summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-etr.c13
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc.h9
2 files changed, 21 insertions, 1 deletions
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index 40ddcf11ae4c..68fbc8f7450e 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -22,7 +22,7 @@
static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
{
- u32 axictl;
+ u32 axictl, sts;
/* Zero out the memory to help with debug */
memset(drvdata->vaddr, 0, drvdata->size);
@@ -47,6 +47,17 @@ static void tmc_etr_enable_hw(struct tmc_drvdata *drvdata)
writel_relaxed(axictl, drvdata->base + TMC_AXICTL);
tmc_write_dba(drvdata, drvdata->paddr);
+ /*
+ * If the TMC pointers must be programmed before the session,
+ * we have to set it properly (i.e, RRP/RWP to base address and
+ * STS to "not full").
+ */
+ if (tmc_etr_has_cap(drvdata, TMC_ETR_SAVE_RESTORE)) {
+ tmc_write_rrp(drvdata, drvdata->paddr);
+ tmc_write_rwp(drvdata, drvdata->paddr);
+ sts = readl_relaxed(drvdata->base + TMC_STS) & ~TMC_STS_FULL;
+ writel_relaxed(sts, drvdata->base + TMC_STS);
+ }
writel_relaxed(TMC_FFCR_EN_FMT | TMC_FFCR_EN_TI |
TMC_FFCR_FON_FLIN | TMC_FFCR_FON_TRIG_EVT |
diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
index f39caa6a45c3..d0da43a14246 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.h
+++ b/drivers/hwtracing/coresight/coresight-tmc.h
@@ -119,6 +119,15 @@ enum tmc_mem_intf_width {
#define TMC_ETR_SG (0x1U << 0)
/* ETR has separate read/write cache encodings */
#define TMC_ETR_AXI_ARCACHE (0x1U << 1)
+/*
+ * TMC_ETR_SAVE_RESTORE - Values of RRP/RWP/STS.Full are
+ * retained when TMC leaves Disabled state, allowing us to continue
+ * the tracing from a point where we stopped. This also implies that
+ * the RRP/RWP/STS.Full should always be programmed to the correct
+ * value. Unfortunately this is not advertised by the hardware,
+ * so we have to rely on PID of the IP to detect the functionality.
+ */
+#define TMC_ETR_SAVE_RESTORE (0x1U << 2)
/**
* struct tmc_drvdata - specifics associated to an TMC component