summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/phy/broadcom.c2
-rw-r--r--drivers/net/phy/dp83822.c3
-rw-r--r--drivers/net/phy/dp83869.c4
-rw-r--r--drivers/net/phy/lxt.c1
-rw-r--r--drivers/net/phy/marvell.c1
-rw-r--r--drivers/net/phy/marvell10g.c2
-rw-r--r--drivers/net/phy/micrel.c14
-rw-r--r--drivers/net/phy/phy.c2
-rw-r--r--drivers/net/phy/phy_device.c9
9 files changed, 34 insertions, 4 deletions
diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c
index 3142ba768313..0472b3470c59 100644
--- a/drivers/net/phy/broadcom.c
+++ b/drivers/net/phy/broadcom.c
@@ -410,6 +410,8 @@ static int bcm54616s_probe(struct phy_device *phydev)
*/
if (!(val & BCM54616S_100FX_MODE))
phydev->dev_flags |= PHY_BCM_FLAGS_MODE_1000BX;
+
+ phydev->port = PORT_FIBRE;
}
return 0;
diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index fff371ca1086..be1224b4447b 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -554,6 +554,9 @@ static int dp83822_probe(struct phy_device *phydev)
dp83822_of_init(phydev);
+ if (dp83822->fx_enabled)
+ phydev->port = PORT_FIBRE;
+
return 0;
}
diff --git a/drivers/net/phy/dp83869.c b/drivers/net/phy/dp83869.c
index b30bc142d82e..755220c6451f 100644
--- a/drivers/net/phy/dp83869.c
+++ b/drivers/net/phy/dp83869.c
@@ -855,6 +855,10 @@ static int dp83869_probe(struct phy_device *phydev)
if (ret)
return ret;
+ if (dp83869->mode == DP83869_RGMII_100_BASE ||
+ dp83869->mode == DP83869_RGMII_1000_BASE)
+ phydev->port = PORT_FIBRE;
+
return dp83869_config_init(phydev);
}
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
index 0ee23d29c0d4..bde3356a2f86 100644
--- a/drivers/net/phy/lxt.c
+++ b/drivers/net/phy/lxt.c
@@ -292,6 +292,7 @@ static int lxt973_probe(struct phy_device *phydev)
phy_write(phydev, MII_BMCR, val);
/* Remember that the port is in fiber mode. */
phydev->priv = lxt973_probe;
+ phydev->port = PORT_FIBRE;
} else {
phydev->priv = NULL;
}
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
index b523aa37ebf0..3238d0fbf437 100644
--- a/drivers/net/phy/marvell.c
+++ b/drivers/net/phy/marvell.c
@@ -1552,6 +1552,7 @@ static int marvell_read_status_page(struct phy_device *phydev, int page)
phydev->asym_pause = 0;
phydev->speed = SPEED_UNKNOWN;
phydev->duplex = DUPLEX_UNKNOWN;
+ phydev->port = fiber ? PORT_FIBRE : PORT_TP;
if (phydev->autoneg == AUTONEG_ENABLE)
err = marvell_read_status_page_an(phydev, fiber, status);
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 1901ba277413..b1bb9b8e1e4e 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -631,6 +631,7 @@ static int mv3310_read_status_10gbaser(struct phy_device *phydev)
phydev->link = 1;
phydev->speed = SPEED_10000;
phydev->duplex = DUPLEX_FULL;
+ phydev->port = PORT_FIBRE;
return 0;
}
@@ -690,6 +691,7 @@ static int mv3310_read_status_copper(struct phy_device *phydev)
phydev->duplex = cssr1 & MV_PCS_CSSR1_DUPLEX_FULL ?
DUPLEX_FULL : DUPLEX_HALF;
+ phydev->port = PORT_TP;
phydev->mdix = cssr1 & MV_PCS_CSSR1_MDIX ?
ETH_TP_MDI_X : ETH_TP_MDI;
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 494abf608b8f..7ec6f70d6a82 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -341,14 +341,19 @@ static int kszphy_config_init(struct phy_device *phydev)
return kszphy_config_reset(phydev);
}
+static int ksz8041_fiber_mode(struct phy_device *phydev)
+{
+ struct device_node *of_node = phydev->mdio.dev.of_node;
+
+ return of_property_read_bool(of_node, "micrel,fiber-mode");
+}
+
static int ksz8041_config_init(struct phy_device *phydev)
{
__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
- struct device_node *of_node = phydev->mdio.dev.of_node;
-
/* Limit supported and advertised modes in fiber mode */
- if (of_property_read_bool(of_node, "micrel,fiber-mode")) {
+ if (ksz8041_fiber_mode(phydev)) {
phydev->dev_flags |= MICREL_PHY_FXEN;
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, mask);
linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, mask);
@@ -1176,6 +1181,9 @@ static int kszphy_probe(struct phy_device *phydev)
}
}
+ if (ksz8041_fiber_mode(phydev))
+ phydev->port = PORT_FIBRE;
+
/* Support legacy board-file configuration */
if (phydev->dev_flags & MICREL_PHY_50MHZ_CLK) {
priv->rmii_ref_clk_sel = true;
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 9cb7e4dbf8f4..fdb914b5b857 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -308,7 +308,7 @@ void phy_ethtool_ksettings_get(struct phy_device *phydev,
if (phydev->interface == PHY_INTERFACE_MODE_MOCA)
cmd->base.port = PORT_BNC;
else
- cmd->base.port = PORT_MII;
+ cmd->base.port = phydev->port;
cmd->base.transceiver = phy_is_internal(phydev) ?
XCVR_INTERNAL : XCVR_EXTERNAL;
cmd->base.phy_address = phydev->mdio.addr;
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 8447e56ba572..30a20a29ae05 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -606,6 +606,7 @@ struct phy_device *phy_device_create(struct mii_bus *bus, int addr, u32 phy_id,
dev->pause = 0;
dev->asym_pause = 0;
dev->link = 0;
+ dev->port = PORT_TP;
dev->interface = PHY_INTERFACE_MODE_GMII;
dev->autoneg = AUTONEG_ENABLE;
@@ -1403,6 +1404,14 @@ int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
phydev->state = PHY_READY;
+ /* Port is set to PORT_TP by default and the actual PHY driver will set
+ * it to different value depending on the PHY configuration. If we have
+ * the generic PHY driver we can't figure it out, thus set the old
+ * legacy PORT_MII value.
+ */
+ if (using_genphy)
+ phydev->port = PORT_MII;
+
/* Initial carrier state is off as the phy is about to be
* (re)initialized.
*/