diff options
Diffstat (limited to 'include/linux/mtd/nand.h')
| -rw-r--r-- | include/linux/mtd/nand.h | 188 |
1 files changed, 182 insertions, 6 deletions
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index af99041ceaa9..697ea2474a7c 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -83,7 +83,18 @@ struct nand_pos { }; /** + * enum nand_page_io_req_type - Direction of an I/O request + * @NAND_PAGE_READ: from the chip, to the controller + * @NAND_PAGE_WRITE: from the controller, to the chip + */ +enum nand_page_io_req_type { + NAND_PAGE_READ = 0, + NAND_PAGE_WRITE, +}; + +/** * struct nand_page_io_req - NAND I/O request object + * @type: the type of page I/O: read or write * @pos: the position this I/O request is targeting * @dataoffs: the offset within the page * @datalen: number of data bytes to read from/write to this page @@ -99,6 +110,7 @@ struct nand_pos { * specific commands/operations. */ struct nand_page_io_req { + enum nand_page_io_req_type type; struct nand_pos pos; unsigned int dataoffs; unsigned int datalen; @@ -115,18 +127,77 @@ struct nand_page_io_req { int mode; }; +const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void); +const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void); +const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void); + +/** + * enum nand_ecc_engine_type - NAND ECC engine type + * @NAND_ECC_ENGINE_TYPE_INVALID: Invalid value + * @NAND_ECC_ENGINE_TYPE_NONE: No ECC correction + * @NAND_ECC_ENGINE_TYPE_SOFT: Software ECC correction + * @NAND_ECC_ENGINE_TYPE_ON_HOST: On host hardware ECC correction + * @NAND_ECC_ENGINE_TYPE_ON_DIE: On chip hardware ECC correction + */ +enum nand_ecc_engine_type { + NAND_ECC_ENGINE_TYPE_INVALID, + NAND_ECC_ENGINE_TYPE_NONE, + NAND_ECC_ENGINE_TYPE_SOFT, + NAND_ECC_ENGINE_TYPE_ON_HOST, + NAND_ECC_ENGINE_TYPE_ON_DIE, +}; + +/** + * enum nand_ecc_placement - NAND ECC bytes placement + * @NAND_ECC_PLACEMENT_UNKNOWN: The actual position of the ECC bytes is unknown + * @NAND_ECC_PLACEMENT_OOB: The ECC bytes are located in the OOB area + * @NAND_ECC_PLACEMENT_INTERLEAVED: Syndrome layout, there are ECC bytes + * interleaved with regular data in the main + * area + */ +enum nand_ecc_placement { + NAND_ECC_PLACEMENT_UNKNOWN, + NAND_ECC_PLACEMENT_OOB, + NAND_ECC_PLACEMENT_INTERLEAVED, +}; + +/** + * enum nand_ecc_algo - NAND ECC algorithm + * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm + * @NAND_ECC_ALGO_HAMMING: Hamming algorithm + * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm + * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm + */ +enum nand_ecc_algo { + NAND_ECC_ALGO_UNKNOWN, + NAND_ECC_ALGO_HAMMING, + NAND_ECC_ALGO_BCH, + NAND_ECC_ALGO_RS, +}; + /** * struct nand_ecc_props - NAND ECC properties + * @engine_type: ECC engine type + * @placement: OOB placement (if relevant) + * @algo: ECC algorithm (if relevant) * @strength: ECC strength * @step_size: Number of bytes per step + * @flags: Misc properties */ struct nand_ecc_props { + enum nand_ecc_engine_type engine_type; + enum nand_ecc_placement placement; + enum nand_ecc_algo algo; unsigned int strength; unsigned int step_size; + unsigned int flags; }; #define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) } +/* NAND ECC misc flags */ +#define NAND_ECC_MAXIMIZE_STRENGTH BIT(0) + /** * struct nand_bbt - bad block table object * @cache: in memory BBT cache @@ -158,10 +229,79 @@ struct nand_ops { }; /** + * struct nand_ecc_context - Context for the ECC engine + * @conf: basic ECC engine parameters + * @total: total number of bytes used for storing ECC codes, this is used by + * generic OOB layouts + * @priv: ECC engine driver private data + */ +struct nand_ecc_context { + struct nand_ecc_props conf; + unsigned int total; + void *priv; +}; + +/** + * struct nand_ecc_engine_ops - ECC engine operations + * @init_ctx: given a desired user configuration for the pointed NAND device, + * requests the ECC engine driver to setup a configuration with + * values it supports. + * @cleanup_ctx: clean the context initialized by @init_ctx. + * @prepare_io_req: is called before reading/writing a page to prepare the I/O + * request to be performed with ECC correction. + * @finish_io_req: is called after reading/writing a page to terminate the I/O + * request and ensure proper ECC correction. + */ +struct nand_ecc_engine_ops { + int (*init_ctx)(struct nand_device *nand); + void (*cleanup_ctx)(struct nand_device *nand); + int (*prepare_io_req)(struct nand_device *nand, + struct nand_page_io_req *req); + int (*finish_io_req)(struct nand_device *nand, + struct nand_page_io_req *req); +}; + +/** + * struct nand_ecc_engine - ECC engine abstraction for NAND devices + * @ops: ECC engine operations + */ +struct nand_ecc_engine { + struct nand_ecc_engine_ops *ops; +}; + +void of_get_nand_ecc_user_config(struct nand_device *nand); +int nand_ecc_init_ctx(struct nand_device *nand); +void nand_ecc_cleanup_ctx(struct nand_device *nand); +int nand_ecc_prepare_io_req(struct nand_device *nand, + struct nand_page_io_req *req); +int nand_ecc_finish_io_req(struct nand_device *nand, + struct nand_page_io_req *req); +bool nand_ecc_is_strong_enough(struct nand_device *nand); + +/** + * struct nand_ecc - Information relative to the ECC + * @defaults: Default values, depend on the underlying subsystem + * @requirements: ECC requirements from the NAND chip perspective + * @user_conf: User desires in terms of ECC parameters + * @ctx: ECC context for the ECC engine, derived from the device @requirements + * the @user_conf and the @defaults + * @ondie_engine: On-die ECC engine reference, if any + * @engine: ECC engine actually bound + */ +struct nand_ecc { + struct nand_ecc_props defaults; + struct nand_ecc_props requirements; + struct nand_ecc_props user_conf; + struct nand_ecc_context ctx; + struct nand_ecc_engine *ondie_engine; + struct nand_ecc_engine *engine; +}; + +/** * struct nand_device - NAND device * @mtd: MTD instance attached to the NAND device * @memorg: memory layout - * @eccreq: ECC requirements + * @ecc: NAND ECC object attached to the NAND device * @rowconv: position to row address converter * @bbt: bad block table info * @ops: NAND operations attached to the NAND device @@ -169,8 +309,8 @@ struct nand_ops { * Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND) * should declare their own NAND object embedding a nand_device struct (that's * how inheritance is done). - * struct_nand_device->memorg and struct_nand_device->eccreq should be filled - * at device detection time to reflect the NAND device + * struct_nand_device->memorg and struct_nand_device->ecc.requirements should + * be filled at device detection time to reflect the NAND device * capabilities/requirements. Once this is done nanddev_init() can be called. * It will take care of converting NAND information into MTD ones, which means * the specialized NAND layers should never manually tweak @@ -179,7 +319,7 @@ struct nand_ops { struct nand_device { struct mtd_info mtd; struct nand_memory_organization memorg; - struct nand_ecc_props eccreq; + struct nand_ecc ecc; struct nand_row_converter rowconv; struct nand_bbt bbt; const struct nand_ops *ops; @@ -383,6 +523,40 @@ nanddev_get_memorg(struct nand_device *nand) return &nand->memorg; } +/** + * nanddev_get_ecc_conf() - Extract the ECC configuration from a NAND device + * @nand: NAND device + */ +static inline const struct nand_ecc_props * +nanddev_get_ecc_conf(struct nand_device *nand) +{ + return &nand->ecc.ctx.conf; +} + +/** + * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND + * device + * @nand: NAND device + */ +static inline const struct nand_ecc_props * +nanddev_get_ecc_requirements(struct nand_device *nand) +{ + return &nand->ecc.requirements; +} + +/** + * nanddev_set_ecc_requirements() - Assign the ECC requirements of a NAND + * device + * @nand: NAND device + * @reqs: Requirements + */ +static inline void +nanddev_set_ecc_requirements(struct nand_device *nand, + const struct nand_ecc_props *reqs) +{ + nand->ecc.requirements = *reqs; +} + int nanddev_init(struct nand_device *nand, const struct nand_ops *ops, struct module *owner); void nanddev_cleanup(struct nand_device *nand); @@ -624,11 +798,13 @@ static inline void nanddev_pos_next_page(struct nand_device *nand, * layer. */ static inline void nanddev_io_iter_init(struct nand_device *nand, + enum nand_page_io_req_type reqtype, loff_t offs, struct mtd_oob_ops *req, struct nand_io_iter *iter) { struct mtd_info *mtd = nanddev_to_mtd(nand); + iter->req.type = reqtype; iter->req.mode = req->mode; iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos); iter->req.ooboffs = req->ooboffs; @@ -698,8 +874,8 @@ static inline bool nanddev_io_iter_end(struct nand_device *nand, * * Should be used for iterate over pages that are contained in an MTD request. */ -#define nanddev_io_for_each_page(nand, start, req, iter) \ - for (nanddev_io_iter_init(nand, start, req, iter); \ +#define nanddev_io_for_each_page(nand, type, start, req, iter) \ + for (nanddev_io_iter_init(nand, type, start, req, iter); \ !nanddev_io_iter_end(nand, iter); \ nanddev_io_iter_next_page(nand, iter)) |