diff options
Diffstat (limited to 'include/linux/phylink.h')
| -rw-r--r-- | include/linux/phylink.h | 48 |
1 files changed, 48 insertions, 0 deletions
diff --git a/include/linux/phylink.h b/include/linux/phylink.h index d9913d8e6b91..2f1315f32113 100644 --- a/include/linux/phylink.h +++ b/include/linux/phylink.h @@ -76,7 +76,9 @@ struct phylink_config { * struct phylink_mac_ops - MAC operations structure. * @validate: Validate and update the link configuration. * @mac_pcs_get_state: Read the current link state from the hardware. + * @mac_prepare: prepare for a major reconfiguration of the interface. * @mac_config: configure the MAC for the selected mode and state. + * @mac_finish: finish a major reconfiguration of the interface. * @mac_an_restart: restart 802.3z BaseX autonegotiation. * @mac_link_down: take the link down. * @mac_link_up: allow the link to come up. @@ -89,8 +91,12 @@ struct phylink_mac_ops { struct phylink_link_state *state); void (*mac_pcs_get_state)(struct phylink_config *config, struct phylink_link_state *state); + int (*mac_prepare)(struct phylink_config *config, unsigned int mode, + phy_interface_t iface); void (*mac_config)(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state); + int (*mac_finish)(struct phylink_config *config, unsigned int mode, + phy_interface_t iface); void (*mac_an_restart)(struct phylink_config *config); void (*mac_link_down)(struct phylink_config *config, unsigned int mode, phy_interface_t interface); @@ -146,6 +152,31 @@ void mac_pcs_get_state(struct phylink_config *config, struct phylink_link_state *state); /** + * mac_prepare() - prepare to change the PHY interface mode + * @config: a pointer to a &struct phylink_config. + * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. + * @iface: interface mode to switch to + * + * phylink will call this method at the beginning of a full initialisation + * of the link, which includes changing the interface mode or at initial + * startup time. It may be called for the current mode. The MAC driver + * should perform whatever actions are required, e.g. disabling the + * Serdes PHY. + * + * This will be the first call in the sequence: + * - mac_prepare() + * - mac_config() + * - pcs_config() + * - possible pcs_an_restart() + * - mac_finish() + * + * Returns zero on success, or negative errno on failure which will be + * reported to the kernel log. + */ +int mac_prepare(struct phylink_config *config, unsigned int mode, + phy_interface_t iface); + +/** * mac_config() - configure the MAC for the selected mode and state * @config: a pointer to a &struct phylink_config. * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. @@ -221,6 +252,23 @@ void mac_config(struct phylink_config *config, unsigned int mode, const struct phylink_link_state *state); /** + * mac_finish() - finish a to change the PHY interface mode + * @config: a pointer to a &struct phylink_config. + * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND. + * @iface: interface mode to switch to + * + * phylink will call this if it called mac_prepare() to allow the MAC to + * complete any necessary steps after the MAC and PCS have been configured + * for the @mode and @iface. E.g. a MAC driver may wish to re-enable the + * Serdes PHY here if it was previously disabled by mac_prepare(). + * + * Returns zero on success, or negative errno on failure which will be + * reported to the kernel log. + */ +int mac_finish(struct phylink_config *config, unsigned int mode, + phy_interface_t iface); + +/** * mac_an_restart() - restart 802.3z BaseX autonegotiation * @config: a pointer to a &struct phylink_config. */ |