summaryrefslogtreecommitdiff
path: root/include/linux/serial.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux/serial.h')
-rw-r--r--include/linux/serial.h188
1 files changed, 188 insertions, 0 deletions
diff --git a/include/linux/serial.h b/include/linux/serial.h
new file mode 100644
index 000000000000..00145822fb74
--- /dev/null
+++ b/include/linux/serial.h
@@ -0,0 +1,188 @@
+/*
+ * include/linux/serial.h
+ *
+ * Copyright (C) 1992 by Theodore Ts'o.
+ *
+ * Redistribution of this file is permitted under the terms of the GNU
+ * Public License (GPL)
+ */
+
+#ifndef _LINUX_SERIAL_H
+#define _LINUX_SERIAL_H
+
+#ifdef __KERNEL__
+#include <asm/page.h>
+
+/*
+ * Counters of the input lines (CTS, DSR, RI, CD) interrupts
+ */
+
+struct async_icount {
+ __u32 cts, dsr, rng, dcd, tx, rx;
+ __u32 frame, parity, overrun, brk;
+ __u32 buf_overrun;
+};
+
+/*
+ * The size of the serial xmit buffer is 1 page, or 4096 bytes
+ */
+#define SERIAL_XMIT_SIZE PAGE_SIZE
+
+#endif
+
+struct serial_struct {
+ int type;
+ int line;
+ unsigned int port;
+ int irq;
+ int flags;
+ int xmit_fifo_size;
+ int custom_divisor;
+ int baud_base;
+ unsigned short close_delay;
+ char io_type;
+ char reserved_char[1];
+ int hub6;
+ unsigned short closing_wait; /* time to wait before closing */
+ unsigned short closing_wait2; /* no longer used... */
+ unsigned char *iomem_base;
+ unsigned short iomem_reg_shift;
+ unsigned int port_high;
+ unsigned long iomap_base; /* cookie passed into ioremap */
+};
+
+/*
+ * For the close wait times, 0 means wait forever for serial port to
+ * flush its output. 65535 means don't wait at all.
+ */
+#define ASYNC_CLOSING_WAIT_INF 0
+#define ASYNC_CLOSING_WAIT_NONE 65535
+
+/*
+ * These are the supported serial types.
+ */
+#define PORT_UNKNOWN 0
+#define PORT_8250 1
+#define PORT_16450 2
+#define PORT_16550 3
+#define PORT_16550A 4
+#define PORT_CIRRUS 5 /* usurped by cyclades.c */
+#define PORT_16650 6
+#define PORT_16650V2 7
+#define PORT_16750 8
+#define PORT_STARTECH 9 /* usurped by cyclades.c */
+#define PORT_16C950 10 /* Oxford Semiconductor */
+#define PORT_16654 11
+#define PORT_16850 12
+#define PORT_RSA 13 /* RSA-DV II/S card */
+#define PORT_MAX 13
+
+#define SERIAL_IO_PORT 0
+#define SERIAL_IO_HUB6 1
+#define SERIAL_IO_MEM 2
+
+struct serial_uart_config {
+ char *name;
+ int dfl_xmit_fifo_size;
+ int flags;
+};
+
+#define UART_CLEAR_FIFO 0x01
+#define UART_USE_FIFO 0x02
+#define UART_STARTECH 0x04
+#define UART_NATSEMI 0x08
+
+/*
+ * Definitions for async_struct (and serial_struct) flags field
+ */
+#define ASYNC_HUP_NOTIFY 0x0001 /* Notify getty on hangups and closes
+ on the callout port */
+#define ASYNC_FOURPORT 0x0002 /* Set OU1, OUT2 per AST Fourport settings */
+#define ASYNC_SAK 0x0004 /* Secure Attention Key (Orange book) */
+#define ASYNC_SPLIT_TERMIOS 0x0008 /* Separate termios for dialin/callout */
+
+#define ASYNC_SPD_MASK 0x1030
+#define ASYNC_SPD_HI 0x0010 /* Use 56000 instead of 38400 bps */
+
+#define ASYNC_SPD_VHI 0x0020 /* Use 115200 instead of 38400 bps */
+#define ASYNC_SPD_CUST 0x0030 /* Use user-specified divisor */
+
+#define ASYNC_SKIP_TEST 0x0040 /* Skip UART test during autoconfiguration */
+#define ASYNC_AUTO_IRQ 0x0080 /* Do automatic IRQ during autoconfiguration */
+#define ASYNC_SESSION_LOCKOUT 0x0100 /* Lock out cua opens based on session */
+#define ASYNC_PGRP_LOCKOUT 0x0200 /* Lock out cua opens based on pgrp */
+#define ASYNC_CALLOUT_NOHUP 0x0400 /* Don't do hangups for cua device */
+
+#define ASYNC_HARDPPS_CD 0x0800 /* Call hardpps when CD goes high */
+
+#define ASYNC_SPD_SHI 0x1000 /* Use 230400 instead of 38400 bps */
+#define ASYNC_SPD_WARP 0x1010 /* Use 460800 instead of 38400 bps */
+
+#define ASYNC_LOW_LATENCY 0x2000 /* Request low latency behaviour */
+
+#define ASYNC_BUGGY_UART 0x4000 /* This is a buggy UART, skip some safety
+ * checks. Note: can be dangerous! */
+
+#define ASYNC_AUTOPROBE 0x8000 /* Port was autoprobed by PCI or PNP code */
+
+#define ASYNC_FLAGS 0x7FFF /* Possible legal async flags */
+#define ASYNC_USR_MASK 0x3430 /* Legal flags that non-privileged
+ * users can set or reset */
+
+/* Internal flags used only by kernel/chr_drv/serial.c */
+#define ASYNC_INITIALIZED 0x80000000 /* Serial port was initialized */
+#define ASYNC_NORMAL_ACTIVE 0x20000000 /* Normal device is active */
+#define ASYNC_BOOT_AUTOCONF 0x10000000 /* Autoconfigure port on bootup */
+#define ASYNC_CLOSING 0x08000000 /* Serial port is closing */
+#define ASYNC_CTS_FLOW 0x04000000 /* Do CTS flow control */
+#define ASYNC_CHECK_CD 0x02000000 /* i.e., CLOCAL */
+#define ASYNC_SHARE_IRQ 0x01000000 /* for multifunction cards
+ --- no longer used */
+#define ASYNC_CONS_FLOW 0x00800000 /* flow control for console */
+
+#define ASYNC_BOOT_ONLYMCA 0x00400000 /* Probe only if MCA bus */
+#define ASYNC_INTERNAL_FLAGS 0xFFC00000 /* Internal flags */
+
+/*
+ * Multiport serial configuration structure --- external structure
+ */
+struct serial_multiport_struct {
+ int irq;
+ int port1;
+ unsigned char mask1, match1;
+ int port2;
+ unsigned char mask2, match2;
+ int port3;
+ unsigned char mask3, match3;
+ int port4;
+ unsigned char mask4, match4;
+ int port_monitor;
+ int reserved[32];
+};
+
+/*
+ * Serial input interrupt line counters -- external structure
+ * Four lines can interrupt: CTS, DSR, RI, DCD
+ */
+struct serial_icounter_struct {
+ int cts, dsr, rng, dcd;
+ int rx, tx;
+ int frame, overrun, parity, brk;
+ int buf_overrun;
+ int reserved[9];
+};
+
+
+#ifdef __KERNEL__
+/* Export to allow PCMCIA to use this - Dave Hinds */
+extern int register_serial(struct serial_struct *req);
+extern void unregister_serial(int line);
+
+/* Allow architectures to override entries in serial8250_ports[] at run time: */
+struct uart_port; /* forward declaration */
+extern int early_serial_setup(struct uart_port *port);
+extern int early_serial_console_init(char *options);
+extern int serial8250_start_console(struct uart_port *port, char *options);
+
+#endif /* __KERNEL__ */
+#endif /* _LINUX_SERIAL_H */