3 files changed, 15 insertions, 9 deletions

diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h
index 72474e18f1e0..6aa238096622 100644
--- a/include/linux/pinctrl/pinconf-generic.h
+++ b/include/linux/pinctrl/pinconf-generic.h
@@ -37,17 +37,17 @@
  *	if it is 0, pull-down is disabled.
  * @PIN_CONFIG_DRIVE_PUSH_PULL: the pin will be driven actively high and
  *	low, this is the most typical case and is typically achieved with two
- *	active transistors on the output. Sending this config will enabale
+ *	active transistors on the output. Setting this config will enable
  *	push-pull mode, the argument is ignored.
  * @PIN_CONFIG_DRIVE_OPEN_DRAIN: the pin will be driven with open drain (open
  *	collector) which means it is usually wired with other output ports
- *	which are then pulled up with an external resistor. Sending this
- *	config will enabale open drain mode, the argument is ignored.
+ *	which are then pulled up with an external resistor. Setting this
+ *	config will enable open drain mode, the argument is ignored.
  * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source
- *	(open emitter). Sending this config will enabale open drain mode, the
+ *	(open emitter). Setting this config will enable open drain mode, the
  *	argument is ignored.
- * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as
- * 	argument. The argument is in mA.
+ * @PIN_CONFIG_DRIVE_STRENGTH: the pin will sink or source at most the current
+ *	passed as argument. The argument is in mA.
  * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin.
  *      If the argument != 0, schmitt-trigger mode is enabled. If it's 0,
  *      schmitt-trigger mode is disabled.
diff --git a/include/linux/pinctrl/pinconf.h b/include/linux/pinctrl/pinconf.h
index e7a720104a47..1ad4f31ef6b8 100644
--- a/include/linux/pinctrl/pinconf.h
+++ b/include/linux/pinctrl/pinconf.h
@@ -14,6 +14,8 @@
 
 #ifdef CONFIG_PINCONF
 
+#include <linux/pinctrl/machine.h>
+
 struct pinctrl_dev;
 struct seq_file;
 
@@ -28,6 +30,7 @@ struct seq_file;
  * @pin_config_set: configure an individual pin
  * @pin_config_group_get: get configurations for an entire pin group
  * @pin_config_group_set: configure all pins in a group
+ * @pin_config_group_dbg_set: optional debugfs to modify a pin configuration
  * @pin_config_dbg_show: optional debugfs display hook that will provide
  *	per-device info for a certain pin in debugfs
  * @pin_config_group_dbg_show: optional debugfs display hook that will provide
@@ -51,6 +54,9 @@ struct pinconf_ops {
 	int (*pin_config_group_set) (struct pinctrl_dev *pctldev,
 				     unsigned selector,
 				     unsigned long config);
+	int (*pin_config_dbg_parse_modify) (struct pinctrl_dev *pctldev,
+					   const char *arg,
+					   unsigned long *config);
 	void (*pin_config_dbg_show) (struct pinctrl_dev *pctldev,
 				     struct seq_file *s,
 				     unsigned offset);
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 778804df293f..2c2a9e8d8578 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -118,9 +118,9 @@ struct pinctrl_desc {
 	const char *name;
 	struct pinctrl_pin_desc const *pins;
 	unsigned int npins;
-	struct pinctrl_ops *pctlops;
-	struct pinmux_ops *pmxops;
-	struct pinconf_ops *confops;
+	const struct pinctrl_ops *pctlops;
+	const struct pinmux_ops *pmxops;
+	const struct pinconf_ops *confops;
 	struct module *owner;
 };