diff options
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/dbx500-prcmu.h | 70 | ||||
| -rw-r--r-- | include/linux/mfd/syscon/imx6q-iomuxc-gpr.h | 5 | ||||
| -rw-r--r-- | include/linux/mfd/ti_am335x_tscadc.h | 9 |
3 files changed, 16 insertions, 68 deletions
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h index ca0790fba2f5..060e11256fbc 100644 --- a/include/linux/mfd/dbx500-prcmu.h +++ b/include/linux/mfd/dbx500-prcmu.h @@ -12,6 +12,8 @@ #include <linux/notifier.h> #include <linux/err.h> +#include <dt-bindings/mfd/dbx500-prcmu.h> /* For clock identifiers */ + /* Offset for the firmware version within the TCPM */ #define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4 #define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8 @@ -94,74 +96,6 @@ enum prcmu_wakeup_index { #define PRCMU_CLKSRC_ARMCLKFIX 0x46 #define PRCMU_CLKSRC_HDMICLK 0x47 -/* - * Clock identifiers. - */ -enum prcmu_clock { - PRCMU_SGACLK, - PRCMU_UARTCLK, - PRCMU_MSP02CLK, - PRCMU_MSP1CLK, - PRCMU_I2CCLK, - PRCMU_SDMMCCLK, - PRCMU_SPARE1CLK, - PRCMU_SLIMCLK, - PRCMU_PER1CLK, - PRCMU_PER2CLK, - PRCMU_PER3CLK, - PRCMU_PER5CLK, - PRCMU_PER6CLK, - PRCMU_PER7CLK, - PRCMU_LCDCLK, - PRCMU_BMLCLK, - PRCMU_HSITXCLK, - PRCMU_HSIRXCLK, - PRCMU_HDMICLK, - PRCMU_APEATCLK, - PRCMU_APETRACECLK, - PRCMU_MCDECLK, - PRCMU_IPI2CCLK, - PRCMU_DSIALTCLK, - PRCMU_DMACLK, - PRCMU_B2R2CLK, - PRCMU_TVCLK, - PRCMU_SSPCLK, - PRCMU_RNGCLK, - PRCMU_UICCCLK, - PRCMU_PWMCLK, - PRCMU_IRDACLK, - PRCMU_IRRCCLK, - PRCMU_SIACLK, - PRCMU_SVACLK, - PRCMU_ACLK, - PRCMU_HVACLK, /* Ux540 only */ - PRCMU_G1CLK, /* Ux540 only */ - PRCMU_SDMMCHCLK, - PRCMU_CAMCLK, - PRCMU_BML8580CLK, - PRCMU_NUM_REG_CLOCKS, - PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS, - PRCMU_CDCLK, - PRCMU_TIMCLK, - PRCMU_PLLSOC0, - PRCMU_PLLSOC1, - PRCMU_ARMSS, - PRCMU_PLLDDR, - PRCMU_PLLDSI, - PRCMU_DSI0CLK, - PRCMU_DSI1CLK, - PRCMU_DSI0ESCCLK, - PRCMU_DSI1ESCCLK, - PRCMU_DSI2ESCCLK, - /* LCD DSI PLL - Ux540 only */ - PRCMU_PLLDSI_LCD, - PRCMU_DSI0CLK_LCD, - PRCMU_DSI1CLK_LCD, - PRCMU_DSI0ESCCLK_LCD, - PRCMU_DSI1ESCCLK_LCD, - PRCMU_DSI2ESCCLK_LCD, -}; - /** * enum prcmu_wdog_id - PRCMU watchdog IDs * @PRCMU_WDOG_ALL: use all timers diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index b6bdcd66c07d..7086b2248c8f 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -363,4 +363,9 @@ #define IMX6Q_GPR13_SATA_TX_LVL_1_240_V (0x1f << 2) #define IMX6Q_GPR13_SATA_MPLL_CLK_EN BIT(1) #define IMX6Q_GPR13_SATA_TX_EDGE_RATE BIT(0) + +/* For imx6sl iomux gpr register field define */ +#define IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17) +#define IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14) + #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h index 25f2c611ab01..08cce7f96ab9 100644 --- a/include/linux/mfd/ti_am335x_tscadc.h +++ b/include/linux/mfd/ti_am335x_tscadc.h @@ -46,16 +46,24 @@ /* Step Enable */ #define STEPENB_MASK (0x1FFFF << 0) #define STEPENB(val) ((val) << 0) +#define ENB(val) (1 << (val)) +#define STPENB_STEPENB STEPENB(0x1FFFF) +#define STPENB_STEPENB_TC STEPENB(0x1FFF) /* IRQ enable */ #define IRQENB_HW_PEN BIT(0) #define IRQENB_FIFO0THRES BIT(2) +#define IRQENB_FIFO0OVRRUN BIT(3) +#define IRQENB_FIFO0UNDRFLW BIT(4) #define IRQENB_FIFO1THRES BIT(5) +#define IRQENB_FIFO1OVRRUN BIT(6) +#define IRQENB_FIFO1UNDRFLW BIT(7) #define IRQENB_PENUP BIT(9) /* Step Configuration */ #define STEPCONFIG_MODE_MASK (3 << 0) #define STEPCONFIG_MODE(val) ((val) << 0) +#define STEPCONFIG_MODE_SWCNT STEPCONFIG_MODE(1) #define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2) #define STEPCONFIG_AVG_MASK (7 << 2) #define STEPCONFIG_AVG(val) ((val) << 2) @@ -123,6 +131,7 @@ #define ADC_CLK 3000000 #define TOTAL_STEPS 16 #define TOTAL_CHANNELS 8 +#define FIFO1_THRESHOLD 19 /* * ADC runs at 3MHz, and it takes |