summaryrefslogtreecommitdiff
path: root/include/linux/mfd/tmio.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mfd/tmio.h')
-rw-r--r--include/linux/mfd/tmio.h35
1 files changed, 17 insertions, 18 deletions
diff --git a/include/linux/mfd/tmio.h b/include/linux/mfd/tmio.h
index a1520d88ebf3..26e8f8c0a6db 100644
--- a/include/linux/mfd/tmio.h
+++ b/include/linux/mfd/tmio.h
@@ -13,15 +13,15 @@
#define tmio_ioread16(addr) readw(addr)
#define tmio_ioread16_rep(r, b, l) readsw(r, b, l)
#define tmio_ioread32(addr) \
- (((u32) readw((addr))) | (((u32) readw((addr) + 2)) << 16))
+ (((u32)readw((addr))) | (((u32)readw((addr) + 2)) << 16))
#define tmio_iowrite8(val, addr) writeb((val), (addr))
#define tmio_iowrite16(val, addr) writew((val), (addr))
#define tmio_iowrite16_rep(r, b, l) writesw(r, b, l)
#define tmio_iowrite32(val, addr) \
do { \
- writew((val), (addr)); \
- writew((val) >> 16, (addr) + 2); \
+ writew((val), (addr)); \
+ writew((val) >> 16, (addr) + 2); \
} while (0)
#define CNF_CMD 0x04
@@ -55,57 +55,57 @@
} while (0)
/* tmio MMC platform flags */
-#define TMIO_MMC_WRPROTECT_DISABLE (1 << 0)
+#define TMIO_MMC_WRPROTECT_DISABLE BIT(0)
/*
* Some controllers can support a 2-byte block size when the bus width
* is configured in 4-bit mode.
*/
-#define TMIO_MMC_BLKSZ_2BYTES (1 << 1)
+#define TMIO_MMC_BLKSZ_2BYTES BIT(1)
/*
* Some controllers can support SDIO IRQ signalling.
*/
-#define TMIO_MMC_SDIO_IRQ (1 << 2)
+#define TMIO_MMC_SDIO_IRQ BIT(2)
-/* Some features are only available or tested on RCar Gen2 or later */
-#define TMIO_MMC_MIN_RCAR2 (1 << 3)
+/* Some features are only available or tested on R-Car Gen2 or later */
+#define TMIO_MMC_MIN_RCAR2 BIT(3)
/*
* Some controllers require waiting for the SD bus to become
* idle before writing to some registers.
*/
-#define TMIO_MMC_HAS_IDLE_WAIT (1 << 4)
+#define TMIO_MMC_HAS_IDLE_WAIT BIT(4)
/*
* A GPIO is used for card hotplug detection. We need an extra flag for this,
* because 0 is a valid GPIO number too, and requiring users to specify
* cd_gpio < 0 to disable GPIO hotplug would break backwards compatibility.
*/
-#define TMIO_MMC_USE_GPIO_CD (1 << 5)
+#define TMIO_MMC_USE_GPIO_CD BIT(5)
/*
* Some controllers doesn't have over 0x100 register.
* it is used to checking accessibility of
* CTL_SD_CARD_CLK_CTL / CTL_CLK_AND_WAIT_CTL
*/
-#define TMIO_MMC_HAVE_HIGH_REG (1 << 6)
+#define TMIO_MMC_HAVE_HIGH_REG BIT(6)
/*
* Some controllers have CMD12 automatically
* issue/non-issue register
*/
-#define TMIO_MMC_HAVE_CMD12_CTRL (1 << 7)
+#define TMIO_MMC_HAVE_CMD12_CTRL BIT(7)
/* Controller has some SDIO status bits which must be 1 */
-#define TMIO_MMC_SDIO_STATUS_SETBITS (1 << 8)
+#define TMIO_MMC_SDIO_STATUS_SETBITS BIT(8)
/*
* Some controllers have a 32-bit wide data port register
*/
-#define TMIO_MMC_32BIT_DATA_PORT (1 << 9)
+#define TMIO_MMC_32BIT_DATA_PORT BIT(9)
/*
* Some controllers allows to set SDx actual clock
*/
-#define TMIO_MMC_CLK_ACTUAL (1 << 10)
+#define TMIO_MMC_CLK_ACTUAL BIT(10)
int tmio_core_mmc_enable(void __iomem *cnf, int shift, unsigned long base);
int tmio_core_mmc_resume(void __iomem *cnf, int shift, unsigned long base);
@@ -146,9 +146,9 @@ struct tmio_nand_data {
struct tmio_fb_data {
int (*lcd_set_power)(struct platform_device *fb_dev,
- bool on);
+ bool on);
int (*lcd_mode)(struct platform_device *fb_dev,
- const struct fb_videomode *mode);
+ const struct fb_videomode *mode);
int num_modes;
struct fb_videomode *modes;
@@ -157,5 +157,4 @@ struct tmio_fb_data {
int width;
};
-
#endif