summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpu/drm/nouveau/nouveau_mem.c2
-rw-r--r--drivers/gpu/drm/nouveau/nvkm/engine/device/base.c1
-rw-r--r--drivers/platform/x86/asus-nb-wmi.c32
-rw-r--r--drivers/platform/x86/asus-wmi.c16
-rw-r--r--drivers/platform/x86/asus-wmi.h1
-rw-r--r--drivers/video/console/newport_con.c7
-rw-r--r--drivers/video/fbdev/Kconfig20
-rw-r--r--drivers/video/fbdev/Makefile1
-rw-r--r--drivers/video/fbdev/amba-clcd.c986
-rw-r--r--drivers/video/fbdev/core/fbcon.c12
-rw-r--r--drivers/video/fbdev/core/fbcon.h7
-rw-r--r--drivers/video/fbdev/core/fbcon_rotate.c1
-rw-r--r--drivers/video/fbdev/core/tileblit.c1
13 files changed, 1067 insertions, 20 deletions
diff --git a/drivers/gpu/drm/nouveau/nouveau_mem.c b/drivers/gpu/drm/nouveau/nouveau_mem.c
index b1bb542d3115..e5fae57fffbd 100644
--- a/drivers/gpu/drm/nouveau/nouveau_mem.c
+++ b/drivers/gpu/drm/nouveau/nouveau_mem.c
@@ -176,6 +176,8 @@ void
nouveau_mem_del(struct ttm_mem_reg *reg)
{
struct nouveau_mem *mem = nouveau_mem(reg);
+ if (!mem)
+ return;
nouveau_mem_fini(mem);
kfree(reg->mm_node);
reg->mm_node = NULL;
diff --git a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
index 9f4ac2672cf2..dcb70677d0ac 100644
--- a/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
+++ b/drivers/gpu/drm/nouveau/nvkm/engine/device/base.c
@@ -3149,6 +3149,7 @@ nvkm_device_ctor(const struct nvkm_device_func *func,
case 0x168: device->chip = &nv168_chipset; break;
default:
nvdev_error(device, "unknown chipset (%08x)\n", boot0);
+ ret = -ENODEV;
goto done;
}
diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c
index 680c3640e013..1d9fbabd02fb 100644
--- a/drivers/platform/x86/asus-nb-wmi.c
+++ b/drivers/platform/x86/asus-nb-wmi.c
@@ -115,6 +115,10 @@ static struct quirk_entry quirk_asus_vendor_backlight = {
.wmi_backlight_set_devstate = true,
};
+static struct quirk_entry quirk_asus_use_kbd_dock_devid = {
+ .use_kbd_dock_devid = true,
+};
+
static int dmi_matched(const struct dmi_system_id *dmi)
{
pr_info("Identified laptop model '%s'\n", dmi->ident);
@@ -488,6 +492,34 @@ static const struct dmi_system_id asus_quirks[] = {
},
.driver_data = &quirk_asus_vendor_backlight,
},
+ {
+ .callback = dmi_matched,
+ .ident = "Asus Transformer T100TA / T100HA / T100CHI",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ /* Match *T100* */
+ DMI_MATCH(DMI_PRODUCT_NAME, "T100"),
+ },
+ .driver_data = &quirk_asus_use_kbd_dock_devid,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "Asus Transformer T101HA",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "T101HA"),
+ },
+ .driver_data = &quirk_asus_use_kbd_dock_devid,
+ },
+ {
+ .callback = dmi_matched,
+ .ident = "Asus Transformer T200TA",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "T200TA"),
+ },
+ .driver_data = &quirk_asus_use_kbd_dock_devid,
+ },
{},
};
diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c
index fa39ff030bd7..39e1a6396e08 100644
--- a/drivers/platform/x86/asus-wmi.c
+++ b/drivers/platform/x86/asus-wmi.c
@@ -365,12 +365,14 @@ static int asus_wmi_input_init(struct asus_wmi *asus)
if (err)
goto err_free_dev;
- result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_KBD_DOCK);
- if (result >= 0) {
- input_set_capability(asus->inputdev, EV_SW, SW_TABLET_MODE);
- input_report_switch(asus->inputdev, SW_TABLET_MODE, !result);
- } else if (result != -ENODEV) {
- pr_err("Error checking for keyboard-dock: %d\n", result);
+ if (asus->driver->quirks->use_kbd_dock_devid) {
+ result = asus_wmi_get_devstate_simple(asus, ASUS_WMI_DEVID_KBD_DOCK);
+ if (result >= 0) {
+ input_set_capability(asus->inputdev, EV_SW, SW_TABLET_MODE);
+ input_report_switch(asus->inputdev, SW_TABLET_MODE, !result);
+ } else if (result != -ENODEV) {
+ pr_err("Error checking for keyboard-dock: %d\n", result);
+ }
}
err = input_register_device(asus->inputdev);
@@ -2115,7 +2117,7 @@ static void asus_wmi_handle_event_code(int code, struct asus_wmi *asus)
return;
}
- if (code == NOTIFY_KBD_DOCK_CHANGE) {
+ if (asus->driver->quirks->use_kbd_dock_devid && code == NOTIFY_KBD_DOCK_CHANGE) {
result = asus_wmi_get_devstate_simple(asus,
ASUS_WMI_DEVID_KBD_DOCK);
if (result >= 0) {
diff --git a/drivers/platform/x86/asus-wmi.h b/drivers/platform/x86/asus-wmi.h
index 4f31b68642a0..1a95c172f94b 100644
--- a/drivers/platform/x86/asus-wmi.h
+++ b/drivers/platform/x86/asus-wmi.h
@@ -33,6 +33,7 @@ struct quirk_entry {
bool wmi_backlight_native;
bool wmi_backlight_set_devstate;
bool wmi_force_als_set;
+ bool use_kbd_dock_devid;
int wapf;
/*
* For machines with AMD graphic chips, it will send out WMI event
diff --git a/drivers/video/console/newport_con.c b/drivers/video/console/newport_con.c
index 72f146d047d9..cd51b7a17a21 100644
--- a/drivers/video/console/newport_con.c
+++ b/drivers/video/console/newport_con.c
@@ -35,12 +35,6 @@
#define FONT_DATA ((unsigned char *)font_vga_8x16.data)
-/* borrowed from fbcon.c */
-#define REFCOUNT(fd) (((int *)(fd))[-1])
-#define FNTSIZE(fd) (((int *)(fd))[-2])
-#define FNTCHARCNT(fd) (((int *)(fd))[-3])
-#define FONT_EXTRA_WORDS 3
-
static unsigned char *font_data[MAX_NR_CONSOLES];
static struct newport_regs *npregs;
@@ -522,6 +516,7 @@ static int newport_set_font(int unit, struct console_font *op)
FNTSIZE(new_data) = size;
FNTCHARCNT(new_data) = op->charcount;
REFCOUNT(new_data) = 0; /* usage counter */
+ FNTSUM(new_data) = 0;
p = new_data;
for (i = 0; i < op->charcount; i++) {
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index b2c9dd4f0cb5..402e85450bb5 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -272,6 +272,26 @@ config FB_PM2_FIFO_DISCONNECT
help
Support the Permedia2 FIFO disconnect feature.
+config FB_ARMCLCD
+ tristate "ARM PrimeCell PL110 support"
+ depends on ARM || ARM64 || COMPILE_TEST
+ depends on FB && ARM_AMBA && HAS_IOMEM
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ select FB_MODE_HELPERS if OF
+ select VIDEOMODE_HELPERS if OF
+ select BACKLIGHT_CLASS_DEVICE if OF
+ help
+ This framebuffer device driver is for the ARM PrimeCell PL110
+ Colour LCD controller. ARM PrimeCells provide the building
+ blocks for System on a Chip devices.
+
+ If you want to compile this as a module (=code which can be
+ inserted into and removed from the running kernel), say M
+ here and read <file:Documentation/kbuild/modules.rst>. The module
+ will be called amba-clcd.
+
config FB_ACORN
bool "Acorn VIDC support"
depends on (FB = y) && ARM && ARCH_ACORN
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index cad4fb64442a..a0705b99e643 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_FB_HIT) += hitfb.o
obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
obj-$(CONFIG_FB_PVR2) += pvr2fb.o
obj-$(CONFIG_FB_VOODOO1) += sstfb.o
+obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
obj-$(CONFIG_FB_GOLDFISH) += goldfishfb.o
obj-$(CONFIG_FB_68328) += 68328fb.o
obj-$(CONFIG_FB_GBE) += gbefb.o
diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
new file mode 100644
index 000000000000..b7682de412d8
--- /dev/null
+++ b/drivers/video/fbdev/amba-clcd.c
@@ -0,0 +1,986 @@
+/*
+ * linux/drivers/video/amba-clcd.c
+ *
+ * Copyright (C) 2001 ARM Limited, by David A Rusling
+ * Updated to 2.5, Deep Blue Solutions Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ * ARM PrimeCell PL110 Color LCD Controller
+ */
+#include <linux/amba/bus.h>
+#include <linux/amba/clcd.h>
+#include <linux/backlight.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_graph.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/videomode.h>
+
+#define to_clcd(info) container_of(info, struct clcd_fb, fb)
+
+/* This is limited to 16 characters when displayed by X startup */
+static const char *clcd_name = "CLCD FB";
+
+/*
+ * Unfortunately, the enable/disable functions may be called either from
+ * process or IRQ context, and we _need_ to delay. This is _not_ good.
+ */
+static inline void clcdfb_sleep(unsigned int ms)
+{
+ if (in_atomic()) {
+ mdelay(ms);
+ } else {
+ msleep(ms);
+ }
+}
+
+static inline void clcdfb_set_start(struct clcd_fb *fb)
+{
+ unsigned long ustart = fb->fb.fix.smem_start;
+ unsigned long lstart;
+
+ ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
+ lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
+
+ writel(ustart, fb->regs + CLCD_UBAS);
+ writel(lstart, fb->regs + CLCD_LBAS);
+}
+
+static void clcdfb_disable(struct clcd_fb *fb)
+{
+ u32 val;
+
+ if (fb->board->disable)
+ fb->board->disable(fb);
+
+ if (fb->panel->backlight) {
+ fb->panel->backlight->props.power = FB_BLANK_POWERDOWN;
+ backlight_update_status(fb->panel->backlight);
+ }
+
+ val = readl(fb->regs + fb->off_cntl);
+ if (val & CNTL_LCDPWR) {
+ val &= ~CNTL_LCDPWR;
+ writel(val, fb->regs + fb->off_cntl);
+
+ clcdfb_sleep(20);
+ }
+ if (val & CNTL_LCDEN) {
+ val &= ~CNTL_LCDEN;
+ writel(val, fb->regs + fb->off_cntl);
+ }
+
+ /*
+ * Disable CLCD clock source.
+ */
+ if (fb->clk_enabled) {
+ fb->clk_enabled = false;
+ clk_disable(fb->clk);
+ }
+}
+
+static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
+{
+ /*
+ * Enable the CLCD clock source.
+ */
+ if (!fb->clk_enabled) {
+ fb->clk_enabled = true;
+ clk_enable(fb->clk);
+ }
+
+ /*
+ * Bring up by first enabling..
+ */
+ cntl |= CNTL_LCDEN;
+ writel(cntl, fb->regs + fb->off_cntl);
+
+ clcdfb_sleep(20);
+
+ /*
+ * and now apply power.
+ */
+ cntl |= CNTL_LCDPWR;
+ writel(cntl, fb->regs + fb->off_cntl);
+
+ /*
+ * Turn on backlight
+ */
+ if (fb->panel->backlight) {
+ fb->panel->backlight->props.power = FB_BLANK_UNBLANK;
+ backlight_update_status(fb->panel->backlight);
+ }
+
+ /*
+ * finally, enable the interface.
+ */
+ if (fb->board->enable)
+ fb->board->enable(fb);
+}
+
+static int
+clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+ u32 caps;
+ int ret = 0;
+
+ if (fb->panel->caps && fb->board->caps)
+ caps = fb->panel->caps & fb->board->caps;
+ else {
+ /* Old way of specifying what can be used */
+ caps = fb->panel->cntl & CNTL_BGR ?
+ CLCD_CAP_BGR : CLCD_CAP_RGB;
+ /* But mask out 444 modes as they weren't supported */
+ caps &= ~CLCD_CAP_444;
+ }
+
+ /* Only TFT panels can do RGB888/BGR888 */
+ if (!(fb->panel->cntl & CNTL_LCDTFT))
+ caps &= ~CLCD_CAP_888;
+
+ memset(&var->transp, 0, sizeof(var->transp));
+
+ var->red.msb_right = 0;
+ var->green.msb_right = 0;
+ var->blue.msb_right = 0;
+
+ switch (var->bits_per_pixel) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ /* If we can't do 5551, reject */
+ caps &= CLCD_CAP_5551;
+ if (!caps) {
+ ret = -EINVAL;
+ break;
+ }
+
+ var->red.length = var->bits_per_pixel;
+ var->red.offset = 0;
+ var->green.length = var->bits_per_pixel;
+ var->green.offset = 0;
+ var->blue.length = var->bits_per_pixel;
+ var->blue.offset = 0;
+ break;
+
+ case 16:
+ /* If we can't do 444, 5551 or 565, reject */
+ if (!(caps & (CLCD_CAP_444 | CLCD_CAP_5551 | CLCD_CAP_565))) {
+ ret = -EINVAL;
+ break;
+ }
+
+ /*
+ * Green length can be 4, 5 or 6 depending whether
+ * we're operating in 444, 5551 or 565 mode.
+ */
+ if (var->green.length == 4 && caps & CLCD_CAP_444)
+ caps &= CLCD_CAP_444;
+ if (var->green.length == 5 && caps & CLCD_CAP_5551)
+ caps &= CLCD_CAP_5551;
+ else if (var->green.length == 6 && caps & CLCD_CAP_565)
+ caps &= CLCD_CAP_565;
+ else {
+ /*
+ * PL110 officially only supports RGB555,
+ * but may be wired up to allow RGB565.
+ */
+ if (caps & CLCD_CAP_565) {
+ var->green.length = 6;
+ caps &= CLCD_CAP_565;
+ } else if (caps & CLCD_CAP_5551) {
+ var->green.length = 5;
+ caps &= CLCD_CAP_5551;
+ } else {
+ var->green.length = 4;
+ caps &= CLCD_CAP_444;
+ }
+ }
+
+ if (var->green.length >= 5) {
+ var->red.length = 5;
+ var->blue.length = 5;
+ } else {
+ var->red.length = 4;
+ var->blue.length = 4;
+ }
+ break;
+ case 32:
+ /* If we can't do 888, reject */
+ caps &= CLCD_CAP_888;
+ if (!caps) {
+ ret = -EINVAL;
+ break;
+ }
+
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+
+ /*
+ * >= 16bpp displays have separate colour component bitfields
+ * encoded in the pixel data. Calculate their position from
+ * the bitfield length defined above.
+ */
+ if (ret == 0 && var->bits_per_pixel >= 16) {
+ bool bgr, rgb;
+
+ bgr = caps & CLCD_CAP_BGR && var->blue.offset == 0;
+ rgb = caps & CLCD_CAP_RGB && var->red.offset == 0;
+
+ if (!bgr && !rgb)
+ /*
+ * The requested format was not possible, try just
+ * our capabilities. One of BGR or RGB must be
+ * supported.
+ */
+ bgr = caps & CLCD_CAP_BGR;
+
+ if (bgr) {
+ var->blue.offset = 0;
+ var->green.offset = var->blue.offset + var->blue.length;
+ var->red.offset = var->green.offset + var->green.length;
+ } else {
+ var->red.offset = 0;
+ var->green.offset = var->red.offset + var->red.length;
+ var->blue.offset = var->green.offset + var->green.length;
+ }
+ }
+
+ return ret;
+}
+
+static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct clcd_fb *fb = to_clcd(info);
+ int ret = -EINVAL;
+
+ if (fb->board->check)
+ ret = fb->board->check(fb, var);
+
+ if (ret == 0 &&
+ var->xres_virtual * var->bits_per_pixel / 8 *
+ var->yres_virtual > fb->fb.fix.smem_len)
+ ret = -EINVAL;
+
+ if (ret == 0)
+ ret = clcdfb_set_bitfields(fb, var);
+
+ return ret;
+}
+
+static int clcdfb_set_par(struct fb_info *info)
+{
+ struct clcd_fb *fb = to_clcd(info);
+ struct clcd_regs regs;
+
+ fb->fb.fix.line_length = fb->fb.var.xres_virtual *
+ fb->fb.var.bits_per_pixel / 8;
+
+ if (fb->fb.var.bits_per_pixel <= 8)
+ fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+
+ fb->board->decode(fb, &regs);
+
+ clcdfb_disable(fb);
+
+ writel(regs.tim0, fb->regs + CLCD_TIM0);
+ writel(regs.tim1, fb->regs + CLCD_TIM1);
+ writel(regs.tim2, fb->regs + CLCD_TIM2);
+ writel(regs.tim3, fb->regs + CLCD_TIM3);
+
+ clcdfb_set_start(fb);
+
+ clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
+
+ fb->clcd_cntl = regs.cntl;
+
+ clcdfb_enable(fb, regs.cntl);
+
+#ifdef DEBUG
+ printk(KERN_INFO
+ "CLCD: Registers set to\n"
+ " %08x %08x %08x %08x\n"
+ " %08x %08x %08x %08x\n",
+ readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
+ readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
+ readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
+ readl(fb->regs + fb->off_ienb), readl(fb->regs + fb->off_cntl));
+#endif
+
+ return 0;
+}
+
+static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
+{
+ unsigned int mask = (1 << bf->length) - 1;
+
+ return (val >> (16 - bf->length) & mask) << bf->offset;
+}
+
+/*
+ * Set a single color register. The values supplied have a 16 bit
+ * magnitude. Return != 0 for invalid regno.
+ */
+static int
+clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+ unsigned int blue, unsigned int transp, struct fb_info *info)
+{
+ struct clcd_fb *fb = to_clcd(info);
+
+ if (regno < 16)
+ fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
+ convert_bitfield(blue, &fb->fb.var.blue) |
+ convert_bitfield(green, &fb->fb.var.green) |
+ convert_bitfield(red, &fb->fb.var.red);
+
+ if (fb->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR && regno < 256) {
+ int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
+ u32 val, mask, newval;
+
+ newval = (red >> 11) & 0x001f;
+ newval |= (green >> 6) & 0x03e0;
+ newval |= (blue >> 1) & 0x7c00;
+
+ /*
+ * 3.2.11: if we're configured for big endian
+ * byte order, the palette entries are swapped.
+ */
+ if (fb->clcd_cntl & CNTL_BEBO)
+ regno ^= 1;
+
+ if (regno & 1) {
+ newval <<= 16;
+ mask = 0x0000ffff;
+ } else {
+ mask = 0xffff0000;
+ }
+
+ val = readl(fb->regs + hw_reg) & mask;
+ writel(val | newval, fb->regs + hw_reg);
+ }
+
+ return regno > 255;
+}
+
+/*
+ * Blank the screen if blank_mode != 0, else unblank. If blank == NULL
+ * then the caller blanks by setting the CLUT (Color Look Up Table) to all
+ * black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
+ * to e.g. a video mode which doesn't support it. Implements VESA suspend
+ * and powerdown modes on hardware that supports disabling hsync/vsync:
+ * blank_mode == 2: suspend vsync
+ * blank_mode == 3: suspend hsync
+ * blank_mode == 4: powerdown
+ */
+static int clcdfb_blank(int blank_mode, struct fb_info *info)
+{
+ struct clcd_fb *fb = to_clcd(info);
+
+ if (blank_mode != 0) {
+ clcdfb_disable(fb);
+ } else {
+ clcdfb_enable(fb, fb->clcd_cntl);
+ }
+ return 0;
+}
+
+static int clcdfb_mmap(struct fb_info *info,
+ struct vm_area_struct *vma)
+{
+ struct clcd_fb *fb = to_clcd(info);
+ unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
+ int ret = -EINVAL;
+
+ len = info->fix.smem_len;
+
+ if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
+ fb->board->mmap)
+ ret = fb->board->mmap(fb, vma);
+
+ return ret;
+}
+
+static const struct fb_ops clcdfb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = clcdfb_check_var,
+ .fb_set_par = clcdfb_set_par,
+ .fb_setcolreg = clcdfb_setcolreg,
+ .fb_blank = clcdfb_blank,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_mmap = clcdfb_mmap,
+};
+
+static int clcdfb_register(struct clcd_fb *fb)
+{
+ int ret;
+
+ /*
+ * ARM PL111 always has IENB at 0x1c; it's only PL110
+ * which is reversed on some platforms.
+ */
+ if (amba_manf(fb->dev) == 0x41 && amba_part(fb->dev) == 0x111) {
+ fb->off_ienb = CLCD_PL111_IENB;
+ fb->off_cntl = CLCD_PL111_CNTL;
+ } else {
+ fb->off_ienb = CLCD_PL110_IENB;
+ fb->off_cntl = CLCD_PL110_CNTL;
+ }
+
+ fb->clk = clk_get(&fb->dev->dev, NULL);
+ if (IS_ERR(fb->clk)) {
+ ret = PTR_ERR(fb->clk);
+ goto out;
+ }
+
+ ret = clk_prepare(fb->clk);
+ if (ret)
+ goto free_clk;
+
+ fb->fb.device = &fb->dev->dev;
+
+ fb->fb.fix.mmio_start = fb->dev->res.start;
+ fb->fb.fix.mmio_len = resource_size(&fb->dev->res);
+
+ fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
+ if (!fb->regs) {
+ printk(KERN_ERR "CLCD: unable to remap registers\n");
+ ret = -ENOMEM;
+ goto clk_unprep;
+ }
+
+ fb->fb.fbops = &clcdfb_ops;
+ fb->fb.flags = FBINFO_FLAG_DEFAULT;
+ fb->fb.pseudo_palette = fb->cmap;
+
+ strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
+ fb->fb.fix.type = FB_TYPE_PACKED_PIXELS;
+ fb->fb.fix.type_aux = 0;
+ fb->fb.fix.xpanstep = 0;
+ fb->fb.fix.ypanstep = 0;
+ fb->fb.fix.ywrapstep = 0;
+ fb->fb.fix.accel = FB_ACCEL_NONE;
+
+ fb->fb.var.xres = fb->panel->mode.xres;
+ fb->fb.var.yres = fb->panel->mode.yres;
+ fb->fb.var.xres_virtual = fb->panel->mode.xres;
+ fb->fb.var.yres_virtual = fb->panel->mode.yres;
+ fb->fb.var.bits_per_pixel = fb->panel->bpp;
+ fb->fb.var.grayscale = fb->panel->grayscale;
+ fb->fb.var.pixclock = fb->panel->mode.pixclock;
+ fb->fb.var.left_margin = fb->panel->mode.left_margin;
+ fb->fb.var.right_margin = fb->panel->mode.right_margin;
+ fb->fb.var.upper_margin = fb->panel->mode.upper_margin;
+ fb->fb.var.lower_margin = fb->panel->mode.lower_margin;
+ fb->fb.var.hsync_len = fb->panel->mode.hsync_len;
+ fb->fb.var.vsync_len = fb->panel->mode.vsync_len;
+ fb->fb.var.sync = fb->panel->mode.sync;
+ fb->fb.var.vmode = fb->panel->mode.vmode;
+ fb->fb.var.activate = FB_ACTIVATE_NOW;
+ fb->fb.var.nonstd = 0;
+ fb->fb.var.height = fb->panel->height;
+ fb->fb.var.width = fb->panel->width;
+ fb->fb.var.accel_flags = 0;
+
+ fb->fb.monspecs.hfmin = 0;
+ fb->fb.monspecs.hfmax = 100000;
+ fb->fb.monspecs.vfmin = 0;
+ fb->fb.monspecs.vfmax = 400;
+ fb->fb.monspecs.dclkmin = 1000000;
+ fb->fb.monspecs.dclkmax = 100000000;
+
+ /*
+ * Make sure that the bitfields are set appropriately.
+ */
+ clcdfb_set_bitfields(fb, &fb->fb.var);
+
+ /*
+ * Allocate colourmap.
+ */
+ ret = fb_alloc_cmap(&fb->fb.cmap, 256, 0);
+ if (ret)
+ goto unmap;
+
+ /*
+ * Ensure interrupts are disabled.
+ */
+ writel(0, fb->regs + fb->off_ienb);
+
+ fb_set_var(&fb->fb, &fb->fb.var);
+
+ dev_info(&fb->dev->dev, "%s hardware, %s display\n",
+ fb->board->name, fb->panel->mode.name);
+
+ ret = register_framebuffer(&fb->fb);
+ if (ret == 0)
+ goto out;
+
+ printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
+
+ fb_dealloc_cmap(&fb->fb.cmap);
+ unmap:
+ iounmap(fb->regs);
+ clk_unprep:
+ clk_unprepare(fb->clk);
+ free_clk:
+ clk_put(fb->clk);
+ out:
+ return ret;
+}
+
+#ifdef CONFIG_OF
+static int clcdfb_of_get_dpi_panel_mode(struct device_node *node,
+ struct clcd_panel *clcd_panel)
+{
+ int err;
+ struct display_timing timing;
+ struct videomode video;
+
+ err = of_get_display_timing(node, "panel-timing", &timing);
+ if (err) {
+ pr_err("%pOF: problems parsing panel-timing (%d)\n", node, err);
+ return err;
+ }
+
+ videomode_from_timing(&timing, &video);
+
+ err = fb_videomode_from_videomode(&video, &clcd_panel->mode);
+ if (err)
+ return err;
+
+ /* Set up some inversion flags */
+ if (timing.flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
+ clcd_panel->tim2 |= TIM2_IPC;
+ else if (!(timing.flags & DISPLAY_FLAGS_PIXDATA_POSEDGE))
+ /*
+ * To preserve backwards compatibility, the IPC (inverted
+ * pixel clock) flag needs to be set on any display that
+ * doesn't explicitly specify that the pixel clock is
+ * active on the negative or positive edge.
+ */
+ clcd_panel->tim2 |= TIM2_IPC;
+
+ if (timing.flags & DISPLAY_FLAGS_HSYNC_LOW)
+ clcd_panel->tim2 |= TIM2_IHS;
+
+ if (timing.flags & DISPLAY_FLAGS_VSYNC_LOW)
+ clcd_panel->tim2 |= TIM2_IVS;
+
+ if (timing.flags & DISPLAY_FLAGS_DE_LOW)
+ clcd_panel->tim2 |= TIM2_IOE;
+
+ return 0;
+}
+
+static int clcdfb_snprintf_mode(char *buf, int size, struct fb_videomode *mode)
+{
+ return snprintf(buf, size, "%ux%u@%u", mode->xres, mode->yres,
+ mode->refresh);
+}
+
+static int clcdfb_of_get_backlight(struct device *dev,
+ struct clcd_panel *clcd_panel)
+{
+ struct backlight_device *backlight;
+
+ /* Look up the optional backlight device */
+ backlight = devm_of_find_backlight(dev);
+ if (IS_ERR(backlight))
+ return PTR_ERR(backlight);
+
+ clcd_panel->backlight = backlight;
+ return 0;
+}
+
+static int clcdfb_of_get_mode(struct device *dev, struct device_node *panel,
+ struct clcd_panel *clcd_panel)
+{
+ int err;
+ struct fb_videomode *mode;
+ char *name;
+ int len;
+
+ /* Only directly connected DPI panels supported for now */
+ if (of_device_is_compatible(panel, "panel-dpi"))
+ err = clcdfb_of_get_dpi_panel_mode(panel, clcd_panel);
+ else
+ err = -ENOENT;
+ if (err)
+ return err;
+ mode = &clcd_panel->mode;
+
+ len = clcdfb_snprintf_mode(NULL, 0, mode);
+ name = devm_kzalloc(dev, len + 1, GFP_KERNEL);
+ if (!name)
+ return -ENOMEM;
+
+ clcdfb_snprintf_mode(name, len + 1, mode);
+ mode->name = name;
+
+ return 0;
+}
+
+static int clcdfb_of_init_tft_panel(struct clcd_fb *fb, u32 r0, u32 g0, u32 b0)
+{
+ static struct {
+ unsigned int part;
+ u32 r0, g0, b0;
+ u32 caps;
+ } panels[] = {
+ { 0x110, 1, 7, 13, CLCD_CAP_5551 },
+ { 0x110, 0, 8, 16, CLCD_CAP_888 },
+ { 0x110, 16, 8, 0, CLCD_CAP_888 },
+ { 0x111, 4, 14, 20, CLCD_CAP_444 },
+ { 0x111, 3, 11, 19, CLCD_CAP_444 | CLCD_CAP_5551 },
+ { 0x111, 3, 10, 19, CLCD_CAP_444 | CLCD_CAP_5551 |
+ CLCD_CAP_565 },
+ { 0x111, 0, 8, 16, CLCD_CAP_444 | CLCD_CAP_5551 |
+ CLCD_CAP_565 | CLCD_CAP_888 },
+ };
+ int i;
+
+ /* Bypass pixel clock divider */
+ fb->panel->tim2 |= TIM2_BCD;
+
+ /* TFT display, vert. comp. interrupt at the start of the back porch */
+ fb->panel->cntl |= CNTL_LCDTFT | CNTL_LCDVCOMP(1);
+
+ fb->panel->caps = 0;
+
+ /* Match the setup with known variants */
+ for (i = 0; i < ARRAY_SIZE(panels) && !fb->panel->caps; i++) {
+ if (amba_part(fb->dev) != panels[i].part)
+ continue;
+ if (g0 != panels[i].g0)
+ continue;
+ if (r0 == panels[i].r0 && b0 == panels[i].b0)
+ fb->panel->caps = panels[i].caps;
+ }
+
+ /*
+ * If we actually physically connected the R lines to B and
+ * vice versa
+ */
+ if (r0 != 0 && b0 == 0)
+ fb->panel->bgr_connection = true;
+
+ return fb->panel->caps ? 0 : -EINVAL;
+}
+
+static int clcdfb_of_init_display(struct clcd_fb *fb)
+{
+ struct device_node *endpoint, *panel;
+ int err;
+ unsigned int bpp;
+ u32 max_bandwidth;
+ u32 tft_r0b0g0[3];
+
+ fb->panel = devm_kzalloc(&fb->dev->dev, sizeof(*fb->panel), GFP_KERNEL);
+ if (!fb->panel)
+ return -ENOMEM;
+
+ /*
+ * Fetch the panel endpoint.
+ */
+ endpoint = of_graph_get_next_endpoint(fb->dev->dev.of_node, NULL);
+ if (!endpoint)
+ return -ENODEV;
+
+ panel = of_graph_get_remote_port_parent(endpoint);
+ if (!panel)
+ return -ENODEV;
+
+ err = clcdfb_of_get_backlight(&fb->dev->dev, fb->panel);
+ if (err)
+ return err;
+
+ err = clcdfb_of_get_mode(&fb->dev->dev, panel, fb->panel);
+ if (err)
+ return err;
+
+ err = of_property_read_u32(fb->dev->dev.of_node, "max-memory-bandwidth",
+ &max_bandwidth);
+ if (!err) {
+ /*
+ * max_bandwidth is in bytes per second and pixclock in
+ * pico-seconds, so the maximum allowed bits per pixel is
+ * 8 * max_bandwidth / (PICOS2KHZ(pixclock) * 1000)
+ * Rearrange this calculation to avoid overflow and then ensure
+ * result is a valid format.
+ */
+ bpp = max_bandwidth / (1000 / 8)
+ / PICOS2KHZ(fb->panel->mode.pixclock);
+ bpp = rounddown_pow_of_two(bpp);
+ if (bpp > 32)
+ bpp = 32;
+ } else
+ bpp = 32;
+ fb->panel->bpp = bpp;
+
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ fb->panel->cntl |= CNTL_BEBO;
+#endif
+ fb->panel->width = -1;
+ fb->panel->height = -1;
+
+ if (of_property_read_u32_array(endpoint,
+ "arm,pl11x,tft-r0g0b0-pads",
+ tft_r0b0g0, ARRAY_SIZE(tft_r0b0g0)) != 0)
+ return -ENOENT;
+
+ return clcdfb_of_init_tft_panel(fb, tft_r0b0g0[0],
+ tft_r0b0g0[1], tft_r0b0g0[2]);
+}
+
+static int clcdfb_of_vram_setup(struct clcd_fb *fb)
+{
+ int err;
+ struct device_node *memory;
+ u64 size;
+
+ err = clcdfb_of_init_display(fb);
+ if (err)
+ return err;
+
+ memory = of_parse_phandle(fb->dev->dev.of_node, "memory-region", 0);
+ if (!memory)
+ return -ENODEV;
+
+ fb->fb.screen_base = of_iomap(memory, 0);
+ if (!fb->fb.screen_base)
+ return -ENOMEM;
+
+ fb->fb.fix.smem_start = of_translate_address(memory,
+ of_get_address(memory, 0, &size, NULL));
+ fb->fb.fix.smem_len = size;
+
+ return 0;
+}
+
+static int clcdfb_of_vram_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ unsigned long off, user_size, kernel_size;
+
+
+ off = vma->vm_pgoff << PAGE_SHIFT;
+ user_size = vma->vm_end - vma->vm_start;
+ kernel_size = fb->fb.fix.smem_len;
+
+ if (off >= kernel_size || user_size > (kernel_size - off))
+ return -ENXIO;
+
+ return remap_pfn_range(vma, vma->vm_start,
+ __phys_to_pfn(fb->fb.fix.smem_start) + vma->vm_pgoff,
+ user_size,
+ pgprot_writecombine(vma->vm_page_prot));
+}
+
+static void clcdfb_of_vram_remove(struct clcd_fb *fb)
+{
+ iounmap(fb->fb.screen_base);
+}
+
+static int clcdfb_of_dma_setup(struct clcd_fb *fb)
+{
+ unsigned long framesize;
+ dma_addr_t dma;
+ int err;
+
+ err = clcdfb_of_init_display(fb);
+ if (err)
+ return err;
+
+ framesize = PAGE_ALIGN(fb->panel->mode.xres * fb->panel->mode.yres *
+ fb->panel->bpp / 8);
+ fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
+ &dma, GFP_KERNEL);
+ if (!fb->fb.screen_base)
+ return -ENOMEM;
+
+ fb->fb.fix.smem_start = dma;
+ fb->fb.fix.smem_len = framesize;
+
+ return 0;
+}
+
+static int clcdfb_of_dma_mmap(struct clcd_fb *fb, struct vm_area_struct *vma)
+{
+ return dma_mmap_wc(&fb->dev->dev, vma, fb->fb.screen_base,
+ fb->fb.fix.smem_start, fb->fb.fix.smem_len);
+}
+
+static void clcdfb_of_dma_remove(struct clcd_fb *fb)
+{
+ dma_free_coherent(&fb->dev->dev, fb->fb.fix.smem_len,
+ fb->fb.screen_base, fb->fb.fix.smem_start);
+}
+
+static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
+{
+ struct clcd_board *board = devm_kzalloc(&dev->dev, sizeof(*board),
+ GFP_KERNEL);
+ struct device_node *node = dev->dev.of_node;
+
+ if (!board)
+ return NULL;
+
+ board->name = of_node_full_name(node);
+ board->caps = CLCD_CAP_ALL;
+ board->check = clcdfb_check;
+ board->decode = clcdfb_decode;
+ if (of_find_property(node, "memory-region", NULL)) {
+ board->setup = clcdfb_of_vram_setup;
+ board->mmap = clcdfb_of_vram_mmap;
+ board->remove = clcdfb_of_vram_remove;
+ } else {
+ board->setup = clcdfb_of_dma_setup;
+ board->mmap = clcdfb_of_dma_mmap;
+ board->remove = clcdfb_of_dma_remove;
+ }
+
+ return board;
+}
+#else
+static struct clcd_board *clcdfb_of_get_board(struct amba_device *dev)
+{
+ return NULL;
+}
+#endif
+
+static int clcdfb_probe(struct amba_device *dev, const struct amba_id *id)
+{
+ struct clcd_board *board = dev_get_platdata(&dev->dev);
+ struct clcd_fb *fb;
+ int ret;
+
+ if (!board)
+ board = clcdfb_of_get_board(dev);
+
+ if (!board)
+ return -EINVAL;
+
+ ret = dma_set_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ goto out;
+
+ ret = amba_request_regions(dev, NULL);
+ if (ret) {
+ printk(KERN_ERR "CLCD: unable to reserve regs region\n");
+ goto out;
+ }
+
+ fb = kzalloc(sizeof(*fb), GFP_KERNEL);
+ if (!fb) {
+ ret = -ENOMEM;
+ goto free_region;
+ }
+
+ fb->dev = dev;
+ fb->board = board;
+
+ dev_info(&fb->dev->dev, "PL%03x designer %02x rev%u at 0x%08llx\n",
+ amba_part(dev), amba_manf(dev), amba_rev(dev),
+ (unsigned long long)dev->res.start);
+
+ ret = fb->board->setup(fb);
+ if (ret)
+ goto free_fb;
+
+ ret = clcdfb_register(fb);
+ if (ret == 0) {
+ amba_set_drvdata(dev, fb);
+ goto out;
+ }
+
+ fb->board->remove(fb);
+ free_fb:
+ kfree(fb);
+ free_region:
+ amba_release_regions(dev);
+ out:
+ return ret;
+}
+
+static int clcdfb_remove(struct amba_device *dev)
+{
+ struct clcd_fb *fb = amba_get_drvdata(dev);
+
+ clcdfb_disable(fb);
+ unregister_framebuffer(&fb->fb);
+ if (fb->fb.cmap.len)
+ fb_dealloc_cmap(&fb->fb.cmap);
+ iounmap(fb->regs);
+ clk_unprepare(fb->clk);
+ clk_put(fb->clk);
+
+ fb->board->remove(fb);
+
+ kfree(fb);
+
+ amba_release_regions(dev);
+
+ return 0;
+}
+
+static const struct amba_id clcdfb_id_table[] = {
+ {
+ .id = 0x00041110,
+ .mask = 0x000ffffe,
+ },
+ { 0, 0 },
+};
+
+MODULE_DEVICE_TABLE(amba, clcdfb_id_table);
+
+static struct amba_driver clcd_driver = {
+ .drv = {
+ .name = "clcd-pl11x",
+ },
+ .probe = clcdfb_probe,
+ .remove = clcdfb_remove,
+ .id_table = clcdfb_id_table,
+};
+
+static int __init amba_clcdfb_init(void)
+{
+ if (fb_get_options("ambafb", NULL))
+ return -ENODEV;
+
+ return amba_driver_register(&clcd_driver);
+}
+
+module_init(amba_clcdfb_init);
+
+static void __exit amba_clcdfb_exit(void)
+{
+ amba_driver_unregister(&clcd_driver);
+}
+
+module_exit(amba_clcdfb_exit);
+
+MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/fbdev/core/fbcon.c b/drivers/video/fbdev/core/fbcon.c
index 41f3fa3db6d4..8c7bd0a29eaa 100644
--- a/drivers/video/fbdev/core/fbcon.c
+++ b/drivers/video/fbdev/core/fbcon.c
@@ -2299,6 +2299,9 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
if (font->width <= 8) {
j = vc->vc_font.height;
+ if (font->charcount * j > FNTSIZE(fontdata))
+ return -EINVAL;
+
for (i = 0; i < font->charcount; i++) {
memcpy(data, fontdata, j);
memset(data + j, 0, 32 - j);
@@ -2307,6 +2310,9 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
}
} else if (font->width <= 16) {
j = vc->vc_font.height * 2;
+ if (font->charcount * j > FNTSIZE(fontdata))
+ return -EINVAL;
+
for (i = 0; i < font->charcount; i++) {
memcpy(data, fontdata, j);
memset(data + j, 0, 64 - j);
@@ -2314,6 +2320,9 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
fontdata += j;
}
} else if (font->width <= 24) {
+ if (font->charcount * (vc->vc_font.height * sizeof(u32)) > FNTSIZE(fontdata))
+ return -EINVAL;
+
for (i = 0; i < font->charcount; i++) {
for (j = 0; j < vc->vc_font.height; j++) {
*data++ = fontdata[0];
@@ -2326,6 +2335,9 @@ static int fbcon_get_font(struct vc_data *vc, struct console_font *font)
}
} else {
j = vc->vc_font.height * 4;
+ if (font->charcount * j > FNTSIZE(fontdata))
+ return -EINVAL;
+
for (i = 0; i < font->charcount; i++) {
memcpy(data, fontdata, j);
memset(data + j, 0, 128 - j);
diff --git a/drivers/video/fbdev/core/fbcon.h b/drivers/video/fbdev/core/fbcon.h
index 78bb14c03643..9315b360c898 100644
--- a/drivers/video/fbdev/core/fbcon.h
+++ b/drivers/video/fbdev/core/fbcon.h
@@ -152,13 +152,6 @@ static inline int attr_col_ec(int shift, struct vc_data *vc,
#define attr_bgcol_ec(bgshift, vc, info) attr_col_ec(bgshift, vc, info, 0)
#define attr_fgcol_ec(fgshift, vc, info) attr_col_ec(fgshift, vc, info, 1)
-/* Font */
-#define REFCOUNT(fd) (((int *)(fd))[-1])
-#define FNTSIZE(fd) (((int *)(fd))[-2])
-#define FNTCHARCNT(fd) (((int *)(fd))[-3])
-#define FNTSUM(fd) (((int *)(fd))[-4])
-#define FONT_EXTRA_WORDS 4
-
/*
* Scroll Method
*/
diff --git a/drivers/video/fbdev/core/fbcon_rotate.c b/drivers/video/fbdev/core/fbcon_rotate.c
index c0d445294aa7..ac72d4f85f7d 100644
--- a/drivers/video/fbdev/core/fbcon_rotate.c
+++ b/drivers/video/fbdev/core/fbcon_rotate.c
@@ -14,6 +14,7 @@
#include <linux/fb.h>
#include <linux/vt_kern.h>
#include <linux/console.h>
+#include <linux/font.h>
#include <asm/types.h>
#include "fbcon.h"
#include "fbcon_rotate.h"
diff --git a/drivers/video/fbdev/core/tileblit.c b/drivers/video/fbdev/core/tileblit.c
index 31b85b71cc37..628fe5e010c0 100644
--- a/drivers/video/fbdev/core/tileblit.c
+++ b/drivers/video/fbdev/core/tileblit.c
@@ -13,6 +13,7 @@
#include <linux/fb.h>
#include <linux/vt_kern.h>
#include <linux/console.h>
+#include <linux/font.h>
#include <asm/types.h>
#include "fbcon.h"