summaryrefslogtreecommitdiff
path: root/include/linux/ipmi.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/ipmi.h')
-rw-r--r--include/linux/ipmi.h422
1 files changed, 1 insertions, 421 deletions
diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h
index 48dcba9b2065..1487e7906bbd 100644
--- a/include/linux/ipmi.h
+++ b/include/linux/ipmi.h
@@ -30,191 +30,11 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-
#ifndef __LINUX_IPMI_H
#define __LINUX_IPMI_H
-#include <linux/ipmi_msgdefs.h>
-#include <linux/compiler.h>
-
-/*
- * This file describes an interface to an IPMI driver. You have to
- * have a fairly good understanding of IPMI to use this, so go read
- * the specs first before actually trying to do anything.
- *
- * With that said, this driver provides a multi-user interface to the
- * IPMI driver, and it allows multiple IPMI physical interfaces below
- * the driver. The physical interfaces bind as a lower layer on the
- * driver. They appear as interfaces to the application using this
- * interface.
- *
- * Multi-user means that multiple applications may use the driver,
- * send commands, receive responses, etc. The driver keeps track of
- * commands the user sends and tracks the responses. The responses
- * will go back to the application that send the command. If the
- * response doesn't come back in time, the driver will return a
- * timeout error response to the application. Asynchronous events
- * from the BMC event queue will go to all users bound to the driver.
- * The incoming event queue in the BMC will automatically be flushed
- * if it becomes full and it is queried once a second to see if
- * anything is in it. Incoming commands to the driver will get
- * delivered as commands.
- *
- * This driver provides two main interfaces: one for in-kernel
- * applications and another for userland applications. The
- * capabilities are basically the same for both interface, although
- * the interfaces are somewhat different. The stuff in the
- * #ifdef __KERNEL__ below is the in-kernel interface. The userland
- * interface is defined later in the file. */
-
-
-
-/*
- * This is an overlay for all the address types, so it's easy to
- * determine the actual address type. This is kind of like addresses
- * work for sockets.
- */
-#define IPMI_MAX_ADDR_SIZE 32
-struct ipmi_addr {
- /* Try to take these from the "Channel Medium Type" table
- in section 6.5 of the IPMI 1.5 manual. */
- int addr_type;
- short channel;
- char data[IPMI_MAX_ADDR_SIZE];
-};
-
-/*
- * When the address is not used, the type will be set to this value.
- * The channel is the BMC's channel number for the channel (usually
- * 0), or IPMC_BMC_CHANNEL if communicating directly with the BMC.
- */
-#define IPMI_SYSTEM_INTERFACE_ADDR_TYPE 0x0c
-struct ipmi_system_interface_addr {
- int addr_type;
- short channel;
- unsigned char lun;
-};
-
-/* An IPMB Address. */
-#define IPMI_IPMB_ADDR_TYPE 0x01
-/* Used for broadcast get device id as described in section 17.9 of the
- IPMI 1.5 manual. */
-#define IPMI_IPMB_BROADCAST_ADDR_TYPE 0x41
-struct ipmi_ipmb_addr {
- int addr_type;
- short channel;
- unsigned char slave_addr;
- unsigned char lun;
-};
-
-/*
- * A LAN Address. This is an address to/from a LAN interface bridged
- * by the BMC, not an address actually out on the LAN.
- *
- * A conscious decision was made here to deviate slightly from the IPMI
- * spec. We do not use rqSWID and rsSWID like it shows in the
- * message. Instead, we use remote_SWID and local_SWID. This means
- * that any message (a request or response) from another device will
- * always have exactly the same address. If you didn't do this,
- * requests and responses from the same device would have different
- * addresses, and that's not too cool.
- *
- * In this address, the remote_SWID is always the SWID the remote
- * message came from, or the SWID we are sending the message to.
- * local_SWID is always our SWID. Note that having our SWID in the
- * message is a little weird, but this is required.
- */
-#define IPMI_LAN_ADDR_TYPE 0x04
-struct ipmi_lan_addr {
- int addr_type;
- short channel;
- unsigned char privilege;
- unsigned char session_handle;
- unsigned char remote_SWID;
- unsigned char local_SWID;
- unsigned char lun;
-};
-
-
-/*
- * Channel for talking directly with the BMC. When using this
- * channel, This is for the system interface address type only. FIXME
- * - is this right, or should we use -1?
- */
-#define IPMI_BMC_CHANNEL 0xf
-#define IPMI_NUM_CHANNELS 0x10
-
-/*
- * Used to signify an "all channel" bitmask. This is more than the
- * actual number of channels because this is used in userland and
- * will cover us if the number of channels is extended.
- */
-#define IPMI_CHAN_ALL (~0)
-
-
-/*
- * A raw IPMI message without any addressing. This covers both
- * commands and responses. The completion code is always the first
- * byte of data in the response (as the spec shows the messages laid
- * out).
- */
-struct ipmi_msg {
- unsigned char netfn;
- unsigned char cmd;
- unsigned short data_len;
- unsigned char __user *data;
-};
-
-struct kernel_ipmi_msg {
- unsigned char netfn;
- unsigned char cmd;
- unsigned short data_len;
- unsigned char *data;
-};
-
-/*
- * Various defines that are useful for IPMI applications.
- */
-#define IPMI_INVALID_CMD_COMPLETION_CODE 0xC1
-#define IPMI_TIMEOUT_COMPLETION_CODE 0xC3
-#define IPMI_UNKNOWN_ERR_COMPLETION_CODE 0xff
-
+#include <uapi/linux/ipmi.h>
-/*
- * Receive types for messages coming from the receive interface. This
- * is used for the receive in-kernel interface and in the receive
- * IOCTL.
- *
- * The "IPMI_RESPONSE_RESPNOSE_TYPE" is a little strange sounding, but
- * it allows you to get the message results when you send a response
- * message.
- */
-#define IPMI_RESPONSE_RECV_TYPE 1 /* A response to a command */
-#define IPMI_ASYNC_EVENT_RECV_TYPE 2 /* Something from the event queue */
-#define IPMI_CMD_RECV_TYPE 3 /* A command from somewhere else */
-#define IPMI_RESPONSE_RESPONSE_TYPE 4 /* The response for
- a sent response, giving any
- error status for sending the
- response. When you send a
- response message, this will
- be returned. */
-#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */
-
-/* Note that async events and received commands do not have a completion
- code as the first byte of the incoming data, unlike a response. */
-
-
-/*
- * Modes for ipmi_set_maint_mode() and the userland IOCTL. The AUTO
- * setting is the default and means it will be set on certain
- * commands. Hard setting it on and off will override automatic
- * operation.
- */
-#define IPMI_MAINTENANCE_MODE_AUTO 0
-#define IPMI_MAINTENANCE_MODE_OFF 1
-#define IPMI_MAINTENANCE_MODE_ON 2
-
-#ifdef __KERNEL__
/*
* The in-kernel interface.
@@ -493,244 +313,4 @@ struct ipmi_smi_info {
/* This is to get the private info of ipmi_smi_t */
extern int ipmi_get_smi_info(int if_num, struct ipmi_smi_info *data);
-#endif /* __KERNEL__ */
-
-
-/*
- * The userland interface
- */
-
-/*
- * The userland interface for the IPMI driver is a standard character
- * device, with each instance of an interface registered as a minor
- * number under the major character device.
- *
- * The read and write calls do not work, to get messages in and out
- * requires ioctl calls because of the complexity of the data. select
- * and poll do work, so you can wait for input using the file
- * descriptor, you just can use read to get it.
- *
- * In general, you send a command down to the interface and receive
- * responses back. You can use the msgid value to correlate commands
- * and responses, the driver will take care of figuring out which
- * incoming messages are for which command and find the proper msgid
- * value to report. You will only receive reponses for commands you
- * send. Asynchronous events, however, go to all open users, so you
- * must be ready to handle these (or ignore them if you don't care).
- *
- * The address type depends upon the channel type. When talking
- * directly to the BMC (IPMC_BMC_CHANNEL), the address is ignored
- * (IPMI_UNUSED_ADDR_TYPE). When talking to an IPMB channel, you must
- * supply a valid IPMB address with the addr_type set properly.
- *
- * When talking to normal channels, the driver takes care of the
- * details of formatting and sending messages on that channel. You do
- * not, for instance, have to format a send command, you just send
- * whatever command you want to the channel, the driver will create
- * the send command, automatically issue receive command and get even
- * commands, and pass those up to the proper user.
- */
-
-
-/* The magic IOCTL value for this interface. */
-#define IPMI_IOC_MAGIC 'i'
-
-
-/* Messages sent to the interface are this format. */
-struct ipmi_req {
- unsigned char __user *addr; /* Address to send the message to. */
- unsigned int addr_len;
-
- long msgid; /* The sequence number for the message. This
- exact value will be reported back in the
- response to this request if it is a command.
- If it is a response, this will be used as
- the sequence value for the response. */
-
- struct ipmi_msg msg;
-};
-/*
- * Send a message to the interfaces. error values are:
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid, or the command
- * was not allowed.
- * - EMSGSIZE - The message to was too large.
- * - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND _IOR(IPMI_IOC_MAGIC, 13, \
- struct ipmi_req)
-
-/* Messages sent to the interface with timing parameters are this
- format. */
-struct ipmi_req_settime {
- struct ipmi_req req;
-
- /* See ipmi_request_settime() above for details on these
- values. */
- int retries;
- unsigned int retry_time_ms;
-};
-/*
- * Send a message to the interfaces with timing parameters. error values
- * are:
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid, or the command
- * was not allowed.
- * - EMSGSIZE - The message to was too large.
- * - ENOMEM - Buffers could not be allocated for the command.
- */
-#define IPMICTL_SEND_COMMAND_SETTIME _IOR(IPMI_IOC_MAGIC, 21, \
- struct ipmi_req_settime)
-
-/* Messages received from the interface are this format. */
-struct ipmi_recv {
- int recv_type; /* Is this a command, response or an
- asyncronous event. */
-
- unsigned char __user *addr; /* Address the message was from is put
- here. The caller must supply the
- memory. */
- unsigned int addr_len; /* The size of the address buffer.
- The caller supplies the full buffer
- length, this value is updated to
- the actual message length when the
- message is received. */
-
- long msgid; /* The sequence number specified in the request
- if this is a response. If this is a command,
- this will be the sequence number from the
- command. */
-
- struct ipmi_msg msg; /* The data field must point to a buffer.
- The data_size field must be set to the
- size of the message buffer. The
- caller supplies the full buffer
- length, this value is updated to the
- actual message length when the message
- is received. */
-};
-
-/*
- * Receive a message. error values:
- * - EAGAIN - no messages in the queue.
- * - EFAULT - an address supplied was invalid.
- * - EINVAL - The address supplied was not valid.
- * - EMSGSIZE - The message to was too large to fit into the message buffer,
- * the message will be left in the buffer. */
-#define IPMICTL_RECEIVE_MSG _IOWR(IPMI_IOC_MAGIC, 12, \
- struct ipmi_recv)
-
-/*
- * Like RECEIVE_MSG, but if the message won't fit in the buffer, it
- * will truncate the contents instead of leaving the data in the
- * buffer.
- */
-#define IPMICTL_RECEIVE_MSG_TRUNC _IOWR(IPMI_IOC_MAGIC, 11, \
- struct ipmi_recv)
-
-/* Register to get commands from other entities on this interface. */
-struct ipmi_cmdspec {
- unsigned char netfn;
- unsigned char cmd;
-};
-
-/*
- * Register to receive a specific command. error values:
- * - EFAULT - an address supplied was invalid.
- * - EBUSY - The netfn/cmd supplied was already in use.
- * - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 14, \
- struct ipmi_cmdspec)
-/*
- * Unregister a regsitered command. error values:
- * - EFAULT - an address supplied was invalid.
- * - ENOENT - The netfn/cmd was not found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD _IOR(IPMI_IOC_MAGIC, 15, \
- struct ipmi_cmdspec)
-
-/*
- * Register to get commands from other entities on specific channels.
- * This way, you can only listen on specific channels, or have messages
- * from some channels go to one place and other channels to someplace
- * else. The chans field is a bitmask, (1 << channel) for each channel.
- * It may be IPMI_CHAN_ALL for all channels.
- */
-struct ipmi_cmdspec_chans {
- unsigned int netfn;
- unsigned int cmd;
- unsigned int chans;
-};
-
-/*
- * Register to receive a specific command on specific channels. error values:
- * - EFAULT - an address supplied was invalid.
- * - EBUSY - One of the netfn/cmd/chans supplied was already in use.
- * - ENOMEM - could not allocate memory for the entry.
- */
-#define IPMICTL_REGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 28, \
- struct ipmi_cmdspec_chans)
-/*
- * Unregister some netfn/cmd/chans. error values:
- * - EFAULT - an address supplied was invalid.
- * - ENOENT - None of the netfn/cmd/chans were found registered for this user.
- */
-#define IPMICTL_UNREGISTER_FOR_CMD_CHANS _IOR(IPMI_IOC_MAGIC, 29, \
- struct ipmi_cmdspec_chans)
-
-/*
- * Set whether this interface receives events. Note that the first
- * user registered for events will get all pending events for the
- * interface. error values:
- * - EFAULT - an address supplied was invalid.
- */
-#define IPMICTL_SET_GETS_EVENTS_CMD _IOR(IPMI_IOC_MAGIC, 16, int)
-
-/*
- * Set and get the slave address and LUN that we will use for our
- * source messages. Note that this affects the interface, not just
- * this user, so it will affect all users of this interface. This is
- * so some initialization code can come in and do the OEM-specific
- * things it takes to determine your address (if not the BMC) and set
- * it for everyone else. You should probably leave the LUN alone.
- */
-struct ipmi_channel_lun_address_set {
- unsigned short channel;
- unsigned char value;
-};
-#define IPMICTL_SET_MY_CHANNEL_ADDRESS_CMD \
- _IOR(IPMI_IOC_MAGIC, 24, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_ADDRESS_CMD \
- _IOR(IPMI_IOC_MAGIC, 25, struct ipmi_channel_lun_address_set)
-#define IPMICTL_SET_MY_CHANNEL_LUN_CMD \
- _IOR(IPMI_IOC_MAGIC, 26, struct ipmi_channel_lun_address_set)
-#define IPMICTL_GET_MY_CHANNEL_LUN_CMD \
- _IOR(IPMI_IOC_MAGIC, 27, struct ipmi_channel_lun_address_set)
-/* Legacy interfaces, these only set IPMB 0. */
-#define IPMICTL_SET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 17, unsigned int)
-#define IPMICTL_GET_MY_ADDRESS_CMD _IOR(IPMI_IOC_MAGIC, 18, unsigned int)
-#define IPMICTL_SET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 19, unsigned int)
-#define IPMICTL_GET_MY_LUN_CMD _IOR(IPMI_IOC_MAGIC, 20, unsigned int)
-
-/*
- * Get/set the default timing values for an interface. You shouldn't
- * generally mess with these.
- */
-struct ipmi_timing_parms {
- int retries;
- unsigned int retry_time_ms;
-};
-#define IPMICTL_SET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 22, \
- struct ipmi_timing_parms)
-#define IPMICTL_GET_TIMING_PARMS_CMD _IOR(IPMI_IOC_MAGIC, 23, \
- struct ipmi_timing_parms)
-
-/*
- * Set the maintenance mode. See ipmi_set_maintenance_mode() above
- * for a description of what this does.
- */
-#define IPMICTL_GET_MAINTENANCE_MODE_CMD _IOR(IPMI_IOC_MAGIC, 30, int)
-#define IPMICTL_SET_MAINTENANCE_MODE_CMD _IOW(IPMI_IOC_MAGIC, 31, int)
-
#endif /* __LINUX_IPMI_H */