diff options
Diffstat (limited to 'include/linux/i2c')
| -rw-r--r-- | include/linux/i2c/bfin_twi.h | 145 | ||||
| -rw-r--r-- | include/linux/i2c/mlxcpld.h | 52 | ||||
| -rw-r--r-- | include/linux/i2c/pca954x.h | 48 | ||||
| -rw-r--r-- | include/linux/i2c/tc35876x.h | 11 |
4 files changed, 0 insertions, 256 deletions
diff --git a/include/linux/i2c/bfin_twi.h b/include/linux/i2c/bfin_twi.h deleted file mode 100644 index 135a4e0876ae..000000000000 --- a/include/linux/i2c/bfin_twi.h +++ /dev/null @@ -1,145 +0,0 @@ -/* - * i2c-bfin-twi.h - interface to ADI TWI controller - * - * Copyright 2005-2014 Analog Devices Inc. - * - * Licensed under the GPL-2 or later. - */ - -#ifndef __I2C_BFIN_TWI_H__ -#define __I2C_BFIN_TWI_H__ - -#include <linux/types.h> -#include <linux/i2c.h> - -/* - * ADI twi registers layout - */ -struct bfin_twi_regs { - u16 clkdiv; - u16 dummy1; - u16 control; - u16 dummy2; - u16 slave_ctl; - u16 dummy3; - u16 slave_stat; - u16 dummy4; - u16 slave_addr; - u16 dummy5; - u16 master_ctl; - u16 dummy6; - u16 master_stat; - u16 dummy7; - u16 master_addr; - u16 dummy8; - u16 int_stat; - u16 dummy9; - u16 int_mask; - u16 dummy10; - u16 fifo_ctl; - u16 dummy11; - u16 fifo_stat; - u16 dummy12; - u32 __pad[20]; - u16 xmt_data8; - u16 dummy13; - u16 xmt_data16; - u16 dummy14; - u16 rcv_data8; - u16 dummy15; - u16 rcv_data16; - u16 dummy16; -}; - -struct bfin_twi_iface { - int irq; - spinlock_t lock; - char read_write; - u8 command; - u8 *transPtr; - int readNum; - int writeNum; - int cur_mode; - int manual_stop; - int result; - struct i2c_adapter adap; - struct completion complete; - struct i2c_msg *pmsg; - int msg_num; - int cur_msg; - u16 saved_clkdiv; - u16 saved_control; - struct bfin_twi_regs __iomem *regs_base; -}; - -/* ******************** TWO-WIRE INTERFACE (TWI) MASKS ********************/ -/* TWI_CLKDIV Macros (Use: *pTWI_CLKDIV = CLKLOW(x)|CLKHI(y); ) */ -#define CLKLOW(x) ((x) & 0xFF) /* Periods Clock Is Held Low */ -#define CLKHI(y) (((y)&0xFF)<<0x8) /* Periods Before New Clock Low */ - -/* TWI_PRESCALE Masks */ -#define PRESCALE 0x007F /* SCLKs Per Internal Time Reference (10MHz) */ -#define TWI_ENA 0x0080 /* TWI Enable */ -#define SCCB 0x0200 /* SCCB Compatibility Enable */ - -/* TWI_SLAVE_CTL Masks */ -#define SEN 0x0001 /* Slave Enable */ -#define SADD_LEN 0x0002 /* Slave Address Length */ -#define STDVAL 0x0004 /* Slave Transmit Data Valid */ -#define NAK 0x0008 /* NAK Generated At Conclusion Of Transfer */ -#define GEN 0x0010 /* General Call Address Matching Enabled */ - -/* TWI_SLAVE_STAT Masks */ -#define SDIR 0x0001 /* Slave Transfer Direction (RX/TX*) */ -#define GCALL 0x0002 /* General Call Indicator */ - -/* TWI_MASTER_CTL Masks */ -#define MEN 0x0001 /* Master Mode Enable */ -#define MADD_LEN 0x0002 /* Master Address Length */ -#define MDIR 0x0004 /* Master Transmit Direction (RX/TX*) */ -#define FAST 0x0008 /* Use Fast Mode Timing Specs */ -#define STOP 0x0010 /* Issue Stop Condition */ -#define RSTART 0x0020 /* Repeat Start or Stop* At End Of Transfer */ -#define DCNT 0x3FC0 /* Data Bytes To Transfer */ -#define SDAOVR 0x4000 /* Serial Data Override */ -#define SCLOVR 0x8000 /* Serial Clock Override */ - -/* TWI_MASTER_STAT Masks */ -#define MPROG 0x0001 /* Master Transfer In Progress */ -#define LOSTARB 0x0002 /* Lost Arbitration Indicator (Xfer Aborted) */ -#define ANAK 0x0004 /* Address Not Acknowledged */ -#define DNAK 0x0008 /* Data Not Acknowledged */ -#define BUFRDERR 0x0010 /* Buffer Read Error */ -#define BUFWRERR 0x0020 /* Buffer Write Error */ -#define SDASEN 0x0040 /* Serial Data Sense */ -#define SCLSEN 0x0080 /* Serial Clock Sense */ -#define BUSBUSY 0x0100 /* Bus Busy Indicator */ - -/* TWI_INT_SRC and TWI_INT_ENABLE Masks */ -#define SINIT 0x0001 /* Slave Transfer Initiated */ -#define SCOMP 0x0002 /* Slave Transfer Complete */ -#define SERR 0x0004 /* Slave Transfer Error */ -#define SOVF 0x0008 /* Slave Overflow */ -#define MCOMP 0x0010 /* Master Transfer Complete */ -#define MERR 0x0020 /* Master Transfer Error */ -#define XMTSERV 0x0040 /* Transmit FIFO Service */ -#define RCVSERV 0x0080 /* Receive FIFO Service */ - -/* TWI_FIFO_CTRL Masks */ -#define XMTFLUSH 0x0001 /* Transmit Buffer Flush */ -#define RCVFLUSH 0x0002 /* Receive Buffer Flush */ -#define XMTINTLEN 0x0004 /* Transmit Buffer Interrupt Length */ -#define RCVINTLEN 0x0008 /* Receive Buffer Interrupt Length */ - -/* TWI_FIFO_STAT Masks */ -#define XMTSTAT 0x0003 /* Transmit FIFO Status */ -#define XMT_EMPTY 0x0000 /* Transmit FIFO Empty */ -#define XMT_HALF 0x0001 /* Transmit FIFO Has 1 Byte To Write */ -#define XMT_FULL 0x0003 /* Transmit FIFO Full (2 Bytes To Write) */ - -#define RCVSTAT 0x000C /* Receive FIFO Status */ -#define RCV_EMPTY 0x0000 /* Receive FIFO Empty */ -#define RCV_HALF 0x0004 /* Receive FIFO Has 1 Byte To Read */ -#define RCV_FULL 0x000C /* Receive FIFO Full (2 Bytes To Read) */ - -#endif diff --git a/include/linux/i2c/mlxcpld.h b/include/linux/i2c/mlxcpld.h deleted file mode 100644 index b08dcb183fca..000000000000 --- a/include/linux/i2c/mlxcpld.h +++ /dev/null @@ -1,52 +0,0 @@ -/* - * mlxcpld.h - Mellanox I2C multiplexer support in CPLD - * - * Copyright (c) 2016 Mellanox Technologies. All rights reserved. - * Copyright (c) 2016 Michael Shych <michaels@mellanox.com> - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions are met: - * - * 1. Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the distribution. - * 3. Neither the names of the copyright holders nor the names of its - * contributors may be used to endorse or promote products derived from - * this software without specific prior written permission. - * - * Alternatively, this software may be distributed under the terms of the - * GNU General Public License ("GPL") version 2 as published by the Free - * Software Foundation. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE - * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS - * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN - * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) - * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE - * POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _LINUX_I2C_MLXCPLD_H -#define _LINUX_I2C_MLXCPLD_H - -/* Platform data for the CPLD I2C multiplexers */ - -/* mlxcpld_mux_plat_data - per mux data, used with i2c_register_board_info - * @adap_ids - adapter array - * @num_adaps - number of adapters - * @sel_reg_addr - mux select register offset in CPLD space - */ -struct mlxcpld_mux_plat_data { - int *adap_ids; - int num_adaps; - int sel_reg_addr; -}; - -#endif /* _LINUX_I2C_MLXCPLD_H */ diff --git a/include/linux/i2c/pca954x.h b/include/linux/i2c/pca954x.h deleted file mode 100644 index 1712677d5904..000000000000 --- a/include/linux/i2c/pca954x.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * - * pca954x.h - I2C multiplexer/switch support - * - * Copyright (c) 2008-2009 Rodolfo Giometti <giometti@linux.it> - * Copyright (c) 2008-2009 Eurotech S.p.A. <info@eurotech.it> - * Michael Lawnick <michael.lawnick.ext@nsn.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - - -#ifndef _LINUX_I2C_PCA954X_H -#define _LINUX_I2C_PCA954X_H - -/* Platform data for the PCA954x I2C multiplexers */ - -/* Per channel initialisation data: - * @adap_id: bus number for the adapter. 0 = don't care - * @deselect_on_exit: set this entry to 1, if your H/W needs deselection - * of this channel after transaction. - * - */ -struct pca954x_platform_mode { - int adap_id; - unsigned int deselect_on_exit:1; - unsigned int class; -}; - -/* Per mux/switch data, used with i2c_register_board_info */ -struct pca954x_platform_data { - struct pca954x_platform_mode *modes; - int num_modes; -}; - -#endif /* _LINUX_I2C_PCA954X_H */ diff --git a/include/linux/i2c/tc35876x.h b/include/linux/i2c/tc35876x.h deleted file mode 100644 index cd6a51c71e7e..000000000000 --- a/include/linux/i2c/tc35876x.h +++ /dev/null @@ -1,11 +0,0 @@ - -#ifndef _TC35876X_H -#define _TC35876X_H - -struct tc35876x_platform_data { - int gpio_bridge_reset; - int gpio_panel_bl_en; - int gpio_panel_vadd; -}; - -#endif /* _TC35876X_H */ |