summaryrefslogtreecommitdiff
path: root/include/linux
diff options
context:
space:
mode:
Diffstat (limited to 'include/linux')
-rw-r--r--include/linux/amd-iommu.h2
-rw-r--r--include/linux/i2c/at24.h35
-rw-r--r--include/linux/ioport.h6
-rw-r--r--include/linux/ivtv.h6
-rw-r--r--include/linux/pci.h105
-rw-r--r--include/linux/pci_regs.h1
-rw-r--r--include/linux/videodev2.h149
7 files changed, 234 insertions, 70 deletions
diff --git a/include/linux/amd-iommu.h b/include/linux/amd-iommu.h
index ef00610837d4..15f6b9edd0b1 100644
--- a/include/linux/amd-iommu.h
+++ b/include/linux/amd-iommu.h
@@ -28,7 +28,7 @@ struct task_struct;
struct pci_dev;
extern int amd_iommu_detect(void);
-
+extern int amd_iommu_init_hardware(void);
/**
* amd_iommu_enable_device_erratum() - Enable erratum workaround for device
diff --git a/include/linux/i2c/at24.h b/include/linux/i2c/at24.h
index 8ace93024d60..285025a9cdc9 100644
--- a/include/linux/i2c/at24.h
+++ b/include/linux/i2c/at24.h
@@ -1,19 +1,42 @@
+/*
+ * at24.h - platform_data for the at24 (generic eeprom) driver
+ * (C) Copyright 2008 by Pengutronix
+ * (C) Copyright 2012 by Wolfram Sang
+ * same license as the driver
+ */
+
#ifndef _LINUX_AT24_H
#define _LINUX_AT24_H
#include <linux/types.h>
#include <linux/memory.h>
-/*
- * As seen through Linux I2C, differences between the most common types of I2C
- * memory include:
- * - How much memory is available (usually specified in bit)?
- * - What write page size does it support?
- * - Special flags (16 bit addresses, read_only, world readable...)?
+/**
+ * struct at24_platform_data - data to set up at24 (generic eeprom) driver
+ * @byte_len: size of eeprom in byte
+ * @page_size: number of byte which can be written in one go
+ * @flags: tunable options, check AT24_FLAG_* defines
+ * @setup: an optional callback invoked after eeprom is probed; enables kernel
+ code to access eeprom via memory_accessor, see example
+ * @context: optional parameter passed to setup()
*
* If you set up a custom eeprom type, please double-check the parameters.
* Especially page_size needs extra care, as you risk data loss if your value
* is bigger than what the chip actually supports!
+ *
+ * An example in pseudo code for a setup() callback:
+ *
+ * void get_mac_addr(struct memory_accessor *mem_acc, void *context)
+ * {
+ * u8 *mac_addr = ethernet_pdata->mac_addr;
+ * off_t offset = context;
+ *
+ * // Read MAC addr from EEPROM
+ * if (mem_acc->read(mem_acc, mac_addr, offset, ETH_ALEN) == ETH_ALEN)
+ * pr_info("Read MAC addr from EEPROM: %pM\n", mac_addr);
+ * }
+ *
+ * This function pointer and context can now be set up in at24_platform_data.
*/
struct at24_platform_data {
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 9d57a71775b5..e885ba23de70 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -23,12 +23,6 @@ struct resource {
struct resource *parent, *sibling, *child;
};
-struct resource_list {
- struct resource_list *next;
- struct resource *res;
- struct pci_dev *dev;
-};
-
/*
* IO resources have these defined flags.
*/
diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h
index 062d20f74322..42bf725751af 100644
--- a/include/linux/ivtv.h
+++ b/include/linux/ivtv.h
@@ -58,7 +58,11 @@ struct ivtv_dma_frame {
__u32 src_height;
};
-#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
+#define IVTV_IOC_DMA_FRAME _IOW ('V', BASE_VIDIOC_PRIVATE+0, struct ivtv_dma_frame)
+
+/* Select the passthrough mode (if the argument is non-zero). In the passthrough
+ mode the output of the encoder is passed immediately into the decoder. */
+#define IVTV_IOC_PASSTHROUGH_MODE _IOW ('V', BASE_VIDIOC_PRIVATE+1, int)
/* Deprecated defines: applications should use the defines from videodev2.h */
#define IVTV_SLICED_TYPE_TELETEXT_B V4L2_MPEG_VBI_IVTV_TELETEXT_B
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 900da5db60ee..e444f5b49118 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -299,7 +299,6 @@ struct pci_dev {
*/
unsigned int irq;
struct resource resource[DEVICE_COUNT_RESOURCE]; /* I/O and memory regions + expansion ROMs */
- resource_size_t fw_addr[DEVICE_COUNT_RESOURCE]; /* FW-assigned addr */
/* These fields are used by common fixups */
unsigned int transparent:1; /* Transparent PCI bridge */
@@ -369,24 +368,17 @@ static inline int pci_channel_offline(struct pci_dev *pdev)
return (pdev->error_state != pci_channel_io_normal);
}
-static inline struct pci_cap_saved_state *pci_find_saved_cap(
- struct pci_dev *pci_dev, char cap)
-{
- struct pci_cap_saved_state *tmp;
- struct hlist_node *pos;
-
- hlist_for_each_entry(tmp, pos, &pci_dev->saved_cap_space, next) {
- if (tmp->cap.cap_nr == cap)
- return tmp;
- }
- return NULL;
-}
+struct pci_host_bridge_window {
+ struct list_head list;
+ struct resource *res; /* host bridge aperture (CPU address) */
+ resource_size_t offset; /* bus address + offset = CPU address */
+};
-static inline void pci_add_saved_cap(struct pci_dev *pci_dev,
- struct pci_cap_saved_state *new_cap)
-{
- hlist_add_head(&new_cap->next, &pci_dev->saved_cap_space);
-}
+struct pci_host_bridge {
+ struct list_head list;
+ struct pci_bus *bus; /* root bus */
+ struct list_head windows; /* pci_host_bridge_windows */
+};
/*
* The first PCI_BRIDGE_RESOURCE_NUM PCI bus resources (those that correspond
@@ -656,6 +648,10 @@ void pci_fixup_cardbus(struct pci_bus *);
/* Generic PCI functions used internally */
+void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
+ struct resource *res);
+void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res,
+ struct pci_bus_region *region);
void pcibios_scan_specific_bus(int busn);
extern struct pci_bus *pci_find_bus(int domain, int busnr);
void pci_bus_add_devices(const struct pci_bus *bus);
@@ -690,7 +686,8 @@ u8 pci_common_swizzle(struct pci_dev *dev, u8 *pinp);
extern struct pci_dev *pci_dev_get(struct pci_dev *dev);
extern void pci_dev_put(struct pci_dev *dev);
extern void pci_remove_bus(struct pci_bus *b);
-extern void pci_remove_bus_device(struct pci_dev *dev);
+extern void __pci_remove_bus_device(struct pci_dev *dev);
+extern void pci_stop_and_remove_bus_device(struct pci_dev *dev);
extern void pci_stop_bus_device(struct pci_dev *dev);
void pci_setup_cardbus(struct pci_bus *bus);
extern void pci_sort_breadthfirst(void);
@@ -883,6 +880,7 @@ void set_pcie_hotplug_bridge(struct pci_dev *pdev);
/* Functions for PCI Hotplug drivers to use */
int pci_bus_find_capability(struct pci_bus *bus, unsigned int devfn, int cap);
#ifdef CONFIG_HOTPLUG
+unsigned int pci_rescan_bus_bridge_resize(struct pci_dev *bridge);
unsigned int pci_rescan_bus(struct pci_bus *bus);
#endif
@@ -892,13 +890,13 @@ ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void
int pci_vpd_truncate(struct pci_dev *dev, size_t size);
/* Helper functions for low-level code (drivers/pci/setup-[bus,res].c) */
+resource_size_t pcibios_retrieve_fw_addr(struct pci_dev *dev, int idx);
void pci_bus_assign_resources(const struct pci_bus *bus);
void pci_bus_size_bridges(struct pci_bus *bus);
int pci_claim_resource(struct pci_dev *, int);
void pci_assign_unassigned_resources(void);
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
void pdev_enable_device(struct pci_dev *);
-void pdev_sort_resources(struct pci_dev *, struct resource_list *);
int pci_enable_resources(struct pci_dev *, int mask);
void pci_fixup_irqs(u8 (*)(struct pci_dev *, u8 *),
int (*)(const struct pci_dev *, u8, u8));
@@ -915,6 +913,8 @@ void pci_release_selected_regions(struct pci_dev *, int);
/* drivers/pci/bus.c */
void pci_add_resource(struct list_head *resources, struct resource *res);
+void pci_add_resource_offset(struct list_head *resources, struct resource *res,
+ resource_size_t offset);
void pci_free_resource_list(struct list_head *resources);
void pci_bus_add_resource(struct pci_bus *bus, struct resource *res, unsigned int flags);
struct resource *pci_bus_resource_n(const struct pci_bus *bus, int n);
@@ -960,7 +960,7 @@ void pci_unregister_driver(struct pci_driver *dev);
module_driver(__pci_driver, pci_register_driver, \
pci_unregister_driver)
-void pci_remove_behind_bridge(struct pci_dev *dev);
+void pci_stop_and_remove_behind_bridge(struct pci_dev *dev);
struct pci_driver *pci_dev_driver(const struct pci_dev *dev);
int pci_add_dynid(struct pci_driver *drv,
unsigned int vendor, unsigned int device,
@@ -1396,7 +1396,10 @@ static inline void pci_resource_to_user(const struct pci_dev *dev, int bar,
*/
struct pci_fixup {
- u16 vendor, device; /* You can use PCI_ANY_ID here of course */
+ u16 vendor; /* You can use PCI_ANY_ID here of course */
+ u16 device; /* You can use PCI_ANY_ID here of course */
+ u32 class; /* You can use PCI_ANY_ID here too */
+ unsigned int class_shift; /* should be 0, 8, 16 */
void (*hook)(struct pci_dev *dev);
};
@@ -1411,30 +1414,68 @@ enum pci_fixup_pass {
};
/* Anonymous variables would be nice... */
-#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, hook) \
- static const struct pci_fixup __pci_fixup_##name __used \
- __attribute__((__section__(#section))) = { vendor, device, hook };
+#define DECLARE_PCI_FIXUP_SECTION(section, name, vendor, device, class, \
+ class_shift, hook) \
+ static const struct pci_fixup const __pci_fixup_##name __used \
+ __attribute__((__section__(#section), aligned((sizeof(void *))))) \
+ = { vendor, device, class, class_shift, hook };
+
+#define DECLARE_PCI_FIXUP_CLASS_EARLY(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
+ vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_HEADER(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
+ vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_FINAL(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
+ vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_ENABLE(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
+ vendor##device##hook, vendor, device, class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_RESUME(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
+ resume##vendor##device##hook, vendor, device, class, \
+ class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_RESUME_EARLY(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
+ resume_early##vendor##device##hook, vendor, device, \
+ class, class_shift, hook)
+#define DECLARE_PCI_FIXUP_CLASS_SUSPEND(vendor, device, class, \
+ class_shift, hook) \
+ DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
+ suspend##vendor##device##hook, vendor, device, class, \
+ class_shift, hook)
+
#define DECLARE_PCI_FIXUP_EARLY(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_early, \
- vendor##device##hook, vendor, device, hook)
+ vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_HEADER(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_header, \
- vendor##device##hook, vendor, device, hook)
+ vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_FINAL(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_final, \
- vendor##device##hook, vendor, device, hook)
+ vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_ENABLE(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_enable, \
- vendor##device##hook, vendor, device, hook)
+ vendor##device##hook, vendor, device, PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_RESUME(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume, \
- resume##vendor##device##hook, vendor, device, hook)
+ resume##vendor##device##hook, vendor, device, \
+ PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_RESUME_EARLY(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_resume_early, \
- resume_early##vendor##device##hook, vendor, device, hook)
+ resume_early##vendor##device##hook, vendor, device, \
+ PCI_ANY_ID, 0, hook)
#define DECLARE_PCI_FIXUP_SUSPEND(vendor, device, hook) \
DECLARE_PCI_FIXUP_SECTION(.pci_fixup_suspend, \
- suspend##vendor##device##hook, vendor, device, hook)
+ suspend##vendor##device##hook, vendor, device, \
+ PCI_ANY_ID, 0, hook)
#ifdef CONFIG_PCI_QUIRKS
void pci_fixup_device(enum pci_fixup_pass pass, struct pci_dev *dev);
diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
index e41a10f5ae83..4b608f543412 100644
--- a/include/linux/pci_regs.h
+++ b/include/linux/pci_regs.h
@@ -391,6 +391,7 @@
#define PCI_EXP_TYPE_UPSTREAM 0x5 /* Upstream Port */
#define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */
#define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */
+#define PCI_EXP_TYPE_PCIE_BRIDGE 0x8 /* PCI/PCI-X to PCIE Bridge */
#define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */
#define PCI_EXP_TYPE_RC_EC 0xa /* Root Complex Event Collector */
#define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 5e11f8a1f867..c9c9a4680cc5 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -235,16 +235,25 @@ struct v4l2_fract {
__u32 denominator;
};
-/*
- * D R I V E R C A P A B I L I T I E S
- */
+/**
+ * struct v4l2_capability - Describes V4L2 device caps returned by VIDIOC_QUERYCAP
+ *
+ * @driver: name of the driver module (e.g. "bttv")
+ * @card: name of the card (e.g. "Hauppauge WinTV")
+ * @bus_info: name of the bus (e.g. "PCI:" + pci_name(pci_dev) )
+ * @version: KERNEL_VERSION
+ * @capabilities: capabilities of the physical device as a whole
+ * @device_caps: capabilities accessed via this particular device (node)
+ * @reserved: reserved fields for future extensions
+ */
struct v4l2_capability {
- __u8 driver[16]; /* i.e. "bttv" */
- __u8 card[32]; /* i.e. "Hauppauge WinTV" */
- __u8 bus_info[32]; /* "PCI:" + pci_name(pci_dev) */
- __u32 version; /* should use KERNEL_VERSION() */
- __u32 capabilities; /* Device capabilities */
- __u32 reserved[4];
+ __u8 driver[16];
+ __u8 card[32];
+ __u8 bus_info[32];
+ __u32 version;
+ __u32 capabilities;
+ __u32 device_caps;
+ __u32 reserved[3];
};
/* Values for 'capabilities' field */
@@ -274,6 +283,8 @@ struct v4l2_capability {
#define V4L2_CAP_ASYNCIO 0x02000000 /* async I/O */
#define V4L2_CAP_STREAMING 0x04000000 /* streaming I/O ioctls */
+#define V4L2_CAP_DEVICE_CAPS 0x80000000 /* sets device capabilities field */
+
/*
* V I D E O I M A G E F O R M A T
*/
@@ -751,20 +762,20 @@ struct v4l2_crop {
/* Selection targets */
-/* current cropping area */
-#define V4L2_SEL_TGT_CROP_ACTIVE 0
-/* default cropping area */
-#define V4L2_SEL_TGT_CROP_DEFAULT 1
-/* cropping bounds */
-#define V4L2_SEL_TGT_CROP_BOUNDS 2
-/* current composing area */
-#define V4L2_SEL_TGT_COMPOSE_ACTIVE 256
-/* default composing area */
-#define V4L2_SEL_TGT_COMPOSE_DEFAULT 257
-/* composing bounds */
-#define V4L2_SEL_TGT_COMPOSE_BOUNDS 258
-/* current composing area plus all padding pixels */
-#define V4L2_SEL_TGT_COMPOSE_PADDED 259
+/* Current cropping area */
+#define V4L2_SEL_TGT_CROP_ACTIVE 0x0000
+/* Default cropping area */
+#define V4L2_SEL_TGT_CROP_DEFAULT 0x0001
+/* Cropping bounds */
+#define V4L2_SEL_TGT_CROP_BOUNDS 0x0002
+/* Current composing area */
+#define V4L2_SEL_TGT_COMPOSE_ACTIVE 0x0100
+/* Default composing area */
+#define V4L2_SEL_TGT_COMPOSE_DEFAULT 0x0101
+/* Composing bounds */
+#define V4L2_SEL_TGT_COMPOSE_BOUNDS 0x0102
+/* Current composing area plus all padding pixels */
+#define V4L2_SEL_TGT_COMPOSE_PADDED 0x0103
/**
* struct v4l2_selection - selection info
@@ -774,7 +785,7 @@ struct v4l2_crop {
* @r: coordinates of selection window
* @reserved: for future use, rounds structure size to 64 bytes, set to zero
*
- * Hardware may use multiple helper window to process a video stream.
+ * Hardware may use multiple helper windows to process a video stream.
* The structure is used to exchange this selection areas between
* an application and a driver.
*/
@@ -1125,6 +1136,7 @@ struct v4l2_ext_controls {
#define V4L2_CTRL_CLASS_CAMERA 0x009a0000 /* Camera class controls */
#define V4L2_CTRL_CLASS_FM_TX 0x009b0000 /* FM Modulator control class */
#define V4L2_CTRL_CLASS_FLASH 0x009c0000 /* Camera flash controls */
+#define V4L2_CTRL_CLASS_JPEG 0x009d0000 /* JPEG-compression controls */
#define V4L2_CTRL_ID_MASK (0x0fffffff)
#define V4L2_CTRL_ID2CLASS(id) ((id) & 0x0fff0000UL)
@@ -1396,6 +1408,16 @@ enum v4l2_mpeg_audio_ac3_bitrate {
V4L2_MPEG_AUDIO_AC3_BITRATE_576K = 17,
V4L2_MPEG_AUDIO_AC3_BITRATE_640K = 18,
};
+#define V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK (V4L2_CID_MPEG_BASE+112)
+enum v4l2_mpeg_audio_dec_playback {
+ V4L2_MPEG_AUDIO_DEC_PLAYBACK_AUTO = 0,
+ V4L2_MPEG_AUDIO_DEC_PLAYBACK_STEREO = 1,
+ V4L2_MPEG_AUDIO_DEC_PLAYBACK_LEFT = 2,
+ V4L2_MPEG_AUDIO_DEC_PLAYBACK_RIGHT = 3,
+ V4L2_MPEG_AUDIO_DEC_PLAYBACK_MONO = 4,
+ V4L2_MPEG_AUDIO_DEC_PLAYBACK_SWAPPED_STEREO = 5,
+};
+#define V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK (V4L2_CID_MPEG_BASE+113)
/* MPEG video controls specific to multiplexed streams */
#define V4L2_CID_MPEG_VIDEO_ENCODING (V4L2_CID_MPEG_BASE+200)
@@ -1446,6 +1468,9 @@ enum v4l2_mpeg_video_multi_slice_mode {
V4L2_MPEG_VIDEO_MULTI_SICE_MODE_MAX_BYTES = 2,
};
#define V4L2_CID_MPEG_VIDEO_VBV_SIZE (V4L2_CID_MPEG_BASE+222)
+#define V4L2_CID_MPEG_VIDEO_DEC_PTS (V4L2_CID_MPEG_BASE+223)
+#define V4L2_CID_MPEG_VIDEO_DEC_FRAME (V4L2_CID_MPEG_BASE+224)
+
#define V4L2_CID_MPEG_VIDEO_H263_I_FRAME_QP (V4L2_CID_MPEG_BASE+300)
#define V4L2_CID_MPEG_VIDEO_H263_P_FRAME_QP (V4L2_CID_MPEG_BASE+301)
#define V4L2_CID_MPEG_VIDEO_H263_B_FRAME_QP (V4L2_CID_MPEG_BASE+302)
@@ -1734,6 +1759,29 @@ enum v4l2_flash_strobe_source {
#define V4L2_CID_FLASH_CHARGE (V4L2_CID_FLASH_CLASS_BASE + 11)
#define V4L2_CID_FLASH_READY (V4L2_CID_FLASH_CLASS_BASE + 12)
+/* JPEG-class control IDs defined by V4L2 */
+#define V4L2_CID_JPEG_CLASS_BASE (V4L2_CTRL_CLASS_JPEG | 0x900)
+#define V4L2_CID_JPEG_CLASS (V4L2_CTRL_CLASS_JPEG | 1)
+
+#define V4L2_CID_JPEG_CHROMA_SUBSAMPLING (V4L2_CID_JPEG_CLASS_BASE + 1)
+enum v4l2_jpeg_chroma_subsampling {
+ V4L2_JPEG_CHROMA_SUBSAMPLING_444 = 0,
+ V4L2_JPEG_CHROMA_SUBSAMPLING_422 = 1,
+ V4L2_JPEG_CHROMA_SUBSAMPLING_420 = 2,
+ V4L2_JPEG_CHROMA_SUBSAMPLING_411 = 3,
+ V4L2_JPEG_CHROMA_SUBSAMPLING_410 = 4,
+ V4L2_JPEG_CHROMA_SUBSAMPLING_GRAY = 5,
+};
+#define V4L2_CID_JPEG_RESTART_INTERVAL (V4L2_CID_JPEG_CLASS_BASE + 2)
+#define V4L2_CID_JPEG_COMPRESSION_QUALITY (V4L2_CID_JPEG_CLASS_BASE + 3)
+
+#define V4L2_CID_JPEG_ACTIVE_MARKER (V4L2_CID_JPEG_CLASS_BASE + 4)
+#define V4L2_JPEG_ACTIVE_MARKER_APP0 (1 << 0)
+#define V4L2_JPEG_ACTIVE_MARKER_APP1 (1 << 1)
+#define V4L2_JPEG_ACTIVE_MARKER_COM (1 << 16)
+#define V4L2_JPEG_ACTIVE_MARKER_DQT (1 << 17)
+#define V4L2_JPEG_ACTIVE_MARKER_DHT (1 << 18)
+
/*
* T U N I N G
*/
@@ -1897,6 +1945,54 @@ struct v4l2_encoder_cmd {
};
};
+/* Decoder commands */
+#define V4L2_DEC_CMD_START (0)
+#define V4L2_DEC_CMD_STOP (1)
+#define V4L2_DEC_CMD_PAUSE (2)
+#define V4L2_DEC_CMD_RESUME (3)
+
+/* Flags for V4L2_DEC_CMD_START */
+#define V4L2_DEC_CMD_START_MUTE_AUDIO (1 << 0)
+
+/* Flags for V4L2_DEC_CMD_PAUSE */
+#define V4L2_DEC_CMD_PAUSE_TO_BLACK (1 << 0)
+
+/* Flags for V4L2_DEC_CMD_STOP */
+#define V4L2_DEC_CMD_STOP_TO_BLACK (1 << 0)
+#define V4L2_DEC_CMD_STOP_IMMEDIATELY (1 << 1)
+
+/* Play format requirements (returned by the driver): */
+
+/* The decoder has no special format requirements */
+#define V4L2_DEC_START_FMT_NONE (0)
+/* The decoder requires full GOPs */
+#define V4L2_DEC_START_FMT_GOP (1)
+
+/* The structure must be zeroed before use by the application
+ This ensures it can be extended safely in the future. */
+struct v4l2_decoder_cmd {
+ __u32 cmd;
+ __u32 flags;
+ union {
+ struct {
+ __u64 pts;
+ } stop;
+
+ struct {
+ /* 0 or 1000 specifies normal speed,
+ 1 specifies forward single stepping,
+ -1 specifies backward single stepping,
+ >1: playback at speed/1000 of the normal speed,
+ <-1: reverse playback at (-speed/1000) of the normal speed. */
+ __s32 speed;
+ __u32 format;
+ } start;
+
+ struct {
+ __u32 data[16];
+ } raw;
+ };
+};
#endif
@@ -2307,6 +2403,11 @@ struct v4l2_create_buffers {
#define VIDIOC_G_SELECTION _IOWR('V', 94, struct v4l2_selection)
#define VIDIOC_S_SELECTION _IOWR('V', 95, struct v4l2_selection)
+/* Experimental, these two ioctls may change over the next couple of kernel
+ versions. */
+#define VIDIOC_DECODER_CMD _IOWR('V', 96, struct v4l2_decoder_cmd)
+#define VIDIOC_TRY_DECODER_CMD _IOWR('V', 97, struct v4l2_decoder_cmd)
+
/* Reminder: when adding new ioctls please add support for them to
drivers/media/video/v4l2-compat-ioctl32.c as well! */