summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/bcm47xxpart.c2
-rw-r--r--drivers/net/ethernet/broadcom/b44.c4
-rw-r--r--drivers/net/ethernet/broadcom/bgmac.c6
-rw-r--r--drivers/ssb/driver_chipcommon_pmu.c4
-rw-r--r--drivers/tty/serial/Kconfig10
5 files changed, 13 insertions, 13 deletions
diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c
index e06d782489a6..6a1180502cc1 100644
--- a/drivers/mtd/bcm47xxpart.c
+++ b/drivers/mtd/bcm47xxpart.c
@@ -14,7 +14,7 @@
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
/* 10 parts were found on sflash on Netgear WNDR4500 */
#define BCM47XXPART_MAX_PARTS 12
diff --git a/drivers/net/ethernet/broadcom/b44.c b/drivers/net/ethernet/broadcom/b44.c
index a7efec293037..9b017d9c58e9 100644
--- a/drivers/net/ethernet/broadcom/b44.c
+++ b/drivers/net/ethernet/broadcom/b44.c
@@ -381,7 +381,7 @@ static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
}
#ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
static void b44_wap54g10_workaround(struct b44 *bp)
{
char buf[20];
@@ -393,7 +393,7 @@ static void b44_wap54g10_workaround(struct b44 *bp)
* see https://dev.openwrt.org/ticket/146
* check and reset bit "isolate"
*/
- if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
+ if (bcm47xx_nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
return;
if (simple_strtoul(buf, NULL, 0) == 2) {
err = __b44_readphy(bp, 0, MII_BMCR, &val);
diff --git a/drivers/net/ethernet/broadcom/bgmac.c b/drivers/net/ethernet/broadcom/bgmac.c
index bf985c04524e..639049d7e92d 100644
--- a/drivers/net/ethernet/broadcom/bgmac.c
+++ b/drivers/net/ethernet/broadcom/bgmac.c
@@ -15,7 +15,7 @@
#include <linux/mii.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
static const struct bcma_device_id bgmac_bcma_tbl[] = {
BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_4706_MAC_GBIT, BCMA_ANY_REV, BCMA_ANY_CLASS),
@@ -908,7 +908,7 @@ static void bgmac_chip_reset(struct bgmac *bgmac)
BGMAC_CHIPCTL_1_IF_TYPE_RMII;
char buf[2];
- if (nvram_getenv("et_swtype", buf, 1) > 0) {
+ if (bcm47xx_nvram_getenv("et_swtype", buf, 1) > 0) {
if (kstrtou8(buf, 0, &et_swtype))
bgmac_err(bgmac, "Failed to parse et_swtype (%s)\n",
buf);
@@ -1386,7 +1386,7 @@ static int bgmac_probe(struct bcma_device *core)
}
bgmac->int_mask = BGMAC_IS_ERRMASK | BGMAC_IS_RX | BGMAC_IS_TX_MASK;
- if (nvram_getenv("et0_no_txint", NULL, 0) == 0)
+ if (bcm47xx_nvram_getenv("et0_no_txint", NULL, 0) == 0)
bgmac->int_mask &= ~BGMAC_IS_TX_MASK;
/* TODO: reset the external phy. Specs are needed */
diff --git a/drivers/ssb/driver_chipcommon_pmu.c b/drivers/ssb/driver_chipcommon_pmu.c
index a43415a7fbed..4c0f6d883dd3 100644
--- a/drivers/ssb/driver_chipcommon_pmu.c
+++ b/drivers/ssb/driver_chipcommon_pmu.c
@@ -14,7 +14,7 @@
#include <linux/delay.h>
#include <linux/export.h>
#ifdef CONFIG_BCM47XX
-#include <asm/mach-bcm47xx/nvram.h>
+#include <bcm47xx_nvram.h>
#endif
#include "ssb_private.h"
@@ -322,7 +322,7 @@ static void ssb_pmu_pll_init(struct ssb_chipcommon *cc)
if (bus->bustype == SSB_BUSTYPE_SSB) {
#ifdef CONFIG_BCM47XX
char buf[20];
- if (nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
+ if (bcm47xx_nvram_getenv("xtalfreq", buf, sizeof(buf)) >= 0)
crystalfreq = simple_strtoul(buf, NULL, 0);
#endif
}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index a0162cbf0557..cf9210db9fa9 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -729,19 +729,19 @@ config SERIAL_SH_SCI_DMA
config SERIAL_PNX8XXX
bool "Enable PNX8XXX SoCs' UART Support"
- depends on SOC_PNX8550 || SOC_PNX833X
+ depends on SOC_PNX833X
select SERIAL_CORE
help
- If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
- and you want to use serial ports, say Y. Otherwise, say N.
+ If you have a MIPS-based Philips SoC such as PNX8330 and you want
+ to use serial ports, say Y. Otherwise, say N.
config SERIAL_PNX8XXX_CONSOLE
bool "Enable PNX8XX0 serial console"
depends on SERIAL_PNX8XXX
select SERIAL_CORE_CONSOLE
help
- If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330
- and you want to use serial console, say Y. Otherwise, say N.
+ If you have a MIPS-based Philips SoC such as PNX8330 and you want
+ to use serial console, say Y. Otherwise, say N.
config SERIAL_HS_LPC32XX
tristate "LPC32XX high speed serial port support"