summaryrefslogtreecommitdiff
path: root/include/linux/regulator/driver.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/regulator/driver.h')
-rw-r--r--include/linux/regulator/driver.h11
1 files changed, 11 insertions, 0 deletions
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index fffa688ac3a7..4db9fbe4889d 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -91,6 +91,7 @@ struct regulator_linear_range {
* @set_current_limit: Configure a limit for a current-limited regulator.
* The driver should select the current closest to max_uA.
* @get_current_limit: Get the configured limit for a current-limited regulator.
+ * @set_input_current_limit: Configure an input limit.
*
* @set_mode: Set the configured operating mode for the regulator.
* @get_mode: Get the configured operating mode for the regulator.
@@ -111,6 +112,7 @@ struct regulator_linear_range {
* to stabilise after being set to a new value, in microseconds.
* The function provides the from and to voltage selector, the
* function should return the worst case.
+ * @set_soft_start: Enable soft start for the regulator.
*
* @set_suspend_voltage: Set the voltage for the regulator when the system
* is suspended.
@@ -121,6 +123,9 @@ struct regulator_linear_range {
* @set_suspend_mode: Set the operating mode for the regulator when the
* system is suspended.
*
+ * @set_pull_down: Configure the regulator to pull down when the regulator
+ * is disabled.
+ *
* This struct describes regulator operations which can be implemented by
* regulator chip drivers.
*/
@@ -142,6 +147,8 @@ struct regulator_ops {
int min_uA, int max_uA);
int (*get_current_limit) (struct regulator_dev *);
+ int (*set_input_current_limit) (struct regulator_dev *, int lim_uA);
+
/* enable/disable regulator */
int (*enable) (struct regulator_dev *);
int (*disable) (struct regulator_dev *);
@@ -158,6 +165,8 @@ struct regulator_ops {
unsigned int old_selector,
unsigned int new_selector);
+ int (*set_soft_start) (struct regulator_dev *);
+
/* report regulator status ... most other accessors report
* control inputs, this reports results of combining inputs
* from Linux (and other sources) with the actual load.
@@ -187,6 +196,8 @@ struct regulator_ops {
/* set regulator suspend operating mode (defined in consumer.h) */
int (*set_suspend_mode) (struct regulator_dev *, unsigned int mode);
+
+ int (*set_pull_down) (struct regulator_dev *);
};
/*