diff options
Diffstat (limited to 'include/linux/usb')
-rw-r--r-- | include/linux/usb/atmel_usba_udc.h | 24 | ||||
-rw-r--r-- | include/linux/usb/audio-v2.h | 9 | ||||
-rw-r--r-- | include/linux/usb/audio-v3.h | 40 | ||||
-rw-r--r-- | include/linux/usb/composite.h | 2 | ||||
-rw-r--r-- | include/linux/usb/gadget.h | 2 | ||||
-rw-r--r-- | include/linux/usb/hcd.h | 2 | ||||
-rw-r--r-- | include/linux/usb/musb.h | 15 | ||||
-rw-r--r-- | include/linux/usb/pd.h | 4 | ||||
-rw-r--r-- | include/linux/usb/phy.h | 36 | ||||
-rw-r--r-- | include/linux/usb/tcpm.h | 10 | ||||
-rw-r--r-- | include/linux/usb/tegra_usb_phy.h | 2 |
11 files changed, 56 insertions, 90 deletions
diff --git a/include/linux/usb/atmel_usba_udc.h b/include/linux/usb/atmel_usba_udc.h deleted file mode 100644 index 9bb00df3b53f..000000000000 --- a/include/linux/usb/atmel_usba_udc.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * Platform data definitions for Atmel USBA gadget driver. - */ -#ifndef __LINUX_USB_USBA_H -#define __LINUX_USB_USBA_H - -struct usba_ep_data { - char *name; - int index; - int fifo_size; - int nr_banks; - int can_dma; - int can_isoc; -}; - -struct usba_platform_data { - int vbus_pin; - int vbus_pin_inverted; - int num_ep; - struct usba_ep_data ep[0]; -}; - -#endif /* __LINUX_USB_USBA_H */ diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h index aaafecf073ff..ba4b3e3327ff 100644 --- a/include/linux/usb/audio-v2.h +++ b/include/linux/usb/audio-v2.h @@ -94,7 +94,7 @@ struct uac_clock_selector_descriptor { __u8 bClockID; __u8 bNrInPins; __u8 baCSourceID[]; - /* bmControls, bAssocTerminal and iClockSource omitted */ + /* bmControls and iClockSource omitted */ } __attribute__((packed)); /* 4.7.2.3 Clock Multiplier Descriptor */ @@ -189,6 +189,13 @@ struct uac2_iso_endpoint_descriptor { #define UAC2_CONTROL_DATA_OVERRUN (3 << 2) #define UAC2_CONTROL_DATA_UNDERRUN (3 << 4) +/* 5.2.5.4.2 Connector Control Parameter Block */ +struct uac2_connectors_ctl_blk { + __u8 bNrChannels; + __le32 bmChannelConfig; + __u8 iChannelNames; +} __attribute__((packed)); + /* 6.1 Interrupt Data Message */ #define UAC2_INTERRUPT_DATA_MSG_VENDOR (1 << 0) diff --git a/include/linux/usb/audio-v3.h b/include/linux/usb/audio-v3.h index a8959aaba0ae..a710e28b5215 100644 --- a/include/linux/usb/audio-v3.h +++ b/include/linux/usb/audio-v3.h @@ -221,6 +221,12 @@ struct uac3_iso_endpoint_descriptor { __le16 wLockDelay; } __attribute__((packed)); +/* 5.2.1.6.1 INSERTION CONTROL PARAMETER BLOCK */ +struct uac3_insertion_ctl_blk { + __u8 bSize; + __u8 bmConInserted; +} __attribute__ ((packed)); + /* 6.1 INTERRUPT DATA MESSAGE */ struct uac3_interrupt_data_msg { __u8 bInfo; @@ -392,4 +398,38 @@ struct uac3_interrupt_data_msg { #define UAC3_AC_ACTIVE_INTERFACE_CONTROL 0x01 #define UAC3_AC_POWER_DOMAIN_CONTROL 0x02 +/* A.23.5 TERMINAL CONTROL SELECTORS */ +#define UAC3_TE_UNDEFINED 0x00 +#define UAC3_TE_INSERTION 0x01 +#define UAC3_TE_OVERLOAD 0x02 +#define UAC3_TE_UNDERFLOW 0x03 +#define UAC3_TE_OVERFLOW 0x04 +#define UAC3_TE_LATENCY 0x05 + +/* BADD predefined Unit/Terminal values */ +#define UAC3_BADD_IT_ID1 1 /* Input Terminal ID1: bTerminalID = 1 */ +#define UAC3_BADD_FU_ID2 2 /* Feature Unit ID2: bUnitID = 2 */ +#define UAC3_BADD_OT_ID3 3 /* Output Terminal ID3: bTerminalID = 3 */ +#define UAC3_BADD_IT_ID4 4 /* Input Terminal ID4: bTerminalID = 4 */ +#define UAC3_BADD_FU_ID5 5 /* Feature Unit ID5: bUnitID = 5 */ +#define UAC3_BADD_OT_ID6 6 /* Output Terminal ID6: bTerminalID = 6 */ +#define UAC3_BADD_FU_ID7 7 /* Feature Unit ID7: bUnitID = 7 */ +#define UAC3_BADD_MU_ID8 8 /* Mixer Unit ID8: bUnitID = 8 */ +#define UAC3_BADD_CS_ID9 9 /* Clock Source Entity ID9: bClockID = 9 */ +#define UAC3_BADD_PD_ID10 10 /* Power Domain ID10: bPowerDomainID = 10 */ +#define UAC3_BADD_PD_ID11 11 /* Power Domain ID11: bPowerDomainID = 11 */ + +/* BADD wMaxPacketSize of AS endpoints */ +#define UAC3_BADD_EP_MAXPSIZE_SYNC_MONO_16 0x0060 +#define UAC3_BADD_EP_MAXPSIZE_ASYNC_MONO_16 0x0062 +#define UAC3_BADD_EP_MAXPSIZE_SYNC_MONO_24 0x0090 +#define UAC3_BADD_EP_MAXPSIZE_ASYNC_MONO_24 0x0093 +#define UAC3_BADD_EP_MAXPSIZE_SYNC_STEREO_16 0x00C0 +#define UAC3_BADD_EP_MAXPSIZE_ASYNC_STEREO_16 0x00C4 +#define UAC3_BADD_EP_MAXPSIZE_SYNC_STEREO_24 0x0120 +#define UAC3_BADD_EP_MAXPSIZE_ASYNC_STEREO_24 0x0126 + +/* BADD sample rate is always fixed to 48kHz */ +#define UAC3_BADD_SAMPLING_RATE 48000 + #endif /* __LINUX_USB_AUDIO_V3_H */ diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 4b6b9283fa7b..8675e145ea8b 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -52,7 +52,7 @@ #define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */ /* big enough to hold our biggest descriptor */ -#define USB_COMP_EP0_BUFSIZ 1024 +#define USB_COMP_EP0_BUFSIZ 4096 /* OS feature descriptor length <= 4kB */ #define USB_COMP_EP0_OS_DESC_BUFSIZ 4096 diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index 847f423ad9b3..e5cd84a0f84a 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -763,7 +763,7 @@ struct usb_gadget_string_container { }; /* put descriptor for string with that id into buf (buflen >= 256) */ -int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf); +int usb_gadget_get_string(const struct usb_gadget_strings *table, int id, u8 *buf); /*-------------------------------------------------------------------------*/ diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index aef50cb2ed1b..34a6ded6f319 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -150,7 +150,6 @@ struct usb_hcd { unsigned rh_pollable:1; /* may we poll the root hub? */ unsigned msix_enabled:1; /* driver has MSI-X enabled? */ unsigned msi_enabled:1; /* driver has MSI enabled? */ - unsigned remove_phy:1; /* auto-remove USB phy */ /* * do not manage the PHY state in the HCD core, instead let the driver * handle this (for example if the PHY can only be turned on after a @@ -261,6 +260,7 @@ struct hc_driver { #define HCD_USB25 0x0030 /* Wireless USB 1.0 (USB 2.5)*/ #define HCD_USB3 0x0040 /* USB 3.0 */ #define HCD_USB31 0x0050 /* USB 3.1 */ +#define HCD_USB32 0x0060 /* USB 3.2 */ #define HCD_MASK 0x0070 #define HCD_BH 0x0100 /* URB complete in BH context */ diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index 9eb908a98033..fc6c77918481 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -67,28 +67,13 @@ struct musb_hdrc_config { /* MUSB configuration-specific details */ unsigned multipoint:1; /* multipoint device */ unsigned dyn_fifo:1 __deprecated; /* supports dynamic fifo sizing */ - unsigned soft_con:1 __deprecated; /* soft connect required */ - unsigned utm_16:1 __deprecated; /* utm data witdh is 16 bits */ - unsigned big_endian:1; /* true if CPU uses big-endian */ - unsigned mult_bulk_tx:1; /* Tx ep required for multbulk pkts */ - unsigned mult_bulk_rx:1; /* Rx ep required for multbulk pkts */ - unsigned high_iso_tx:1; /* Tx ep required for HB iso */ - unsigned high_iso_rx:1; /* Rx ep required for HD iso */ - unsigned dma:1 __deprecated; /* supports DMA */ - unsigned vendor_req:1 __deprecated; /* vendor registers required */ /* need to explicitly de-assert the port reset after resume? */ unsigned host_port_deassert_reset_at_resume:1; u8 num_eps; /* number of endpoints _with_ ep0 */ - u8 dma_channels __deprecated; /* number of dma channels */ - u8 dyn_fifo_size; /* dynamic size in bytes */ - u8 vendor_ctrl __deprecated; /* vendor control reg width */ - u8 vendor_stat __deprecated; /* vendor status reg witdh */ - u8 dma_req_chan __deprecated; /* bitmask for required dma channels */ u8 ram_bits; /* ram address size */ - struct musb_hdrc_eps_bits *eps_bits __deprecated; u32 maximum_speed; }; diff --git a/include/linux/usb/pd.h b/include/linux/usb/pd.h index ff359bdfdc7b..09b570feb297 100644 --- a/include/linux/usb/pd.h +++ b/include/linux/usb/pd.h @@ -103,8 +103,8 @@ enum pd_ext_msg_type { (((cnt) & PD_HEADER_CNT_MASK) << PD_HEADER_CNT_SHIFT) | \ ((ext_hdr) ? PD_HEADER_EXT_HDR : 0)) -#define PD_HEADER_LE(type, pwr, data, id, cnt) \ - cpu_to_le16(PD_HEADER((type), (pwr), (data), PD_REV20, (id), (cnt), (0))) +#define PD_HEADER_LE(type, pwr, data, rev, id, cnt) \ + cpu_to_le16(PD_HEADER((type), (pwr), (data), (rev), (id), (cnt), (0))) static inline unsigned int pd_header_cnt(u16 header) { diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index b7a2625947f5..e4de6bc1f69b 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -157,22 +157,6 @@ struct usb_phy { enum usb_charger_type (*charger_detect)(struct usb_phy *x); }; -/** - * struct usb_phy_bind - represent the binding for the phy - * @dev_name: the device name of the device that will bind to the phy - * @phy_dev_name: the device name of the phy - * @index: used if a single controller uses multiple phys - * @phy: reference to the phy - * @list: to maintain a linked list of the binding information - */ -struct usb_phy_bind { - const char *dev_name; - const char *phy_dev_name; - u8 index; - struct usb_phy *phy; - struct list_head list; -}; - /* for board-specific init logic */ extern int usb_add_phy(struct usb_phy *, enum usb_phy_type type); extern int usb_add_phy_dev(struct usb_phy *); @@ -234,16 +218,12 @@ usb_phy_vbus_off(struct usb_phy *x) extern struct usb_phy *usb_get_phy(enum usb_phy_type type); extern struct usb_phy *devm_usb_get_phy(struct device *dev, enum usb_phy_type type); -extern struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index); -extern struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index); extern struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, const char *phandle, u8 index); extern struct usb_phy *devm_usb_get_phy_by_node(struct device *dev, struct device_node *node, struct notifier_block *nb); extern void usb_put_phy(struct usb_phy *); extern void devm_usb_put_phy(struct device *dev, struct usb_phy *x); -extern int usb_bind_phy(const char *dev_name, u8 index, - const char *phy_dev_name); extern void usb_phy_set_event(struct usb_phy *x, unsigned long event); extern void usb_phy_set_charger_current(struct usb_phy *usb_phy, unsigned int mA); @@ -263,16 +243,6 @@ static inline struct usb_phy *devm_usb_get_phy(struct device *dev, return ERR_PTR(-ENXIO); } -static inline struct usb_phy *usb_get_phy_dev(struct device *dev, u8 index) -{ - return ERR_PTR(-ENXIO); -} - -static inline struct usb_phy *devm_usb_get_phy_dev(struct device *dev, u8 index) -{ - return ERR_PTR(-ENXIO); -} - static inline struct usb_phy *devm_usb_get_phy_by_phandle(struct device *dev, const char *phandle, u8 index) { @@ -293,12 +263,6 @@ static inline void devm_usb_put_phy(struct device *dev, struct usb_phy *x) { } -static inline int usb_bind_phy(const char *dev_name, u8 index, - const char *phy_dev_name) -{ - return -EOPNOTSUPP; -} - static inline void usb_phy_set_event(struct usb_phy *x, unsigned long event) { } diff --git a/include/linux/usb/tcpm.h b/include/linux/usb/tcpm.h index f0d839daeaea..b231b9314240 100644 --- a/include/linux/usb/tcpm.h +++ b/include/linux/usb/tcpm.h @@ -36,6 +36,7 @@ enum typec_cc_polarity { /* Time to wait for TCPC to complete transmit */ #define PD_T_TCPC_TX_TIMEOUT 100 /* in ms */ #define PD_ROLE_SWAP_TIMEOUT (MSEC_PER_SEC * 10) +#define PD_PPS_CTRL_TIMEOUT (MSEC_PER_SEC * 10) enum tcpm_transmit_status { TCPC_TX_SUCCESS = 0, @@ -62,9 +63,6 @@ enum tcpm_transmit_type { * @snk_pdo: PDO parameters sent to partner as response to * PD_CTRL_GET_SINK_CAP message * @nr_snk_pdo: Number of entries in @snk_pdo - * @max_snk_mv: Maximum acceptable sink voltage in mV - * @max_snk_ma: Maximum sink current in mA - * @max_snk_mw: Maximum required sink power in mW * @operating_snk_mw: * Required operating sink power in mW * @type: Port type (TYPEC_PORT_DFP, TYPEC_PORT_UFP, or @@ -85,9 +83,6 @@ struct tcpc_config { const u32 *snk_vdo; unsigned int nr_snk_vdo; - unsigned int max_snk_mv; - unsigned int max_snk_ma; - unsigned int max_snk_mw; unsigned int operating_snk_mw; enum typec_port_type type; @@ -174,9 +169,6 @@ int tcpm_update_source_capabilities(struct tcpm_port *port, const u32 *pdo, unsigned int nr_pdo); int tcpm_update_sink_capabilities(struct tcpm_port *port, const u32 *pdo, unsigned int nr_pdo, - unsigned int max_snk_mv, - unsigned int max_snk_ma, - unsigned int max_snk_mw, unsigned int operating_snk_mw); void tcpm_vbus_change(struct tcpm_port *port); diff --git a/include/linux/usb/tegra_usb_phy.h b/include/linux/usb/tegra_usb_phy.h index d641ea1660b7..0c5c3ea8b2d7 100644 --- a/include/linux/usb/tegra_usb_phy.h +++ b/include/linux/usb/tegra_usb_phy.h @@ -17,6 +17,7 @@ #define __TEGRA_USB_PHY_H #include <linux/clk.h> +#include <linux/reset.h> #include <linux/usb/otg.h> /* @@ -76,6 +77,7 @@ struct tegra_usb_phy { bool is_legacy_phy; bool is_ulpi_phy; int reset_gpio; + struct reset_control *pad_rst; }; void tegra_usb_phy_preresume(struct usb_phy *phy); |