summaryrefslogtreecommitdiff
path: root/include/asm-mn10300/dma.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/asm-mn10300/dma.h')
-rw-r--r--include/asm-mn10300/dma.h118
1 files changed, 118 insertions, 0 deletions
diff --git a/include/asm-mn10300/dma.h b/include/asm-mn10300/dma.h
new file mode 100644
index 000000000000..098df2e617ab
--- /dev/null
+++ b/include/asm-mn10300/dma.h
@@ -0,0 +1,118 @@
+/* MN10300 ISA DMA handlers and definitions
+ *
+ * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd.
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+#include <asm/system.h>
+#include <linux/spinlock.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+
+#undef MAX_DMA_CHANNELS /* switch off linux/kernel/dma.c */
+#define MAX_DMA_ADDRESS 0xbfffffff
+
+extern spinlock_t dma_spin_lock;
+
+static inline unsigned long claim_dma_lock(void)
+{
+ unsigned long flags;
+ spin_lock_irqsave(&dma_spin_lock, flags);
+ return flags;
+}
+
+static inline void release_dma_lock(unsigned long flags)
+{
+ spin_unlock_irqrestore(&dma_spin_lock, flags);
+}
+
+/* enable/disable a specific DMA channel */
+static inline void enable_dma(unsigned int dmanr)
+{
+}
+
+static inline void disable_dma(unsigned int dmanr)
+{
+}
+
+/* Clear the 'DMA Pointer Flip Flop'.
+ * Write 0 for LSB/MSB, 1 for MSB/LSB access.
+ * Use this once to initialize the FF to a known state.
+ * After that, keep track of it. :-)
+ * --- In order to do that, the DMA routines below should ---
+ * --- only be used while holding the DMA lock ! ---
+ */
+static inline void clear_dma_ff(unsigned int dmanr)
+{
+}
+
+/* set mode (above) for a specific DMA channel */
+static inline void set_dma_mode(unsigned int dmanr, char mode)
+{
+}
+
+/* Set only the page register bits of the transfer address.
+ * This is used for successive transfers when we know the contents of
+ * the lower 16 bits of the DMA current address register, but a 64k boundary
+ * may have been crossed.
+ */
+static inline void set_dma_page(unsigned int dmanr, char pagenr)
+{
+}
+
+
+/* Set transfer address & page bits for specific DMA channel.
+ * Assumes dma flipflop is clear.
+ */
+static inline void set_dma_addr(unsigned int dmanr, unsigned int a)
+{
+}
+
+
+/* Set transfer size (max 64k for DMA1..3, 128k for DMA5..7) for
+ * a specific DMA channel.
+ * You must ensure the parameters are valid.
+ * NOTE: from a manual: "the number of transfers is one more
+ * than the initial word count"! This is taken into account.
+ * Assumes dma flip-flop is clear.
+ * NOTE 2: "count" represents _bytes_ and must be even for channels 5-7.
+ */
+static inline void set_dma_count(unsigned int dmanr, unsigned int count)
+{
+}
+
+
+/* Get DMA residue count. After a DMA transfer, this
+ * should return zero. Reading this while a DMA transfer is
+ * still in progress will return unpredictable results.
+ * If called before the channel has been used, it may return 1.
+ * Otherwise, it returns the number of _bytes_ left to transfer.
+ *
+ * Assumes DMA flip-flop is clear.
+ */
+static inline int get_dma_residue(unsigned int dmanr)
+{
+ return 0;
+}
+
+
+/* These are in kernel/dma.c: */
+extern int request_dma(unsigned int dmanr, const char *device_id);
+extern void free_dma(unsigned int dmanr);
+
+/* From PCI */
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_DMA_H */