1 files changed, 0 insertions, 117 deletions
diff --git a/include/linux/preempt_mask.h b/include/linux/preempt_mask.h
deleted file mode 100644
index dbeec4d4a3be..000000000000
--- a/include/linux/preempt_mask.h
+++ /dev/null
@@ -1,117 +0,0 @@
-#ifndef LINUX_PREEMPT_MASK_H
-#define LINUX_PREEMPT_MASK_H
-
-#include <linux/preempt.h>
-
-/*
- * We put the hardirq and softirq counter into the preemption
- * counter. The bitmask has the following meaning:
- *
- * - bits 0-7 are the preemption count (max preemption depth: 256)
- * - bits 8-15 are the softirq count (max # of softirqs: 256)
- *
- * The hardirq count could in theory be the same as the number of
- * interrupts in the system, but we run all interrupt handlers with
- * interrupts disabled, so we cannot have nesting interrupts. Though
- * there are a few palaeontologic drivers which reenable interrupts in
- * the handler, so we need more than one bit here.
- *
- * PREEMPT_MASK:	0x000000ff
- * SOFTIRQ_MASK:	0x0000ff00
- * HARDIRQ_MASK:	0x000f0000
- *     NMI_MASK:	0x00100000
- * PREEMPT_ACTIVE:	0x00200000
- */
-#define PREEMPT_BITS	8
-#define SOFTIRQ_BITS	8
-#define HARDIRQ_BITS	4
-#define NMI_BITS	1
-
-#define PREEMPT_SHIFT	0
-#define SOFTIRQ_SHIFT	(PREEMPT_SHIFT + PREEMPT_BITS)
-#define HARDIRQ_SHIFT	(SOFTIRQ_SHIFT + SOFTIRQ_BITS)
-#define NMI_SHIFT	(HARDIRQ_SHIFT + HARDIRQ_BITS)
-
-#define __IRQ_MASK(x)	((1UL << (x))-1)
-
-#define PREEMPT_MASK	(__IRQ_MASK(PREEMPT_BITS) << PREEMPT_SHIFT)
-#define SOFTIRQ_MASK	(__IRQ_MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT)
-#define HARDIRQ_MASK	(__IRQ_MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT)
-#define NMI_MASK	(__IRQ_MASK(NMI_BITS)     << NMI_SHIFT)
-
-#define PREEMPT_OFFSET	(1UL << PREEMPT_SHIFT)
-#define SOFTIRQ_OFFSET	(1UL << SOFTIRQ_SHIFT)
-#define HARDIRQ_OFFSET	(1UL << HARDIRQ_SHIFT)
-#define NMI_OFFSET	(1UL << NMI_SHIFT)
-
-#define SOFTIRQ_DISABLE_OFFSET	(2 * SOFTIRQ_OFFSET)
-
-#define PREEMPT_ACTIVE_BITS	1
-#define PREEMPT_ACTIVE_SHIFT	(NMI_SHIFT + NMI_BITS)
-#define PREEMPT_ACTIVE	(__IRQ_MASK(PREEMPT_ACTIVE_BITS) << PREEMPT_ACTIVE_SHIFT)
-
-#define hardirq_count()	(preempt_count() & HARDIRQ_MASK)
-#define softirq_count()	(preempt_count() & SOFTIRQ_MASK)
-#define irq_count()	(preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK \
-				 | NMI_MASK))
-
-/*
- * Are we doing bottom half or hardware interrupt processing?
- * Are we in a softirq context? Interrupt context?
- * in_softirq - Are we currently processing softirq or have bh disabled?
- * in_serving_softirq - Are we currently processing softirq?
- */
-#define in_irq()		(hardirq_count())
-#define in_softirq()		(softirq_count())
-#define in_interrupt()		(irq_count())
-#define in_serving_softirq()	(softirq_count() & SOFTIRQ_OFFSET)
-
-/*
- * Are we in NMI context?
- */
-#define in_nmi()	(preempt_count() & NMI_MASK)
-
-#if defined(CONFIG_PREEMPT_COUNT)
-# define PREEMPT_CHECK_OFFSET 1
-#else
-# define PREEMPT_CHECK_OFFSET 0
-#endif
-
-/*
- * The preempt_count offset needed for things like:
- *
- *  spin_lock_bh()
- *
- * Which need to disable both preemption (CONFIG_PREEMPT_COUNT) and
- * softirqs, such that unlock sequences of:
- *
- *  spin_unlock();
- *  local_bh_enable();
- *
- * Work as expected.
- */
-#define SOFTIRQ_LOCK_OFFSET (SOFTIRQ_DISABLE_OFFSET + PREEMPT_CHECK_OFFSET)
-
-/*
- * Are we running in atomic context?  WARNING: this macro cannot
- * always detect atomic context; in particular, it cannot know about
- * held spinlocks in non-preemptible kernels.  Thus it should not be
- * used in the general case to determine whether sleeping is possible.
- * Do not use in_atomic() in driver code.
- */
-#define in_atomic()	((preempt_count() & ~PREEMPT_ACTIVE) != 0)
-
-/*
- * Check whether we were atomic before we did preempt_disable():
- * (used by the scheduler, *after* releasing the kernel lock)
- */
-#define in_atomic_preempt_off() \
-		((preempt_count() & ~PREEMPT_ACTIVE) != PREEMPT_CHECK_OFFSET)
-
-#ifdef CONFIG_PREEMPT_COUNT
-# define preemptible()	(preempt_count() == 0 && !irqs_disabled())
-#else
-# define preemptible()	0
-#endif
-
-#endif /* LINUX_PREEMPT_MASK_H */