summaryrefslogtreecommitdiff
path: root/include/linux/mtd/sh_flctl.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/mtd/sh_flctl.h')
-rw-r--r--include/linux/mtd/sh_flctl.h40
1 files changed, 40 insertions, 0 deletions
diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h
index 9cf4c4c79555..a38e1fa8af01 100644
--- a/include/linux/mtd/sh_flctl.h
+++ b/include/linux/mtd/sh_flctl.h
@@ -23,6 +23,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/pm_qos.h>
/* FLCTL registers */
#define FLCMNCR(f) (f->reg + 0x0)
@@ -38,6 +39,7 @@
#define FLDTFIFO(f) (f->reg + 0x24)
#define FLECFIFO(f) (f->reg + 0x28)
#define FLTRCR(f) (f->reg + 0x2C)
+#define FLHOLDCR(f) (f->reg + 0x38)
#define FL4ECCRESULT0(f) (f->reg + 0x80)
#define FL4ECCRESULT1(f) (f->reg + 0x84)
#define FL4ECCRESULT2(f) (f->reg + 0x88)
@@ -67,6 +69,30 @@
#define CE0_ENABLE (0x1 << 3) /* Chip Enable 0 */
#define TYPESEL_SET (0x1 << 0)
+/*
+ * Clock settings using the PULSEx registers from FLCMNCR
+ *
+ * Some hardware uses bits called PULSEx instead of FCKSEL_E and QTSEL_E
+ * to control the clock divider used between the High-Speed Peripheral Clock
+ * and the FLCTL internal clock. If so, use CLK_8_BIT_xxx for connecting 8 bit
+ * and CLK_16_BIT_xxx for connecting 16 bit bus bandwith NAND chips. For the 16
+ * bit version the divider is seperate for the pulse width of high and low
+ * signals.
+ */
+#define PULSE3 (0x1 << 27)
+#define PULSE2 (0x1 << 17)
+#define PULSE1 (0x1 << 15)
+#define PULSE0 (0x1 << 9)
+#define CLK_8B_0_5 PULSE1
+#define CLK_8B_1 0x0
+#define CLK_8B_1_5 (PULSE1 | PULSE2)
+#define CLK_8B_2 PULSE0
+#define CLK_8B_3 (PULSE0 | PULSE1 | PULSE2)
+#define CLK_8B_4 (PULSE0 | PULSE2)
+#define CLK_16B_6L_2H PULSE0
+#define CLK_16B_9L_3H (PULSE0 | PULSE1 | PULSE2)
+#define CLK_16B_12L_4H (PULSE0 | PULSE2)
+
/* FLCMDCR control bits */
#define ADRCNT2_E (0x1 << 31) /* 5byte address enable */
#define ADRMD_E (0x1 << 26) /* Sector address access */
@@ -85,6 +111,15 @@
#define TRSTRT (0x1 << 0) /* translation start */
#define TREND (0x1 << 1) /* translation end */
+/*
+ * FLHOLDCR control bits
+ *
+ * HOLDEN: Bus Occupancy Enable (inverted)
+ * Enable this bit when the external bus might be used in between transfers.
+ * If not set and the bus gets used by other modules, a deadlock occurs.
+ */
+#define HOLDEN (0x1 << 0)
+
/* FL4ECCCR control bits */
#define _4ECCFA (0x1 << 2) /* 4 symbols correct fault */
#define _4ECCEND (0x1 << 1) /* 4 symbols end */
@@ -97,6 +132,7 @@ struct sh_flctl {
struct mtd_info mtd;
struct nand_chip chip;
struct platform_device *pdev;
+ struct dev_pm_qos_request pm_qos;
void __iomem *reg;
uint8_t done_buff[2048 + 64]; /* max size 2048 + 64 */
@@ -108,11 +144,14 @@ struct sh_flctl {
int erase1_page_addr; /* page_addr in ERASE1 cmd */
uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */
uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */
+ uint32_t flcmncr_base; /* base value of FLCMNCR */
int hwecc_cant_correct[4];
unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */
unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */
+ unsigned holden:1; /* Hardware has FLHOLDCR and HOLDEN is set */
+ unsigned qos_request:1; /* QoS request to prevent deep power shutdown */
};
struct sh_flctl_platform_data {
@@ -121,6 +160,7 @@ struct sh_flctl_platform_data {
unsigned long flcmncr_val;
unsigned has_hwecc:1;
+ unsigned use_holden:1;
};
static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)