10 files changed, 148 insertions, 192 deletions
diff --git a/include/linux/platform_data/ad5755.h b/include/linux/platform_data/ad5755.h
deleted file mode 100644
index e371e08f04bc..000000000000
--- a/include/linux/platform_data/ad5755.h
+++ /dev/null
@@ -1,102 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright 2012 Analog Devices Inc.
- */
-#ifndef __LINUX_PLATFORM_DATA_AD5755_H__
-#define __LINUX_PLATFORM_DATA_AD5755_H__
-
-enum ad5755_mode {
-	AD5755_MODE_VOLTAGE_0V_5V		= 0,
-	AD5755_MODE_VOLTAGE_0V_10V		= 1,
-	AD5755_MODE_VOLTAGE_PLUSMINUS_5V	= 2,
-	AD5755_MODE_VOLTAGE_PLUSMINUS_10V	= 3,
-	AD5755_MODE_CURRENT_4mA_20mA		= 4,
-	AD5755_MODE_CURRENT_0mA_20mA		= 5,
-	AD5755_MODE_CURRENT_0mA_24mA		= 6,
-};
-
-enum ad5755_dc_dc_phase {
-	AD5755_DC_DC_PHASE_ALL_SAME_EDGE		= 0,
-	AD5755_DC_DC_PHASE_A_B_SAME_EDGE_C_D_OPP_EDGE	= 1,
-	AD5755_DC_DC_PHASE_A_C_SAME_EDGE_B_D_OPP_EDGE	= 2,
-	AD5755_DC_DC_PHASE_90_DEGREE			= 3,
-};
-
-enum ad5755_dc_dc_freq {
-	AD5755_DC_DC_FREQ_250kHZ = 0,
-	AD5755_DC_DC_FREQ_410kHZ = 1,
-	AD5755_DC_DC_FREQ_650kHZ = 2,
-};
-
-enum ad5755_dc_dc_maxv {
-	AD5755_DC_DC_MAXV_23V	= 0,
-	AD5755_DC_DC_MAXV_24V5	= 1,
-	AD5755_DC_DC_MAXV_27V	= 2,
-	AD5755_DC_DC_MAXV_29V5	= 3,
-};
-
-enum ad5755_slew_rate {
-	AD5755_SLEW_RATE_64k	= 0,
-	AD5755_SLEW_RATE_32k	= 1,
-	AD5755_SLEW_RATE_16k	= 2,
-	AD5755_SLEW_RATE_8k	= 3,
-	AD5755_SLEW_RATE_4k	= 4,
-	AD5755_SLEW_RATE_2k	= 5,
-	AD5755_SLEW_RATE_1k	= 6,
-	AD5755_SLEW_RATE_500	= 7,
-	AD5755_SLEW_RATE_250	= 8,
-	AD5755_SLEW_RATE_125	= 9,
-	AD5755_SLEW_RATE_64	= 10,
-	AD5755_SLEW_RATE_32	= 11,
-	AD5755_SLEW_RATE_16	= 12,
-	AD5755_SLEW_RATE_8	= 13,
-	AD5755_SLEW_RATE_4	= 14,
-	AD5755_SLEW_RATE_0_5	= 15,
-};
-
-enum ad5755_slew_step_size {
-	AD5755_SLEW_STEP_SIZE_1 = 0,
-	AD5755_SLEW_STEP_SIZE_2 = 1,
-	AD5755_SLEW_STEP_SIZE_4 = 2,
-	AD5755_SLEW_STEP_SIZE_8 = 3,
-	AD5755_SLEW_STEP_SIZE_16 = 4,
-	AD5755_SLEW_STEP_SIZE_32 = 5,
-	AD5755_SLEW_STEP_SIZE_64 = 6,
-	AD5755_SLEW_STEP_SIZE_128 = 7,
-	AD5755_SLEW_STEP_SIZE_256 = 8,
-};
-
-/**
- * struct ad5755_platform_data - AD5755 DAC driver platform data
- * @ext_dc_dc_compenstation_resistor: Whether an external DC-DC converter
- * compensation register is used.
- * @dc_dc_phase: DC-DC converter phase.
- * @dc_dc_freq: DC-DC converter frequency.
- * @dc_dc_maxv: DC-DC maximum allowed boost voltage.
- * @dac.mode: The mode to be used for the DAC output.
- * @dac.ext_current_sense_resistor: Whether an external current sense resistor
- * is used.
- * @dac.enable_voltage_overrange: Whether to enable 20% voltage output overrange.
- * @dac.slew.enable: Whether to enable digital slew.
- * @dac.slew.rate: Slew rate of the digital slew.
- * @dac.slew.step_size: Slew step size of the digital slew.
- **/
-struct ad5755_platform_data {
-	bool ext_dc_dc_compenstation_resistor;
-	enum ad5755_dc_dc_phase dc_dc_phase;
-	enum ad5755_dc_dc_freq dc_dc_freq;
-	enum ad5755_dc_dc_maxv dc_dc_maxv;
-
-	struct {
-		enum ad5755_mode mode;
-		bool ext_current_sense_resistor;
-		bool enable_voltage_overrange;
-		struct {
-			bool enable;
-			enum ad5755_slew_rate rate;
-			enum ad5755_slew_step_size step_size;
-		} slew;
-	} dac[4];
-};
-
-#endif
diff --git a/include/linux/platform_data/clk-fch.h b/include/linux/platform_data/clk-fch.h
index b9f682459f08..11a2a23fd9b2 100644
--- a/include/linux/platform_data/clk-fch.h
+++ b/include/linux/platform_data/clk-fch.h
@@ -12,7 +12,7 @@
 
 struct fch_clk_data {
 	void __iomem *base;
-	u32 is_rv;
+	char *name;
 };
 
 #endif /* __CLK_FCH_H */
diff --git a/include/linux/platform_data/mtd-nand-omap2.h b/include/linux/platform_data/mtd-nand-omap2.h
index de6ada739121..8c2f1f185353 100644
--- a/include/linux/platform_data/mtd-nand-omap2.h
+++ b/include/linux/platform_data/mtd-nand-omap2.h
@@ -7,6 +7,7 @@
 #define	_MTD_NAND_OMAP2_H
 
 #include <linux/mtd/partitions.h>
+#include <linux/mod_devicetable.h>
 
 #define	GPMC_BCH_NUM_REMAINDER	8
 
@@ -61,4 +62,11 @@ struct gpmc_nand_regs {
 	void __iomem	*gpmc_bch_result5[GPMC_BCH_NUM_REMAINDER];
 	void __iomem	*gpmc_bch_result6[GPMC_BCH_NUM_REMAINDER];
 };
-#endif
+
+static const struct of_device_id omap_nand_ids[] = {
+	{ .compatible = "ti,omap2-nand", },
+	{ .compatible = "ti,am64-nand", },
+	{},
+};
+
+#endif /* _MTD_NAND_OMAP2_H */
diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
deleted file mode 100644
index b324d03e580c..000000000000
--- a/include/linux/platform_data/ntc_thermistor.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * ntc_thermistor.h - NTC Thermistors
- *
- *  Copyright (C) 2010 Samsung Electronics
- *  MyungJoo Ham <myungjoo.ham@samsung.com>
- */
-#ifndef _LINUX_NTC_H
-#define _LINUX_NTC_H
-
-struct iio_channel;
-
-enum ntc_thermistor_type {
-	TYPE_B57330V2103,
-	TYPE_B57891S0103,
-	TYPE_NCPXXWB473,
-	TYPE_NCPXXWF104,
-	TYPE_NCPXXWL333,
-	TYPE_NCPXXXH103,
-};
-
-struct ntc_thermistor_platform_data {
-	/*
-	 * One (not both) of read_uV and read_ohm should be provided and only
-	 * one of the two should be provided.
-	 * Both functions should return negative value for an error case.
-	 *
-	 * pullup_uV, pullup_ohm, pulldown_ohm, and connect are required to use
-	 * read_uV()
-	 *
-	 * How to setup pullup_ohm, pulldown_ohm, and connect is
-	 * described at Documentation/hwmon/ntc_thermistor.rst
-	 *
-	 * pullup/down_ohm: 0 for infinite / not-connected
-	 *
-	 * chan: iio_channel pointer to communicate with the ADC which the
-	 * thermistor is using for conversion of the analog values.
-	 */
-	int (*read_uv)(struct ntc_thermistor_platform_data *);
-	unsigned int pullup_uv;
-
-	unsigned int pullup_ohm;
-	unsigned int pulldown_ohm;
-	enum { NTC_CONNECTED_POSITIVE, NTC_CONNECTED_GROUND } connect;
-	struct iio_channel *chan;
-
-	int (*read_ohm)(void);
-};
-
-#endif /* _LINUX_NTC_H */
diff --git a/include/linux/platform_data/pata_ixp4xx_cf.h b/include/linux/platform_data/pata_ixp4xx_cf.h
deleted file mode 100644
index e60fa41da4a5..000000000000
--- a/include/linux/platform_data/pata_ixp4xx_cf.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_PATA_IXP4XX_H
-#define __PLATFORM_DATA_PATA_IXP4XX_H
-
-#include <linux/types.h>
-
-/*
- * This structure provide a means for the board setup code
- * to give information to th pata_ixp4xx driver. It is
- * passed as platform_data.
- */
-struct ixp4xx_pata_data {
-	volatile u32	*cs0_cfg;
-	volatile u32	*cs1_cfg;
-	unsigned long	cs0_bits;
-	unsigned long	cs1_bits;
-	void __iomem	*cmd;
-	void __iomem	*ctl;
-};
-
-#endif
diff --git a/include/linux/platform_data/spi-clps711x.h b/include/linux/platform_data/spi-clps711x.h
deleted file mode 100644
index efaa596848c9..000000000000
--- a/include/linux/platform_data/spi-clps711x.h
+++ /dev/null
@@ -1,17 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *  CLPS711X SPI bus driver definitions
- *
- *  Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
- */
-
-#ifndef ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H
-#define ____LINUX_PLATFORM_DATA_SPI_CLPS711X_H
-
-/* Board specific platform_data */
-struct spi_clps711x_pdata {
-	int *chipselect;	/* Array of GPIO-numbers */
-	int num_chipselect;	/* Total count of GPIOs */
-};
-
-#endif
diff --git a/include/linux/platform_data/tps68470.h b/include/linux/platform_data/tps68470.h
new file mode 100644
index 000000000000..126d082c3f2e
--- /dev/null
+++ b/include/linux/platform_data/tps68470.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * TI TPS68470 PMIC platform data definition.
+ *
+ * Copyright (c) 2021 Red Hat Inc.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+#ifndef __PDATA_TPS68470_H
+#define __PDATA_TPS68470_H
+
+enum tps68470_regulators {
+	TPS68470_CORE,
+	TPS68470_ANA,
+	TPS68470_VCM,
+	TPS68470_VIO,
+	TPS68470_VSIO,
+	TPS68470_AUX1,
+	TPS68470_AUX2,
+	TPS68470_NUM_REGULATORS
+};
+
+struct regulator_init_data;
+
+struct tps68470_regulator_platform_data {
+	const struct regulator_init_data *reg_init_data[TPS68470_NUM_REGULATORS];
+};
+
+struct tps68470_clk_platform_data {
+	const char *consumer_dev_name;
+	const char *consumer_con_id;
+};
+
+#endif
diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h
index 17dc5cb6f3f2..a571b47ff362 100644
--- a/include/linux/platform_data/x86/asus-wmi.h
+++ b/include/linux/platform_data/x86/asus-wmi.h
@@ -77,6 +77,8 @@
 #define ASUS_WMI_DEVID_THERMAL_CTRL	0x00110011
 #define ASUS_WMI_DEVID_FAN_CTRL		0x00110012 /* deprecated */
 #define ASUS_WMI_DEVID_CPU_FAN_CTRL	0x00110013
+#define ASUS_WMI_DEVID_CPU_FAN_CURVE	0x00110024
+#define ASUS_WMI_DEVID_GPU_FAN_CURVE	0x00110025
 
 /* Power */
 #define ASUS_WMI_DEVID_PROCESSOR_STATE	0x00120012
diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h
new file mode 100644
index 000000000000..62d2bc774067
--- /dev/null
+++ b/include/linux/platform_data/x86/simatic-ipc-base.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Siemens SIMATIC IPC drivers
+ *
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *  Henning Schild <henning.schild@siemens.com>
+ *  Gerd Haeussler <gerd.haeussler.ext@siemens.com>
+ */
+
+#ifndef __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H
+#define __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H
+
+#include <linux/types.h>
+
+#define SIMATIC_IPC_DEVICE_NONE 0
+#define SIMATIC_IPC_DEVICE_227D 1
+#define SIMATIC_IPC_DEVICE_427E 2
+#define SIMATIC_IPC_DEVICE_127E 3
+#define SIMATIC_IPC_DEVICE_227E 4
+
+struct simatic_ipc_platform {
+	u8	devmode;
+};
+
+u32 simatic_ipc_get_membase0(unsigned int p2sb);
+
+#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_BASE_H */
diff --git a/include/linux/platform_data/x86/simatic-ipc.h b/include/linux/platform_data/x86/simatic-ipc.h
new file mode 100644
index 000000000000..f3b76b39776b
--- /dev/null
+++ b/include/linux/platform_data/x86/simatic-ipc.h
@@ -0,0 +1,72 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Siemens SIMATIC IPC drivers
+ *
+ * Copyright (c) Siemens AG, 2018-2021
+ *
+ * Authors:
+ *  Henning Schild <henning.schild@siemens.com>
+ *  Gerd Haeussler <gerd.haeussler.ext@siemens.com>
+ */
+
+#ifndef __PLATFORM_DATA_X86_SIMATIC_IPC_H
+#define __PLATFORM_DATA_X86_SIMATIC_IPC_H
+
+#include <linux/dmi.h>
+#include <linux/platform_data/x86/simatic-ipc-base.h>
+
+#define SIMATIC_IPC_DMI_ENTRY_OEM	129
+/* binary type */
+#define SIMATIC_IPC_DMI_TYPE		0xff
+#define SIMATIC_IPC_DMI_GROUP		0x05
+#define SIMATIC_IPC_DMI_ENTRY		0x02
+#define SIMATIC_IPC_DMI_TID		0x02
+
+enum simatic_ipc_station_ids {
+	SIMATIC_IPC_INVALID_STATION_ID = 0,
+	SIMATIC_IPC_IPC227D = 0x00000501,
+	SIMATIC_IPC_IPC427D = 0x00000701,
+	SIMATIC_IPC_IPC227E = 0x00000901,
+	SIMATIC_IPC_IPC277E = 0x00000902,
+	SIMATIC_IPC_IPC427E = 0x00000A01,
+	SIMATIC_IPC_IPC477E = 0x00000A02,
+	SIMATIC_IPC_IPC127E = 0x00000D01,
+};
+
+static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len)
+{
+	struct {
+		u8	type;		/* type (0xff = binary) */
+		u8	len;		/* len of data entry */
+		u8	group;
+		u8	entry;
+		u8	tid;
+		__le32	station_id;	/* station id (LE) */
+	} __packed * data_entry = (void *)data + sizeof(struct dmi_header);
+
+	while ((u8 *)data_entry < data + max_len) {
+		if (data_entry->type == SIMATIC_IPC_DMI_TYPE &&
+		    data_entry->len == sizeof(*data_entry) &&
+		    data_entry->group == SIMATIC_IPC_DMI_GROUP &&
+		    data_entry->entry == SIMATIC_IPC_DMI_ENTRY &&
+		    data_entry->tid == SIMATIC_IPC_DMI_TID) {
+			return le32_to_cpu(data_entry->station_id);
+		}
+		data_entry = (void *)((u8 *)(data_entry) + data_entry->len);
+	}
+
+	return SIMATIC_IPC_INVALID_STATION_ID;
+}
+
+static inline void
+simatic_ipc_find_dmi_entry_helper(const struct dmi_header *dh, void *_data)
+{
+	u32 *id = _data;
+
+	if (dh->type != SIMATIC_IPC_DMI_ENTRY_OEM)
+		return;
+
+	*id = simatic_ipc_get_station_id((u8 *)dh, dh->length);
+}
+
+#endif /* __PLATFORM_DATA_X86_SIMATIC_IPC_H */