->hwirq % 32); + + __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_CLEAR); +} + +static void combiner_unmask_irq(struct irq_data *data) +{ + u32 mask = 1 << (data->hwirq % 32); + + __raw_writel(mask, combiner_base(data) + COMBINER_ENABLE_SET); +} + +static void combiner_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) +{ + struct combiner_chip_data *chip_data = irq_get_handler_data(irq); + struct irq_chip *chip = irq_get_chip(irq); + unsigned int cascade_irq, combiner_irq; + unsigned long status; + + chained_irq_enter(chip, desc); + + spin_lock(&irq_controller_lock); + status = __raw_readl(chip_data->base + COMBINER_INT_STATUS); + spin_unlock(&irq_controller_lock); + status &= chip_data->irq_mask; + + if (status == 0) + goto out; + + combiner_irq = __ffs(status); + + cascade_irq = combiner_irq + (chip_data->irq_offset & ~31); + if (unlikely(cascade_irq >= NR_IRQS)) + do_bad_IRQ(cascade_irq, desc); + else + generic_handle_irq(cascade_irq); + + out: + chained_irq_exit(chip, desc); +} + +static struct irq_chip combiner_chip = { + .name = "COMBINER", + .irq_mask = combiner_mask_irq, + .irq_unmask = combiner_unmask_irq, +}; + +static void __init combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq) +{ + unsigned int max_nr; + + if (soc_is_exynos5250()) + max_nr = EXYNOS5_MAX_COMBINER_NR; + else + max_nr = EXYNOS4_MAX_COMBINER_NR; + + if (combiner_nr >= max_nr) + BUG(); + if (irq_set_handler_data(irq, &combiner_data[combiner_nr]) != 0) + BUG(); + irq_set_chained_handler(irq, combiner_handle_cascade_irq); +} + +static void __init combiner_init_one(unsigned int combiner_nr, + void __iomem *base) +{ + combiner_data[combiner_nr].base = base; + combiner_data[combiner_nr].irq_offset = irq_find_mapping( + combiner_irq_domain, combiner_nr * MAX_IRQ_IN_COMBINER); + combiner_data[combiner_nr].irq_mask = 0xff << ((combiner_nr % 4) << 3); + + /* Disable all interrupts */ + __raw_writel(combiner_data[combiner_nr].irq_mask, + base + COMBINER_ENABLE_CLEAR); +} + +#ifdef CONFIG_OF +static int combiner_irq_domain_xlate(struct irq_domain *d, + struct device_node *controller, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + if (d->of_node != controller) + return -EINVAL; + + if (intsize < 2) + return -EINVAL; + + *out_hwirq = intspec[0] * MAX_IRQ_IN_COMBINER + intspec[1]; + *out_type = 0; + + return 0; +} +#else +static int combiner_irq_domain_xlate(struct irq_domain *d, + struct device_node *controller, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, + unsigned int *out_type) +{ + return -EINVAL; +} +#endif + +static int combiner_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + irq_set_chip_and_handler(irq, &combiner_chip, handle_level_irq); + irq_set_chip_data(irq, &combiner_data[hw >> 3]); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static struct irq_domain_ops combiner_irq_domain_ops = { + .xlate = combiner_irq_domain_xlate, + .map = combiner_irq_domain_map, +}; + +void __init combiner_init(void __iomem *combiner_base, + struct device_node *np) +{ + int i, irq, irq_base; + unsigned int max_nr, nr_irq; + + if (np) { + if (of_property_read_u32(np, "samsung,combiner-nr", &max_nr)) { + pr_warning("%s: number of combiners not specified, " + "setting default as %d.\n", + __func__, EXYNOS4_MAX_COMBINER_NR); + max_nr = EXYNOS4_MAX_COMBINER_NR; + } + } else { + max_nr = soc_is_exynos5250() ? EXYNOS5_MAX_COMBINER_NR : + EXYNOS4_MAX_COMBINER_NR; + } + nr_irq = max_nr * MAX_IRQ_IN_COMBINER; + + irq_base = irq_alloc_descs(COMBINER_IRQ(0, 0), 1, nr_irq, 0); + if (IS_ERR_VALUE(irq_base)) { + irq_base = COMBINER_IRQ(0, 0); + pr_warning("%s: irq desc alloc failed. Continuing with %d as linux irq base\n", __func__, irq_base); + } + + combiner_irq_domain = irq_domain_add_legacy(np, nr_irq, irq_base, 0, + &combiner_irq_domain_ops, &combiner_data); + if (WARN_ON(!combiner_irq_domain)) { + pr_warning("%s: irq domain init failed\n", __func__); + return; + } + + for (i = 0; i < max_nr; i++) { + combiner_init_one(i, combiner_base + (i >> 2) * 0x10); + irq = IRQ_SPI(i); +#ifdef CONFIG_OF + if (np) + irq = irq_of_parse_and_map(np, i); +#endif + combiner_cascade_irq(i, irq); + } +} + +#ifdef CONFIG_OF +static int __init combiner_of_init(struct device_node *np, + struct device_node *parent) +{ + void __iomem *combiner_base; + + combiner_base = of_iomap(np, 0); + if (!combiner_base) { + pr_err("%s: failed to map combiner registers\n", __func__); + return -ENXIO; + } + + combiner_init(combiner_base, np); + + return 0; +} +IRQCHIP_DECLARE(exynos4210_combiner, "samsung,exynos4210-combiner", + combiner_of_init); +#endif diff --git a/drivers/irqchip/irq-gic.c b/drivers/irqchip/irq-gic.c new file mode 100644 index 000000000000..644d72468423 --- /dev/null +++ b/drivers/irqchip/irq-gic.c @@ -0,0 +1,845 @@ +/* + * linux/arch/arm/common/gic.c + * + * Copyright (C) 2002 ARM Limited, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Interrupt architecture for the GIC: + * + * o There is one Interrupt Distributor, which receives interrupts + * from system devices and sends them to the Interrupt Controllers. + * + * o There is one CPU Interface per CPU, which sends interrupts sent + * by the Distributor, and interrupts generated locally, to the + * associated CPU. The base address of the CPU interface is usually + * aliased so that the same address points to different chips depending + * on the CPU it is accessed from. + * + * Note that IRQs 0-31 are special - they are local to each CPU. + * As such, the enable set/clear, pending set/clear and active bit + * registers are banked per-cpu for these sources. + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/smp.h> +#include <linux/cpu_pm.h> +#include <linux/cpumask.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> +#include <linux/percpu.h> +#include <linux/slab.h> +#include <linux/irqchip/arm-gic.h> + +#include <asm/irq.h> +#include <asm/exception.h> +#include <asm/smp_plat.h> +#include <asm/mach/irq.h> + +#include "irqchip.h" + +union gic_base { + void __iomem *common_base; + void __percpu __iomem **percpu_base; +}; + +struct gic_chip_data { + union gic_base dist_base; + union gic_base cpu_base; +#ifdef CONFIG_CPU_PM + u32 saved_spi_enable[DIV_ROUND_UP(1020, 32)]; + u32 saved_spi_conf[DIV_ROUND_UP(1020, 16)]; + u32 saved_spi_target[DIV_ROUND_UP(1020, 4)]; + u32 __percpu *saved_ppi_enable; + u32 __percpu *saved_ppi_conf; +#endif + struct irq_domain *domain; + unsigned int gic_irqs; +#ifdef CONFIG_GIC_NON_BANKED + void __iomem *(*get_base)(union gic_base *); +#endif +}; + +static DEFINE_RAW_SPINLOCK(irq_controller_lock); + +/* + * The GIC mapping of CPU interfaces does not necessarily match + * the logical CPU numbering. Let's use a mapping as returned + * by the GIC itself. + */ +#define NR_GIC_CPU_IF 8 +static u8 gic_cpu_map[NR_GIC_CPU_IF] __read_mostly; + +/* + * Supported arch specific GIC irq extension. + * Default make them NULL. + */ +struct irq_chip gic_arch_extn = { + .irq_eoi = NULL, + .irq_mask = NULL, + .irq_unmask = NULL, + .irq_retrigger = NULL, + .irq_set_type = NULL, + .irq_set_wake = NULL, +}; + +#ifndef MAX_GIC_NR +#define MAX_GIC_NR 1 +#endif + +static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly; + +#ifdef CONFIG_GIC_NON_BANKED +static void __iomem *gic_get_percpu_base(union gic_base *base) +{ + return *__this_cpu_ptr(base->percpu_base); +} + +static void __iomem *gic_get_common_base(union gic_base *base) +{ + return base->common_base; +} + +static inline void __iomem *gic_data_dist_base(struct gic_chip_data *data) +{ + return data->get_base(&data->dist_base); +} + +static inline void __iomem *gic_data_cpu_base(struct gic_chip_data *data) +{ + return data->get_base(&data->cpu_base); +} + +static inline void gic_set_base_accessor(struct gic_chip_data *data, + void __iomem *(*f)(union gic_base *)) +{ + data->get_base = f; +} +#else +#define gic_data_dist_base(d) ((d)->dist_base.common_base) +#define gic_data_cpu_base(d) ((d)->cpu_base.common_base) +#define gic_set_base_accessor(d,f) +#endif + +static inline void __iomem *gic_dist_base(struct irq_data *d) +{ + struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); + return gic_data_dist_base(gic_data); +} + +static inline void __iomem *gic_cpu_base(struct irq_data *d) +{ + struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); + return gic_data_cpu_base(gic_data); +} + +static inline unsigned int gic_irq(struct irq_data *d) +{ + return d->hwirq; +} + +/* + * Routines to acknowledge, disable and enable interrupts + */ +static void gic_mask_irq(struct irq_data *d) +{ + u32 mask = 1 << (gic_irq(d) % 32); + + raw_spin_lock(&irq_controller_lock); + writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_CLEAR + (gic_irq(d) / 32) * 4); + if (gic_arch_extn.irq_mask) + gic_arch_extn.irq_mask(d); + raw_spin_unlock(&irq_controller_lock); +} + +static void gic_unmask_irq(struct irq_data *d) +{ + u32 mask = 1 << (gic_irq(d) % 32); + + raw_spin_lock(&irq_controller_lock); + if (gic_arch_extn.irq_unmask) + gic_arch_extn.irq_unmask(d); + writel_relaxed(mask, gic_dist_base(d) + GIC_DIST_ENABLE_SET + (gic_irq(d) / 32) * 4); + raw_spin_unlock(&irq_controller_lock); +} + +static void gic_eoi_irq(struct irq_data *d) +{ + if (gic_arch_extn.irq_eoi) { + raw_spin_lock(&irq_controller_lock); + gic_arch_extn.irq_eoi(d); + raw_spin_unlock(&irq_controller_lock); + } + + writel_relaxed(gic_irq(d), gic_cpu_base(d) + GIC_CPU_EOI); +} + +static int gic_set_type(struct irq_data *d, unsigned int type) +{ + void __iomem *base = gic_dist_base(d); + unsigned int gicirq = gic_irq(d); + u32 enablemask = 1 << (gicirq % 32); + u32 enableoff = (gicirq / 32) * 4; + u32 confmask = 0x2 << ((gicirq % 16) * 2); + u32 confoff = (gicirq / 16) * 4; + bool enabled = false; + u32 val; + + /* Interrupt configuration for SGIs can't be changed */ + if (gicirq < 16) + return -EINVAL; + + if (type != IRQ_TYPE_LEVEL_HIGH && type != IRQ_TYPE_EDGE_RISING) + return -EINVAL; + + raw_spin_lock(&irq_controller_lock); + + if (gic_arch_extn.irq_set_type) + gic_arch_extn.irq_set_type(d, type); + + val = readl_relaxed(base + GIC_DIST_CONFIG + confoff); + if (type == IRQ_TYPE_LEVEL_HIGH) + val &= ~confmask; + else if (type == IRQ_TYPE_EDGE_RISING) + val |= confmask; + + /* + * As recommended by the spec, disable the interrupt before changing + * the configuration + */ + if (readl_relaxed(base + GIC_DIST_ENABLE_SET + enableoff) & enablemask) { + writel_relaxed(enablemask, base + GIC_DIST_ENABLE_CLEAR + enableoff); + enabled = true; + } + + writel_relaxed(val, base + GIC_DIST_CONFIG + confoff); + + if (enabled) + writel_relaxed(enablemask, base + GIC_DIST_ENABLE_SET + enableoff); + + raw_spin_unlock(&irq_controller_lock); + + return 0; +} + +static int gic_retrigger(struct irq_data *d) +{ + if (gic_arch_extn.irq_retrigger) + return gic_arch_extn.irq_retrigger(d); + + return -ENXIO; +} + +#ifdef CONFIG_SMP +static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, + bool force) +{ + void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); + unsigned int shift = (gic_irq(d) % 4) * 8; + unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); + u32 val, mask, bit; + + if (cpu >= NR_GIC_CPU_IF || cpu >= nr_cpu_ids) + return -EINVAL; + + mask = 0xff << shift; + bit = gic_cpu_map[cpu] << shift; + + raw_spin_lock(&irq_controller_lock); + val = readl_relaxed(reg) & ~mask; + writel_relaxed(val | bit, reg); + raw_spin_unlock(&irq_controller_lock); + + return IRQ_SET_MASK_OK; +} +#endif + +#ifdef CONFIG_PM +static int gic_set_wake(struct irq_data *d, unsigned int on) +{ + int ret = -ENXIO; + + if (gic_arch_extn.irq_set_wake) + ret = gic_arch_extn.irq_set_wake(d, on); + + return ret; +} + +#else +#define gic_set_wake NULL +#endif + +static asmlinkage void __exception_irq_entry gic_handle_irq(struct pt_regs *regs) +{ + u32 irqstat, irqnr; + struct gic_chip_data *gic = &gic_data[0]; + void __iomem *cpu_base = gic_data_cpu_base(gic); + + do { + irqstat = readl_relaxed(cpu_base + GIC_CPU_INTACK); + irqnr = irqstat & ~0x1c00; + + if (likely(irqnr > 15 && irqnr < 1021)) { + irqnr = irq_find_mapping(gic->domain, irqnr); + handle_IRQ(irqnr, regs); + continue; + } + if (irqnr < 16) { + writel_relaxed(irqstat, cpu_base + GIC_CPU_EOI); +#ifdef CONFIG_SMP + handle_IPI(irqnr, regs); +#endif + continue; + } + break; + } while (1); +} + +static void gic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) +{ + struct gic_chip_data *chip_data = irq_get_handler_data(irq); + struct irq_chip *chip = irq_get_chip(irq); + unsigned int cascade_irq, gic_irq; + unsigned long status; + + chained_irq_enter(chip, desc); + + raw_spin_lock(&irq_controller_lock); + status = readl_relaxed(gic_data_cpu_base(chip_data) + GIC_CPU_INTACK); + raw_spin_unlock(&irq_controller_lock); + + gic_irq = (status & 0x3ff); + if (gic_irq == 1023) + goto out; + + cascade_irq = irq_find_mapping(chip_data->domain, gic_irq); + if (unlikely(gic_irq < 32 || gic_irq > 1020)) + do_bad_IRQ(cascade_irq, desc); + else + generic_handle_irq(cascade_irq); + + out: + chained_irq_exit(chip, desc); +} + +static struct irq_chip gic_chip = { + .name = "GIC", + .irq_mask = gic_mask_irq, + .irq_unmask = gic_unmask_irq, + .irq_eoi = gic_eoi_irq, + .irq_set_type = gic_set_type, + .irq_retrigger = gic_retrigger, +#ifdef CONFIG_SMP + .irq_set_affinity = gic_set_affinity, +#endif + .irq_set_wake = gic_set_wake, +}; + +void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq) +{ + if (gic_nr >= MAX_GIC_NR) + BUG(); + if (irq_set_handler_data(irq, &gic_data[gic_nr]) != 0) + BUG(); + irq_set_chained_handler(irq, gic_handle_cascade_irq); +} + +static u8 gic_get_cpumask(struct gic_chip_data *gic) +{ + void __iomem *base = gic_data_dist_base(gic); + u32 mask, i; + + for (i = mask = 0; i < 32; i += 4) { + mask = readl_relaxed(base + GIC_DIST_TARGET + i); + mask |= mask >> 16; + mask |= mask >> 8; + if (mask) + break; + } + + if (!mask) + pr_crit("GIC CPU mask not found - kernel will fail to boot.\n"); + + return mask; +} + +static void __init gic_dist_init(struct gic_chip_data *gic) +{ + unsigned int i; + u32 cpumask; + unsigned int gic_irqs = gic->gic_irqs; + void __iomem *base = gic_data_dist_base(gic); + + writel_relaxed(0, base + GIC_DIST_CTRL); + + /* + * Set all global interrupts to be level triggered, active low. + */ + for (i = 32; i < gic_irqs; i += 16) + writel_relaxed(0, base + GIC_DIST_CONFIG + i * 4 / 16); + + /* + * Set all global interrupts to this CPU only. + */ + cpumask = gic_get_cpumask(gic); + cpumask |= cpumask << 8; + cpumask |= cpumask << 16; + for (i = 32; i < gic_irqs; i += 4) + writel_relaxed(cpumask, base + GIC_DIST_TARGET + i * 4 / 4); + + /* + * Set priority on all global interrupts. + */ + for (i = 32; i < gic_irqs; i += 4) + writel_relaxed(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4); + + /* + * Disable all interrupts. Leave the PPI and SGIs alone + * as these enables are banked registers. + */ + for (i = 32; i < gic_irqs; i += 32) + writel_relaxed(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32); + + writel_relaxed(1, base + GIC_DIST_CTRL); +} + +static void __cpuinit gic_cpu_init(struct gic_chip_data *gic) +{ + void __iomem *dist_base = gic_data_dist_base(gic); + void __iomem *base = gic_data_cpu_base(gic); + unsigned int cpu_mask, cpu = smp_processor_id(); + int i; + + /* + * Get what the GIC says our CPU mask is. + */ + BUG_ON(cpu >= NR_GIC_CPU_IF); + cpu_mask = gic_get_cpumask(gic); + gic_cpu_map[cpu] = cpu_mask; + + /* + * Clear our mask from the other map entries in case they're + * still undefined. + */ + for (i = 0; i < NR_GIC_CPU_IF; i++) + if (i != cpu) + gic_cpu_map[i] &= ~cpu_mask; + + /* + * Deal with the banked PPI and SGI interrupts - disable all + * PPI interrupts, ensure all SGI interrupts are enabled. + */ + writel_relaxed(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); + writel_relaxed(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); + + /* + * Set priority on PPI and SGI interrupts + */ + for (i = 0; i < 32; i += 4) + writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); + + writel_relaxed(0xf0, base + GIC_CPU_PRIMASK); + writel_relaxed(1, base + GIC_CPU_CTRL); +} + +#ifdef CONFIG_CPU_PM +/* + * Saves the GIC distributor registers during suspend or idle. Must be called + * with interrupts disabled but before powering down the GIC. After calling + * this function, no interrupts will be delivered by the GIC, and another + * platform-specific wakeup source must be enabled. + */ +static void gic_dist_save(unsigned int gic_nr) +{ + unsigned int gic_irqs; + void __iomem *dist_base; + int i; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + gic_irqs = gic_data[gic_nr].gic_irqs; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + + if (!dist_base) + return; + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++) + gic_data[gic_nr].saved_spi_conf[i] = + readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + gic_data[gic_nr].saved_spi_target[i] = + readl_relaxed(dist_base + GIC_DIST_TARGET + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) + gic_data[gic_nr].saved_spi_enable[i] = + readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); +} + +/* + * Restores the GIC distributor registers during resume or when coming out of + * idle. Must be called before enabling interrupts. If a level interrupt + * that occured while the GIC was suspended is still present, it will be + * handled normally, but any edge interrupts that occured will not be seen by + * the GIC and need to be handled by the platform-specific wakeup source. + */ +static void gic_dist_restore(unsigned int gic_nr) +{ + unsigned int gic_irqs; + unsigned int i; + void __iomem *dist_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + gic_irqs = gic_data[gic_nr].gic_irqs; + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + + if (!dist_base) + return; + + writel_relaxed(0, dist_base + GIC_DIST_CTRL); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 16); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_conf[i], + dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + writel_relaxed(0xa0a0a0a0, + dist_base + GIC_DIST_PRI + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 4); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_target[i], + dist_base + GIC_DIST_TARGET + i * 4); + + for (i = 0; i < DIV_ROUND_UP(gic_irqs, 32); i++) + writel_relaxed(gic_data[gic_nr].saved_spi_enable[i], + dist_base + GIC_DIST_ENABLE_SET + i * 4); + + writel_relaxed(1, dist_base + GIC_DIST_CTRL); +} + +static void gic_cpu_save(unsigned int gic_nr) +{ + int i; + u32 *ptr; + void __iomem *dist_base; + void __iomem *cpu_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); + + if (!dist_base || !cpu_base) + return; + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) + ptr[i] = readl_relaxed(dist_base + GIC_DIST_ENABLE_SET + i * 4); + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); + for (i = 0; i < DIV_ROUND_UP(32, 16); i++) + ptr[i] = readl_relaxed(dist_base + GIC_DIST_CONFIG + i * 4); + +} + +static void gic_cpu_restore(unsigned int gic_nr) +{ + int i; + u32 *ptr; + void __iomem *dist_base; + void __iomem *cpu_base; + + if (gic_nr >= MAX_GIC_NR) + BUG(); + + dist_base = gic_data_dist_base(&gic_data[gic_nr]); + cpu_base = gic_data_cpu_base(&gic_data[gic_nr]); + + if (!dist_base || !cpu_base) + return; + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_enable); + for (i = 0; i < DIV_ROUND_UP(32, 32); i++) + writel_relaxed(ptr[i], dist_base + GIC_DIST_ENABLE_SET + i * 4); + + ptr = __this_cpu_ptr(gic_data[gic_nr].saved_ppi_conf); + for (i = 0; i < DIV_ROUND_UP(32, 16); i++) + writel_relaxed(ptr[i], dist_base + GIC_DIST_CONFIG + i * 4); + + for (i = 0; i < DIV_ROUND_UP(32, 4); i++) + writel_relaxed(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4); + + writel_relaxed(0xf0, cpu_base + GIC_CPU_PRIMASK); + writel_relaxed(1, cpu_base + GIC_CPU_CTRL); +} + +static int gic_notifier(struct notifier_block *self, unsigned long cmd, void *v) +{ + int i; + + for (i = 0; i < MAX_GIC_NR; i++) { +#ifdef CONFIG_GIC_NON_BANKED + /* Skip over unused GICs */ + if (!gic_data[i].get_base) + continue; +#endif + switch (cmd) { + case CPU_PM_ENTER: + gic_cpu_save(i); + break; + case CPU_PM_ENTER_FAILED: + case CPU_PM_EXIT: + gic_cpu_restore(i); + break; + case CPU_CLUSTER_PM_ENTER: + gic_dist_save(i); + break; + case CPU_CLUSTER_PM_ENTER_FAILED: + case CPU_CLUSTER_PM_EXIT: + gic_dist_restore(i); + break; + } + } + + return NOTIFY_OK; +} + +static struct notifier_block gic_notifier_block = { + .notifier_call = gic_notifier, +}; + +static void __init gic_pm_init(struct gic_chip_data *gic) +{ + gic->saved_ppi_enable = __alloc_percpu(DIV_ROUND_UP(32, 32) * 4, + sizeof(u32)); + BUG_ON(!gic->saved_ppi_enable); + + gic->saved_ppi_conf = __alloc_percpu(DIV_ROUND_UP(32, 16) * 4, + sizeof(u32)); + BUG_ON(!gic->saved_ppi_conf); + + if (gic == &gic_data[0]) + cpu_pm_register_notifier(&gic_notifier_block); +} +#else +static void __init gic_pm_init(struct gic_chip_data *gic) +{ +} +#endif + +#ifdef CONFIG_SMP +void gic_raise_softirq(const struct cpumask *mask, unsigned int irq) +{ + int cpu; + unsigned long map = 0; + + /* Convert our logical CPU mask into a physical one. */ + for_each_cpu(cpu, mask) + map |= 1 << cpu_logical_map(cpu); + + /* + * Ensure that stores to Normal memory are visible to the + * other CPUs before issuing the IPI. + */ + dsb(); + + /* this always happens on GIC0 */ + writel_relaxed(map << 16 | irq, gic_data_dist_base(&gic_data[0]) + GIC_DIST_SOFTINT); +} +#endif + +static int gic_irq_domain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hw) +{ + if (hw < 32) { + irq_set_percpu_devid(irq); + irq_set_chip_and_handler(irq, &gic_chip, + handle_percpu_devid_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_NOAUTOEN); + } else { + irq_set_chip_and_handler(irq, &gic_chip, + handle_fasteoi_irq); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + } + irq_set_chip_data(irq, d->host_data); + return 0; +} + +static int gic_irq_domain_xlate(struct irq_domain *d, + struct device_node *controller, + const u32 *intspec, unsigned int intsize, + unsigned long *out_hwirq, unsigned int *out_type) +{ + if (d->of_node != controller) + return -EINVAL; + if (intsize < 3) + return -EINVAL; + + /* Get the interrupt number and add 16 to skip over SGIs */ + *out_hwirq = intspec[1] + 16; + + /* For SPIs, we need to add 16 more to get the GIC irq ID number */ + if (!intspec[0]) + *out_hwirq += 16; + + *out_type = intspec[2] & IRQ_TYPE_SENSE_MASK; + return 0; +} + +const struct irq_domain_ops gic_irq_domain_ops = { + .map = gic_irq_domain_map, + .xlate = gic_irq_domain_xlate, +}; + +void __init gic_init_bases(unsigned int gic_nr, int irq_start, + void __iomem *dist_base, void __iomem *cpu_base, + u32 percpu_offset, struct device_node *node) +{ + irq_hw_number_t hwirq_base; + struct gic_chip_data *gic; + int gic_irqs, irq_base, i; + + BUG_ON(gic_nr >= MAX_GIC_NR); + + gic = &gic_data[gic_nr]; +#ifdef CONFIG_GIC_NON_BANKED + if (percpu_offset) { /* Frankein-GIC without banked registers... */ + unsigned int cpu; + + gic->dist_base.percpu_base = alloc_percpu(void __iomem *); + gic->cpu_base.percpu_base = alloc_percpu(void __iomem *); + if (WARN_ON(!gic->dist_base.percpu_base || + !gic->cpu_base.percpu_base)) { + free_percpu(gic->dist_base.percpu_base); + free_percpu(gic->cpu_base.percpu_base); + return; + } + + for_each_possible_cpu(cpu) { + unsigned long offset = percpu_offset * cpu_logical_map(cpu); + *per_cpu_ptr(gic->dist_base.percpu_base, cpu) = dist_base + offset; + *per_cpu_ptr(gic->cpu_base.percpu_base, cpu) = cpu_base + offset; + } + + gic_set_base_accessor(gic, gic_get_percpu_base); + } else +#endif + { /* Normal, sane GIC... */ + WARN(percpu_offset, + "GIC_NON_BANKED not enabled, ignoring %08x offset!", + percpu_offset); + gic->dist_base.common_base = dist_base; + gic->cpu_base.common_base = cpu_base; + gic_set_base_accessor(gic, gic_get_common_base); + } + + /* + * Initialize the CPU interface map to all CPUs. + * It will be refined as each CPU probes its ID. + */ + for (i = 0; i < NR_GIC_CPU_IF; i++) + gic_cpu_map[i] = 0xff; + + /* + * For primary GICs, skip over SGIs. + * For secondary GICs, skip over PPIs, too. + */ + if (gic_nr == 0 && (irq_start & 31) > 0) { + hwirq_base = 16; + if (irq_start != -1) + irq_start = (irq_start & ~31) + 16; + } else { + hwirq_base = 32; + } + + /* + * Find out how many interrupts are supported. + * The GIC only supports up to 1020 interrupt sources. + */ + gic_irqs = readl_relaxed(gic_data_dist_base(gic) + GIC_DIST_CTR) & 0x1f; + gic_irqs = (gic_irqs + 1) * 32; + if (gic_irqs > 1020) + gic_irqs = 1020; + gic->gic_irqs = gic_irqs; + + gic_irqs -= hwirq_base; /* calculate # of irqs to allocate */ + irq_base = irq_alloc_descs(irq_start, 16, gic_irqs, numa_node_id()); + if (IS_ERR_VALUE(irq_base)) { + WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n", + irq_start); + irq_base = irq_start; + } + gic->domain = irq_domain_add_legacy(node, gic_irqs, irq_base, + hwirq_base, &gic_irq_domain_ops, gic); + if (WARN_ON(!gic->domain)) + return; + +#ifdef CONFIG_SMP + set_smp_cross_call(gic_raise_softirq); +#endif + + set_handle_irq(gic_handle_irq); + + gic_chip.flags |= gic_arch_extn.flags; + gic_dist_init(gic); + gic_cpu_init(gic); + gic_pm_init(gic); +} + +void __cpuinit gic_secondary_init(unsigned int gic_nr) +{ + BUG_ON(gic_nr >= MAX_GIC_NR); + + gic_cpu_init(&gic_data[gic_nr]); +} + +#ifdef CONFIG_OF +static int gic_cnt __initdata = 0; + +int __init gic_of_init(struct device_node *node, struct device_node *parent) +{ + void __iomem *cpu_base; + void __iomem *dist_base; + u32 percpu_offset; + int irq; + + if (WARN_ON(!node)) + return -ENODEV; + + dist_base = of_iomap(node, 0); + WARN(!dist_base, "unable to map gic dist registers\n"); + + cpu_base = of_iomap(node, 1); + WARN(!cpu_base, "unable to map gic cpu registers\n"); + + if (of_property_read_u32(node, "cpu-offset", &percpu_offset)) + percpu_offset = 0; + + gic_init_bases(gic_cnt, -1, dist_base, cpu_base, percpu_offset, node); + + if (parent) { + irq = irq_of_parse_and_map(node, 0); + gic_cascade_irq(gic_cnt, irq); + } + gic_cnt++; + return 0; +} +IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init); +IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init); +IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init); +IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init); + +#endif diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c new file mode 100644 index 000000000000..3cf97aaebe40 --- /dev/null +++ b/drivers/irqchip/irq-vic.c @@ -0,0 +1,489 @@ +/* + * linux/arch/arm/common/vic.c + * + * Copyright (C) 1999 - 2003 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/export.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/syscore_ops.h> +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/irqchip/arm-vic.h> + +#include <asm/exception.h> +#include <asm/mach/irq.h> + +#include "irqchip.h" + +#define VIC_IRQ_STATUS 0x00 +#define VIC_FIQ_STATUS 0x04 +#define VIC_INT_SELECT 0x0c /* 1 = FIQ, 0 = IRQ */ +#define VIC_INT_SOFT 0x18 +#define VIC_INT_SOFT_CLEAR 0x1c +#define VIC_PROTECT 0x20 +#define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */ +#define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */ + +#define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */ +#define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */ +#define VIC_ITCR 0x300 /* VIC test control register */ + +#define VIC_VECT_CNTL_ENABLE (1 << 5) + +#define VIC_PL192_VECT_ADDR 0xF00 + +/** + * struct vic_device - VIC PM device + * @irq: The IRQ number for the base of the VIC. + * @base: The register base for the VIC. + * @valid_sources: A bitmask of valid interrupts + * @resume_sources: A bitmask of interrupts for resume. + * @resume_irqs: The IRQs enabled for resume. + * @int_select: Save for VIC_INT_SELECT. + * @int_enable: Save for VIC_INT_ENABLE. + * @soft_int: Save for VIC_INT_SOFT. + * @protect: Save for VIC_PROTECT. + * @domain: The IRQ domain for the VIC. + */ +struct vic_device { + void __iomem *base; + int irq; + u32 valid_sources; + u32 resume_sources; + u32 resume_irqs; + u32 int_select; + u32 int_enable; + u32 soft_int; + u32 protect; + struct irq_domain *domain; +}; + +/* we cannot allocate memory when VICs are initially registered */ +static struct vic_device vic_devices[CONFIG_ARM_VIC_NR]; + +static int vic_id; + +static void vic_handle_irq(struct pt_regs *regs); + +/** + * vic_init2 - common initialisation code + * @base: Base of the VIC. + * + * Common initialisation code for registration + * and resume. +*/ +static void vic_init2(void __iomem *base) +{ + int i; + + for (i = 0; i < 16; i++) { + void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); + writel(VIC_VECT_CNTL_ENABLE | i, reg); + } + + writel(32, base + VIC_PL190_DEF_VECT_ADDR); +} + +#ifdef CONFIG_PM +static void resume_one_vic(struct vic_device *vic) +{ + void __iomem *base = vic->base; + + printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base); + + /* re-initialise static settings */ + vic_init2(base); + + writel(vic->int_select, base + VIC_INT_SELECT); + writel(vic->protect, base + VIC_PROTECT); + + /* set the enabled ints and then clear the non-enabled */ + writel(vic->int_enable, base + VIC_INT_ENABLE); + writel(~vic->int_enable, base + VIC_INT_ENABLE_CLEAR); + + /* and the same for the soft-int register */ + + writel(vic->soft_int, base + VIC_INT_SOFT); + writel(~vic->soft_int, base + VIC_INT_SOFT_CLEAR); +} + +static void vic_resume(void) +{ + int id; + + for (id = vic_id - 1; id >= 0; id--) + resume_one_vic(vic_devices + id); +} + +static void suspend_one_vic(struct vic_device *vic) +{ + void __iomem *base = vic->base; + + printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base); + + vic->int_select = readl(base + VIC_INT_SELECT); + vic->int_enable = readl(base + VIC_INT_ENABLE); + vic->soft_int = readl(base + VIC_INT_SOFT); + vic->protect = readl(base + VIC_PROTECT); + + /* set the interrupts (if any) that are used for + * resuming the system */ + + writel(vic->resume_irqs, base + VIC_INT_ENABLE); + writel(~vic->resume_irqs, base + VIC_INT_ENABLE_CLEAR); +} + +static int vic_suspend(void) +{ + int id; + + for (id = 0; id < vic_id; id++) + suspend_one_vic(vic_devices + id); + + return 0; +} + +struct syscore_ops vic_syscore_ops = { + .suspend = vic_suspend, + .resume = vic_resume, +}; + +/** + * vic_pm_init - initicall to register VIC pm + * + * This is called via late_initcall() to register + * the resources for the VICs due to the early + * nature of the VIC's registration. +*/ +static int __init vic_pm_init(void) +{ + if (vic_id > 0) + register_syscore_ops(&vic_syscore_ops); + + return 0; +} +late_initcall(vic_pm_init); +#endif /* CONFIG_PM */ + +static struct irq_chip vic_chip; + +static int vic_irqdomain_map(struct irq_domain *d, unsigned int irq, + irq_hw_number_t hwirq) +{ + struct vic_device *v = d->host_data; + + /* Skip invalid IRQs, only register handlers for the real ones */ + if (!(v->valid_sources & (1 << hwirq))) + return -ENOTSUPP; + irq_set_chip_and_handler(irq, &vic_chip, handle_level_irq); + irq_set_chip_data(irq, v->base); + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); + return 0; +} + +/* + * Handle each interrupt in a single VIC. Returns non-zero if we've + * handled at least one interrupt. This reads the status register + * before handling each interrupt, which is necessary given that + * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. + */ +static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) +{ + u32 stat, irq; + int handled = 0; + + while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { + irq = ffs(stat) - 1; + handle_IRQ(irq_find_mapping(vic->domain, irq), regs); + handled = 1; + } + + return handled; +} + +/* + * Keep iterating over all registered VIC's until there are no pending + * interrupts. + */ +static asmlinkage void __exception_irq_entry vic_handle_irq(struct pt_regs *regs) +{ + int i, handled; + + do { + for (i = 0, handled = 0; i < vic_id; ++i) + handled |= handle_one_vic(&vic_devices[i], regs); + } while (handled); +} + +static struct irq_domain_ops vic_irqdomain_ops = { + .map = vic_irqdomain_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +/** + * vic_register() - Register a VIC. + * @base: The base address of the VIC. + * @irq: The base IRQ for the VIC. + * @valid_sources: bitmask of valid interrupts + * @resume_sources: bitmask of interrupts allowed for resume sources. + * @node: The device tree node associated with the VIC. + * + * Register the VIC with the system device tree so that it can be notified + * of suspend and resume requests and ensure that the correct actions are + * taken to re-instate the settings on resume. + * + * This also configures the IRQ domain for the VIC. + */ +static void __init vic_register(void __iomem *base, unsigned int irq, + u32 valid_sources, u32 resume_sources, + struct device_node *node) +{ + struct vic_device *v; + int i; + + if (vic_id >= ARRAY_SIZE(vic_devices)) { + printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__); + return; + } + + v = &vic_devices[vic_id]; + v->base = base; + v->valid_sources = valid_sources; + v->resume_sources = resume_sources; + v->irq = irq; + set_handle_irq(vic_handle_irq); + vic_id++; + v->domain = irq_domain_add_simple(node, fls(valid_sources), irq, + &vic_irqdomain_ops, v); + /* create an IRQ mapping for each valid IRQ */ + for (i = 0; i < fls(valid_sources); i++) + if (valid_sources & (1 << i)) + irq_create_mapping(v->domain, i); +} + +static void vic_ack_irq(struct irq_data *d) +{ + void __iomem *base = irq_data_get_irq_chip_data(d); + unsigned int irq = d->hwirq; + writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); + /* moreover, clear the soft-triggered, in case it was the reason */ + writel(1 << irq, base + VIC_INT_SOFT_CLEAR); +} + +static void vic_mask_irq(struct irq_data *d) +{ + void __iomem *base = irq_data_get_irq_chip_data(d); + unsigned int irq = d->hwirq; + writel(1 << irq, base + VIC_INT_ENABLE_CLEAR); +} + +static void vic_unmask_irq(struct irq_data *d) +{ + void __iomem *base = irq_data_get_irq_chip_data(d); + unsigned int irq = d->hwirq; + writel(1 << irq, base + VIC_INT_ENABLE); +} + +#if defined(CONFIG_PM) +static struct vic_device *vic_from_irq(unsigned int irq) +{ + struct vic_device *v = vic_devices; + unsigned int base_irq = irq & ~31; + int id; + + for (id = 0; id < vic_id; id++, v++) { + if (v->irq == base_irq) + return v; + } + + return NULL; +} + +static int vic_set_wake(struct irq_data *d, unsigned int on) +{ + struct vic_device *v = vic_from_irq(d->irq); + unsigned int off = d->hwirq; + u32 bit = 1 << off; + + if (!v) + return -EINVAL; + + if (!(bit & v->resume_sources)) + return -EINVAL; + + if (on) + v->resume_irqs |= bit; + else + v->resume_irqs &= ~bit; + + return 0; +} +#else +#define vic_set_wake NULL +#endif /* CONFIG_PM */ + +static struct irq_chip vic_chip = { + .name = "VIC", + .irq_ack = vic_ack_irq, + .irq_mask = vic_mask_irq, + .irq_unmask = vic_unmask_irq, + .irq_set_wake = vic_set_wake, +}; + +static void __init vic_disable(void __iomem *base) +{ + writel(0, base + VIC_INT_SELECT); + writel(0, base + VIC_INT_ENABLE); + writel(~0, base + VIC_INT_ENABLE_CLEAR); + writel(0, base + VIC_ITCR); + writel(~0, base + VIC_INT_SOFT_CLEAR); +} + +static void __init vic_clear_interrupts(void __iomem *base) +{ + unsigned int i; + + writel(0, base + VIC_PL190_VECT_ADDR); + for (i = 0; i < 19; i++) { + unsigned int value; + + value = readl(base + VIC_PL190_VECT_ADDR); + writel(value, base + VIC_PL190_VECT_ADDR); + } +} + +/* + * The PL190 cell from ARM has been modified by ST to handle 64 interrupts. + * The original cell has 32 interrupts, while the modified one has 64, + * replocating two blocks 0x00..0x1f in 0x20..0x3f. In that case + * the probe function is called twice, with base set to offset 000 + * and 020 within the page. We call this "second block". + */ +static void __init vic_init_st(void __iomem *base, unsigned int irq_start, + u32 vic_sources, struct device_node *node) +{ + unsigned int i; + int vic_2nd_block = ((unsigned long)base & ~PAGE_MASK) != 0; + + /* Disable all interrupts initially. */ + vic_disable(base); + + /* + * Make sure we clear all existing interrupts. The vector registers + * in this cell are after the second block of general registers, + * so we can address them using standard offsets, but only from + * the second base address, which is 0x20 in the page + */ + if (vic_2nd_block) { + vic_clear_interrupts(base); + + /* ST has 16 vectors as well, but we don't enable them by now */ + for (i = 0; i < 16; i++) { + void __iomem *reg = base + VIC_VECT_CNTL0 + (i * 4); + writel(0, reg); + } + + writel(32, base + VIC_PL190_DEF_VECT_ADDR); + } + + vic_register(base, irq_start, vic_sources, 0, node); +} + +void __init __vic_init(void __iomem *base, int irq_start, + u32 vic_sources, u32 resume_sources, + struct device_node *node) +{ + unsigned int i; + u32 cellid = 0; + enum amba_vendor vendor; + + /* Identify which VIC cell this one is, by reading the ID */ + for (i = 0; i < 4; i++) { + void __iomem *addr; + addr = (void __iomem *)((u32)base & PAGE_MASK) + 0xfe0 + (i * 4); + cellid |= (readl(addr) & 0xff) << (8 * i); + } + vendor = (cellid >> 12) & 0xff; + printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n", + base, cellid, vendor); + + switch(vendor) { + case AMBA_VENDOR_ST: + vic_init_st(base, irq_start, vic_sources, node); + return; + default: + printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n"); + /* fall through */ + case AMBA_VENDOR_ARM: + break; + } + + /* Disable all interrupts initially. */ + vic_disable(base); + + /* Make sure we clear all existing interrupts */ + vic_clear_interrupts(base); + + vic_init2(base); + + vic_register(base, irq_start, vic_sources, resume_sources, node); +} + +/** + * vic_init() - initialise a vectored interrupt controller + * @base: iomem base address + * @irq_start: starting interrupt number, must be muliple of 32 + * @vic_sources: bitmask of interrupt sources to allow + * @resume_sources: bitmask of interrupt sources to allow for resume + */ +void __init vic_init(void __iomem *base, unsigned int irq_start, + u32 vic_sources, u32 resume_sources) +{ + __vic_init(base, irq_start, vic_sources, resume_sources, NULL); +} + +#ifdef CONFIG_OF +int __init vic_of_init(struct device_node *node, struct device_node *parent) +{ + void __iomem *regs; + + if (WARN(parent, "non-root VICs are not supported")) + return -EINVAL; + + regs = of_iomap(node, 0); + if (WARN_ON(!regs)) + return -EIO; + + /* + * Passing 0 as first IRQ makes the simple domain allocate descriptors + */ + __vic_init(regs, 0, ~0, ~0, node); + + return 0; +} +IRQCHIP_DECLARE(arm_pl190_vic, "arm,pl190-vic", vic_of_init); +IRQCHIP_DECLARE(arm_pl192_vic, "arm,pl192-vic", vic_of_init); +IRQCHIP_DECLARE(arm_versatile_vic, "arm,versatile-vic", vic_of_init); +#endif /* CONFIG OF */ diff --git a/drivers/irqchip/irqchip.c b/drivers/irqchip/irqchip.c new file mode 100644 index 000000000000..f496afce29de --- /dev/null +++ b/drivers/irqchip/irqchip.c @@ -0,0 +1,30 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/init.h> +#include <linux/of_irq.h> + +#include "irqchip.h" + +/* + * This special of_device_id is the sentinel at the end of the + * of_device_id[] array of all irqchips. It is automatically placed at + * the end of the array by the linker, thanks to being part of a + * special section. + */ +static const struct of_device_id +irqchip_of_match_end __used __section(__irqchip_of_end); + +extern struct of_device_id __irqchip_begin[]; + +void __init irqchip_init(void) +{ + of_irq_init(__irqchip_begin); +} diff --git a/drivers/irqchip/irqchip.h b/drivers/irqchip/irqchip.h new file mode 100644 index 000000000000..e445ba2d6add --- /dev/null +++ b/drivers/irqchip/irqchip.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2012 Thomas Petazzoni + * + * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef _IRQCHIP_H +#define _IRQCHIP_H + +/* + * This macro must be used by the different irqchip drivers to declare + * the association between their DT compatible string and their + * initialization function. + * + * @name: name that must be unique accross all IRQCHIP_DECLARE of the + * same file. + * @compstr: compatible string of the irqchip driver + * @fn: initialization function + */ +#define IRQCHIP_DECLARE(name,compstr,fn) \ + static const struct of_device_id irqchip_of_match_##name \ + __used __section(__irqchip_of_table) \ + = { .compatible = compstr, .data = fn } + +#endif diff --git a/drivers/irqchip/spear-shirq.c b/drivers/irqchip/spear-shirq.c index 80e1d2fd9d4c..8527743b5cef 100644 --- a/drivers/irqchip/spear-shirq.c +++ b/drivers/irqchip/spear-shirq.c @@ -25,6 +25,8 @@ #include <linux/of_irq.h> #include <linux/spinlock.h> +#include "irqchip.h" + static DEFINE_SPINLOCK(lock); /* spear300 shared irq registers offsets and masks */ @@ -300,6 +302,7 @@ int __init spear300_shirq_of_init(struct device_node *np, return shirq_init(spear300_shirq_blocks, ARRAY_SIZE(spear300_shirq_blocks), np); } +IRQCHIP_DECLARE(spear300_shirq, "st,spear300-shirq", spear300_shirq_of_init); int __init spear310_shirq_of_init(struct device_node *np, struct device_node *parent) @@ -307,6 +310,7 @@ int __init spear310_shirq_of_init(struct device_node *np, return shirq_init(spear310_shirq_blocks, ARRAY_SIZE(spear310_shirq_blocks), np); } +IRQCHIP_DECLARE(spear310_shirq, "st,spear310-shirq", spear310_shirq_of_init); int __init spear320_shirq_of_init(struct device_node *np, struct device_node *parent) @@ -314,3 +318,4 @@ int __init spear320_shirq_of_init(struct device_node *np, return shirq_init(spear320_shirq_blocks, ARRAY_SIZE(spear320_shirq_blocks), np); } +IRQCHIP_DECLARE(spear320_shirq, "st,spear320-shirq", spear320_shirq_of_init); diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 268f45d42394..1192518e1aca 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -26,22 +26,18 @@ #include <linux/fs.h> #include <linux/platform_device.h> #include <linux/uaccess.h> +#include <linux/irqchip/arm-gic.h> #include <linux/mfd/core.h> #include <linux/mfd/dbx500-prcmu.h> #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/db8500-prcmu.h> #include <linux/regulator/machine.h> #include <linux/cpufreq.h> -#include <asm/hardware/gic.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/db8500-regs.h> -#include <mach/id.h> #include "dbx500-prcmu-regs.h" -/* Offset for the firmware version within the TCPM */ -#define PRCMU_FW_VERSION_OFFSET 0xA4 - /* Index of different voltages to be used when accessing AVSData */ #define PRCM_AVS_BASE 0x2FC #define PRCM_AVS_VBB_RET (PRCM_AVS_BASE + 0x0) @@ -216,10 +212,8 @@ #define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1) #define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2) #define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3) -#define PRCMU_I2C_WRITE(slave) \ - (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0)) -#define PRCMU_I2C_READ(slave) \ - (((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0)) +#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6)) +#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6)) #define PRCMU_I2C_STOP_EN BIT(3) /* Mailbox 5 ACKs */ @@ -1049,12 +1043,13 @@ int db8500_prcmu_get_ddr_opp(void) * * This function sets the operating point of the DDR. */ +static bool enable_set_ddr_opp; int db8500_prcmu_set_ddr_opp(u8 opp) { if (opp < DDR_100_OPP || opp > DDR_25_OPP) return -EINVAL; /* Changing the DDR OPP can hang the hardware pre-v21 */ - if (cpu_is_u8500v20_or_later() && !cpu_is_u8500v20()) + if (enable_set_ddr_opp) writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW); return 0; @@ -2706,21 +2701,43 @@ static struct irq_chip prcmu_irq_chip = { .irq_unmask = prcmu_irq_unmask, }; -static char *fw_project_name(u8 project) +static __init char *fw_project_name(u32 project) { switch (project) { case PRCMU_FW_PROJECT_U8500: return "U8500"; - case PRCMU_FW_PROJECT_U8500_C2: - return "U8500 C2"; + case PRCMU_FW_PROJECT_U8400: + return "U8400"; case PRCMU_FW_PROJECT_U9500: return "U9500"; - case PRCMU_FW_PROJECT_U9500_C2: - return "U9500 C2"; + case PRCMU_FW_PROJECT_U8500_MBB: + return "U8500 MBB"; + case PRCMU_FW_PROJECT_U8500_C1: + return "U8500 C1"; + case PRCMU_FW_PROJECT_U8500_C2: + return "U8500 C2"; + case PRCMU_FW_PROJECT_U8500_C3: + return "U8500 C3"; + case PRCMU_FW_PROJECT_U8500_C4: + return "U8500 C4"; + case PRCMU_FW_PROJECT_U9500_MBL: + return "U9500 MBL"; + case PRCMU_FW_PROJECT_U8500_MBL: + return "U8500 MBL"; + case PRCMU_FW_PROJECT_U8500_MBL2: + return "U8500 MBL2"; case PRCMU_FW_PROJECT_U8520: - return "U8520"; + return "U8520 MBL"; case PRCMU_FW_PROJECT_U8420: return "U8420"; + case PRCMU_FW_PROJECT_U9540: + return "U9540"; + case PRCMU_FW_PROJECT_A9420: + return "A9420"; + case PRCMU_FW_PROJECT_L8540: + return "L8540"; + case PRCMU_FW_PROJECT_L8580: + return "L8580"; default: return "Unknown"; } @@ -2766,36 +2783,44 @@ static int db8500_irq_init(struct device_node *np) return 0; } -void __init db8500_prcmu_early_init(void) +static void dbx500_fw_version_init(struct platform_device *pdev, + u32 version_offset) { - if (cpu_is_u8500v2() || cpu_is_u9540()) { - void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K); - - if (tcpm_base != NULL) { - u32 version; - version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET); - fw_info.version.project = version & 0xFF; - fw_info.version.api_version = (version >> 8) & 0xFF; - fw_info.version.func_version = (version >> 16) & 0xFF; - fw_info.version.errata = (version >> 24) & 0xFF; - fw_info.valid = true; - pr_info("PRCMU firmware: %s, version %d.%d.%d\n", - fw_project_name(fw_info.version.project), - (version >> 8) & 0xFF, (version >> 16) & 0xFF, - (version >> 24) & 0xFF); - iounmap(tcpm_base); - } + struct resource *res; + void __iomem *tcpm_base; - if (cpu_is_u9540()) - tcdm_base = ioremap_nocache(U8500_PRCMU_TCDM_BASE, - SZ_4K + SZ_8K) + SZ_8K; - else - tcdm_base = __io_address(U8500_PRCMU_TCDM_BASE); - } else { - pr_err("prcmu: Unsupported chip version\n"); - BUG(); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "prcmu-tcpm"); + if (!res) { + dev_err(&pdev->dev, + "Error: no prcmu tcpm memory region provided\n"); + return; } + tcpm_base = ioremap(res->start, resource_size(res)); + if (tcpm_base != NULL) { + u32 version; + + version = readl(tcpm_base + version_offset); + fw_info.version.project = (version & 0xFF); + fw_info.version.api_version = (version >> 8) & 0xFF; + fw_info.version.func_version = (version >> 16) & 0xFF; + fw_info.version.errata = (version >> 24) & 0xFF; + strncpy(fw_info.version.project_name, + fw_project_name(fw_info.version.project), + PRCMU_FW_PROJECT_NAME_LEN); + fw_info.valid = true; + pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n", + fw_info.version.project_name, + fw_info.version.project, + fw_info.version.api_version, + fw_info.version.func_version, + fw_info.version.errata); + iounmap(tcpm_base); + } +} +void __init db8500_prcmu_early_init(void) +{ spin_lock_init(&mb0_transfer.lock); spin_lock_init(&mb0_transfer.dbb_irqs_lock); mutex_init(&mb0_transfer.ac_wake_lock); @@ -3105,23 +3130,30 @@ static void db8500_prcmu_update_cpufreq(void) */ static int db8500_prcmu_probe(struct platform_device *pdev) { - struct ab8500_platform_data *ab8500_platdata = pdev->dev.platform_data; struct device_node *np = pdev->dev.of_node; + struct prcmu_pdata *pdata = dev_get_platdata(&pdev->dev); int irq = 0, err = 0, i; - - if (ux500_is_svp()) - return -ENODEV; + struct resource *res; init_prcm_registers(); + dbx500_fw_version_init(pdev, pdata->version_offset); + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm"); + if (!res) { + dev_err(&pdev->dev, "no prcmu tcdm region provided\n"); + return -ENOENT; + } + tcdm_base = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); + /* Clean up the mailbox interrupts after pre-kernel code. */ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR); - if (np) - irq = platform_get_irq(pdev, 0); - - if (!np || irq <= 0) - irq = IRQ_DB8500_PRCMU1; + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + dev_err(&pdev->dev, "no prcmu irq provided\n"); + return -ENOENT; + } err = request_threaded_irq(irq, prcmu_irq_handler, prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL); @@ -3135,13 +3167,12 @@ static int db8500_prcmu_probe(struct platform_device *pdev) for (i = 0; i < ARRAY_SIZE(db8500_prcmu_devs); i++) { if (!strcmp(db8500_prcmu_devs[i].name, "ab8500-core")) { - db8500_prcmu_devs[i].platform_data = ab8500_platdata; + db8500_prcmu_devs[i].platform_data = pdata->ab_platdata; db8500_prcmu_devs[i].pdata_size = sizeof(struct ab8500_platform_data); } } - if (cpu_is_u8500v20_or_later()) - prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); + prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); db8500_prcmu_update_cpufreq(); |