diff options
Diffstat (limited to 'include/linux/phy.h')
| -rw-r--r-- | include/linux/phy.h | 51 |
1 files changed, 37 insertions, 14 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index dc82a07cb4fd..c4b4715caa21 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -59,6 +59,7 @@ #define PHY_HAS_INTERRUPT 0x00000001 #define PHY_IS_INTERNAL 0x00000002 +#define PHY_RST_AFTER_CLK_EN 0x00000004 #define MDIO_DEVICE_IS_PHY 0x80000000 /* Interface Mode definitions */ @@ -468,7 +469,6 @@ struct phy_device { /* Interrupt and Polling infrastructure */ struct work_struct phy_queue; struct delayed_work state_queue; - atomic_t irq_disable; struct mutex lock; @@ -497,19 +497,19 @@ struct phy_device { * flags: A bitfield defining certain other features this PHY * supports (like interrupts) * - * The drivers must implement config_aneg and read_status. All - * other functions are optional. Note that none of these - * functions should be called from interrupt time. The goal is - * for the bus read/write functions to be able to block when the - * bus transaction is happening, and be freed up by an interrupt - * (The MPC85xx has this ability, though it is not currently - * supported in the driver). + * All functions are optional. If config_aneg or read_status + * are not implemented, the phy core uses the genphy versions. + * Note that none of these functions should be called from + * interrupt time. The goal is for the bus read/write functions + * to be able to block when the bus transaction is happening, + * and be freed up by an interrupt (The MPC85xx has this ability, + * though it is not currently supported in the driver). */ struct phy_driver { struct mdio_driver_common mdiodrv; u32 phy_id; char *name; - unsigned int phy_id_mask; + u32 phy_id_mask; u32 features; u32 flags; const void *driver_data; @@ -763,6 +763,20 @@ static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode) }; /** + * phy_interface_mode_is_8023z() - does the phy interface mode use 802.3z + * negotiation + * @mode: one of &enum phy_interface_t + * + * Returns true if the phy interface mode uses the 16-bit negotiation + * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding) + */ +static inline bool phy_interface_mode_is_8023z(phy_interface_t mode) +{ + return mode == PHY_INTERFACE_MODE_1000BASEX || + mode == PHY_INTERFACE_MODE_2500BASEX; +} + +/** * phy_interface_is_rgmii - Convenience function for testing if a PHY interface * is RGMII (all variants) * @phydev: the phy_device struct @@ -840,13 +854,11 @@ int phy_aneg_done(struct phy_device *phydev); int phy_stop_interrupts(struct phy_device *phydev); int phy_restart_aneg(struct phy_device *phydev); +int phy_reset_after_clk_enable(struct phy_device *phydev); -static inline int phy_read_status(struct phy_device *phydev) +static inline void phy_device_reset(struct phy_device *phydev, int value) { - if (!phydev->drv) - return -EIO; - - return phydev->drv->read_status(phydev); + mdio_device_reset(&phydev->mdio, value); } #define phydev_err(_phydev, format, args...) \ @@ -890,6 +902,17 @@ int genphy_c45_read_pma(struct phy_device *phydev); int genphy_c45_pma_setup_forced(struct phy_device *phydev); int genphy_c45_an_disable_aneg(struct phy_device *phydev); +static inline int phy_read_status(struct phy_device *phydev) +{ + if (!phydev->drv) + return -EIO; + + if (phydev->drv->read_status) + return phydev->drv->read_status(phydev); + else + return genphy_read_status(phydev); +} + void phy_driver_unregister(struct phy_driver *drv); void phy_drivers_unregister(struct phy_driver *drv, int n); int phy_driver_register(struct phy_driver *new_driver, struct module *owner); |