summaryrefslogtreecommitdiff
path: root/include/linux/pm.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/pm.h')
-rw-r--r--include/linux/pm.h71
1 files changed, 43 insertions, 28 deletions
diff --git a/include/linux/pm.h b/include/linux/pm.h
index 8c6583a53a06..d915d0345fa1 100644
--- a/include/linux/pm.h
+++ b/include/linux/pm.h
@@ -264,9 +264,9 @@ typedef struct pm_message {
* registers, so that it is fully operational.
*
* @runtime_idle: Device appears to be inactive and it might be put into a
- * low-power state if all of the necessary conditions are satisfied. Check
- * these conditions and handle the device as appropriate, possibly queueing
- * a suspend request for it. The return value is ignored by the PM core.
+ * low-power state if all of the necessary conditions are satisfied.
+ * Check these conditions, and return 0 if it's appropriate to let the PM
+ * core queue a suspend request for the device.
*
* Refer to Documentation/power/runtime_pm.txt for more information about the
* role of the above callbacks in device runtime power management.
@@ -352,7 +352,7 @@ const struct dev_pm_ops name = { \
/*
* Use this for defining a set of PM operations to be used in all situations
- * (sustem suspend, hibernation or runtime PM).
+ * (system suspend, hibernation or runtime PM).
* NOTE: In general, system suspend callbacks, .suspend() and .resume(), should
* be different from the corresponding runtime PM callbacks, .runtime_suspend(),
* and .runtime_resume(), because .runtime_suspend() always works on an already
@@ -379,7 +379,7 @@ const struct dev_pm_ops name = { \
*
* ON No transition.
*
- * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
+ * FREEZE System is going to hibernate, call ->prepare() and ->freeze()
* for all devices.
*
* SUSPEND System is going to suspend, call ->prepare() and ->suspend()
@@ -423,7 +423,7 @@ const struct dev_pm_ops name = { \
#define PM_EVENT_INVALID (-1)
#define PM_EVENT_ON 0x0000
-#define PM_EVENT_FREEZE 0x0001
+#define PM_EVENT_FREEZE 0x0001
#define PM_EVENT_SUSPEND 0x0002
#define PM_EVENT_HIBERNATE 0x0004
#define PM_EVENT_QUIESCE 0x0008
@@ -542,6 +542,8 @@ struct dev_pm_info {
unsigned int async_suspend:1;
bool is_prepared:1; /* Owned by the PM core */
bool is_suspended:1; /* Ditto */
+ bool is_noirq_suspended:1;
+ bool is_late_suspended:1;
bool ignore_children:1;
bool early_init:1; /* Owned by the PM core */
spinlock_t lock;
@@ -582,6 +584,7 @@ struct dev_pm_info {
unsigned long accounting_timestamp;
#endif
struct pm_subsys_data *subsys_data; /* Owned by the subsystem. */
+ void (*set_latency_tolerance)(struct device *, s32);
struct dev_pm_qos *qos;
};
@@ -612,11 +615,11 @@ struct dev_pm_domain {
* message is implicit:
*
* ON Driver starts working again, responding to hardware events
- * and software requests. The hardware may have gone through
- * a power-off reset, or it may have maintained state from the
- * previous suspend() which the driver will rely on while
- * resuming. On most platforms, there are no restrictions on
- * availability of resources like clocks during resume().
+ * and software requests. The hardware may have gone through
+ * a power-off reset, or it may have maintained state from the
+ * previous suspend() which the driver will rely on while
+ * resuming. On most platforms, there are no restrictions on
+ * availability of resources like clocks during resume().
*
* Other transitions are triggered by messages sent using suspend(). All
* these transitions quiesce the driver, so that I/O queues are inactive.
@@ -626,21 +629,21 @@ struct dev_pm_domain {
* differ according to the message:
*
* SUSPEND Quiesce, enter a low power device state appropriate for
- * the upcoming system state (such as PCI_D3hot), and enable
- * wakeup events as appropriate.
+ * the upcoming system state (such as PCI_D3hot), and enable
+ * wakeup events as appropriate.
*
* HIBERNATE Enter a low power device state appropriate for the hibernation
- * state (eg. ACPI S4) and enable wakeup events as appropriate.
+ * state (eg. ACPI S4) and enable wakeup events as appropriate.
*
* FREEZE Quiesce operations so that a consistent image can be saved;
- * but do NOT otherwise enter a low power device state, and do
- * NOT emit system wakeup events.
+ * but do NOT otherwise enter a low power device state, and do
+ * NOT emit system wakeup events.
*
* PRETHAW Quiesce as if for FREEZE; additionally, prepare for restoring
- * the system from a snapshot taken after an earlier FREEZE.
- * Some drivers will need to reset their hardware state instead
- * of preserving it, to ensure that it's never mistaken for the
- * state which that earlier snapshot had set up.
+ * the system from a snapshot taken after an earlier FREEZE.
+ * Some drivers will need to reset their hardware state instead
+ * of preserving it, to ensure that it's never mistaken for the
+ * state which that earlier snapshot had set up.
*
* A minimally power-aware driver treats all messages as SUSPEND, fully
* reinitializes its device during resume() -- whether or not it was reset
@@ -717,14 +720,26 @@ static inline void dpm_for_each_dev(void *data, void (*fn)(struct device *, void
{
}
-#define pm_generic_prepare NULL
-#define pm_generic_suspend NULL
-#define pm_generic_resume NULL
-#define pm_generic_freeze NULL
-#define pm_generic_thaw NULL
-#define pm_generic_restore NULL
-#define pm_generic_poweroff NULL
-#define pm_generic_complete NULL
+#define pm_generic_prepare NULL
+#define pm_generic_suspend_late NULL
+#define pm_generic_suspend_noirq NULL
+#define pm_generic_suspend NULL
+#define pm_generic_resume_early NULL
+#define pm_generic_resume_noirq NULL
+#define pm_generic_resume NULL
+#define pm_generic_freeze_noirq NULL
+#define pm_generic_freeze_late NULL
+#define pm_generic_freeze NULL
+#define pm_generic_thaw_noirq NULL
+#define pm_generic_thaw_early NULL
+#define pm_generic_thaw NULL
+#define pm_generic_restore_noirq NULL
+#define pm_generic_restore_early NULL
+#define pm_generic_restore NULL
+#define pm_generic_poweroff_noirq NULL
+#define pm_generic_poweroff_late NULL
+#define pm_generic_poweroff NULL
+#define pm_generic_complete NULL
#endif /* !CONFIG_PM_SLEEP */
/* How to reorder dpm_list after device_move() */