1 files changed, 123 insertions, 97 deletions

diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index ba5b6f3b2b88..c5513e5a226a 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -31,7 +31,7 @@
 #include "xfs_reflink.h"
 #include "xfs_extent_busy.h"
 #include "xfs_health.h"
-
+#include "xfs_trace.h"
 
 static DEFINE_MUTEX(xfs_uuid_table_mutex);
 static int xfs_uuid_table_size;
@@ -310,7 +310,7 @@ reread:
 	/*
 	 * Initialize the mount structure from the superblock.
 	 */
-	xfs_sb_from_disk(sbp, XFS_BUF_TO_SBP(bp));
+	xfs_sb_from_disk(sbp, bp->b_addr);
 
 	/*
 	 * If we haven't validated the superblock, do so now before we try
@@ -360,108 +360,122 @@ release_buf:
 }
 
 /*
- * Update alignment values based on mount options and sb values
+ * If the sunit/swidth change would move the precomputed root inode value, we
+ * must reject the ondisk change because repair will stumble over that.
+ * However, we allow the mount to proceed because we never rejected this
+ * combination before.  Returns true to update the sb, false otherwise.
+ */
+static inline int
+xfs_check_new_dalign(
+	struct xfs_mount	*mp,
+	int			new_dalign,
+	bool			*update_sb)
+{
+	struct xfs_sb		*sbp = &mp->m_sb;
+	xfs_ino_t		calc_ino;
+
+	calc_ino = xfs_ialloc_calc_rootino(mp, new_dalign);
+	trace_xfs_check_new_dalign(mp, new_dalign, calc_ino);
+
+	if (sbp->sb_rootino == calc_ino) {
+		*update_sb = true;
+		return 0;
+	}
+
+	xfs_warn(mp,
+"Cannot change stripe alignment; would require moving root inode.");
+
+	/*
+	 * XXX: Next time we add a new incompat feature, this should start
+	 * returning -EINVAL to fail the mount.  Until then, spit out a warning
+	 * that we're ignoring the administrator's instructions.
+	 */
+	xfs_warn(mp, "Skipping superblock stripe alignment update.");
+	*update_sb = false;
+	return 0;
+}
+
+/*
+ * If we were provided with new sunit/swidth values as mount options, make sure
+ * that they pass basic alignment and superblock feature checks, and convert
+ * them into the same units (FSB) that everything else expects.  This step
+ * /must/ be done before computing the inode geometry.
  */
 STATIC int
-xfs_update_alignment(xfs_mount_t *mp)
+xfs_validate_new_dalign(
+	struct xfs_mount	*mp)
 {
-	xfs_sb_t	*sbp = &(mp->m_sb);
+	if (mp->m_dalign == 0)
+		return 0;
 
-	if (mp->m_dalign) {
+	/*
+	 * If stripe unit and stripe width are not multiples
+	 * of the fs blocksize turn off alignment.
+	 */
+	if ((BBTOB(mp->m_dalign) & mp->m_blockmask) ||
+	    (BBTOB(mp->m_swidth) & mp->m_blockmask)) {
+		xfs_warn(mp,
+	"alignment check failed: sunit/swidth vs. blocksize(%d)",
+			mp->m_sb.sb_blocksize);
+		return -EINVAL;
+	} else {
 		/*
-		 * If stripe unit and stripe width are not multiples
-		 * of the fs blocksize turn off alignment.
+		 * Convert the stripe unit and width to FSBs.
 		 */
-		if ((BBTOB(mp->m_dalign) & mp->m_blockmask) ||
-		    (BBTOB(mp->m_swidth) & mp->m_blockmask)) {
+		mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
+		if (mp->m_dalign && (mp->m_sb.sb_agblocks % mp->m_dalign)) {
 			xfs_warn(mp,
-		"alignment check failed: sunit/swidth vs. blocksize(%d)",
-				sbp->sb_blocksize);
+		"alignment check failed: sunit/swidth vs. agsize(%d)",
+				 mp->m_sb.sb_agblocks);
 			return -EINVAL;
-		} else {
-			/*
-			 * Convert the stripe unit and width to FSBs.
-			 */
-			mp->m_dalign = XFS_BB_TO_FSBT(mp, mp->m_dalign);
-			if (mp->m_dalign && (sbp->sb_agblocks % mp->m_dalign)) {
-				xfs_warn(mp,
-			"alignment check failed: sunit/swidth vs. agsize(%d)",
-					 sbp->sb_agblocks);
-				return -EINVAL;
-			} else if (mp->m_dalign) {
-				mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth);
-			} else {
-				xfs_warn(mp,
-			"alignment check failed: sunit(%d) less than bsize(%d)",
-					 mp->m_dalign, sbp->sb_blocksize);
-				return -EINVAL;
-			}
-		}
-
-		/*
-		 * Update superblock with new values
-		 * and log changes
-		 */
-		if (xfs_sb_version_hasdalign(sbp)) {
-			if (sbp->sb_unit != mp->m_dalign) {
-				sbp->sb_unit = mp->m_dalign;
-				mp->m_update_sb = true;
-			}
-			if (sbp->sb_width != mp->m_swidth) {
-				sbp->sb_width = mp->m_swidth;
-				mp->m_update_sb = true;
-			}
+		} else if (mp->m_dalign) {
+			mp->m_swidth = XFS_BB_TO_FSBT(mp, mp->m_swidth);
 		} else {
 			xfs_warn(mp,
-	"cannot change alignment: superblock does not support data alignment");
+		"alignment check failed: sunit(%d) less than bsize(%d)",
+				 mp->m_dalign, mp->m_sb.sb_blocksize);
 			return -EINVAL;
 		}
-	} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
-		    xfs_sb_version_hasdalign(&mp->m_sb)) {
-			mp->m_dalign = sbp->sb_unit;
-			mp->m_swidth = sbp->sb_width;
+	}
+
+	if (!xfs_sb_version_hasdalign(&mp->m_sb)) {
+		xfs_warn(mp,
+"cannot change alignment: superblock does not support data alignment");
+		return -EINVAL;
 	}
 
 	return 0;
 }
 
-/*
- * Set the default minimum read and write sizes unless
- * already specified in a mount option.
- * We use smaller I/O sizes when the file system
- * is being used for NFS service (wsync mount option).
- */
-STATIC void
-xfs_set_rw_sizes(xfs_mount_t *mp)
+/* Update alignment values based on mount options and sb values. */
+STATIC int
+xfs_update_alignment(
+	struct xfs_mount	*mp)
 {
-	xfs_sb_t	*sbp = &(mp->m_sb);
-	int		readio_log, writeio_log;
+	struct xfs_sb		*sbp = &mp->m_sb;
 
-	if (!(mp->m_flags & XFS_MOUNT_DFLT_IOSIZE)) {
-		if (mp->m_flags & XFS_MOUNT_WSYNC) {
-			readio_log = XFS_WSYNC_READIO_LOG;
-			writeio_log = XFS_WSYNC_WRITEIO_LOG;
-		} else {
-			readio_log = XFS_READIO_LOG_LARGE;
-			writeio_log = XFS_WRITEIO_LOG_LARGE;
-		}
-	} else {
-		readio_log = mp->m_readio_log;
-		writeio_log = mp->m_writeio_log;
-	}
+	if (mp->m_dalign) {
+		bool		update_sb;
+		int		error;
 
-	if (sbp->sb_blocklog > readio_log) {
-		mp->m_readio_log = sbp->sb_blocklog;
-	} else {
-		mp->m_readio_log = readio_log;
-	}
-	mp->m_readio_blocks = 1 << (mp->m_readio_log - sbp->sb_blocklog);
-	if (sbp->sb_blocklog > writeio_log) {
-		mp->m_writeio_log = sbp->sb_blocklog;
-	} else {
-		mp->m_writeio_log = writeio_log;
+		if (sbp->sb_unit == mp->m_dalign &&
+		    sbp->sb_width == mp->m_swidth)
+			return 0;
+
+		error = xfs_check_new_dalign(mp, mp->m_dalign, &update_sb);
+		if (error || !update_sb)
+			return error;
+
+		sbp->sb_unit = mp->m_dalign;
+		sbp->sb_width = mp->m_swidth;
+		mp->m_update_sb = true;
+	} else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN &&
+		    xfs_sb_version_hasdalign(&mp->m_sb)) {
+		mp->m_dalign = sbp->sb_unit;
+		mp->m_swidth = sbp->sb_width;
 	}
-	mp->m_writeio_blocks = 1 << (mp->m_writeio_log - sbp->sb_blocklog);
+
+	return 0;
 }
 
 /*
@@ -687,12 +701,12 @@ xfs_mountfs(
 	}
 
 	/*
-	 * Check if sb_agblocks is aligned at stripe boundary
-	 * If sb_agblocks is NOT aligned turn off m_dalign since
-	 * allocator alignment is within an ag, therefore ag has
-	 * to be aligned at stripe boundary.
+	 * If we were given new sunit/swidth options, do some basic validation
+	 * checks and convert the incore dalign and swidth values to the
+	 * same units (FSB) that everything else uses.  This /must/ happen
+	 * before computing the inode geometry.
 	 */
-	error = xfs_update_alignment(mp);
+	error = xfs_validate_new_dalign(mp);
 	if (error)
 		goto out;
 
@@ -703,10 +717,22 @@ xfs_mountfs(
 	xfs_rmapbt_compute_maxlevels(mp);
 	xfs_refcountbt_compute_maxlevels(mp);
 
+	/*
+	 * Check if sb_agblocks is aligned at stripe boundary.  If sb_agblocks
+	 * is NOT aligned turn off m_dalign since allocator alignment is within
+	 * an ag, therefore ag has to be aligned at stripe boundary.  Note that
+	 * we must compute the free space and rmap btree geometry before doing
+	 * this.
+	 */
+	error = xfs_update_alignment(mp);
+	if (error)
+		goto out;
+
 	/* enable fail_at_unmount as default */
 	mp->m_fail_unmount = true;
 
-	error = xfs_sysfs_init(&mp->m_kobj, &xfs_mp_ktype, NULL, mp->m_fsname);
+	error = xfs_sysfs_init(&mp->m_kobj, &xfs_mp_ktype,
+			       NULL, mp->m_super->s_id);
 	if (error)
 		goto out;
 
@@ -728,9 +754,12 @@ xfs_mountfs(
 		goto out_remove_errortag;
 
 	/*
-	 * Set the minimum read and write sizes
+	 * Update the preferred write size based on the information from the
+	 * on-disk superblock.
 	 */
-	xfs_set_rw_sizes(mp);
+	mp->m_allocsize_log =
+		max_t(uint32_t, sbp->sb_blocklog, mp->m_allocsize_log);
+	mp->m_allocsize_blocks = 1U << (mp->m_allocsize_log - sbp->sb_blocklog);
 
 	/* set the low space thresholds for dynamic preallocation */
 	xfs_set_low_space_thresholds(mp);
@@ -796,9 +825,8 @@ xfs_mountfs(
 		goto out_free_dir;
 	}
 
-	if (!sbp->sb_logblocks) {
+	if (XFS_IS_CORRUPT(mp, !sbp->sb_logblocks)) {
 		xfs_warn(mp, "no log defined");
-		XFS_ERROR_REPORT("xfs_mountfs", XFS_ERRLEVEL_LOW, mp);
 		error = -EFSCORRUPTED;
 		goto out_free_perag;
 	}
@@ -836,12 +864,10 @@ xfs_mountfs(
 
 	ASSERT(rip != NULL);
 
-	if (unlikely(!S_ISDIR(VFS_I(rip)->i_mode))) {
+	if (XFS_IS_CORRUPT(mp, !S_ISDIR(VFS_I(rip)->i_mode))) {
 		xfs_warn(mp, "corrupted root inode %llu: not a directory",
 			(unsigned long long)rip->i_ino);
 		xfs_iunlock(rip, XFS_ILOCK_EXCL);
-		XFS_ERROR_REPORT("xfs_mountfs_int(2)", XFS_ERRLEVEL_LOW,
-				 mp);
 		error = -EFSCORRUPTED;
 		goto out_rele_rip;
 	}
@@ -1277,7 +1303,7 @@ xfs_mod_fdblocks(
 	printk_once(KERN_WARNING
 		"Filesystem \"%s\": reserve blocks depleted! "
 		"Consider increasing reserve pool size.",
-		mp->m_fsname);
+		mp->m_super->s_id);
 fdblocks_enospc:
 	spin_unlock(&mp->m_sb_lock);
 	return -ENOSPC;