summaryrefslogtreecommitdiff
path: root/include/linux/mtd/fsmc.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mtd/fsmc.h')
-rw-r--r--include/linux/mtd/fsmc.h181
1 files changed, 181 insertions, 0 deletions
diff --git a/include/linux/mtd/fsmc.h b/include/linux/mtd/fsmc.h
new file mode 100644
index 000000000000..5d2556700ec2
--- /dev/null
+++ b/include/linux/mtd/fsmc.h
@@ -0,0 +1,181 @@
+/*
+ * incude/mtd/fsmc.h
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * platform data interface and header file
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __MTD_FSMC_H
+#define __MTD_FSMC_H
+
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/types.h>
+#include <linux/mtd/partitions.h>
+#include <asm/param.h>
+
+#define FSMC_NAND_BW8 1
+#define FSMC_NAND_BW16 2
+
+/*
+ * The placement of the Command Latch Enable (CLE) and
+ * Address Latch Enable (ALE) is twised around in the
+ * SPEAR310 implementation.
+ */
+#if defined(CONFIG_MACH_SPEAR310)
+#define PLAT_NAND_CLE (1 << 17)
+#define PLAT_NAND_ALE (1 << 16)
+#else
+#define PLAT_NAND_CLE (1 << 16)
+#define PLAT_NAND_ALE (1 << 17)
+#endif
+
+#define FSMC_MAX_NOR_BANKS 4
+#define FSMC_MAX_NAND_BANKS 4
+
+#define FSMC_FLASH_WIDTH8 1
+#define FSMC_FLASH_WIDTH16 2
+
+struct fsmc_nor_bank_regs {
+ uint32_t ctrl;
+ uint32_t ctrl_tim;
+};
+
+/* ctrl register definitions */
+#define BANK_ENABLE (1 << 0)
+#define MUXED (1 << 1)
+#define NOR_DEV (2 << 2)
+#define WIDTH_8 (0 << 4)
+#define WIDTH_16 (1 << 4)
+#define RSTPWRDWN (1 << 6)
+#define WPROT (1 << 7)
+#define WRT_ENABLE (1 << 12)
+#define WAIT_ENB (1 << 13)
+
+/* ctrl_tim register definitions */
+
+struct fsms_nand_bank_regs {
+ uint32_t pc;
+ uint32_t sts;
+ uint32_t comm;
+ uint32_t attrib;
+ uint32_t ioata;
+ uint32_t ecc1;
+ uint32_t ecc2;
+ uint32_t ecc3;
+};
+
+#define FSMC_NOR_REG_SIZE 0x40
+
+struct fsmc_regs {
+ struct fsmc_nor_bank_regs nor_bank_regs[FSMC_MAX_NOR_BANKS];
+ uint8_t reserved_1[0x40 - 0x20];
+ struct fsms_nand_bank_regs bank_regs[FSMC_MAX_NAND_BANKS];
+ uint8_t reserved_2[0xfe0 - 0xc0];
+ uint32_t peripid0; /* 0xfe0 */
+ uint32_t peripid1; /* 0xfe4 */
+ uint32_t peripid2; /* 0xfe8 */
+ uint32_t peripid3; /* 0xfec */
+ uint32_t pcellid0; /* 0xff0 */
+ uint32_t pcellid1; /* 0xff4 */
+ uint32_t pcellid2; /* 0xff8 */
+ uint32_t pcellid3; /* 0xffc */
+};
+
+#define FSMC_BUSY_WAIT_TIMEOUT (1 * HZ)
+
+/* pc register definitions */
+#define FSMC_RESET (1 << 0)
+#define FSMC_WAITON (1 << 1)
+#define FSMC_ENABLE (1 << 2)
+#define FSMC_DEVTYPE_NAND (1 << 3)
+#define FSMC_DEVWID_8 (0 << 4)
+#define FSMC_DEVWID_16 (1 << 4)
+#define FSMC_ECCEN (1 << 6)
+#define FSMC_ECCPLEN_512 (0 << 7)
+#define FSMC_ECCPLEN_256 (1 << 7)
+#define FSMC_TCLR_1 (1 << 9)
+#define FSMC_TAR_1 (1 << 13)
+
+/* sts register definitions */
+#define FSMC_CODE_RDY (1 << 15)
+
+/* comm register definitions */
+#define FSMC_TSET_0 (0 << 0)
+#define FSMC_TWAIT_6 (6 << 8)
+#define FSMC_THOLD_4 (4 << 16)
+#define FSMC_THIZ_1 (1 << 24)
+
+/* peripid2 register definitions */
+#define FSMC_REVISION_MSK (0xf)
+#define FSMC_REVISION_SHFT (0x4)
+
+#define FSMC_VER1 1
+#define FSMC_VER2 2
+#define FSMC_VER3 3
+#define FSMC_VER4 4
+#define FSMC_VER5 5
+#define FSMC_VER6 6
+#define FSMC_VER7 7
+#define FSMC_VER8 8
+
+static inline uint32_t get_fsmc_version(struct fsmc_regs *regs)
+{
+ return (readl(&regs->peripid2) >> FSMC_REVISION_SHFT) &
+ FSMC_REVISION_MSK;
+}
+
+/*
+ * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
+ * and it has to be read consecutively and immediately after the 512
+ * byte data block for hardware to generate the error bit offsets
+ * Managing the ecc bytes in the following way is easier. This way is
+ * similar to oobfree structure maintained already in u-boot nand driver
+ */
+#define MAX_ECCPLACE_ENTRIES 32
+
+struct fsmc_nand_eccplace {
+ uint8_t offset;
+ uint8_t length;
+};
+
+struct fsmc_eccplace {
+ struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
+};
+
+/**
+ * fsmc_nand_platform_data - platform specific NAND controller config
+ * @partitions: partition table for the platform, use a default fallback
+ * if this is NULL
+ * @nr_partitions: the number of partitions in the previous entry
+ * @options: different options for the driver
+ * @width: bus width
+ * @bank: default bank
+ * @select_bank: callback to select a certain bank, this is
+ * platform-specific. If the controller only supports one bank
+ * this may be set to NULL
+ */
+struct fsmc_nand_platform_data {
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+ unsigned int options;
+ unsigned int width;
+ unsigned int bank;
+ void (*select_bank)(uint32_t bank, uint32_t busw);
+};
+
+extern int __init fsmc_nor_init(struct platform_device *pdev,
+ unsigned long base, uint32_t bank, uint32_t width);
+extern void __init fsmc_init_board_info(struct platform_device *pdev,
+ struct mtd_partition *partitions, unsigned int nr_partitions,
+ unsigned int width);
+
+#endif /* __MTD_FSMC_H */