diff options
Diffstat (limited to 'include/linux/platform_data')
31 files changed, 150 insertions, 390 deletions
diff --git a/include/linux/platform_data/asoc-pxa.h b/include/linux/platform_data/asoc-pxa.h index 327454cd8246..7b5b9e20fbf5 100644 --- a/include/linux/platform_data/asoc-pxa.h +++ b/include/linux/platform_data/asoc-pxa.h @@ -27,5 +27,6 @@ typedef struct { } pxa2xx_audio_ops_t; extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops); +extern void pxa27x_configure_ac97reset(int reset_gpio, bool to_gpio); #endif diff --git a/include/linux/platform_data/bd6107.h b/include/linux/platform_data/bd6107.h index 54a06a4d2618..596ca4f95cfa 100644 --- a/include/linux/platform_data/bd6107.h +++ b/include/linux/platform_data/bd6107.h @@ -8,7 +8,7 @@ struct device; struct bd6107_platform_data { - struct device *fbdev; + struct device *dev; unsigned int def_value; }; diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h index ab721cf13a98..7dae17b62a4d 100644 --- a/include/linux/platform_data/cros_ec_commands.h +++ b/include/linux/platform_data/cros_ec_commands.h @@ -4436,8 +4436,20 @@ struct ec_response_i2c_passthru_protect { * These commands are for sending and receiving message via HDMI CEC */ +#define EC_CEC_MAX_PORTS 16 + #define MAX_CEC_MSG_LEN 16 +/* + * Helper macros for packing/unpacking cec_events. + * bits[27:0] : bitmask of events from enum mkbp_cec_event + * bits[31:28]: port number + */ +#define EC_MKBP_EVENT_CEC_PACK(events, port) \ + (((events) & GENMASK(27, 0)) | (((port) & 0xf) << 28)) +#define EC_MKBP_EVENT_CEC_GET_EVENTS(event) ((event) & GENMASK(27, 0)) +#define EC_MKBP_EVENT_CEC_GET_PORT(event) (((event) >> 28) & 0xf) + /* CEC message from the AP to be written on the CEC bus */ #define EC_CMD_CEC_WRITE_MSG 0x00B8 @@ -4449,19 +4461,54 @@ struct ec_params_cec_write { uint8_t msg[MAX_CEC_MSG_LEN]; } __ec_align1; +/** + * struct ec_params_cec_write_v1 - Message to write to the CEC bus + * @port: CEC port to write the message on + * @msg_len: length of msg in bytes + * @msg: message content to write to the CEC bus + */ +struct ec_params_cec_write_v1 { + uint8_t port; + uint8_t msg_len; + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + +/* CEC message read from a CEC bus reported back to the AP */ +#define EC_CMD_CEC_READ_MSG 0x00B9 + +/** + * struct ec_params_cec_read - Read a message from the CEC bus + * @port: CEC port to read a message on + */ +struct ec_params_cec_read { + uint8_t port; +} __ec_align1; + +/** + * struct ec_response_cec_read - Message read from the CEC bus + * @msg_len: length of msg in bytes + * @msg: message content read from the CEC bus + */ +struct ec_response_cec_read { + uint8_t msg_len; + uint8_t msg[MAX_CEC_MSG_LEN]; +} __ec_align1; + /* Set various CEC parameters */ #define EC_CMD_CEC_SET 0x00BA /** * struct ec_params_cec_set - CEC parameters set * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @port: CEC port to set the parameter on * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC * or 1 to enable CEC functionality, in case cmd is * CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical * address between 0 and 15 or 0xff to unregister */ struct ec_params_cec_set { - uint8_t cmd; /* enum cec_command */ + uint8_t cmd : 4; /* enum cec_command */ + uint8_t port : 4; uint8_t val; } __ec_align1; @@ -4471,9 +4518,11 @@ struct ec_params_cec_set { /** * struct ec_params_cec_get - CEC parameters get * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS + * @port: CEC port to get the parameter on */ struct ec_params_cec_get { - uint8_t cmd; /* enum cec_command */ + uint8_t cmd : 4; /* enum cec_command */ + uint8_t port : 4; } __ec_align1; /** @@ -4487,6 +4536,17 @@ struct ec_response_cec_get { uint8_t val; } __ec_align1; +/* Get the number of CEC ports */ +#define EC_CMD_CEC_PORT_COUNT 0x00C1 + +/** + * struct ec_response_cec_port_count - CEC port count response + * @port_count: number of CEC ports + */ +struct ec_response_cec_port_count { + uint8_t port_count; +} __ec_align1; + /* CEC parameters command */ enum cec_command { /* CEC reading, writing and events enable */ @@ -4501,6 +4561,8 @@ enum mkbp_cec_event { EC_MKBP_CEC_SEND_OK = BIT(0), /* Outgoing message was not acknowledged */ EC_MKBP_CEC_SEND_FAILED = BIT(1), + /* Incoming message can be read out by AP */ + EC_MKBP_CEC_HAVE_DATA = BIT(2), }; /*****************************************************************************/ diff --git a/include/linux/platform_data/cros_ec_proto.h b/include/linux/platform_data/cros_ec_proto.h index 4f9f756bc17c..8865e350c12a 100644 --- a/include/linux/platform_data/cros_ec_proto.h +++ b/include/linux/platform_data/cros_ec_proto.h @@ -258,7 +258,7 @@ bool cros_ec_check_features(struct cros_ec_dev *ec, int feature); int cros_ec_get_sensor_count(struct cros_ec_dev *ec); -int cros_ec_cmd(struct cros_ec_device *ec_dev, unsigned int version, int command, void *outdata, +int cros_ec_cmd(struct cros_ec_device *ec_dev, unsigned int version, int command, const void *outdata, size_t outsize, void *indata, size_t insize); /** diff --git a/include/linux/platform_data/davinci-cpufreq.h b/include/linux/platform_data/davinci-cpufreq.h index bc208c64e3d7..1ef91c36f609 100644 --- a/include/linux/platform_data/davinci-cpufreq.h +++ b/include/linux/platform_data/davinci-cpufreq.h @@ -16,4 +16,10 @@ struct davinci_cpufreq_config { int (*init)(void); }; +#ifdef CONFIG_CPU_FREQ +int davinci_cpufreq_init(void); +#else +static inline int davinci_cpufreq_init(void) { return 0; } +#endif + #endif /* _MACH_DAVINCI_CPUFREQ_H */ diff --git a/include/linux/platform_data/dma-ste-dma40.h b/include/linux/platform_data/dma-ste-dma40.h deleted file mode 100644 index 10641633facc..000000000000 --- a/include/linux/platform_data/dma-ste-dma40.h +++ /dev/null @@ -1,209 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) ST-Ericsson SA 2007-2010 - * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson - * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson - */ - - -#ifndef STE_DMA40_H -#define STE_DMA40_H - -#include <linux/dmaengine.h> -#include <linux/scatterlist.h> -#include <linux/workqueue.h> -#include <linux/interrupt.h> - -/* - * Maxium size for a single dma descriptor - * Size is limited to 16 bits. - * Size is in the units of addr-widths (1,2,4,8 bytes) - * Larger transfers will be split up to multiple linked desc - */ -#define STEDMA40_MAX_SEG_SIZE 0xFFFF - -/* dev types for memcpy */ -#define STEDMA40_DEV_DST_MEMORY (-1) -#define STEDMA40_DEV_SRC_MEMORY (-1) - -enum stedma40_mode { - STEDMA40_MODE_LOGICAL = 0, - STEDMA40_MODE_PHYSICAL, - STEDMA40_MODE_OPERATION, -}; - -enum stedma40_mode_opt { - STEDMA40_PCHAN_BASIC_MODE = 0, - STEDMA40_LCHAN_SRC_LOG_DST_LOG = 0, - STEDMA40_PCHAN_MODULO_MODE, - STEDMA40_PCHAN_DOUBLE_DST_MODE, - STEDMA40_LCHAN_SRC_PHY_DST_LOG, - STEDMA40_LCHAN_SRC_LOG_DST_PHY, -}; - -#define STEDMA40_ESIZE_8_BIT 0x0 -#define STEDMA40_ESIZE_16_BIT 0x1 -#define STEDMA40_ESIZE_32_BIT 0x2 -#define STEDMA40_ESIZE_64_BIT 0x3 - -/* The value 4 indicates that PEN-reg shall be set to 0 */ -#define STEDMA40_PSIZE_PHY_1 0x4 -#define STEDMA40_PSIZE_PHY_2 0x0 -#define STEDMA40_PSIZE_PHY_4 0x1 -#define STEDMA40_PSIZE_PHY_8 0x2 -#define STEDMA40_PSIZE_PHY_16 0x3 - -/* - * The number of elements differ in logical and - * physical mode - */ -#define STEDMA40_PSIZE_LOG_1 STEDMA40_PSIZE_PHY_2 -#define STEDMA40_PSIZE_LOG_4 STEDMA40_PSIZE_PHY_4 -#define STEDMA40_PSIZE_LOG_8 STEDMA40_PSIZE_PHY_8 -#define STEDMA40_PSIZE_LOG_16 STEDMA40_PSIZE_PHY_16 - -/* Maximum number of possible physical channels */ -#define STEDMA40_MAX_PHYS 32 - -enum stedma40_flow_ctrl { - STEDMA40_NO_FLOW_CTRL, - STEDMA40_FLOW_CTRL, -}; - -/** - * struct stedma40_half_channel_info - dst/src channel configuration - * - * @big_endian: true if the src/dst should be read as big endian - * @data_width: Data width of the src/dst hardware - * @p_size: Burst size - * @flow_ctrl: Flow control on/off. - */ -struct stedma40_half_channel_info { - bool big_endian; - enum dma_slave_buswidth data_width; - int psize; - enum stedma40_flow_ctrl flow_ctrl; -}; - -/** - * struct stedma40_chan_cfg - Structure to be filled by client drivers. - * - * @dir: MEM 2 MEM, PERIPH 2 MEM , MEM 2 PERIPH, PERIPH 2 PERIPH - * @high_priority: true if high-priority - * @realtime: true if realtime mode is to be enabled. Only available on DMA40 - * version 3+, i.e DB8500v2+ - * @mode: channel mode: physical, logical, or operation - * @mode_opt: options for the chosen channel mode - * @dev_type: src/dst device type (driver uses dir to figure out which) - * @src_info: Parameters for dst half channel - * @dst_info: Parameters for dst half channel - * @use_fixed_channel: if true, use physical channel specified by phy_channel - * @phy_channel: physical channel to use, only if use_fixed_channel is true - * - * This structure has to be filled by the client drivers. - * It is recommended to do all dma configurations for clients in the machine. - * - */ -struct stedma40_chan_cfg { - enum dma_transfer_direction dir; - bool high_priority; - bool realtime; - enum stedma40_mode mode; - enum stedma40_mode_opt mode_opt; - int dev_type; - struct stedma40_half_channel_info src_info; - struct stedma40_half_channel_info dst_info; - - bool use_fixed_channel; - int phy_channel; -}; - -/** - * struct stedma40_platform_data - Configuration struct for the dma device. - * - * @dev_tx: mapping between destination event line and io address - * @dev_rx: mapping between source event line and io address - * @disabled_channels: A vector, ending with -1, that marks physical channels - * that are for different reasons not available for the driver. - * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW - * which avoids HW bug that exists in some versions of the controller. - * SoftLLI introduces relink overhead that could impact performace for - * certain use cases. - * @num_of_soft_lli_chans: The number of channels that needs to be configured - * to use SoftLLI. - * @use_esram_lcla: flag for mapping the lcla into esram region - * @num_of_memcpy_chans: The number of channels reserved for memcpy. - * @num_of_phy_chans: The number of physical channels implemented in HW. - * 0 means reading the number of channels from DMA HW but this is only valid - * for 'multiple of 4' channels, like 8. - */ -struct stedma40_platform_data { - int disabled_channels[STEDMA40_MAX_PHYS]; - int *soft_lli_chans; - int num_of_soft_lli_chans; - bool use_esram_lcla; - int num_of_memcpy_chans; - int num_of_phy_chans; -}; - -#ifdef CONFIG_STE_DMA40 - -/** - * stedma40_filter() - Provides stedma40_chan_cfg to the - * ste_dma40 dma driver via the dmaengine framework. - * does some checking of what's provided. - * - * Never directly called by client. It used by dmaengine. - * @chan: dmaengine handle. - * @data: Must be of type: struct stedma40_chan_cfg and is - * the configuration of the framework. - * - * - */ - -bool stedma40_filter(struct dma_chan *chan, void *data); - -/** - * stedma40_slave_mem() - Transfers a raw data buffer to or from a slave - * (=device) - * - * @chan: dmaengine handle - * @addr: source or destination physicall address. - * @size: bytes to transfer - * @direction: direction of transfer - * @flags: is actually enum dma_ctrl_flags. See dmaengine.h - */ - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - struct scatterlist sg; - sg_init_table(&sg, 1); - sg.dma_address = addr; - sg.length = size; - - return dmaengine_prep_slave_sg(chan, &sg, 1, direction, flags); -} - -#else -static inline bool stedma40_filter(struct dma_chan *chan, void *data) -{ - return false; -} - -static inline struct -dma_async_tx_descriptor *stedma40_slave_mem(struct dma_chan *chan, - dma_addr_t addr, - unsigned int size, - enum dma_transfer_direction direction, - unsigned long flags) -{ - return NULL; -} -#endif - -#endif diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h index f377817ce75c..cdd8cfb424f5 100644 --- a/include/linux/platform_data/gpio-omap.h +++ b/include/linux/platform_data/gpio-omap.h @@ -144,9 +144,6 @@ #define OMAP_MAX_GPIO_LINES 192 -#define OMAP_MPUIO(nr) (OMAP_MAX_GPIO_LINES + (nr)) -#define OMAP_GPIO_IS_MPUIO(nr) ((nr) >= OMAP_MAX_GPIO_LINES) - #ifndef __ASSEMBLER__ struct omap_gpio_reg_offs { u16 revision; diff --git a/include/linux/platform_data/gpio_backlight.h b/include/linux/platform_data/gpio_backlight.h index 1a8b5b1946fe..323fbf5f7613 100644 --- a/include/linux/platform_data/gpio_backlight.h +++ b/include/linux/platform_data/gpio_backlight.h @@ -8,7 +8,7 @@ struct device; struct gpio_backlight_platform_data { - struct device *fbdev; + struct device *dev; }; #endif diff --git a/include/linux/platform_data/gsc_hwmon.h b/include/linux/platform_data/gsc_hwmon.h index f2781aa7eff8..70e8a6bec0f6 100644 --- a/include/linux/platform_data/gsc_hwmon.h +++ b/include/linux/platform_data/gsc_hwmon.h @@ -40,6 +40,6 @@ struct gsc_hwmon_platform_data { unsigned int resolution; unsigned int vreference; unsigned int fan_base; - struct gsc_hwmon_channel channels[]; + struct gsc_hwmon_channel channels[] __counted_by(nchannels); }; #endif diff --git a/include/linux/platform_data/hirschmann-hellcreek.h b/include/linux/platform_data/hirschmann-hellcreek.h index 6a000df5541f..8748680e9e3c 100644 --- a/include/linux/platform_data/hirschmann-hellcreek.h +++ b/include/linux/platform_data/hirschmann-hellcreek.h @@ -1,4 +1,4 @@ -/* SPDX-License-Identifier: (GPL-2.0 or MIT) */ +/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */ /* * Hirschmann Hellcreek TSN switch platform data. * diff --git a/include/linux/platform_data/i2c-mux-reg.h b/include/linux/platform_data/i2c-mux-reg.h index 2543c2a1c9ae..e2e895768311 100644 --- a/include/linux/platform_data/i2c-mux-reg.h +++ b/include/linux/platform_data/i2c-mux-reg.h @@ -17,7 +17,6 @@ * @n_values: Number of multiplexer channels * @little_endian: Indicating if the register is in little endian * @write_only: Reading the register is not allowed by hardware - * @classes: Optional I2C auto-detection classes * @idle: Value to write to mux when idle * @idle_in_use: indicate if idle value is in use * @reg: Virtual address of the register to switch channel @@ -30,7 +29,6 @@ struct i2c_mux_reg_platform_data { int n_values; bool little_endian; bool write_only; - const unsigned int *classes; u32 idle; bool idle_in_use; void __iomem *reg; diff --git a/include/linux/platform_data/keypad-omap.h b/include/linux/platform_data/keypad-omap.h index 3e7c64c854f4..f3f1311cdf3a 100644 --- a/include/linux/platform_data/keypad-omap.h +++ b/include/linux/platform_data/keypad-omap.h @@ -19,9 +19,6 @@ struct omap_kp_platform_data { bool rep; unsigned long delay; bool dbounce; - /* specific to OMAP242x*/ - unsigned int *row_gpios; - unsigned int *col_gpios; }; /* Group (0..3) -- when multiple keys are pressed, only the diff --git a/include/linux/platform_data/lcd-mipid.h b/include/linux/platform_data/lcd-mipid.h index 63f05eb23827..4927cfc5158c 100644 --- a/include/linux/platform_data/lcd-mipid.h +++ b/include/linux/platform_data/lcd-mipid.h @@ -15,10 +15,8 @@ enum mipid_test_result { #ifdef __KERNEL__ struct mipid_platform_data { - int nreset_gpio; int data_lines; - void (*shutdown)(struct mipid_platform_data *pdata); void (*set_bklight_level)(struct mipid_platform_data *pdata, int level); int (*get_bklight_level)(struct mipid_platform_data *pdata); diff --git a/include/linux/platform_data/leds-lp55xx.h b/include/linux/platform_data/leds-lp55xx.h index 3441064713a3..3cc8db0b12b5 100644 --- a/include/linux/platform_data/leds-lp55xx.h +++ b/include/linux/platform_data/leds-lp55xx.h @@ -73,6 +73,9 @@ struct lp55xx_platform_data { /* Clock configuration */ u8 clock_mode; + /* Charge pump mode */ + u32 charge_pump_mode; + /* optional enable GPIO */ struct gpio_desc *enable_gpiod; diff --git a/include/linux/platform_data/lv5207lp.h b/include/linux/platform_data/lv5207lp.h index c9da8d402750..95d85c1394bc 100644 --- a/include/linux/platform_data/lv5207lp.h +++ b/include/linux/platform_data/lv5207lp.h @@ -8,7 +8,7 @@ struct device; struct lv5207lp_platform_data { - struct device *fbdev; + struct device *dev; unsigned int max_value; unsigned int def_value; }; diff --git a/include/linux/platform_data/microchip-ksz.h b/include/linux/platform_data/microchip-ksz.h index ea1cc6d829e9..f177416635a2 100644 --- a/include/linux/platform_data/microchip-ksz.h +++ b/include/linux/platform_data/microchip-ksz.h @@ -20,10 +20,31 @@ #define __MICROCHIP_KSZ_H #include <linux/types.h> +#include <linux/platform_data/dsa.h> + +enum ksz_chip_id { + KSZ8563_CHIP_ID = 0x8563, + KSZ8795_CHIP_ID = 0x8795, + KSZ8794_CHIP_ID = 0x8794, + KSZ8765_CHIP_ID = 0x8765, + KSZ8830_CHIP_ID = 0x8830, + KSZ9477_CHIP_ID = 0x00947700, + KSZ9896_CHIP_ID = 0x00989600, + KSZ9897_CHIP_ID = 0x00989700, + KSZ9893_CHIP_ID = 0x00989300, + KSZ9563_CHIP_ID = 0x00956300, + KSZ9567_CHIP_ID = 0x00956700, + LAN9370_CHIP_ID = 0x00937000, + LAN9371_CHIP_ID = 0x00937100, + LAN9372_CHIP_ID = 0x00937200, + LAN9373_CHIP_ID = 0x00937300, + LAN9374_CHIP_ID = 0x00937400, +}; struct ksz_platform_data { + /* Must be first such that dsa_register_switch() can access it */ + struct dsa_chip_data cd; u32 chip_id; - u16 enabled_ports; }; #endif diff --git a/include/linux/platform_data/mmc-omap.h b/include/linux/platform_data/mmc-omap.h index 91051e9907f3..054d0c3c5ec5 100644 --- a/include/linux/platform_data/mmc-omap.h +++ b/include/linux/platform_data/mmc-omap.h @@ -20,8 +20,6 @@ struct omap_mmc_platform_data { * maximum frequency on the MMC bus */ unsigned int max_freq; - /* switch the bus to a new slot */ - int (*switch_slot)(struct device *dev, int slot); /* initialize board-specific MMC functionality, can be NULL if * not supported */ int (*init)(struct device *dev); diff --git a/include/linux/platform_data/omap-twl4030.h b/include/linux/platform_data/omap-twl4030.h index 0dd851ea1c72..7fcb55fe21c9 100644 --- a/include/linux/platform_data/omap-twl4030.h +++ b/include/linux/platform_data/omap-twl4030.h @@ -37,9 +37,6 @@ struct omap_tw4030_pdata { bool has_digimic0; bool has_digimic1; u8 has_linein; - - /* Jack detect GPIO or <= 0 if it is not implemented */ - int jack_detect; }; #endif /* _OMAP_TWL4030_H_ */ diff --git a/include/linux/platform_data/pca953x.h b/include/linux/platform_data/pca953x.h index 96c1a14ab365..3c3787c4d96c 100644 --- a/include/linux/platform_data/pca953x.h +++ b/include/linux/platform_data/pca953x.h @@ -11,21 +11,8 @@ struct pca953x_platform_data { /* number of the first GPIO */ unsigned gpio_base; - /* initial polarity inversion setting */ - u32 invert; - /* interrupt base */ int irq_base; - - void *context; /* param to setup/teardown */ - - int (*setup)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - void (*teardown)(struct i2c_client *client, - unsigned gpio, unsigned ngpio, - void *context); - const char *const *names; }; #endif /* _LINUX_PCA953X_H */ diff --git a/include/linux/platform_data/pxa2xx_udc.h b/include/linux/platform_data/pxa2xx_udc.h index ff9c35dca59d..bc99cc6a3c5f 100644 --- a/include/linux/platform_data/pxa2xx_udc.h +++ b/include/linux/platform_data/pxa2xx_udc.h @@ -25,4 +25,10 @@ struct pxa2xx_udc_mach_info { int gpio_pullup; /* high == pullup activated */ }; +#ifdef CONFIG_PXA27x +extern void pxa27x_clear_otgph(void); +#else +#define pxa27x_clear_otgph() do {} while (0) +#endif + #endif diff --git a/include/linux/platform_data/rtc-ds2404.h b/include/linux/platform_data/rtc-ds2404.h deleted file mode 100644 index 22c53825528f..000000000000 --- a/include/linux/platform_data/rtc-ds2404.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * ds2404.h - platform data structure for the DS2404 RTC. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2012 Sven Schnelle <svens@stackframe.org> - */ - -#ifndef __LINUX_DS2404_H -#define __LINUX_DS2404_H - -struct ds2404_platform_data { - - unsigned int gpio_rst; - unsigned int gpio_clk; - unsigned int gpio_dq; -}; -#endif diff --git a/include/linux/platform_data/shmob_drm.h b/include/linux/platform_data/shmob_drm.h index d661399b217d..6c19d4fbbe39 100644 --- a/include/linux/platform_data/shmob_drm.h +++ b/include/linux/platform_data/shmob_drm.h @@ -10,7 +10,7 @@ #ifndef __SHMOB_DRM_H__ #define __SHMOB_DRM_H__ -#include <drm/drm_mode.h> +#include <video/videomode.h> enum shmob_drm_clk_source { SHMOB_DRM_CLK_BUS, @@ -18,72 +18,21 @@ enum shmob_drm_clk_source { SHMOB_DRM_CLK_EXTERNAL, }; -enum shmob_drm_interface { - SHMOB_DRM_IFACE_RGB8, /* 24bpp, 8:8:8 */ - SHMOB_DRM_IFACE_RGB9, /* 18bpp, 9:9 */ - SHMOB_DRM_IFACE_RGB12A, /* 24bpp, 12:12 */ - SHMOB_DRM_IFACE_RGB12B, /* 12bpp */ - SHMOB_DRM_IFACE_RGB16, /* 16bpp */ - SHMOB_DRM_IFACE_RGB18, /* 18bpp */ - SHMOB_DRM_IFACE_RGB24, /* 24bpp */ - SHMOB_DRM_IFACE_YUV422, /* 16bpp */ - SHMOB_DRM_IFACE_SYS8A, /* 24bpp, 8:8:8 */ - SHMOB_DRM_IFACE_SYS8B, /* 18bpp, 8:8:2 */ - SHMOB_DRM_IFACE_SYS8C, /* 18bpp, 2:8:8 */ - SHMOB_DRM_IFACE_SYS8D, /* 16bpp, 8:8 */ - SHMOB_DRM_IFACE_SYS9, /* 18bpp, 9:9 */ - SHMOB_DRM_IFACE_SYS12, /* 24bpp, 12:12 */ - SHMOB_DRM_IFACE_SYS16A, /* 16bpp */ - SHMOB_DRM_IFACE_SYS16B, /* 18bpp, 16:2 */ - SHMOB_DRM_IFACE_SYS16C, /* 18bpp, 2:16 */ - SHMOB_DRM_IFACE_SYS18, /* 18bpp */ - SHMOB_DRM_IFACE_SYS24, /* 24bpp */ -}; - -struct shmob_drm_backlight_data { - const char *name; - int max_brightness; - int (*get_brightness)(void); - int (*set_brightness)(int brightness); -}; - struct shmob_drm_panel_data { unsigned int width_mm; /* Panel width in mm */ unsigned int height_mm; /* Panel height in mm */ - struct drm_mode_modeinfo mode; + struct videomode mode; }; -struct shmob_drm_sys_interface_data { - unsigned int read_latch:6; - unsigned int read_setup:8; - unsigned int read_cycle:8; - unsigned int read_strobe:8; - unsigned int write_setup:8; - unsigned int write_cycle:8; - unsigned int write_strobe:8; - unsigned int cs_setup:3; - unsigned int vsync_active_high:1; - unsigned int vsync_dir_input:1; -}; - -#define SHMOB_DRM_IFACE_FL_DWPOL (1 << 0) /* Rising edge dot clock data latch */ -#define SHMOB_DRM_IFACE_FL_DIPOL (1 << 1) /* Active low display enable */ -#define SHMOB_DRM_IFACE_FL_DAPOL (1 << 2) /* Active low display data */ -#define SHMOB_DRM_IFACE_FL_HSCNT (1 << 3) /* Disable HSYNC during VBLANK */ -#define SHMOB_DRM_IFACE_FL_DWCNT (1 << 4) /* Disable dotclock during blanking */ - struct shmob_drm_interface_data { - enum shmob_drm_interface interface; - struct shmob_drm_sys_interface_data sys; + unsigned int bus_fmt; /* MEDIA_BUS_FMT_* */ unsigned int clk_div; - unsigned int flags; }; struct shmob_drm_platform_data { enum shmob_drm_clk_source clk_source; struct shmob_drm_interface_data iface; struct shmob_drm_panel_data panel; - struct shmob_drm_backlight_data backlight; }; #endif /* __SHMOB_DRM_H__ */ diff --git a/include/linux/platform_data/sht3x.h b/include/linux/platform_data/sht3x.h deleted file mode 100644 index 14680d2a98f7..000000000000 --- a/include/linux/platform_data/sht3x.h +++ /dev/null @@ -1,15 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2016 Sensirion AG, Switzerland - * Author: David Frey <david.frey@sensirion.com> - * Author: Pascal Sachs <pascal.sachs@sensirion.com> - */ - -#ifndef __SHT3X_H_ -#define __SHT3X_H_ - -struct sht3x_platform_data { - bool blocking_io; - bool high_precision; -}; -#endif /* __SHT3X_H_ */ diff --git a/include/linux/platform_data/si5351.h b/include/linux/platform_data/si5351.h index c71a2dd66143..5f412a615532 100644 --- a/include/linux/platform_data/si5351.h +++ b/include/linux/platform_data/si5351.h @@ -105,10 +105,12 @@ struct si5351_clkout_config { * @clk_xtal: xtal input clock * @clk_clkin: clkin input clock * @pll_src: array of pll source clock setting + * @pll_reset: array indicating if plls should be reset after setting the rate * @clkout: array of clkout configuration */ struct si5351_platform_data { enum si5351_pll_src pll_src[2]; + bool pll_reset[2]; struct si5351_clkout_config clkout[8]; }; diff --git a/include/linux/platform_data/spi-s3c64xx.h b/include/linux/platform_data/spi-s3c64xx.h index 3101152ce449..1d6e6c424fc6 100644 --- a/include/linux/platform_data/spi-s3c64xx.h +++ b/include/linux/platform_data/spi-s3c64xx.h @@ -36,6 +36,7 @@ struct s3c64xx_spi_info { int src_clk_nr; int num_cs; bool no_cs; + bool polling; int (*cfg_gpio)(void); }; diff --git a/include/linux/platform_data/st_sensors_pdata.h b/include/linux/platform_data/st_sensors_pdata.h index 897051e51b78..a657830232ae 100644 --- a/include/linux/platform_data/st_sensors_pdata.h +++ b/include/linux/platform_data/st_sensors_pdata.h @@ -15,7 +15,7 @@ * @drdy_int_pin: Redirect DRDY on pin 1 (1) or pin 2 (2). * Available only for accelerometer, magnetometer and pressure sensors. * Accelerometer DRDY on LSM330 available only on pin 1 (see datasheet). - * Magnetometer DRDY is supported only on LSM9DS0. + * Magnetometer DRDY is supported only on LSM9DS0 and LSM303D. * @open_drain: set the interrupt line to be open drain if possible. * @spi_3wire: enable spi-3wire mode. * @pullups: enable/disable i2c controller pullup resistors. diff --git a/include/linux/platform_data/video-mx3fb.h b/include/linux/platform_data/video-mx3fb.h deleted file mode 100644 index d03dc322a616..000000000000 --- a/include/linux/platform_data/video-mx3fb.h +++ /dev/null @@ -1,50 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2008 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - */ - -#ifndef __ASM_ARCH_MX3FB_H__ -#define __ASM_ARCH_MX3FB_H__ - -#include <linux/device.h> -#include <linux/fb.h> - -/* Proprietary FB_SYNC_ flags */ -#define FB_SYNC_OE_ACT_HIGH 0x80000000 -#define FB_SYNC_CLK_INVERT 0x40000000 -#define FB_SYNC_DATA_INVERT 0x20000000 -#define FB_SYNC_CLK_IDLE_EN 0x10000000 -#define FB_SYNC_SHARP_MODE 0x08000000 -#define FB_SYNC_SWAP_RGB 0x04000000 -#define FB_SYNC_CLK_SEL_EN 0x02000000 - -/* - * Specify the way your display is connected. The IPU can arbitrarily - * map the internal colors to the external data lines. We only support - * the following mappings at the moment. - */ -enum disp_data_mapping { - /* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */ - IPU_DISP_DATA_MAPPING_RGB666, - /* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */ - IPU_DISP_DATA_MAPPING_RGB565, - /* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */ - IPU_DISP_DATA_MAPPING_RGB888, -}; - -/** - * struct mx3fb_platform_data - mx3fb platform data - * - * @dma_dev: pointer to the dma-device, used for dma-slave connection - * @mode: pointer to a platform-provided per mxc_register_fb() videomode - */ -struct mx3fb_platform_data { - struct device *dma_dev; - const char *name; - const struct fb_videomode *mode; - int num_modes; - enum disp_data_mapping disp_data_fmt; -}; - -#endif diff --git a/include/linux/platform_data/x86/asus-wmi.h b/include/linux/platform_data/x86/asus-wmi.h index 28234dc9fa6a..ab1c7deff118 100644 --- a/include/linux/platform_data/x86/asus-wmi.h +++ b/include/linux/platform_data/x86/asus-wmi.h @@ -58,6 +58,10 @@ #define ASUS_WMI_DEVID_KBD_BACKLIGHT 0x00050021 #define ASUS_WMI_DEVID_LIGHT_SENSOR 0x00050022 /* ?? */ #define ASUS_WMI_DEVID_LIGHTBAR 0x00050025 +/* This can only be used to disable the screen, not re-enable */ +#define ASUS_WMI_DEVID_SCREENPAD_POWER 0x00050031 +/* Writing a brightness re-enables the screen if disabled */ +#define ASUS_WMI_DEVID_SCREENPAD_LIGHT 0x00050032 #define ASUS_WMI_DEVID_FAN_BOOST_MODE 0x00110018 #define ASUS_WMI_DEVID_THROTTLE_THERMAL_POLICY 0x00120075 @@ -66,6 +70,7 @@ #define ASUS_WMI_DEVID_CAMERA 0x00060013 #define ASUS_WMI_DEVID_LID_FLIP 0x00060062 #define ASUS_WMI_DEVID_LID_FLIP_ROG 0x00060077 +#define ASUS_WMI_DEVID_MINI_LED_MODE 0x0005001E /* Storage */ #define ASUS_WMI_DEVID_CARDREADER 0x00080013 @@ -80,8 +85,19 @@ #define ASUS_WMI_DEVID_FAN_CTRL 0x00110012 /* deprecated */ #define ASUS_WMI_DEVID_CPU_FAN_CTRL 0x00110013 #define ASUS_WMI_DEVID_GPU_FAN_CTRL 0x00110014 +#define ASUS_WMI_DEVID_MID_FAN_CTRL 0x00110031 #define ASUS_WMI_DEVID_CPU_FAN_CURVE 0x00110024 #define ASUS_WMI_DEVID_GPU_FAN_CURVE 0x00110025 +#define ASUS_WMI_DEVID_MID_FAN_CURVE 0x00110032 + +/* Tunables for AUS ROG laptops */ +#define ASUS_WMI_DEVID_PPT_PL2_SPPT 0x001200A0 +#define ASUS_WMI_DEVID_PPT_PL1_SPL 0x001200A3 +#define ASUS_WMI_DEVID_PPT_APU_SPPT 0x001200B0 +#define ASUS_WMI_DEVID_PPT_PLAT_SPPT 0x001200B1 +#define ASUS_WMI_DEVID_PPT_FPPT 0x001200C1 +#define ASUS_WMI_DEVID_NV_DYN_BOOST 0x001200C0 +#define ASUS_WMI_DEVID_NV_THERM_TARGET 0x001200C2 /* Power */ #define ASUS_WMI_DEVID_PROCESSOR_STATE 0x00120012 @@ -95,7 +111,15 @@ /* Keyboard dock */ #define ASUS_WMI_DEVID_KBD_DOCK 0x00120063 -/* dgpu on/off */ +/* Charging mode - 1=Barrel, 2=USB */ +#define ASUS_WMI_DEVID_CHARGE_MODE 0x0012006C + +/* MCU powersave mode */ +#define ASUS_WMI_DEVID_MCU_POWERSAVE 0x001200E2 + +/* epu is connected? 1 == true */ +#define ASUS_WMI_DEVID_EGPU_CONNECTED 0x00090018 +/* egpu on/off */ #define ASUS_WMI_DEVID_EGPU 0x00090019 /* dgpu on/off */ diff --git a/include/linux/platform_data/x86/clk-lpss.h b/include/linux/platform_data/x86/clk-lpss.h index 41df326583f9..7f132029316a 100644 --- a/include/linux/platform_data/x86/clk-lpss.h +++ b/include/linux/platform_data/x86/clk-lpss.h @@ -15,6 +15,6 @@ struct lpss_clk_data { struct clk *clk; }; -extern int lpss_atom_clk_init(void); +int lpss_atom_clk_init(void); #endif /* __CLK_LPSS_H */ diff --git a/include/linux/platform_data/x86/simatic-ipc-base.h b/include/linux/platform_data/x86/simatic-ipc-base.h index 57d6a10dfc9e..2d7f7120ba6b 100644 --- a/include/linux/platform_data/x86/simatic-ipc-base.h +++ b/include/linux/platform_data/x86/simatic-ipc-base.h @@ -2,7 +2,7 @@ /* * Siemens SIMATIC IPC drivers * - * Copyright (c) Siemens AG, 2018-2021 + * Copyright (c) Siemens AG, 2018-2023 * * Authors: * Henning Schild <henning.schild@siemens.com> @@ -20,6 +20,9 @@ #define SIMATIC_IPC_DEVICE_127E 3 #define SIMATIC_IPC_DEVICE_227E 4 #define SIMATIC_IPC_DEVICE_227G 5 +#define SIMATIC_IPC_DEVICE_BX_21A 6 +#define SIMATIC_IPC_DEVICE_BX_39A 7 +#define SIMATIC_IPC_DEVICE_BX_59A 8 struct simatic_ipc_platform { u8 devmode; diff --git a/include/linux/platform_data/x86/simatic-ipc.h b/include/linux/platform_data/x86/simatic-ipc.h index a48bb5240977..8d8b3b919674 100644 --- a/include/linux/platform_data/x86/simatic-ipc.h +++ b/include/linux/platform_data/x86/simatic-ipc.h @@ -2,7 +2,7 @@ /* * Siemens SIMATIC IPC drivers * - * Copyright (c) Siemens AG, 2018-2021 + * Copyright (c) Siemens AG, 2018-2023 * * Authors: * Henning Schild <henning.schild@siemens.com> @@ -32,8 +32,12 @@ enum simatic_ipc_station_ids { SIMATIC_IPC_IPC477E = 0x00000A02, SIMATIC_IPC_IPC127E = 0x00000D01, SIMATIC_IPC_IPC227G = 0x00000F01, + SIMATIC_IPC_IPC277G = 0x00000F02, SIMATIC_IPC_IPCBX_39A = 0x00001001, SIMATIC_IPC_IPCPX_39A = 0x00001002, + SIMATIC_IPC_IPCBX_21A = 0x00001101, + SIMATIC_IPC_IPCBX_56A = 0x00001201, + SIMATIC_IPC_IPCBX_59A = 0x00001202, }; static inline u32 simatic_ipc_get_station_id(u8 *data, int max_len) |