diff options
Diffstat (limited to 'include/linux/phy.h')
| -rw-r--r-- | include/linux/phy.h | 45 |
1 files changed, 44 insertions, 1 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index 684efaeca07c..ded6ce314710 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -638,7 +638,7 @@ struct phy_device { /* Information about the PHY type */ /* And management functions */ - struct phy_driver *drv; + const struct phy_driver *drv; struct device_link *devlink; @@ -691,6 +691,15 @@ struct phy_device { u8 master_slave_set; u8 master_slave_state; + /* + * private to phylib: the resolved pause state - only valid if + * resolved_pause_valid is true. only phy drivers and phylib + * should touch this. + */ + bool resolved_pause_valid; + bool resolved_tx_pause; + bool resolved_rx_pause; + /* Union of PHY and Attached devices' supported link modes */ /* See ethtool.h for more info */ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported); @@ -706,6 +715,9 @@ struct phy_device { /* Host supported PHY interface types. Should be ignored if empty. */ DECLARE_PHY_INTERFACE_MASK(host_interfaces); + /* supported PHY interface types */ + DECLARE_PHY_INTERFACE_MASK(supported_interfaces); + /* Energy efficient ethernet modes which should be prohibited */ u32 eee_broken_modes; @@ -796,6 +808,24 @@ struct phy_tdr_config { #define PHY_PAIR_ALL -1 /** + * enum link_inband_signalling - inband signalling modes that are supported + * + * @LINK_INBAND_VALID: inband signalling report is valid + * @LINK_INBAND_POSSIBLE: inband signalling can be used + * @LINK_INBAND_REQUIRED: inband signalling is required + * + * The possible and required bits can only be used if the valid bit is set. + * If possible is clear, that means inband signalling can not be used. + * Required is only valid when possible is set, and means that inband + * signalling must be used. + */ +enum link_inband_signalling { + LINK_INBAND_VALID = BIT(0), + LINK_INBAND_POSSIBLE = BIT(1), + LINK_INBAND_REQUIRED = BIT(2), +}; + +/** * struct phy_plca_cfg - Configuration of the PLCA (Physical Layer Collision * Avoidance) Reconciliation Sublayer. * @@ -925,6 +955,14 @@ struct phy_driver { int (*get_features)(struct phy_device *phydev); /** + * @query_inband: query whether inband is supported for the given PHY + * interface mode. Returns a bitmask of bits defined by enum + * link_inband_signalling. + */ + unsigned int (*query_inband)(struct phy_device *phydev, + phy_interface_t interface); + + /** * @get_rate_matching: Get the supported type of rate matching for a * particular phy interface. This is used by phy consumers to determine * whether to advertise lower-speed modes for that interface. It is @@ -942,6 +980,9 @@ struct phy_driver { /** @resume: Resume the hardware, restoring state if needed */ int (*resume)(struct phy_device *phydev); + int (*start)(struct phy_device *phydev); + void (*stop)(struct phy_device *phydev); + /** * @config_aneg: Configures the advertisement and resets * autonegotiation if phydev->autoneg is on, @@ -1744,6 +1785,8 @@ int phy_config_aneg(struct phy_device *phydev); int _phy_start_aneg(struct phy_device *phydev); int phy_start_aneg(struct phy_device *phydev); int phy_aneg_done(struct phy_device *phydev); +unsigned int phy_query_inband(struct phy_device *phydev, + phy_interface_t interface); int phy_speed_down(struct phy_device *phydev, bool sync); int phy_speed_up(struct phy_device *phydev); bool phy_check_valid(int speed, int duplex, unsigned long *features); |