diff options
Diffstat (limited to 'include/linux/dma')
| -rw-r--r-- | include/linux/dma/pxa-dma.h | 20 | ||||
| -rw-r--r-- | include/linux/dma/sprd-dma.h | 186 | ||||
| -rw-r--r-- | include/linux/dma/xilinx_dma.h | 2 |
3 files changed, 197 insertions, 11 deletions
diff --git a/include/linux/dma/pxa-dma.h b/include/linux/dma/pxa-dma.h index e56ec7af4fd7..fceb5df07097 100644 --- a/include/linux/dma/pxa-dma.h +++ b/include/linux/dma/pxa-dma.h @@ -9,20 +9,18 @@ enum pxad_chan_prio { PXAD_PRIO_LOWEST, }; +/** + * struct pxad_param - dma channel request parameters + * @drcmr: requestor line number + * @prio: minimal mandatory priority of the channel + * + * If a requested channel is granted, its priority will be at least @prio, + * ie. if PXAD_PRIO_LOW is required, the requested channel will be either + * PXAD_PRIO_LOW, PXAD_PRIO_NORMAL or PXAD_PRIO_HIGHEST. + */ struct pxad_param { unsigned int drcmr; enum pxad_chan_prio prio; }; -struct dma_chan; - -#ifdef CONFIG_PXA_DMA -bool pxad_filter_fn(struct dma_chan *chan, void *param); -#else -static inline bool pxad_filter_fn(struct dma_chan *chan, void *param) -{ - return false; -} -#endif - #endif /* _PXA_DMA_H_ */ diff --git a/include/linux/dma/sprd-dma.h b/include/linux/dma/sprd-dma.h new file mode 100644 index 000000000000..ab82df64682a --- /dev/null +++ b/include/linux/dma/sprd-dma.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef _SPRD_DMA_H_ +#define _SPRD_DMA_H_ + +#define SPRD_DMA_REQ_SHIFT 8 +#define SPRD_DMA_TRG_MODE_SHIFT 16 +#define SPRD_DMA_CHN_MODE_SHIFT 24 +#define SPRD_DMA_FLAGS(chn_mode, trg_mode, req_mode, int_type) \ + ((chn_mode) << SPRD_DMA_CHN_MODE_SHIFT | \ + (trg_mode) << SPRD_DMA_TRG_MODE_SHIFT | \ + (req_mode) << SPRD_DMA_REQ_SHIFT | (int_type)) + +/* + * The Spreadtrum DMA controller supports channel 2-stage tansfer, that means + * we can request 2 dma channels, one for source channel, and another one for + * destination channel. Each channel is independent, and has its own + * configurations. Once the source channel's transaction is done, it will + * trigger the destination channel's transaction automatically by hardware + * signal. + * + * To support 2-stage tansfer, we must configure the channel mode and trigger + * mode as below definition. + */ + +/* + * enum sprd_dma_chn_mode: define the DMA channel mode for 2-stage transfer + * @SPRD_DMA_CHN_MODE_NONE: No channel mode setting which means channel doesn't + * support the 2-stage transfer. + * @SPRD_DMA_SRC_CHN0: Channel used as source channel 0. + * @SPRD_DMA_SRC_CHN1: Channel used as source channel 1. + * @SPRD_DMA_DST_CHN0: Channel used as destination channel 0. + * @SPRD_DMA_DST_CHN1: Channel used as destination channel 1. + * + * Now the DMA controller can supports 2 groups 2-stage transfer. + */ +enum sprd_dma_chn_mode { + SPRD_DMA_CHN_MODE_NONE, + SPRD_DMA_SRC_CHN0, + SPRD_DMA_SRC_CHN1, + SPRD_DMA_DST_CHN0, + SPRD_DMA_DST_CHN1, +}; + +/* + * enum sprd_dma_trg_mode: define the DMA channel trigger mode for 2-stage + * transfer + * @SPRD_DMA_NO_TRG: No trigger setting. + * @SPRD_DMA_FRAG_DONE_TRG: Trigger the transaction of destination channel + * automatically once the source channel's fragment request is done. + * @SPRD_DMA_BLOCK_DONE_TRG: Trigger the transaction of destination channel + * automatically once the source channel's block request is done. + * @SPRD_DMA_TRANS_DONE_TRG: Trigger the transaction of destination channel + * automatically once the source channel's transfer request is done. + * @SPRD_DMA_LIST_DONE_TRG: Trigger the transaction of destination channel + * automatically once the source channel's link-list request is done. + */ +enum sprd_dma_trg_mode { + SPRD_DMA_NO_TRG, + SPRD_DMA_FRAG_DONE_TRG, + SPRD_DMA_BLOCK_DONE_TRG, + SPRD_DMA_TRANS_DONE_TRG, + SPRD_DMA_LIST_DONE_TRG, +}; + +/* + * enum sprd_dma_req_mode: define the DMA request mode + * @SPRD_DMA_FRAG_REQ: fragment request mode + * @SPRD_DMA_BLK_REQ: block request mode + * @SPRD_DMA_TRANS_REQ: transaction request mode + * @SPRD_DMA_LIST_REQ: link-list request mode + * + * We have 4 types request mode: fragment mode, block mode, transaction mode + * and linklist mode. One transaction can contain several blocks, one block can + * contain several fragments. Link-list mode means we can save several DMA + * configuration into one reserved memory, then DMA can fetch each DMA + * configuration automatically to start transfer. + */ +enum sprd_dma_req_mode { + SPRD_DMA_FRAG_REQ, + SPRD_DMA_BLK_REQ, + SPRD_DMA_TRANS_REQ, + SPRD_DMA_LIST_REQ, +}; + +/* + * enum sprd_dma_int_type: define the DMA interrupt type + * @SPRD_DMA_NO_INT: do not need generate DMA interrupts. + * @SPRD_DMA_FRAG_INT: fragment done interrupt when one fragment request + * is done. + * @SPRD_DMA_BLK_INT: block done interrupt when one block request is done. + * @SPRD_DMA_BLK_FRAG_INT: block and fragment interrupt when one fragment + * or one block request is done. + * @SPRD_DMA_TRANS_INT: tansaction done interrupt when one transaction + * request is done. + * @SPRD_DMA_TRANS_FRAG_INT: transaction and fragment interrupt when one + * transaction request or fragment request is done. + * @SPRD_DMA_TRANS_BLK_INT: transaction and block interrupt when one + * transaction request or block request is done. + * @SPRD_DMA_LIST_INT: link-list done interrupt when one link-list request + * is done. + * @SPRD_DMA_CFGERR_INT: configure error interrupt when configuration is + * incorrect. + */ +enum sprd_dma_int_type { + SPRD_DMA_NO_INT, + SPRD_DMA_FRAG_INT, + SPRD_DMA_BLK_INT, + SPRD_DMA_BLK_FRAG_INT, + SPRD_DMA_TRANS_INT, + SPRD_DMA_TRANS_FRAG_INT, + SPRD_DMA_TRANS_BLK_INT, + SPRD_DMA_LIST_INT, + SPRD_DMA_CFGERR_INT, +}; + +/* + * struct sprd_dma_linklist - DMA link-list address structure + * @virt_addr: link-list virtual address to configure link-list node + * @phy_addr: link-list physical address to link DMA transfer + * + * The Spreadtrum DMA controller supports the link-list mode, that means slaves + * can supply several groups configurations (each configuration represents one + * DMA transfer) saved in memory, and DMA controller will link these groups + * configurations by writing the physical address of each configuration into the + * link-list register. + * + * Just as shown below, the link-list pointer register will be pointed to the + * physical address of 'configuration 1', and the 'configuration 1' link-list + * pointer will be pointed to 'configuration 2', and so on. + * Once trigger the DMA transfer, the DMA controller will load 'configuration + * 1' to its registers automatically, after 'configuration 1' transaction is + * done, DMA controller will load 'configuration 2' automatically, until all + * DMA transactions are done. + * + * Note: The last link-list pointer should point to the physical address + * of 'configuration 1', which can avoid DMA controller loads incorrect + * configuration when the last configuration transaction is done. + * + * DMA controller linklist memory + * ====================== ----------------------- + *| | | configuration 1 |<--- + *| DMA controller | ------->| | | + *| | | | | | + *| | | | | | + *| | | | | | + *| linklist pointer reg |---- ----| linklist pointer | | + * ====================== | ----------------------- | + * | | + * | ----------------------- | + * | | configuration 2 | | + * --->| | | + * | | | + * | | | + * | | | + * ----| linklist pointer | | + * | ----------------------- | + * | | + * | ----------------------- | + * | | configuration 3 | | + * --->| | | + * | | | + * | . | | + * . | + * . | + * . | + * | . | + * | ----------------------- | + * | | configuration n | | + * --->| | | + * | | | + * | | | + * | | | + * | linklist pointer |---- + * ----------------------- + * + * To support the link-list mode, DMA slaves should allocate one segment memory + * from always-on IRAM or dma coherent memory to store these groups of DMA + * configuration, and pass the virtual and physical address to DMA controller. + */ +struct sprd_dma_linklist { + unsigned long virt_addr; + phys_addr_t phy_addr; +}; + +#endif diff --git a/include/linux/dma/xilinx_dma.h b/include/linux/dma/xilinx_dma.h index 34b98f276ed0..5b6e61e4b3aa 100644 --- a/include/linux/dma/xilinx_dma.h +++ b/include/linux/dma/xilinx_dma.h @@ -27,6 +27,7 @@ * @delay: Delay counter * @reset: Reset Channel * @ext_fsync: External Frame Sync source + * @vflip_en: Vertical Flip enable */ struct xilinx_vdma_config { int frm_dly; @@ -39,6 +40,7 @@ struct xilinx_vdma_config { int delay; int reset; int ext_fsync; + bool vflip_en; }; int xilinx_vdma_channel_set_config(struct dma_chan *dchan, |