diff options
Diffstat (limited to 'include/linux/soc')
| -rw-r--r-- | include/linux/soc/mediatek/mtk_wed.h | 3 | ||||
| -rw-r--r-- | include/linux/soc/mmp/cputype.h | 24 | ||||
| -rw-r--r-- | include/linux/soc/samsung/s3c-adc.h | 32 | ||||
| -rw-r--r-- | include/linux/soc/samsung/s3c-cpu-freq.h | 145 | ||||
| -rw-r--r-- | include/linux/soc/samsung/s3c-cpufreq-core.h | 299 | ||||
| -rw-r--r-- | include/linux/soc/samsung/s3c-pm.h | 58 | ||||
| -rw-r--r-- | include/linux/soc/ti/omap1-io.h | 4 | ||||
| -rw-r--r-- | include/linux/soc/ti/omap1-soc.h | 35 |
8 files changed, 5 insertions, 595 deletions
diff --git a/include/linux/soc/mediatek/mtk_wed.h b/include/linux/soc/mediatek/mtk_wed.h index a0746d4aec20..fd0b0605cf90 100644 --- a/include/linux/soc/mediatek/mtk_wed.h +++ b/include/linux/soc/mediatek/mtk_wed.h @@ -103,7 +103,6 @@ struct mtk_wed_device { struct { int size; - struct page_frag_cache rx_page; struct mtk_rxbm_desc *desc; dma_addr_t desc_phys; } rx_buf_ring; @@ -151,6 +150,8 @@ struct mtk_wed_device { void (*release_rx_buf)(struct mtk_wed_device *wed); void (*update_wo_rx_stats)(struct mtk_wed_device *wed, struct mtk_wed_wo_rx_stats *stats); + int (*reset)(struct mtk_wed_device *wed); + void (*reset_complete)(struct mtk_wed_device *wed); } wlan; #endif }; diff --git a/include/linux/soc/mmp/cputype.h b/include/linux/soc/mmp/cputype.h index 221790761e8e..f13d127fadc4 100644 --- a/include/linux/soc/mmp/cputype.h +++ b/include/linux/soc/mmp/cputype.h @@ -26,29 +26,7 @@ extern unsigned int mmp_chip_id; -#ifdef CONFIG_CPU_PXA168 -static inline int cpu_is_pxa168(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - ((mmp_chip_id & 0xfff) == 0x168); -} -#else -#define cpu_is_pxa168() (0) -#endif - -/* cpu_is_pxa910() is shared on both pxa910 and pxa920 */ -#ifdef CONFIG_CPU_PXA910 -static inline int cpu_is_pxa910(void) -{ - return (((read_cpuid_id() >> 8) & 0xff) == 0x84) && - (((mmp_chip_id & 0xfff) == 0x910) || - ((mmp_chip_id & 0xfff) == 0x920)); -} -#else -#define cpu_is_pxa910() (0) -#endif - -#if defined(CONFIG_CPU_MMP2) || defined(CONFIG_MACH_MMP2_DT) +#if defined(CONFIG_MACH_MMP2_DT) static inline int cpu_is_mmp2(void) { return (((read_cpuid_id() >> 8) & 0xff) == 0x58) && diff --git a/include/linux/soc/samsung/s3c-adc.h b/include/linux/soc/samsung/s3c-adc.h deleted file mode 100644 index 591c94ef957d..000000000000 --- a/include/linux/soc/samsung/s3c-adc.h +++ /dev/null @@ -1,32 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C ADC driver information - */ - -#ifndef __LINUX_SOC_SAMSUNG_S3C_ADC_H -#define __LINUX_SOC_SAMSUNG_S3C_ADC_H __FILE__ - -struct s3c_adc_client; -struct platform_device; - -extern int s3c_adc_start(struct s3c_adc_client *client, - unsigned int channel, unsigned int nr_samples); - -extern int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch); - -extern struct s3c_adc_client * - s3c_adc_register(struct platform_device *pdev, - void (*select)(struct s3c_adc_client *client, - unsigned selected), - void (*conv)(struct s3c_adc_client *client, - unsigned d0, unsigned d1, - unsigned *samples_left), - unsigned int is_ts); - -extern void s3c_adc_release(struct s3c_adc_client *client); - -#endif /* __LINUX_SOC_SAMSUNG_S3C_ADC_H */ diff --git a/include/linux/soc/samsung/s3c-cpu-freq.h b/include/linux/soc/samsung/s3c-cpu-freq.h deleted file mode 100644 index 63e88fd5dea2..000000000000 --- a/include/linux/soc/samsung/s3c-cpu-freq.h +++ /dev/null @@ -1,145 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2006-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C CPU frequency scaling support - driver and board - */ -#ifndef __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H -#define __LINUX_SOC_SAMSUNG_S3C_CPU_FREQ_H - -#include <linux/cpufreq.h> - -struct s3c_cpufreq_info; -struct s3c_cpufreq_board; -struct s3c_iotimings; - -/** - * struct s3c_freq - frequency information (mainly for core drivers) - * @fclk: The FCLK frequency in Hz. - * @armclk: The ARMCLK frequency in Hz. - * @hclk_tns: HCLK cycle time in 10ths of nano-seconds. - * @hclk: The HCLK frequency in Hz. - * @pclk: The PCLK frequency in Hz. - * - * This contains the frequency information about the current configuration - * mainly for the core drivers to ensure we do not end up passing about - * a large number of parameters. - * - * The @hclk_tns field is a useful cache for the parts of the drivers that - * need to calculate IO timings and suchlike. - */ -struct s3c_freq { - unsigned long fclk; - unsigned long armclk; - unsigned long hclk_tns; /* in 10ths of ns */ - unsigned long hclk; - unsigned long pclk; -}; - -/** - * struct s3c_cpufreq_freqs - s3c cpufreq notification information. - * @freqs: The cpufreq setting information. - * @old: The old clock settings. - * @new: The new clock settings. - * @pll_changing: Set if the PLL is changing. - * - * Wrapper 'struct cpufreq_freqs' so that any drivers receiving the - * notification can use this information that is not provided by just - * having the core frequency alone. - * - * The pll_changing flag is used to indicate if the PLL itself is - * being set during this change. This is important as the clocks - * will temporarily be set to the XTAL clock during this time, so - * drivers may want to close down their output during this time. - * - * Note, this is not being used by any current drivers and therefore - * may be removed in the future. - */ -struct s3c_cpufreq_freqs { - struct cpufreq_freqs freqs; - struct s3c_freq old; - struct s3c_freq new; - - unsigned int pll_changing:1; -}; - -#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) - -/** - * struct s3c_clkdivs - clock divisor information - * @p_divisor: Divisor from FCLK to PCLK. - * @h_divisor: Divisor from FCLK to HCLK. - * @arm_divisor: Divisor from FCLK to ARMCLK (not all CPUs). - * @dvs: Non-zero if using DVS mode for ARMCLK. - * - * Divisor settings for the core clocks. - */ -struct s3c_clkdivs { - int p_divisor; - int h_divisor; - int arm_divisor; - unsigned char dvs; -}; - -#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) - -/** - * struct s3c_pllval - PLL value entry. - * @freq: The frequency for this entry in Hz. - * @pll_reg: The PLL register setting for this PLL value. - */ -struct s3c_pllval { - unsigned long freq; - unsigned long pll_reg; -}; - -/** - * struct s3c_cpufreq_board - per-board cpu frequency informatin - * @refresh: The SDRAM refresh period in nanoseconds. - * @auto_io: Set if the IO timing settings should be generated from the - * initialisation time hardware registers. - * @need_io: Set if the board has external IO on any of the chipselect - * lines that will require the hardware timing registers to be - * updated on a clock change. - * @max: The maxium frequency limits for the system. Any field that - * is left at zero will use the CPU's settings. - * - * This contains the board specific settings that affect how the CPU - * drivers chose settings. These include the memory refresh and IO - * timing information. - * - * Registration depends on the driver being used, the ARMCLK only - * implementation does not currently need this but the older style - * driver requires this to be available. - */ -struct s3c_cpufreq_board { - unsigned int refresh; - unsigned int auto_io:1; /* automatically init io timings. */ - unsigned int need_io:1; /* set if needs io timing support. */ - - /* any non-zero field in here is taken as an upper limit. */ - struct s3c_freq max; /* frequency limits */ -}; - -/* Things depending on frequency scaling. */ -#ifdef CONFIG_ARM_S3C_CPUFREQ -#define __init_or_cpufreq -#else -#define __init_or_cpufreq __init -#endif - -/* Board functions */ - -#ifdef CONFIG_ARM_S3C_CPUFREQ -extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); -#else - -static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) -{ - return 0; -} -#endif /* CONFIG_ARM_S3C_CPUFREQ */ - -#endif diff --git a/include/linux/soc/samsung/s3c-cpufreq-core.h b/include/linux/soc/samsung/s3c-cpufreq-core.h deleted file mode 100644 index 3b278afb769b..000000000000 --- a/include/linux/soc/samsung/s3c-cpufreq-core.h +++ /dev/null @@ -1,299 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Copyright (c) 2006-2009 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C CPU frequency scaling support - core support - */ -#ifndef __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H -#define __LINUX_SOC_SAMSUNG_S3C_CPUFREQ_CORE_H - -#include <linux/soc/samsung/s3c-cpu-freq.h> - -struct seq_file; - -#define MAX_BANKS (8) -#define S3C2412_MAX_IO (8) - -/** - * struct s3c2410_iobank_timing - IO bank timings for S3C2410 style timings - * @bankcon: The cached version of settings in this structure. - * @tacp: - * @tacs: Time from address valid to nCS asserted. - * @tcos: Time from nCS asserted to nOE or nWE asserted. - * @tacc: Time that nOE or nWE is asserted. - * @tcoh: Time nCS is held after nOE or nWE are released. - * @tcah: Time address is held for after - * @nwait_en: Whether nWAIT is enabled for this bank. - * - * This structure represents the IO timings for a S3C2410 style IO bank - * used by the CPU frequency support if it needs to change the settings - * of the IO. - */ -struct s3c2410_iobank_timing { - unsigned long bankcon; - unsigned int tacp; - unsigned int tacs; - unsigned int tcos; - unsigned int tacc; - unsigned int tcoh; /* nCS hold after nOE/nWE */ - unsigned int tcah; /* Address hold after nCS */ - unsigned char nwait_en; /* nWait enabled for bank. */ -}; - -/** - * struct s3c2412_iobank_timing - io timings for PL092 (S3C2412) style IO - * @idcy: The idle cycle time between transactions. - * @wstrd: nCS release to end of read cycle. - * @wstwr: nCS release to end of write cycle. - * @wstoen: nCS assertion to nOE assertion time. - * @wstwen: nCS assertion to nWE assertion time. - * @wstbrd: Burst ready delay. - * @smbidcyr: Register cache for smbidcyr value. - * @smbwstrd: Register cache for smbwstrd value. - * @smbwstwr: Register cache for smbwstwr value. - * @smbwstoen: Register cache for smbwstoen value. - * @smbwstwen: Register cache for smbwstwen value. - * @smbwstbrd: Register cache for smbwstbrd value. - * - * Timing information for a IO bank on an S3C2412 or similar system which - * uses a PL093 block. - */ -struct s3c2412_iobank_timing { - unsigned int idcy; - unsigned int wstrd; - unsigned int wstwr; - unsigned int wstoen; - unsigned int wstwen; - unsigned int wstbrd; - - /* register cache */ - unsigned char smbidcyr; - unsigned char smbwstrd; - unsigned char smbwstwr; - unsigned char smbwstoen; - unsigned char smbwstwen; - unsigned char smbwstbrd; -}; - -union s3c_iobank { - struct s3c2410_iobank_timing *io_2410; - struct s3c2412_iobank_timing *io_2412; -}; - -/** - * struct s3c_iotimings - Chip IO timings holder - * @bank: The timings for each IO bank. - */ -struct s3c_iotimings { - union s3c_iobank bank[MAX_BANKS]; -}; - -/** - * struct s3c_plltab - PLL table information. - * @vals: List of PLL values. - * @size: Size of the PLL table @vals. - */ -struct s3c_plltab { - struct s3c_pllval *vals; - int size; -}; - -/** - * struct s3c_cpufreq_config - current cpu frequency configuration - * @freq: The current settings for the core clocks. - * @max: Maxium settings, derived from core, board and user settings. - * @pll: The PLL table entry for the current PLL settings. - * @divs: The divisor settings for the core clocks. - * @info: The current core driver information. - * @board: The information for the board we are running on. - * @lock_pll: Set if the PLL settings cannot be changed. - * - * This is for the core drivers that need to know information about - * the current settings and values. It should not be needed by any - * device drivers. -*/ -struct s3c_cpufreq_config { - struct s3c_freq freq; - struct s3c_freq max; - struct clk *mpll; - struct cpufreq_frequency_table pll; - struct s3c_clkdivs divs; - struct s3c_cpufreq_info *info; /* for core, not drivers */ - struct s3c_cpufreq_board *board; - - unsigned int lock_pll:1; -}; - -/** - * struct s3c_cpufreq_info - Information for the CPU frequency driver. - * @name: The name of this implementation. - * @max: The maximum frequencies for the system. - * @latency: Transition latency to give to cpufreq. - * @locktime_m: The lock-time in uS for the MPLL. - * @locktime_u: The lock-time in uS for the UPLL. - * @locttime_bits: The number of bits each LOCKTIME field. - * @need_pll: Set if this driver needs to change the PLL values to achieve - * any frequency changes. This is really only need by devices like the - * S3C2410 where there is no or limited divider between the PLL and the - * ARMCLK. - * @get_iotiming: Get the current IO timing data, mainly for use at start. - * @set_iotiming: Update the IO timings from the cached copies calculated - * from the @calc_iotiming entry when changing the frequency. - * @calc_iotiming: Calculate and update the cached copies of the IO timings - * from the newly calculated frequencies. - * @calc_freqtable: Calculate (fill in) the given frequency table from the - * current frequency configuration. If the table passed in is NULL, - * then the return is the number of elements to be filled for allocation - * of the table. - * @set_refresh: Set the memory refresh configuration. - * @set_fvco: Set the PLL frequencies. - * @set_divs: Update the clock divisors. - * @calc_divs: Calculate the clock divisors. - */ -struct s3c_cpufreq_info { - const char *name; - struct s3c_freq max; - - unsigned int latency; - - unsigned int locktime_m; - unsigned int locktime_u; - unsigned char locktime_bits; - - unsigned int need_pll:1; - - /* driver routines */ - - int (*get_iotiming)(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - - void (*set_iotiming)(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - - int (*calc_iotiming)(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - - int (*calc_freqtable)(struct s3c_cpufreq_config *cfg, - struct cpufreq_frequency_table *t, - size_t table_size); - - void (*debug_io_show)(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - - void (*set_refresh)(struct s3c_cpufreq_config *cfg); - void (*set_fvco)(struct s3c_cpufreq_config *cfg); - void (*set_divs)(struct s3c_cpufreq_config *cfg); - int (*calc_divs)(struct s3c_cpufreq_config *cfg); -}; - -extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); - -extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, - unsigned int plls_no); - -/* exports and utilities for debugfs */ -extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); -extern struct s3c_iotimings *s3c_cpufreq_getiotimings(void); - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS -#define s3c_cpufreq_debugfs_call(x) x -#else -#define s3c_cpufreq_debugfs_call(x) NULL -#endif - -/* Useful utility functions. */ - -extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *); - -/* S3C2410 and compatible exported functions */ - -extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); -extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg); - -#ifdef CONFIG_S3C2410_IOTIMING -extern void s3c2410_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - -extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot); - -extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - -extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot); -#else -#define s3c2410_iotiming_debugfs NULL -#define s3c2410_iotiming_calc NULL -#define s3c2410_iotiming_get NULL -#define s3c2410_iotiming_set NULL -#endif /* CONFIG_S3C2410_IOTIMING */ - -/* S3C2412 compatible routines */ - -#ifdef CONFIG_S3C2412_IOTIMING -extern void s3c2412_iotiming_debugfs(struct seq_file *seq, - struct s3c_cpufreq_config *cfg, - union s3c_iobank *iob); - -extern int s3c2412_iotiming_get(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *timings); - -extern int s3c2412_iotiming_calc(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot); - -extern void s3c2412_iotiming_set(struct s3c_cpufreq_config *cfg, - struct s3c_iotimings *iot); -extern void s3c2412_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg); -#else -#define s3c2412_iotiming_debugfs NULL -#define s3c2412_iotiming_calc NULL -#define s3c2412_iotiming_get NULL -#define s3c2412_iotiming_set NULL -#endif /* CONFIG_S3C2412_IOTIMING */ - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG -#define s3c_freq_dbg(x...) printk(KERN_INFO x) -#else -#define s3c_freq_dbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_DEBUG */ - -#ifdef CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG -#define s3c_freq_iodbg(x...) printk(KERN_INFO x) -#else -#define s3c_freq_iodbg(x...) do { if (0) printk(x); } while (0) -#endif /* CONFIG_ARM_S3C24XX_CPUFREQ_IODEBUG */ - -static inline int s3c_cpufreq_addfreq(struct cpufreq_frequency_table *table, - int index, size_t table_size, - unsigned int freq) -{ - if (index < 0) - return index; - - if (table) { - if (index >= table_size) - return -ENOMEM; - - s3c_freq_dbg("%s: { %d = %u kHz }\n", - __func__, index, freq); - - table[index].driver_data = index; - table[index].frequency = freq; - } - - return index + 1; -} - -u32 s3c2440_read_camdivn(void); -void s3c2440_write_camdivn(u32 camdiv); -u32 s3c24xx_read_clkdivn(void); -void s3c24xx_write_clkdivn(u32 clkdiv); -u32 s3c24xx_read_mpllcon(void); -void s3c24xx_write_locktime(u32 locktime); - -#endif diff --git a/include/linux/soc/samsung/s3c-pm.h b/include/linux/soc/samsung/s3c-pm.h index f9164559c99f..5b23d85d20ab 100644 --- a/include/linux/soc/samsung/s3c-pm.h +++ b/include/linux/soc/samsung/s3c-pm.h @@ -14,58 +14,10 @@ /* PM debug functions */ -/** - * struct pm_uart_save - save block for core UART - * @ulcon: Save value for S3C2410_ULCON - * @ucon: Save value for S3C2410_UCON - * @ufcon: Save value for S3C2410_UFCON - * @umcon: Save value for S3C2410_UMCON - * @ubrdiv: Save value for S3C2410_UBRDIV - * - * Save block for UART registers to be held over sleep and restored if they - * are needed (say by debug). -*/ -struct pm_uart_save { - u32 ulcon; - u32 ucon; - u32 ufcon; - u32 umcon; - u32 ubrdiv; - u32 udivslot; -}; - -#ifdef CONFIG_SAMSUNG_PM_DEBUG -/** - * s3c_pm_dbg() - low level debug function for use in suspend/resume. - * @msg: The message to print. - * - * This function is used mainly to debug the resume process before the system - * can rely on printk/console output. It uses the low-level debugging output - * routine printascii() to do its work. - */ -extern void s3c_pm_dbg(const char *msg, ...); - -#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt) - -extern void s3c_pm_save_uarts(bool is_s3c24xx); -extern void s3c_pm_restore_uarts(bool is_s3c24xx); - -#ifdef CONFIG_ARCH_S3C64XX -extern void s3c_pm_arch_update_uart(void __iomem *regs, - struct pm_uart_save *save); -#else -static inline void -s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) -{ -} -#endif - -#else #define S3C_PMDBG(fmt...) pr_debug(fmt) static inline void s3c_pm_save_uarts(bool is_s3c24xx) { } static inline void s3c_pm_restore_uarts(bool is_s3c24xx) { } -#endif /* suspend memory checking */ @@ -81,14 +33,4 @@ extern void s3c_pm_check_store(void); #define s3c_pm_check_store() do { } while (0) #endif -/* system device subsystems */ - -extern struct bus_type s3c2410_subsys; -extern struct bus_type s3c2410a_subsys; -extern struct bus_type s3c2412_subsys; -extern struct bus_type s3c2416_subsys; -extern struct bus_type s3c2440_subsys; -extern struct bus_type s3c2442_subsys; -extern struct bus_type s3c2443_subsys; - #endif diff --git a/include/linux/soc/ti/omap1-io.h b/include/linux/soc/ti/omap1-io.h index f7f12728d4a6..9a60f45899d3 100644 --- a/include/linux/soc/ti/omap1-io.h +++ b/include/linux/soc/ti/omap1-io.h @@ -5,7 +5,7 @@ #ifndef __ASSEMBLER__ #include <linux/types.h> -#ifdef CONFIG_ARCH_OMAP1_ANY +#ifdef CONFIG_ARCH_OMAP1 /* * NOTE: Please use ioremap + __raw_read/write where possible instead of these */ @@ -15,7 +15,7 @@ extern u32 omap_readl(u32 pa); extern void omap_writeb(u8 v, u32 pa); extern void omap_writew(u16 v, u32 pa); extern void omap_writel(u32 v, u32 pa); -#else +#elif defined(CONFIG_COMPILE_TEST) static inline u8 omap_readb(u32 pa) { return 0; } static inline u16 omap_readw(u32 pa) { return 0; } static inline u32 omap_readl(u32 pa) { return 0; } diff --git a/include/linux/soc/ti/omap1-soc.h b/include/linux/soc/ti/omap1-soc.h index 81008d400bb6..a42d9aa68648 100644 --- a/include/linux/soc/ti/omap1-soc.h +++ b/include/linux/soc/ti/omap1-soc.h @@ -20,22 +20,6 @@ #undef MULTI_OMAP1 #undef OMAP_NAME -#ifdef CONFIG_ARCH_OMAP730 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap730 -# endif -#endif -#ifdef CONFIG_ARCH_OMAP850 -# ifdef OMAP_NAME -# undef MULTI_OMAP1 -# define MULTI_OMAP1 -# else -# define OMAP_NAME omap850 -# endif -#endif #ifdef CONFIG_ARCH_OMAP15XX # ifdef OMAP_NAME # undef MULTI_OMAP1 @@ -69,7 +53,6 @@ unsigned int omap_rev(void); /* * Macros to group OMAP into cpu classes. * These can be used in most places. - * cpu_is_omap7xx(): True for OMAP730, OMAP850 * cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310 * cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710 */ @@ -89,23 +72,13 @@ static inline int is_omap ##subclass (void) \ return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \ } -IS_OMAP_CLASS(7xx, 0x07) IS_OMAP_CLASS(15xx, 0x15) IS_OMAP_CLASS(16xx, 0x16) -#define cpu_is_omap7xx() 0 #define cpu_is_omap15xx() 0 #define cpu_is_omap16xx() 0 #if defined(MULTI_OMAP1) -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() is_omap7xx() -# endif # if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap15xx # define cpu_is_omap15xx() is_omap15xx() @@ -115,14 +88,6 @@ IS_OMAP_CLASS(16xx, 0x16) # define cpu_is_omap16xx() is_omap16xx() # endif #else -# if defined(CONFIG_ARCH_OMAP730) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif -# if defined(CONFIG_ARCH_OMAP850) -# undef cpu_is_omap7xx -# define cpu_is_omap7xx() 1 -# endif # if defined(CONFIG_ARCH_OMAP15XX) # undef cpu_is_omap15xx # define cpu_is_omap15xx() 1 |