diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/firmware/xlnx-zynqmp.h | 90 | ||||
| -rw-r--r-- | include/linux/gpio/driver.h | 9 | ||||
| -rw-r--r-- | include/linux/gpio/regmap.h | 4 | ||||
| -rw-r--r-- | include/linux/pinctrl/pinconf-generic.h | 10 |
4 files changed, 109 insertions, 4 deletions
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 66e2423d9feb..9d1a5c175065 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -72,6 +72,12 @@ enum pm_api_id { PM_FPGA_LOAD = 22, PM_FPGA_GET_STATUS = 23, PM_GET_CHIPID = 24, + PM_PINCTRL_REQUEST = 28, + PM_PINCTRL_RELEASE = 29, + PM_PINCTRL_GET_FUNCTION = 30, + PM_PINCTRL_SET_FUNCTION = 31, + PM_PINCTRL_CONFIG_PARAM_GET = 32, + PM_PINCTRL_CONFIG_PARAM_SET = 33, PM_IOCTL = 34, PM_QUERY_DATA = 35, PM_CLOCK_ENABLE = 36, @@ -122,6 +128,12 @@ enum pm_query_id { PM_QID_CLOCK_GET_FIXEDFACTOR_PARAMS = 3, PM_QID_CLOCK_GET_PARENTS = 4, PM_QID_CLOCK_GET_ATTRIBUTES = 5, + PM_QID_PINCTRL_GET_NUM_PINS = 6, + PM_QID_PINCTRL_GET_NUM_FUNCTIONS = 7, + PM_QID_PINCTRL_GET_NUM_FUNCTION_GROUPS = 8, + PM_QID_PINCTRL_GET_FUNCTION_NAME = 9, + PM_QID_PINCTRL_GET_FUNCTION_GROUPS = 10, + PM_QID_PINCTRL_GET_PIN_GROUPS = 11, PM_QID_CLOCK_GET_NUM_CLOCKS = 12, PM_QID_CLOCK_GET_MAX_DIVISOR = 13, }; @@ -285,6 +297,44 @@ enum dll_reset_type { PM_DLL_RESET_PULSE = 2, }; +enum pm_pinctrl_config_param { + PM_PINCTRL_CONFIG_SLEW_RATE = 0, + PM_PINCTRL_CONFIG_BIAS_STATUS = 1, + PM_PINCTRL_CONFIG_PULL_CTRL = 2, + PM_PINCTRL_CONFIG_SCHMITT_CMOS = 3, + PM_PINCTRL_CONFIG_DRIVE_STRENGTH = 4, + PM_PINCTRL_CONFIG_VOLTAGE_STATUS = 5, + PM_PINCTRL_CONFIG_TRI_STATE = 6, + PM_PINCTRL_CONFIG_MAX = 7, +}; + +enum pm_pinctrl_slew_rate { + PM_PINCTRL_SLEW_RATE_FAST = 0, + PM_PINCTRL_SLEW_RATE_SLOW = 1, +}; + +enum pm_pinctrl_bias_status { + PM_PINCTRL_BIAS_DISABLE = 0, + PM_PINCTRL_BIAS_ENABLE = 1, +}; + +enum pm_pinctrl_pull_ctrl { + PM_PINCTRL_BIAS_PULL_DOWN = 0, + PM_PINCTRL_BIAS_PULL_UP = 1, +}; + +enum pm_pinctrl_schmitt_cmos { + PM_PINCTRL_INPUT_TYPE_CMOS = 0, + PM_PINCTRL_INPUT_TYPE_SCHMITT = 1, +}; + +enum pm_pinctrl_drive_strength { + PM_PINCTRL_DRIVE_STRENGTH_2MA = 0, + PM_PINCTRL_DRIVE_STRENGTH_4MA = 1, + PM_PINCTRL_DRIVE_STRENGTH_8MA = 2, + PM_PINCTRL_DRIVE_STRENGTH_12MA = 3, +}; + enum zynqmp_pm_shutdown_type { ZYNQMP_PM_SHUTDOWN_TYPE_SHUTDOWN = 0, ZYNQMP_PM_SHUTDOWN_TYPE_RESET = 1, @@ -353,6 +403,14 @@ int zynqmp_pm_write_pggs(u32 index, u32 value); int zynqmp_pm_read_pggs(u32 index, u32 *value); int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype); int zynqmp_pm_set_boot_health_status(u32 value); +int zynqmp_pm_pinctrl_request(const u32 pin); +int zynqmp_pm_pinctrl_release(const u32 pin); +int zynqmp_pm_pinctrl_get_function(const u32 pin, u32 *id); +int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id); +int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param, + u32 *value); +int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param, + u32 value); #else static inline int zynqmp_pm_get_api_version(u32 *version) { @@ -532,6 +590,38 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value) { return -ENODEV; } + +static inline int zynqmp_pm_pinctrl_request(const u32 pin) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_pinctrl_release(const u32 pin) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_pinctrl_get_function(const u32 pin, u32 *id) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_pinctrl_set_function(const u32 pin, const u32 id) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_pinctrl_get_config(const u32 pin, const u32 param, + u32 *value) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_pinctrl_set_config(const u32 pin, const u32 param, + u32 value) +{ + return -ENODEV; +} #endif #endif /* __FIRMWARE_ZYNQMP_H__ */ diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 286de0520574..ecf0032a0995 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -624,8 +624,17 @@ void gpiochip_irq_domain_deactivate(struct irq_domain *domain, bool gpiochip_irqchip_irq_valid(const struct gpio_chip *gc, unsigned int offset); +#ifdef CONFIG_GPIOLIB_IRQCHIP int gpiochip_irqchip_add_domain(struct gpio_chip *gc, struct irq_domain *domain); +#else +static inline int gpiochip_irqchip_add_domain(struct gpio_chip *gc, + struct irq_domain *domain) +{ + WARN_ON(1); + return -EINVAL; +} +#endif int gpiochip_generic_request(struct gpio_chip *gc, unsigned int offset); void gpiochip_generic_free(struct gpio_chip *gc, unsigned int offset); diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h index ad76f3d0a6ba..334dd928042b 100644 --- a/include/linux/gpio/regmap.h +++ b/include/linux/gpio/regmap.h @@ -4,6 +4,7 @@ #define _LINUX_GPIO_REGMAP_H struct device; +struct fwnode_handle; struct gpio_regmap; struct irq_domain; struct regmap; @@ -16,6 +17,8 @@ struct regmap; * @parent: The parent device * @regmap: The regmap used to access the registers * given, the name of the device is used + * @fwnode: (Optional) The firmware node. + * If not given, the fwnode of the parent is used. * @label: (Optional) Descriptive name for GPIO controller. * If not given, the name of the device is used. * @ngpio: Number of GPIOs @@ -57,6 +60,7 @@ struct regmap; struct gpio_regmap_config { struct device *parent; struct regmap *regmap; + struct fwnode_handle *fwnode; const char *label; int ngpio; diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 6aeb711f7cd1..e18ab3d5908f 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -76,10 +76,11 @@ struct pinctrl_map; * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, * schmitt-trigger mode is disabled. - * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power + * @PIN_CONFIG_MODE_LOW_POWER: this will configure the pin for low power * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_MODE_PWM: this will configure the pin for PWM * @PIN_CONFIG_OUTPUT_ENABLE: this will enable the pin's output mode * without driving a value there. For most platforms this reduces to * enable the output buffers and then let the pin controller current @@ -90,6 +91,7 @@ struct pinctrl_map; * value on the line. Use argument 1 to indicate high level, argument 0 to * indicate low level. (Please see Documentation/driver-api/pinctl.rst, * section "GPIO mode pitfalls" for a discussion around this parameter.) + * @PIN_CONFIG_PERSIST_STATE: retain pin state across sleep or controller reset * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. @@ -101,7 +103,6 @@ struct pinctrl_map; * or latch delay (on outputs) this parameter (in a custom format) * specifies the clock skew or latch delay. It typically controls how * many double inverters are put in front of the line. - * @PIN_CONFIG_PERSIST_STATE: retain pin state across sleep or controller reset * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if * you need to pass in custom configurations to the pin controller, use * PIN_CONFIG_END+1 as the base offset. @@ -124,14 +125,15 @@ enum pin_config_param { PIN_CONFIG_INPUT_ENABLE, PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_SCHMITT_ENABLE, - PIN_CONFIG_LOW_POWER_MODE, + PIN_CONFIG_MODE_LOW_POWER, + PIN_CONFIG_MODE_PWM, PIN_CONFIG_OUTPUT_ENABLE, PIN_CONFIG_OUTPUT, + PIN_CONFIG_PERSIST_STATE, PIN_CONFIG_POWER_SOURCE, PIN_CONFIG_SLEEP_HARDWARE_STATE, PIN_CONFIG_SLEW_RATE, PIN_CONFIG_SKEW_DELAY, - PIN_CONFIG_PERSIST_STATE, PIN_CONFIG_END = 0x7F, PIN_CONFIG_MAX = 0xFF, }; |